Skip to contentSkip to conversation

serial: omap: Introduce DM specific omap serial

PATCH New Lokesh Vutla 3 participants 4 messages Aug 27, 2018 – Sep 11, 2018

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 serial: omap: Introduce DM specific omap serial

Add driver model support for OMAP_SERIAL while reusing the functions in ns16550.c

---
Based on the conclusion on the thread[1], added a separate driver for omap uart.

[1] https://patchwork.ozlabs.org/patch/944756/

Changes since v2:
- Dropped enabling OMAP_SERIAL by default for SOC_DA8XX.

 drivers/serial/Kconfig       |   9 +++
 drivers/serial/Makefile      |   1 +
 drivers/serial/ns16550.c     |  47 +------------
 drivers/serial/serial_omap.c | 126 +++++++++++++++++++++++++++++++++++
 4 files changed, 139 insertions(+), 44 deletions(-)
 create mode 100644 drivers/serial/serial_omap.c
drivers/serial/Kconfig +9 -0
index 766e5ced03..41f43af01f 100644
@@ -625,6 +625,15 @@ config MSM_SERIAL
 	  for example APQ8016 and MSM8916.
 	  Single baudrate is supported in current implementation (115200).
 
+config OMAP_SERIAL
+	bool "Support for OMAP specific UART"
+	depends on DM_SERIAL
+	default y if ARCH_OMAP2PLUS
+	select SYS_NS16550
+	help
+	  If you have an TI based SoC and want to use the on-chip serial
+	  port, say Y to this option. If unsure say N.
+
 config OWL_SERIAL
 	bool "Actions Semi OWL UART"
 	depends on DM_SERIAL && ARCH_OWL
drivers/serial/Makefile +1 -0
index 9fa81d855d..03dc29ee2e 100644
@@ -65,6 +65,7 @@ obj-$(CONFIG_MVEBU_A3700_UART) += serial_mvebu_a3700.o
 obj-$(CONFIG_MPC8XX_CONS) += serial_mpc8xx.o
 obj-$(CONFIG_NULLDEV_SERIAL) += serial_nulldev.o
 obj-$(CONFIG_OWL_SERIAL) += serial_owl.o
+obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o
 
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_USB_TTY) += usbtty.o
drivers/serial/ns16550.c +3 -44

71 lines not on this page · raw message

drivers/serial/serial_omap.c new file +126 -0

126 lines not on this page · raw message

Signature · 1 line
2.18.0
#1 lore raw

PATCH v3 1/1 serial: omap: Introduce DM specific omap serial

Quoted 4 lines · Lokesh Vutla

Add driver model support for OMAP_SERIAL while reusing the functions in ns16550.c

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180827/e95988d9/attachment.sig>
#2 lore raw

PATCH v3 1/1 serial: omap: Introduce DM specific omap serial

In reply to Lokesh Vutla
Quoted 4 lines · Lokesh Vutla

Add driver model support for OMAP_SERIAL while reusing the functions in ns16550.c

Works for omap3-evm, omap3-beagle-xm, and am3517-evm. I captured 'dm tree' output below:

OMAP3_EVM # dm tree
Class Probed Driver Name
----------------------------------------

 root       [ + ]   root_drive  root_driver
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 serial     [   ]   ns16550_se  |-- ns16550_serial
 simple_bus [ + ]   generic_si  `-- ocp at 68000000
 simple_bus [   ]   generic_si      |-- l4 at 48000000
 simple_bus [   ]   generic_si      |   `-- scm at 2000
 simple_bus [   ]   generic_si      |       `-- scm_conf at 270
 gpio       [   ]   gpio_omap       |-- gpio at 48310000
 gpio       [   ]   gpio_omap       |-- gpio at 49050000
 gpio       [   ]   gpio_omap       |-- gpio at 49052000
 gpio       [   ]   gpio_omap       |-- gpio at 49054000
 gpio       [   ]   gpio_omap       |-- gpio at 49056000
 gpio       [   ]   gpio_omap       |-- gpio at 49058000
 serial     [ + ]   omap_seria      |-- serial at 4806a000
 serial     [   ]   omap_seria      |-- serial at 4806c000
 serial     [   ]   omap_seria      |-- serial at 49020000
 spi        [   ]   omap3_spi       |-- spi at 48098000
 spi        [   ]   omap3_spi       |-- spi at 4809a000
 spi        [   ]   omap3_spi       |-- spi at 480b8000
 spi        [   ]   omap3_spi       |-- spi at 480ba000
 mmc        [ + ]   omap_hsmmc      |-- mmc at 4809c000
 blk        [   ]   mmc_blk         |   `-- mmc at 4809c000.blk
 mmc        [ + ]   omap_hsmmc      `-- mmc at 480b4000
 blk        [   ]   mmc_blk             `-- mmc at 480b4000.blk

