Skip to contentSkip to conversation

tty: hvc: latency break regression fixes

PATCH In review Nicholas Piggin 2 participants 5 messages Sep 9, 2018 – Sep 10, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover tty: hvc: latency break regression fixes

Re-sending this one with the used-uinitialized warning in patch 3 fixed.

Greg these patches are needed to fix regressions in this merge window, please consider them for your tty tree.

Thanks,
Nick

Nicholas Piggin (3):
tty: hvc: hvc_poll() fix read loop hang
tty: hvc: hvc_poll() fix read loop batching
tty: hvc: hvc_write() fix break condition

 drivers/tty/hvc/hvc_console.c | 38 ++++++++++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 5 deletions(-)
Signature · 1 line
2.18.0
#1 lore raw

PATCH v2 1/3 tty: hvc: hvc_poll() fix read loop hang

Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") causes the virtio console to hang at times (e.g., if you paste a bunch of characters to it.

The reason is that get_chars must return 0 before we can be sure the driver will kick or poll input again, but this change only scheduled a poll if get_chars had returned a full count. Change this to poll on any > 0 count.

---
 drivers/tty/hvc/hvc_console.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/tty/hvc/hvc_console.c +5 -2
index 5414c4a87bea..c917749708d2 100644
@@ -717,10 +717,13 @@ static int __hvc_poll(struct hvc_struct *hp, bool may_sleep)
 #endif /* CONFIG_MAGIC_SYSRQ */
 		tty_insert_flip_char(&hp->port, buf[i], 0);
 	}
-	if (n == count)
-		poll_mask |= HVC_POLL_READ;
 	read_total = n;
 
+	/*
+	 * Latency break, schedule another poll immediately.
+	 */
+	poll_mask |= HVC_POLL_READ;
+
  out:
 	/* Wakeup write queue if necessary */
 	if (hp->do_wakeup) {
Signature · 1 line
2.18.0
#2 lore raw

PATCH v2 2/3 tty: hvc: hvc_poll() fix read loop batching

In reply to Nicholas Piggin

Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") removes get_chars batching entirely, which slows down large console operations like paste -- virtio console "feels worse than a 9600 baud serial line," reports Matteo.

This adds back batching in a more latency friendly way. If the caller can sleep then we try to fill the entire flip buffer, releasing the lock and scheduling between each iteration. If it can not sleep, then batches are limited to 128 bytes. Matteo confirms this fixes the performance problem.

Latency testing the powerpc OPAL console with OpenBMC UART with a large paste shows about 0.25ms latency, which seems reasonable. 10ms latencies were typical for this case before the latency breaking work, so we still see most of the benefit.

  kopald-1204    0d.h.    5us : hvc_poll <-hvc_handle_interrupt
  kopald-1204    0d.h.    5us : __hvc_poll <-hvc_handle_interrupt
  kopald-1204    0d.h.    5us : _raw_spin_lock_irqsave <-__hvc_poll
  kopald-1204    0d.h.    5us : tty_port_tty_get <-__hvc_poll
  kopald-1204    0d.h.    6us : _raw_spin_lock_irqsave <-tty_port_tty_get
  kopald-1204    0d.h.    6us : _raw_spin_unlock_irqrestore <-tty_port_tty_get
  kopald-1204    0d.h.    6us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.    7us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.    7us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.   36us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.   36us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.   36us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.   65us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.   65us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.   66us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.   94us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.   95us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.   95us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.  124us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  124us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  125us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.  154us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  154us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  154us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.  183us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  184us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  184us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.  213us : tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  213us : __tty_buffer_request_room <-__hvc_poll
  kopald-1204    0d.h.  213us+: opal_get_chars <-__hvc_poll
  kopald-1204    0d.h.  242us : _raw_spin_unlock_irqrestore <-__hvc_poll
  kopald-1204    0d.h.  242us : tty_flip_buffer_push <-__hvc_poll
  kopald-1204    0d.h.  243us : queue_work_on <-tty_flip_buffer_push
  kopald-1204    0d.h.  243us : tty_kref_put <-__hvc_poll
  kopald-1204    0d.h.  243us : hvc_kick <-hvc_handle_interrupt
  kopald-1204    0d.h.  243us : wake_up_process <-hvc_kick
  kopald-1204    0d.h.  244us : try_to_wake_up <-hvc_kick
  kopald-1204    0d.h.  244us : _raw_spin_lock_irqsave <-try_to_wake_up
  kopald-1204    0d.h.  244us : _raw_spin_unlock_irqrestore <-try_to_wake_up
---
 drivers/tty/hvc/hvc_console.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)
drivers/tty/hvc/hvc_console.c +22 -2
index c917749708d2..bacf9b73ec98 100644
@@ -623,6 +623,15 @@ static int hvc_chars_in_buffer(struct tty_struct *tty)
 #define MAX_TIMEOUT		(2000)
 static u32 timeout = MIN_TIMEOUT;
 
