Skip to contentSkip to conversation

x86/setup: Deal with "quiet" commandline op

PATCH New Hans de Goede 1 participant 4 messages Sep 4, 2018 x86

lore
Share & tools
lore
#0 lore raw

cover x86/setup: Deal with "quiet" commandline op

Hi All,

While booting 4.19-rc2 for the first time I noticed that it was printing a bunch of BIOS-e820 mem init messages on the console even though I have "quiet" on the commandline.

See the commit message of the patch for the cause of this. The patch is not really pretty (nor really ugly), but it is the best solution I could come up with.

Regards,

Hans

#1 lore raw

PATCH 1/1 x86/setup: Deal with "quiet" commandline option earlier

X86's setup_arch() calls parse_early_param() somewhat late, to make sure that everything is setup correcty to deal with earlyprintk over the EHCI debug port.

This means that a number of pr_info-s get done before "early_param("quiet", quiet_kernel)" from init/main.c gets processed.

Until commit 375899cddcbb ("printk: make sure to print log on console.") this was not a problem because the printk code would evaluate the console_loglevel vs the message-loglevel when flushing the buffer.

After this commit the check is done at the time that pr_info is actually called and the console_loglevel at calling time.

This causes the following messages to get printed with the "quiet" option:

[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
...
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000874ffffff] usable

This commit fixes this by making x86's setup_arch() explicitly check for quiet early on.

Cc Petr Mladek <[email protected]>
Cc Maninder Singh <[email protected]>
Fixes 375899cddcbb ("printk: make sure to print log on console.")
---
 arch/x86/kernel/setup.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
arch/x86/kernel/setup.c +11 -0
index b4866badb235..38f66b14cf3d 100644
@@ -93,6 +93,7 @@
 #include <asm/processor.h>
 #include <asm/bugs.h>
 #include <asm/kasan.h>
+#include <asm/cmdline.h>
 
 #include <asm/vsyscall.h>
 #include <asm/cpu.h>
@@ -864,6 +865,16 @@ void __init setup_arch(char **cmdline_p)
 	boot_cpu_data.x86_phys_bits = MAX_PHYSMEM_BITS;
 #endif
 
+#if !defined CONFIG_CMDLINE_BOOL || !defined CONFIG_CMDLINE_OVERRIDE
+	/*
+	 * We call parse_early_param() somewhat late, see x86_configure_nx()
+	 * comment. Deal with "quiet" here to suppress printing of early
+	 * boot messages when quiet has been requested.
+	 */
+	if (cmdline_find_option_bool(boot_command_line, "quiet"))
+		console_loglevel = CONSOLE_LOGLEVEL_QUIET;
+#endif
+
 	/*
 	 * If we have OLPC OFW, we might end up relocating the fixmap due to
 	 * reserve_top(), so do this before touching the ioremap area.
Signature · 1 line
2.19.0.rc0
#2 lore raw

Re: [PATCH] x86/setup: Deal with "quiet" commandline option earlier

Hi,

Quoted 21 lines · Hans de Goede

X86's setup_arch() calls parse_early_param() somewhat late, to make sure that everything is setup correcty to deal with earlyprintk over the EHCI debug port.

This means that a number of pr_info-s get done before "early_param("quiet", quiet_kernel)" from init/main.c gets processed.

Until commit 375899cddcbb ("printk: make sure to print log on console.") this was not a problem because the printk code would evaluate the console_loglevel vs the message-loglevel when flushing the buffer.

After this commit the check is done at the time that pr_info is actually called and the console_loglevel at calling time.

This causes the following messages to get printed with the "quiet" option:

[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
...
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000874ffffff] usable
Quoted 7 lines

This commit fixes this by making x86's setup_arch() explicitly check for quiet early on.

Cc Petr Mladek <[email protected]>
Cc Maninder Singh <[email protected]>
Fixes 375899cddcbb ("printk: make sure to print log on console.")

Self-nack, I accidentally still had the revert of commit 375899cddcbb ("printk: make sure to print log on console.") in my tree while testing…

In order for my approach to work, we need to deal with the quiet option even earlier, before the first pr_notice in init/main.c, which requires access to the commandline before setup_arch() which is the function which fills the boot_command_line on several architectures.

So I think we need to look at a different approach.

I have one more idea, if that does not work out I think we
just need to revert 375899cddcbb ("printk: make sure to print log on console.")