BeagleBoard # dm tree
Class Probed Driver Name
----------------------------------------

 root       [ + ]   root_drive  root_driver
 serial     [   ]   ns16550_se  |-- ns16550_serial
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 simple_bus [ + ]   generic_si  `-- ocp at 68000000
 simple_bus [   ]   generic_si      |-- l4 at 48000000
 simple_bus [   ]   generic_si      |   `-- scm at 2000
 simple_bus [   ]   generic_si      |       `-- scm_conf at 270
 gpio       [ + ]   gpio_omap       |-- gpio at 48310000
 gpio       [ + ]   gpio_omap       |-- gpio at 49050000
 gpio       [ + ]   gpio_omap       |-- gpio at 49052000
 gpio       [ + ]   gpio_omap       |-- gpio at 49054000
 gpio       [ + ]   gpio_omap       |-- gpio at 49056000
 gpio       [ + ]   gpio_omap       |-- gpio at 49058000
 serial     [   ]   omap_seria      |-- serial at 4806a000
 serial     [   ]   omap_seria      |-- serial at 4806c000
 serial     [ + ]   omap_seria      `-- serial at 49020000

AM3517_EVM # dm tree
Class Probed Driver Name
----------------------------------------

 root       [ + ]   root_drive  root_driver
 gpio       [ + ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 gpio       [   ]   gpio_omap   |-- gpio_omap
 simple_bus [ + ]   generic_si  `-- ocp at 68000000
 simple_bus [   ]   generic_si      |-- l4 at 48000000
 simple_bus [   ]   generic_si      |   `-- scm at 2000
 simple_bus [   ]   generic_si      |       `-- scm_conf at 270
 gpio       [   ]   gpio_omap       |-- gpio at 48310000
 gpio       [   ]   gpio_omap       |-- gpio at 49050000
 gpio       [   ]   gpio_omap       |-- gpio at 49052000
 gpio       [ + ]   gpio_omap       |-- gpio at 49054000
 gpio       [   ]   gpio_omap       |-- gpio at 49056000
 gpio       [   ]   gpio_omap       |-- gpio at 49058000
 serial     [   ]   omap_seria      |-- serial at 4806a000
 serial     [   ]   omap_seria      |-- serial at 4806c000
 serial     [ + ]   omap_seria      |-- serial at 49020000
 i2c        [   ]   i2c_omap        |-- i2c at 48070000
 i2c        [   ]   i2c_omap        |-- i2c at 48072000
 i2c        [   ]   i2c_omap        |-- i2c at 48060000
 mmc        [ + ]   omap_hsmmc      `-- mmc at 4809c000
 blk        [   ]   mmc_blk             `-- mmc at 4809c000.blk

In addition to this patch, I also applied these OMAP3 related patches:

https://patchwork.ozlabs.org/project/uboot/list/?submitter=67132

A WIP branch is here:

https://github.com/woodsts/u-boot/commits/omap3-adam-queue

Quoted 266 lines

---
Based on the conclusion on the thread[1], added a separate driver for omap uart.

