Skip to contentSkip to conversation

EDAC, sb_edac: Fix reporting wrong DIMM when patrol scrubber finds error

PATCH New Luck, Tony 1 participant 1 message Sep 4, 2018

Subsystems (2)
lore
Share & tools
lore

Luck, Tony

author maintainer
#0 lore raw

PATCH 3/3 EDAC, sb_edac: Fix reporting wrong DIMM when patrol scrubber finds error

From: Qiuxu Zhuo <[email protected]>

EDAC driver sometimes reports the wrong DIMM for a memory error found by the patrol scrubber. It's rooted in h/w that only provides a 4KB page aligned address for the error case. This means that the EDAC driver will point at the DIMM matching offset 0x0 in the 4KB page, but because of interleaving across channels and ranks the actual DIMM involved may be different if the error is on some other cache line within the page.

For this error case, we could pass the socket/iMC/channel information from the "mce" structure passed the EDAC driver and "dimm=-1" to the EDAC core. So it will report all the DIMMs on that channel may be affected.

---
 drivers/edac/sb_edac.c | 95 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 89 insertions(+), 6 deletions(-)
drivers/edac/sb_edac.c +89 -6
index f3678cdada83..f6009c7d452b 100644
@@ -326,6 +326,7 @@ struct sbridge_info {
 	const struct interleave_pkg *interleave_pkg;
 	u8		max_sad;
 	u8		(*get_node_id)(struct sbridge_pvt *pvt);
+	u8		(*get_ha)(u8 bank);
 	enum mem_type	(*get_memory_type)(struct sbridge_pvt *pvt);
 	enum dev_type	(*get_width)(struct sbridge_pvt *pvt, u32 mtr);
 	struct pci_dev	*pci_vtd;
@@ -1002,6 +1003,22 @@ static u8 knl_get_node_id(struct sbridge_pvt *pvt)
 	return GET_BITFIELD(reg, 0, 2);
 }
 
+static u8 sbridge_get_ha(u8 bank)
+{
+	return 0;
+}
+
+static u8 ibridge_get_ha(u8 bank)
+{
+	switch (bank) {
+	case 7 ... 8:
+		return bank - 7;
+	case 9 ... 16:
+		return (bank - 9) / 4;
+	default:
+		return -EINVAL;
+	}
+}
 
 static u64 haswell_get_tolm(struct sbridge_pvt *pvt)
 {
@@ -2207,6 +2224,56 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
 	return 0;
 }
 
+static int get_memory_error_data_from_mce(struct mem_ctl_info *mci,
+					  const struct mce *m, u8 *socket,
+					  u8 *ha, long *channel_mask,
+					  char *msg)
+{
+	u32 reg, channel = GET_BITFIELD(m->status, 0, 3);
+	struct mem_ctl_info *new_mci;
+	struct sbridge_pvt *pvt;
+	struct pci_dev *pci_ha;
+	bool tad0;
+
+	if (channel >= NUM_CHANNELS) {
+		sprintf(msg, "Invalid channel 0x%x", channel);
+		return -EINVAL;
+	}
+
+	pvt = mci->pvt_info;
+	*ha = pvt->info.get_ha(m->bank);
+	if (*ha != 0 && *ha != 1) {
+		sprintf(msg, "Invalid ha 0x%x", *ha);
+		return -EINVAL;
+	}
+
+	*socket = m->socketid;
+	new_mci = get_mci_for_node_id(*socket, *ha);
+	if (!new_mci) {
+		strcpy(msg, "mci socket got corrupted!");
+		return -EINVAL;
+	}
+
+	pvt = new_mci->pvt_info;
+	pci_ha = pvt->pci_ha;
+	pci_read_config_dword(pci_ha, tad_dram_rule[0], &reg);
+	tad0 = m->addr <= TAD_LIMIT(reg);
+
+	*channel_mask = 1 << channel;
+	if (pvt->mirror_mode == FULL_MIRRORING ||
+	    (pvt->mirror_mode == ADDR_RANGE_MIRRORING && tad0)) {
+		*channel_mask |= 1 << ((channel + 2) % 4);
+		pvt->is_cur_addr_mirrored = true;
+	} else {
+		pvt->is_cur_addr_mirrored = false;
+	}
+
+	if (pvt->is_lockstep)
+		*channel_mask |= 1 << ((channel + 1) % 4);
+
+	return 0;
+}
+
 /****************************************************************************
 	Device initialization routines: put/get, init/exit
  ****************************************************************************/
@@ -2877,10 +2944,16 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
 	u32 errcode = GET_BITFIELD(m->status, 0, 15);
 	u32 channel = GET_BITFIELD(m->status, 0, 3);
 	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+	/*
+	 * Bits 5-0 of MCi_MISC give the least significant bit that is valid.
+	 * A value 6 is for cache line aligned address, a value 12 is for page
+	 * aligned address reported by patrol scrubber.
+	 */
+	u32 lsb = GET_BITFIELD(m->misc, 0, 5);
 	long channel_mask, first_channel;
-	u8  rank, socket, ha;
+	u8  rank = 0xff, socket, ha;
 	int rc, dimm;
-	char *area_type = NULL;
+	char *area_type = "DRAM";
 
