Skip to contentSkip to conversation

iio: adxl372: Add support for I2C communication

PATCH Applied Stefan Popa 2 participants 2 messages Sep 4, 2018 – Sep 8, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 2/3 iio: adxl372: Add support for I2C communication

The adxl372 is designed to communicate in either SPI or I2C protocol. It autodetects the format being used, requiring no configuration control to select the format.

---
 MAINTAINERS                     |  1 +
 drivers/iio/accel/Kconfig       | 11 ++++++++
 drivers/iio/accel/Makefile      |  1 +
 drivers/iio/accel/adxl372.c     |  1 -
 drivers/iio/accel/adxl372.h     |  2 ++
 drivers/iio/accel/adxl372_i2c.c | 61 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 76 insertions(+), 1 deletion(-)
 create mode 100644 drivers/iio/accel/adxl372_i2c.c
MAINTAINERS +1 -0
index 2938632..2b9a364 100644
@@ -549,6 +549,7 @@ W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/iio/accel/adxl372.c
 F:	drivers/iio/accel/adxl372_spi.c
+F:	drivers/iio/accel/adxl372_i2c.c
 F:	Documentation/devicetree/bindings/iio/accel/adxl372.txt
 
 AF9013 MEDIA DRIVER
drivers/iio/accel/Kconfig +11 -0
index bed5da8..7993a67 100644
@@ -76,6 +76,17 @@ config ADXL372_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called adxl372_spi.
 
+config ADXL372_I2C
+	tristate "Analog Devices ADXL372 3-Axis Accelerometer I2C Driver"
+	depends on I2C
+	select ADXL372
+	select REGMAP_I2C
+	help
+	  Say yes here to add support for the Analog Devices ADXL372 triaxial
+	  acceleration sensor.
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl372_i2c.
+
 config BMA180
 	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
 	depends on I2C
drivers/iio/accel/Makefile +1 -0
index c9c5db9..56bd021 100644
@@ -10,6 +10,7 @@ obj-$(CONFIG_ADXL345) += adxl345_core.o
 obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
 obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
 obj-$(CONFIG_ADXL372) += adxl372.o
+obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
 obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
drivers/iio/accel/adxl372.c +0 -1
index f1df89d..3b84cb2 100644
@@ -26,7 +26,6 @@
 #define ADXL372_DEVID			0x00
 #define ADXL372_DEVID_MST		0x01
 #define ADXL372_PARTID			0x02
-#define ADXL372_REVID			0x03
 #define ADXL372_STATUS_1		0x04
 #define ADXL372_STATUS_2		0x05
 #define ADXL372_FIFO_ENTRIES_2		0x06
drivers/iio/accel/adxl372.h +2 -0
index 5da89b1..80a0aa9 100644
@@ -8,6 +8,8 @@
 #ifndef _ADXL372_H_
 #define _ADXL372_H_
 
+#define ADXL372_REVID	0x03
+
 int adxl372_probe(struct device *dev, struct regmap *regmap,
 		  int irq, const char *name);
 bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg);
drivers/iio/accel/adxl372_i2c.c new file +61 -0

61 lines not on this page · raw message

Signature · 1 line
2.7.4
maintainer Applied
#1 lore raw
Quoted 5 lines · On Tue, 4 Sep 2018 17:12:32 +0300 Stefan Popa <[email protected]> wrote:

The adxl372 is designed to communicate in either SPI or I2C protocol. It autodetects the format being used, requiring no configuration control to select the format.

Applied.

Thanks,

Jonathan

Quoted 148 lines
---
 MAINTAINERS                     |  1 +
 drivers/iio/accel/Kconfig       | 11 ++++++++
 drivers/iio/accel/Makefile      |  1 +
 drivers/iio/accel/adxl372.c     |  1 -
 drivers/iio/accel/adxl372.h     |  2 ++
 drivers/iio/accel/adxl372_i2c.c | 61 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 76 insertions(+), 1 deletion(-)
 create mode 100644 drivers/iio/accel/adxl372_i2c.c
MAINTAINERS +1 -0
index 2938632..2b9a364 100644
@@ -549,6 +549,7 @@ W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/iio/accel/adxl372.c
 F:	drivers/iio/accel/adxl372_spi.c
+F:	drivers/iio/accel/adxl372_i2c.c
 F:	Documentation/devicetree/bindings/iio/accel/adxl372.txt
 
 AF9013 MEDIA DRIVER
drivers/iio/accel/Kconfig +11 -0
index bed5da8..7993a67 100644
@@ -76,6 +76,17 @@ config ADXL372_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called adxl372_spi.
 
+config ADXL372_I2C
+	tristate "Analog Devices ADXL372 3-Axis Accelerometer I2C Driver"
+	depends on I2C
+	select ADXL372
+	select REGMAP_I2C
+	help
+	  Say yes here to add support for the Analog Devices ADXL372 triaxial
+	  acceleration sensor.
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl372_i2c.
+
 config BMA180
 	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
 	depends on I2C
drivers/iio/accel/Makefile +1 -0
index c9c5db9..56bd021 100644
@@ -10,6 +10,7 @@ obj-$(CONFIG_ADXL345) += adxl345_core.o
 obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
 obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
 obj-$(CONFIG_ADXL372) += adxl372.o
+obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
 obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
drivers/iio/accel/adxl372.c +0 -1
index f1df89d..3b84cb2 100644
@@ -26,7 +26,6 @@
 #define ADXL372_DEVID			0x00
 #define ADXL372_DEVID_MST		0x01
 #define ADXL372_PARTID			0x02
-#define ADXL372_REVID			0x03
 #define ADXL372_STATUS_1		0x04
 #define ADXL372_STATUS_2		0x05
 #define ADXL372_FIFO_ENTRIES_2		0x06
drivers/iio/accel/adxl372.h +2 -0
index 5da89b1..80a0aa9 100644
@@ -8,6 +8,8 @@
 #ifndef _ADXL372_H_
 #define _ADXL372_H_
 
+#define ADXL372_REVID	0x03
+
 int adxl372_probe(struct device *dev, struct regmap *regmap,
 		  int irq, const char *name);
 bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg);
drivers/iio/accel/adxl372_i2c.c new file +61 -0
new file mode 100644
index 0000000..e1affe4
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADXL372 3-Axis Digital Accelerometer I2C driver
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "adxl372.h"
+
+static const struct regmap_config adxl372_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.readable_noinc_reg = adxl372_readable_noinc_reg,
+};
+
+static int adxl372_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	unsigned int regval;
+	int ret;
+
+	regmap = devm_regmap_init_i2c(client, &adxl372_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = regmap_read(regmap, ADXL372_REVID, &regval);
+	if (ret < 0)
+		return ret;
+
+	/* Starting with the 3rd revision an I2C chip bug was fixed */
+	if (regval < 3)
+		dev_warn(&client->dev,
+		"I2C might not work properly with other devices on the bus");
+
+	return adxl372_probe(&client->dev, regmap, client->irq, id->name);
+}
+
+static const struct i2c_device_id adxl372_i2c_id[] = {
+	{ "adxl372", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, adxl372_i2c_id);
+
+static struct i2c_driver adxl372_i2c_driver = {
+	.driver = {
+		.name = "adxl372_i2c",
+	},
+	.probe = adxl372_i2c_probe,
+	.id_table = adxl372_i2c_id,
+};
+
+module_i2c_driver(adxl372_i2c_driver);
+
+MODULE_AUTHOR("Stefan Popa <[email protected]>");
+MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer I2C driver");
+MODULE_LICENSE("GPL");