[1] https://patchwork.ozlabs.org/patch/944756/

Changes since v2:
- Dropped enabling OMAP_SERIAL by default for SOC_DA8XX.

 drivers/serial/Kconfig       |   9 +++
 drivers/serial/Makefile      |   1 +
 drivers/serial/ns16550.c     |  47 +------------
 drivers/serial/serial_omap.c | 126 +++++++++++++++++++++++++++++++++++
 4 files changed, 139 insertions(+), 44 deletions(-)
 create mode 100644 drivers/serial/serial_omap.c
drivers/serial/Kconfig +9 -0
index 766e5ced03..41f43af01f 100644
@@ -625,6 +625,15 @@ config MSM_SERIAL
 	  for example APQ8016 and MSM8916.
 	  Single baudrate is supported in current implementation (115200).
 
+config OMAP_SERIAL
+	bool "Support for OMAP specific UART"
+	depends on DM_SERIAL
+	default y if ARCH_OMAP2PLUS
+	select SYS_NS16550
+	help
+	  If you have an TI based SoC and want to use the on-chip serial
+	  port, say Y to this option. If unsure say N.
+
 config OWL_SERIAL
 	bool "Actions Semi OWL UART"
 	depends on DM_SERIAL && ARCH_OWL
drivers/serial/Makefile +1 -0
index 9fa81d855d..03dc29ee2e 100644
@@ -65,6 +65,7 @@ obj-$(CONFIG_MVEBU_A3700_UART) += serial_mvebu_a3700.o
 obj-$(CONFIG_MPC8XX_CONS) += serial_mpc8xx.o
 obj-$(CONFIG_NULLDEV_SERIAL) += serial_nulldev.o
 obj-$(CONFIG_OWL_SERIAL) += serial_owl.o
+obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o
 
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_USB_TTY) += usbtty.o
drivers/serial/ns16550.c +3 -44
index 9c80090aa7..f9041aa626 100644
@@ -175,7 +175,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 		;
 
 	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if defined(CONFIG_ARCH_OMAP2PLUS)
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_OMAP_SERIAL)
 	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
 #endif
 
@@ -183,7 +183,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
 	serial_out(ns16550_getfcr(com_port), &com_port->fcr);
 	if (baud_divisor != -1)
 		NS16550_setbrg(com_port, baud_divisor);
-#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX)
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \
+	defined(CONFIG_OMAP_SERIAL)
 	/* /16 is proper to hit 115200 with 48MHz */
 	serial_out(0, &com_port->mdr1);
 #endif
@@ -279,42 +280,6 @@ DEBUG_UART_FUNCS
 