 	if (pvt->info.type != SANDY_BRIDGE)
 		recoverable = true;
@@ -2964,9 +3037,13 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
 				optype, msg);
 		}
 		return;
-	} else {
+	} else if (lsb < 12) {
 		rc = get_memory_error_data(mci, m->addr, &socket, &ha,
-				&channel_mask, &rank, &area_type, msg);
+					   &channel_mask, &rank,
+					   &area_type, msg);
+	} else {
+		rc = get_memory_error_data_from_mce(mci, m, &socket, &ha,
+						    &channel_mask, msg);
 	}
 
 	if (rc < 0)
@@ -2981,14 +3058,15 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
 
 	first_channel = find_first_bit(&channel_mask, NUM_CHANNELS);
 
-	if (rank < 4)
+	if (rank == 0xff)
+		dimm = -1;
+	else if (rank < 4)
 		dimm = 0;
 	else if (rank < 8)
 		dimm = 1;
 	else
 		dimm = 2;
 
-
 	/*
 	 * FIXME: On some memory configurations (mirror, lockstep), the
 	 * Memory Controller can't point the error to a single DIMM. The
@@ -3175,6 +3253,7 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 		pvt->info.dram_rule = ibridge_dram_rule;
 		pvt->info.get_memory_type = get_memory_type;
 		pvt->info.get_node_id = get_node_id;
+		pvt->info.get_ha = ibridge_get_ha;
 		pvt->info.rir_limit = rir_limit;
 		pvt->info.sad_limit = sad_limit;
 		pvt->info.interleave_mode = interleave_mode;
@@ -3199,6 +3278,7 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 		pvt->info.dram_rule = sbridge_dram_rule;
 		pvt->info.get_memory_type = get_memory_type;
 		pvt->info.get_node_id = get_node_id;
+		pvt->info.get_ha = sbridge_get_ha;
 		pvt->info.rir_limit = rir_limit;
 		pvt->info.sad_limit = sad_limit;
 		pvt->info.interleave_mode = interleave_mode;
@@ -3223,6 +3303,7 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 		pvt->info.dram_rule = ibridge_dram_rule;
 		pvt->info.get_memory_type = haswell_get_memory_type;
 		pvt->info.get_node_id = haswell_get_node_id;
+		pvt->info.get_ha = ibridge_get_ha;
 		pvt->info.rir_limit = haswell_rir_limit;
 		pvt->info.sad_limit = sad_limit;
 		pvt->info.interleave_mode = interleave_mode;
@@ -3247,6 +3328,7 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 		pvt->info.dram_rule = ibridge_dram_rule;
 		pvt->info.get_memory_type = haswell_get_memory_type;
 		pvt->info.get_node_id = haswell_get_node_id;
+		pvt->info.get_ha = ibridge_get_ha;
 		pvt->info.rir_limit = haswell_rir_limit;
 		pvt->info.sad_limit = sad_limit;
 		pvt->info.interleave_mode = interleave_mode;
@@ -3271,6 +3353,7 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 		pvt->info.dram_rule = knl_dram_rule;
 		pvt->info.get_memory_type = knl_get_memory_type;
 		pvt->info.get_node_id = knl_get_node_id;
+		pvt->info.get_ha = NULL;
 		pvt->info.rir_limit = NULL;
 		pvt->info.sad_limit = knl_sad_limit;
 		pvt->info.interleave_mode = knl_interleave_mode;