Regards,

Hans

Quoted 34 lines
---
  arch/x86/kernel/setup.c | 11 +++++++++++
  1 file changed, 11 insertions(+)
arch/x86/kernel/setup.c +11 -0
index b4866badb235..38f66b14cf3d 100644
@@ -93,6 +93,7 @@
  #include <asm/processor.h>
  #include <asm/bugs.h>
  #include <asm/kasan.h>
+#include <asm/cmdline.h>
 
  #include <asm/vsyscall.h>
  #include <asm/cpu.h>
@@ -864,6 +865,16 @@ void __init setup_arch(char **cmdline_p)
  	boot_cpu_data.x86_phys_bits = MAX_PHYSMEM_BITS;
  #endif
 
+#if !defined CONFIG_CMDLINE_BOOL || !defined CONFIG_CMDLINE_OVERRIDE
+	/*
+	 * We call parse_early_param() somewhat late, see x86_configure_nx()
+	 * comment. Deal with "quiet" here to suppress printing of early
+	 * boot messages when quiet has been requested.
+	 */
+	if (cmdline_find_option_bool(boot_command_line, "quiet"))
+		console_loglevel = CONSOLE_LOGLEVEL_QUIET;
+#endif
+
  	/*
  	 * If we have OLPC OFW, we might end up relocating the fixmap due to
  	 * reserve_top(), so do this before touching the ioremap area.
#3 lore raw

Re: [PATCH] x86/setup: Deal with "quiet" commandline option earlier

Hi,

Quoted 42 lines · Hans de Goede

Hi,

Quoted 21 lines · Hans de Goede

X86's setup_arch() calls parse_early_param() somewhat late, to make sure that everything is setup correcty to deal with earlyprintk over the EHCI debug port.

This means that a number of pr_info-s get done before "early_param("quiet", quiet_kernel)" from init/main.c gets processed.

Until commit 375899cddcbb ("printk: make sure to print log on console.") this was not a problem because the printk code would evaluate the console_loglevel vs the message-loglevel when flushing the buffer.

After this commit the check is done at the time that pr_info is actually called and the console_loglevel at calling time.

This causes the following messages to get printed with the "quiet" option:

[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
...
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000874ffffff] usable

Quoted 7 lines

This commit fixes this by making x86's setup_arch() explicitly check for quiet early on.

Cc Petr Mladek <[email protected]>
Cc Maninder Singh <[email protected]>
Fixes 375899cddcbb ("printk: make sure to print log on console.")

Self-nack, I accidentally still had the revert of commit 375899cddcbb ("printk: make sure to print log on console.") in my tree while testing…

In order for my approach to work, we need to deal with the quiet option even earlier, before the first pr_notice in init/main.c, which requires access to the commandline before setup_arch() which is the function which fills the boot_command_line on several architectures.

Quoted 4 lines

So I think we need to look at a different approach.

I have one more idea, if that does not work out I think we
just need to revert 375899cddcbb ("printk: make sure to print log on console.")

Ok, I have come up with a better, arch neutral fix, which no fully lives in printk.c. I will keep the To/Cc of the new patch the same to keep everyone in the loop.

Regards,

Hans

Quoted 32 lines
Quoted 32 lines

---
  arch/x86/kernel/setup.c | 11 +++++++++++

  1 file changed, 11 insertions(+)
arch/x86/kernel/setup.c +11 -0
index b4866badb235..38f66b14cf3d 100644
@@ -93,6 +93,7 @@
   #include <asm/processor.h>
   #include <asm/bugs.h>
   #include <asm/kasan.h>
+#include <asm/cmdline.h>
   #include <asm/vsyscall.h>
   #include <asm/cpu.h>
@@ -864,6 +865,16 @@ void __init setup_arch(char **cmdline_p)
       boot_cpu_data.x86_phys_bits = MAX_PHYSMEM_BITS;
   #endif
+#if !defined CONFIG_CMDLINE_BOOL || !defined CONFIG_CMDLINE_OVERRIDE
+    /*
+     * We call parse_early_param() somewhat late, see x86_configure_nx()
+     * comment. Deal with "quiet" here to suppress printing of early
+     * boot messages when quiet has been requested.
+     */
+    if (cmdline_find_option_bool(boot_command_line, "quiet"))
+        console_loglevel = CONSOLE_LOGLEVEL_QUIET;
+#endif
+
       /*
        * If we have OLPC OFW, we might end up relocating the fixmap due to
        * reserve_top(), so do this before touching the ioremap area.