 #endif
 
-#ifdef CONFIG_DEBUG_UART_OMAP
-
-#include <debug_uart.h>
-
-static inline void _debug_uart_init(void)
-{
-	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
-	int baud_divisor;
-
-	baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
-					    CONFIG_BAUDRATE);
-	serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
-	serial_dout(&com_port->mdr1, 0x7);
-	serial_dout(&com_port->mcr, UART_MCRVAL);
-	serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
-
-	serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
-	serial_dout(&com_port->dll, baud_divisor & 0xff);
-	serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
-	serial_dout(&com_port->lcr, UART_LCRVAL);
-	serial_dout(&com_port->mdr1, 0x0);
-}
-
-static inline void _debug_uart_putc(int ch)
-{
-	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
-
-	while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
-		;
-	serial_dout(&com_port->thr, ch);
-}
-
-DEBUG_UART_FUNCS
-
-#endif
-
 #ifdef CONFIG_DM_SERIAL
 static int ns16550_serial_putc(struct udevice *dev, const char ch)
 {
@@ -489,12 +454,6 @@ static const struct udevice_id ns16550_serial_ids[] = {
 	{ .compatible = "ingenic,jz4780-uart",	.data = PORT_JZ4780  },
 	{ .compatible = "nvidia,tegra20-uart",	.data = PORT_NS16550 },
 	{ .compatible = "snps,dw-apb-uart",	.data = PORT_NS16550 },
-	{ .compatible = "ti,omap2-uart",	.data = PORT_NS16550 },
-	{ .compatible = "ti,omap3-uart",	.data = PORT_NS16550 },
-	{ .compatible = "ti,omap4-uart",	.data = PORT_NS16550 },
-	{ .compatible = "ti,am3352-uart",	.data = PORT_NS16550 },
-	{ .compatible = "ti,am4372-uart",	.data = PORT_NS16550 },
-	{ .compatible = "ti,dra742-uart",	.data = PORT_NS16550 },
 	{}
 };
 #endif /* OF_CONTROL && !OF_PLATDATA */
drivers/serial/serial_omap.c new file +126 -0
new file mode 100644
index 0000000000..d8a047bb71
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Texas Instruments' OMAP serial driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <[email protected]>
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <ns16550.h>
+#include <serial.h>
+#include <clk.h>
+
+#ifndef CONFIG_SYS_NS16550_CLK
+#define CONFIG_SYS_NS16550_CLK  0
+#endif
+
+#ifdef CONFIG_DEBUG_UART_OMAP
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+	int baud_divisor;
+
+	baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
+					    CONFIG_BAUDRATE);
+	serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
+	serial_dout(&com_port->mdr1, 0x7);
+	serial_dout(&com_port->mcr, UART_MCRVAL);
+	serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
+
+	serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
+	serial_dout(&com_port->dll, baud_divisor & 0xff);
+	serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
+	serial_dout(&com_port->lcr, UART_LCRVAL);
+	serial_dout(&com_port->mdr1, 0x0);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+	struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+
+	while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
+		;
+	serial_dout(&com_port->thr, ch);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
+
+#if CONFIG_IS_ENABLED(DM_SERIAL)
+
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int omap_serial_ofdata_to_platdata(struct udevice *dev)
+{
+	struct ns16550_platdata *plat = dev->platdata;
+	fdt_addr_t addr;
+	struct clk clk;
+	int err;
+
+	/* try Processor Local Bus device first */
+	addr = dev_read_addr(dev);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
+
+	plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
+	plat->reg_shift = 2;
+
+	err = clk_get_by_index(dev, 0, &clk);
+	if (!err) {
+		err = clk_get_rate(&clk);
+		if (!IS_ERR_VALUE(err))
+			plat->clock = err;
+	} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
+		debug("omap serial failed to get clock\n");
+		return err;
+	}
+
+	if (!plat->clock)
+		plat->clock = dev_read_u32_default(dev, "clock-frequency",
+						   CONFIG_SYS_NS16550_CLK);
+	if (!plat->clock) {
+		debug("omap serial clock not defined\n");
+		return -EINVAL;
+	}
+
+	plat->fcr = UART_FCR_DEFVAL;
+
+	return 0;
+}
+
+static const struct udevice_id omap_serial_ids[] = {
+	{ .compatible = "ti,omap2-uart", },
+	{ .compatible = "ti,omap3-uart", },
+	{ .compatible = "ti,omap4-uart", },
+	{ .compatible = "ti,am3352-uart", },
+	{ .compatible = "ti,am4372-uart", },
+	{ .compatible = "ti,dra742-uart", },
+	{}
+};
+#endif /* OF_CONTROL && !OF_PLATDATA */
+
+#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
+U_BOOT_DRIVER(omap_serial) = {
+	.name	= "omap_serial",
+	.id	= UCLASS_SERIAL,
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+	.of_match = omap_serial_ids,
+	.ofdata_to_platdata = omap_serial_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+#endif
+	.priv_auto_alloc_size = sizeof(struct NS16550),
+	.probe = ns16550_serial_probe,
+	.ops	= &ns16550_serial_ops,
+	.flags	= DM_FLAG_PRE_RELOC,
+};
+#endif
+#endif /* DM_SERIAL */
Signature · 6 lines
2.18.0

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
#3 lore raw

PATCH v3 1/1 serial: omap: Introduce DM specific omap serial

In reply to Lokesh Vutla
Quoted 6 lines · Lokesh Vutla

Add driver model support for OMAP_SERIAL while reusing the functions in ns16550.c

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180911/5abbedb0/attachment.sig>