synopsys/hsdk: Linux Boot log cleanup
PATCH v2 1/1 synopsys/hsdk: Linux Boot log cleanup
This patch removes duplicate messages in Linux log on HSDK board. For HSDK board we setup bootargs via device tree,
see https://elixir.bootlin.com/linux/latest/source/arch/arc/boot/dts/hsdk.dts#L25
"console=ttyS3" was mistakenly placed in u-boot bootargs which are appended to Kernel bootargs in case of using buildin .dtb.
Before patch log is like:
------------------------8<------------------------------------- mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,... mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,...
mmc0: new SDHC card at address 59b4
mmc0: new SDHC card@address 59b4blk_queue_max_segment_size: set to minimum 8192 blk_queue_max_segment_size: set to minimum 8192 ------------------------>8-------------------------------------
After patch log is like:
------------------------8<------------------------------------- mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,...
mmc0: new SDHC card at address 59b4 blk_queue_max_segment_size: set to minimum 8192 ------------------------8<-------------------------------------
---
Changes since v1:
-Commit message includes more correct info
board/synopsys/hsdk/uboot.env.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/synopsys/hsdk/uboot.env.txt +1 -1
@@ -1,5 +1,5 @@ baudrate=115200 -bootargs=console=ttyS3,115200n8 root=/dev/mmcblk0p2 rootwait +bootargs=root=/dev/mmcblk0p2 rootwait bootcmd=fatload mmc 0:1; bootm bootdelay=2 bootfile=uImage
Signature · 1 line
2.16.2
Thomas Petazzoni
AppliedPATCH v2 1/1 synopsys/hsdk: Linux Boot log cleanup
Hello,
Quoted 6 lines · Evgeniy Didin
This patch removes duplicate messages in Linux log on HSDK board. For HSDK board we setup bootargs via device tree,
see https://elixir.bootlin.com/linux/latest/source/arch/arc/boot/dts/hsdk.dts#L25
"console=ttyS3" was mistakenly placed in u-boot bootargs which are appended to Kernel bootargs in case of using buildin .dtb.
Quoted 9 lines
Before patch log is like:
------------------------8<-------------------------------------mmc_hostmmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,...mmc_hostmmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,...
mmc0: new SDHC card at address 59b4
mmc0: new SDHC card at address 59b4blk_queue_max_segment_size: set to minimum 8192blk_queue_max_segment_size: set to minimum 8192 ------------------------>8-------------------------------------
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com