board/freescale/imx8mqevk: remove hardware support section from readme
PATCH 1/1 board/freescale/imx8mqevk: remove hardware support section from readme
At first the support for i.MX8MQ processors was minimal, hence this section in the readme file.
Since then, GPU support was added [1] in master and VPU in next [2].
So drop this section as it is confusing people and no one maintains it.
[1] https://git.buildroot.net/buildroot/commit/?id=84afda9c
[2] https://git.buildroot.net/buildroot/commit/?id=82732071
---
Hi,
Someone sent me a question about GPU support for i.MX8MQ, pointing out that the EVK readme clearly says it isn't supported :(
Can this patch be included for 2018.08 release?
Also, would it be possible to update the release text [1] to mention i.MX8MQ graphics support? Something like:
- i.MX Vivante graphics version bumped to 6.2.4.p1.2 adding support for Wayland and i.MX8MQ platforms
Regards,
Gary
[1] http://lists.busybox.net/pipermail/buildroot/2018-August/227070.html
--- board/freescale/imx8mqevk/readme.txt | 6 ------ 1 file changed, 6 deletions(-)
board/freescale/imx8mqevk/readme.txt +0 -6
@@ -5,12 +5,6 @@ Freescale i.MX8MQ EVK board This file documents the Buildroot support for the Freescale i.MX8MQ EVK board. -Hardware support -================ - -Currently only basic support for hardware is available, currently no -support for GPU, VPU and other HW features. - Build =====
Signature · 1 line
2.18.0
Thomas Petazzoni
AppliedPATCH 1/1 board/freescale/imx8mqevk: remove hardware support section from readme
Hello,
Quoted 11 lines · Gary Bisson
At first the support for i.MX8MQ processors was minimal, hence this section in the readme file.
Since then, GPU support was added [1] in master and VPU in next [2].
So drop this section as it is confusing people and no one maintains it.
[1] https://git.buildroot.net/buildroot/commit/?id=84afda9c
[2] https://git.buildroot.net/buildroot/commit/?id=82732071Signed-off-by Gary Bisson <[email protected]>
I've applied to master, thanks.
Quoted 6 lines
Can this patch be included for 2018.08 release?
Also, would it be possible to update the release text [1] to mention i.MX8MQ graphics support? Something like:
- i.MX Vivante graphics version bumped to 6.2.4.p1.2 adding support for Wayland and i.MX8MQ platforms
Peter: what do you think about this? Do we change the 2018.08-rc1 release details after the fact ? Do we include this in the 2018.08 final announcement, even if it was already there in 2018.08-rc1 ?
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 1/1 board/freescale/imx8mqevk: remove hardware support section from readme
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Hi,
Quoted 8 lines
Quoted 4 lines
Also, would it be possible to update the release text [1] to mention i.MX8MQ graphics support? Something like:
- i.MX Vivante graphics version bumped to 6.2.4.p1.2 adding support for Wayland and i.MX8MQ platformsPeter: what do you think about this? Do we change the 2018.08-rc1 release details after the fact ? Do we include this in the 2018.08 final announcement, even if it was already there in 2018.08-rc1 ?
I've added a note to the CHANGES for 2018.08-rc1.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 board/freescale/imx8mqevk: remove hardware support section from readme
Hi Peter, Thomas,
Quoted 9 lines · Peter Korsgaard
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Hi,
Quoted 4 lines
Quoted 4 lines
Also, would it be possible to update the release text [1] to mention i.MX8MQ graphics support? Something like:
- i.MX Vivante graphics version bumped to 6.2.4.p1.2 adding support for Wayland and i.MX8MQ platforms
Quoted 5 lines
Quoted 3 lines
Peter: what do you think about this? Do we change the 2018.08-rc1 release details after the fact ? Do we include this in the 2018.08 final announcement, even if it was already there in 2018.08-rc1 ?
I've added a note to the CHANGES for 2018.08-rc1.
Thank you, that's perfect!
Regards,
Gary