+/*
+ * Maximum number of bytes to get from the console driver if hvc_poll is
+ * called from driver (and can't sleep). Any more than this and we break
+ * and start polling with khvcd. This value was derived from from an OpenBMC
+ * console with the OPAL driver that results in about 0.25ms interrupts off
+ * latency.
+ */
+#define HVC_ATOMIC_READ_MAX	128
+
 #define HVC_POLL_READ	0x00000001
 #define HVC_POLL_WRITE	0x00000002
 
@@ -669,8 +678,8 @@ static int __hvc_poll(struct hvc_struct *hp, bool may_sleep)
 	if (!hp->irq_requested)
 		poll_mask |= HVC_POLL_READ;
 
+ read_again:
 	/* Read data if any */
-
 	count = tty_buffer_request_room(&hp->port, N_INBUF);
 
 	/* If flip is full, just reschedule a later read */
@@ -717,7 +726,18 @@ static int __hvc_poll(struct hvc_struct *hp, bool may_sleep)
 #endif /* CONFIG_MAGIC_SYSRQ */
 		tty_insert_flip_char(&hp->port, buf[i], 0);
 	}
-	read_total = n;
+	read_total += n;
+
+	if (may_sleep) {
+		/* Keep going until the flip is full */
+		spin_unlock_irqrestore(&hp->lock, flags);
+		cond_resched();
+		spin_lock_irqsave(&hp->lock, flags);
+		goto read_again;
+	} else if (read_total < HVC_ATOMIC_READ_MAX) {
+		/* Break and defer if it's a large read in atomic */
+		goto read_again;
+	}
 
 	/*
 	 * Latency break, schedule another poll immediately.
Signature · 1 line
2.18.0
#3 lore raw

PATCH v2 3/3 tty: hvc: hvc_write() fix break condition

In reply to Nicholas Piggin

Commit 550ddadcc758 ("tty: hvc: hvc_write() may sleep") broke the termination condition in case the driver stops accepting characters. This can result in unnecessary polling of the busy driver.

Restore it by testing the hvc_push return code.

---
 drivers/tty/hvc/hvc_console.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/tty/hvc/hvc_console.c +6 -1
index bacf9b73ec98..27284a2dcd2b 100644
@@ -522,6 +522,8 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count
 		return -EIO;
 
 	while (count > 0) {
+		int ret = 0;
+
 		spin_lock_irqsave(&hp->lock, flags);
 
 		rsize = hp->outbuf_size - hp->n_outbuf;
@@ -537,10 +539,13 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count
 		}
 
 		if (hp->n_outbuf > 0)
-			hvc_push(hp);
+			ret = hvc_push(hp);
 
 		spin_unlock_irqrestore(&hp->lock, flags);
 
+		if (!ret)
+			break;
+
 		if (count) {
 			if (hp->n_outbuf > 0)
 				hvc_flush(hp);
Signature · 1 line
2.18.0
#4 lore raw
In reply to Nicholas Piggin
Quoted 5 lines · Nicholas Piggin

Re-sending this one with the used-uinitialized warning in patch 3 fixed.

Greg these patches are needed to fix regressions in this merge window, please consider them for your tty tree.

All now queued up, thanks.

greg k-h