dt-bindings: fix document typo
Subsystems (2)
PATCH 2/2 dt-bindings: fix document typo
Fix Documentation typo : (SMbus -> SMBus)
Signed-off-by manseop sim <[email protected]>
--- Documentation/devicetree/bindings/i2c/i2c.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/i2c/i2c.txt +1 -1
@@ -84,7 +84,7 @@ Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first interrupt if not using interrupt names) as primary interrupt for the slave. -Alternatively, devices supporting SMbus Host Notify, and connected to +Alternatively, devices supporting SMBus Host Notify, and connected to adapters that support this feature, may use "host-notify" property. I2C core will create a virtual interrupt for Host Notify and assign it as primary interrupt for the slave.
Signature · 1 line
2.17.1
Rob Herring
maintainerQuoted 1 line · sim manseop
Please write a better subject. As-is, it could apply to any binding file.
Quoted 23 lines
Fix Documentation typo : (SMbus -> SMBus)
Signed-off-by manseop sim <[email protected]>--- Documentation/devicetree/bindings/i2c/i2c.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Documentation/devicetree/bindings/i2c/i2c.txt +1
-2@@ -84,7 +84,7 @@ Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first interrupt if not using interrupt names) as primary interrupt for the slave. -Alternatively, devices supporting SMbus Host Notify, and connected to +Alternatively, devices supporting SMBus Host Notify, and connected to adapters that support this feature, may use "host-notify" property. I2C core will create a virtual interrupt for Host Notify and assign it as primary interrupt for the slave. --2.17.1