ARM: opos6ul: make the board boot again
Subsystems (2)
PATCH v3 1/1 ARM: opos6ul: make the board boot again
Commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") removes the u-boot,dm-spl properties from the imx6ul.dtsi file and breaks the OPOS6UL board.
Add the u-boot,dm-spl properties into *-u-boot.dts files to make the board boot again.
---
Changes for v3:
- use the automatic inclusion of -u-boot.dtsi mechanism of U-Boot.
Changes for v2:
- put u-boot,dm-spl properties into -u-boot.dts files
arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++++++++++++++++++++++++++++ arch/arm/dts/imx6ul-opos6ul.dtsi | 2 -- arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi | 24 ++++++++++++++++++++++++ arch/arm/dts/imx6ul-opos6uldev.dts | 2 -- 4 files changed, 52 insertions(+), 4 deletions(-) create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi new file +28 -0
@@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the OPOS6UL SoM + * + * Copyright (C) 2018 Armadeus Systems <[email protected]> + */ + +/ { + soc { + u-boot,dm-spl; + }; +}; + +&aips2 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +};
arch/arm/dts/imx6ul-opos6ul.dtsi +0 -2
@@ -99,7 +99,6 @@ /* eMMC */ &usdhc1 { - u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>;
@@ -162,7 +161,6 @@ }; pinctrl_usdhc1: usdhc1grp { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi new file +24 -0
@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the OPOS6ULDev board + * + * Copyright (C) 2018 Armadeus Systems <[email protected]> + */ + +#include "imx6ul-opos6ul-u-boot.dtsi" + +&aips1 { + u-boot,dm-spl; + + spba-bus at 02000000 { + u-boot,dm-spl; + }; +}; + +&pinctrl_uart1 { + u-boot,dm-spl; +}; + +&uart1 { + u-boot,dm-spl; +};
arch/arm/dts/imx6ul-opos6uldev.dts +0 -2
@@ -228,7 +228,6 @@ }; &uart1 { - u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay";
@@ -374,7 +373,6 @@ }; pinctrl_uart1: uart1grp { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
Signature · 1 line
2.16.4
PATCH v3 1/1 ARM: opos6ul: make the board boot again
Quoted 8 lines · Sébastien Szymanski
Commit
9faa43c4b5e5("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") removes the u-boot,dm-spl properties from theimx6ul.dtsifile and breaks the OPOS6UL board.
Add the u-boot,dm-spl properties into *-u-boot.dts files to make the board boot again.Fixes commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl")Signed-off-by Sébastien Szymanski <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180906/f2a32af4/attachment.sig>
PATCH v3 1/1 ARM: opos6ul: make the board boot again
In reply to Sébastien SzymanskiQuoted 122 lines · Sébastien Szymanski
Commit
9faa43c4b5e5("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") removes the u-boot,dm-spl properties from theimx6ul.dtsifile and breaks the OPOS6UL board.
Add the u-boot,dm-spl properties into *-u-boot.dts files to make the board boot again.Fixes commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl")Signed-off-by Sébastien Szymanski <[email protected]>---
Changes for v3:
- use the automatic inclusion of-u-boot.dtsimechanism of U-Boot.Changes for v2:
- put u-boot,dm-spl properties into-u-boot.dtsfilesarch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++++++++++++++++++++++++++++ arch/arm/dts/imx6ul-opos6ul.dtsi | 2 -- arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi | 24 ++++++++++++++++++++++++ arch/arm/dts/imx6ul-opos6uldev.dts | 2 -- 4 files changed, 52 insertions(+), 4 deletions(-) create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsiarch/arm/dts/imx6ul-opos6ul-u-boot.dtsi new file +28
-0@@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the OPOS6UL SoM + * + * Copyright (C) 2018 Armadeus Systems <[email protected]> + */ + +/ { + soc { + u-boot,dm-spl; + }; +}; + +&aips2 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pinctrl_usdhc1 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +};arch/arm/dts/imx6ul-opos6ul.dtsi +0
-2@@ -99,7 +99,6 @@ /* eMMC */ &usdhc1 { - u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>;@@ -162,7 +161,6 @@ }; pinctrl_usdhc1: usdhc1grp { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi new file +24
-0@@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source extras for U-Boot for the OPOS6ULDev board + * + * Copyright (C) 2018 Armadeus Systems <[email protected]> + */ + +#include "imx6ul-opos6ul-u-boot.dtsi" + +&aips1 { + u-boot,dm-spl; + + spba-bus at 02000000 { + u-boot,dm-spl; + }; +}; + +&pinctrl_uart1 { + u-boot,dm-spl; +}; + +&uart1 { + u-boot,dm-spl; +};arch/arm/dts/imx6ul-opos6uldev.dts +0
-1@@ -228,7 +228,6 @@ }; &uart1 { - u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay";
arch/arm/dts/imx6ul-opos6uldev.dts line 378
Quoted 7 lines
arch/arm/dts/imx6ul-opos6uldev.dts +0
-1@@ -374,7 +373,6 @@ }; pinctrl_uart1: uart1grp { - u-boot,dm-spl; fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 1/1 ARM: opos6ul: make the board boot again
Hello,
Quoted 25 lines · Stefano Babic
Quoted 24 lines · Sébastien Szymanski
Commit
9faa43c4b5e5("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl") removes the u-boot,dm-spl properties from theimx6ul.dtsifile and breaks the OPOS6UL board.
Add the u-boot,dm-spl properties into *-u-boot.dts files to make the board boot again.Fixes commit 9faa43c4b5e5 ("ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl")Signed-off-by Sébastien Szymanski <[email protected]>---
Changes for v3:
- use the automatic inclusion of-u-boot.dtsimechanism of U-Boot.Changes for v2:
- put u-boot,dm-spl properties into-u-boot.dtsfilesarch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++++++++++++++++++++++++++++ arch/arm/dts/imx6ul-opos6ul.dtsi | 2 -- arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi | 24 ++++++++++++++++++++++++ arch/arm/dts/imx6ul-opos6uldev.dts | 2 -- 4 files changed, 52 insertions(+), 4 deletions(-) create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dtsi
[...]
Quoted 2 lines
Reviewed-by Stefano Babic <[email protected]>
Is there still something preventing this patch to be applied ?
Best regards,
Quoted 4 lines
Best regards,
Stefano Babic
Signature · 4 lines
Sébastien Szymanski Software engineer, Armadeus Systems Tel: +33 (0)9 72 29 41 44 Fax: +33 (0)9 72 28 79 26