mmc: omap_hsmmc: Fix pbias for omap3_logic to enable CD pin
Subsystems (2)
PATCH 1/1 mmc: omap_hsmmc: Fix pbias for omap3_logic to enable CD pin
The MMC card detect pin is connected to gpio127 on omap3_logic. When setting up the pbias register for MMC, let's also enable gpio_127 for the card detect. As part of the package deal, gpio_126 and gpio_129 are also enabled.
Signed-off-by Adam Ford <[email protected]>
arch/arm/include/asm/arch-omap3/mmc_host_def.h +1 -0
@@ -51,6 +51,7 @@ typedef struct t2 {#define PBIASLITEPWRDNZ0 (1 << 1)#define PBIASSPEEDCTRL0 (1 << 2)#define PBIASLITEPWRDNZ1 (1 << 9) +#define PBIASLITEVMODE1 (1 << 8)#define PBIASLITEVMODE0 (1 << 0)#define CTLPROGIO1SPEEDCTRL (1 << 20)
drivers/mmc/omap_hsmmc.c +4 -0
@@ -216,6 +216,10 @@ static unsigned char mmc_board_init(struct mmc *mmc)/* for cairo board, we need to set up 1.8 Volt bias level on MMC1 */ pbias_lite &= ~PBIASLITEVMODE0 ;#endif +#ifdef CONFIG_TARGET_OMAP3_LOGIC +/* For Logic PD board, 1.8V bias to go enable gpio127 for mmc_cd */ + pbias_lite &= ~PBIASLITEVMODE1 ; +#endif #ifdef CONFIG_MMC_OMAP36XX_PINS if (get_cpu_family () ==CPU_OMAP36XX ) {/* Disable extended drain IO before changing PBIAS */
Signature · 1 line
2.17.1
arch/arm/include/asm/arch-omap3/mmc_host_def.h
Quoted 9 lines · Adam Ford
The MMC card detect pin is connected to gpio127 on
omap3_logic. When setting up the pbias register for MMC, let's also enablegpio_127for the card detect. As part of the package deal,gpio_126andgpio_129are also enabled.Signed-off-by Adam Ford <[email protected]>arch/arm/include/asm/arch-omap3/mmc_host_def.h +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180926/8396c41f/attachment.sig>