btrfs: qgroup: Reduce dirty extents for metadata
Subsystems (2)
v3 cover btrfs: qgroup: Reduce dirty extents for metadata
This patchset can be fetched from github:
https://github.com/adam900710/linux/tree/qgroup_balance_skip_trees
The base commit is v4.19-rc1 tag.
There are a lot of reports of system hang for balance on quota enabled fs.
It's most obvious for large fs.
The hang is caused by tons of unmodified extents marked as qgroup dirty. Such unmodified/unrelated sources include:
1) Unmodified subtree
2) Subtree drop for reloc tree
(BTW, other sources includes unmodified file extent items)
E.g.
OO = Old tree blocks from file tree
NN = New tree blocks from reloc tree
file tree reloc tree
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO OO OO OO NN
(d) (e) (f) (g) (d) (e) (f) (g)
In above case, balance will modify nodeptr in OO(a) to point NN(b) and NN(c), and modify NN(a) to point to OO(B) and OO(c).
Before this patch, quota will mark the whole subtree from its parent down to the leaves as dirty.
So btrfs quota need to trace all tree block from (a) to (g).
However tree blocks (d) (e) (f) are shared between both trees, thus there is no need to trace those 3 tree blocks.
This patchset will change how this work by only tracing modified tree blocks in reloc tree, and their counter parts in file tree.
With this patch, we could skip tree blocks OO(d)~OO(f) in above example, thus reduce some some overhead caused by qgroup.
The improvement is mostly related to metadata relocation.
Also, for metadata relocation, we don't really need to trace data extents as they're not modified at all.
[[Benchmark]]
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.
Mkfs parameter:
--nodesize 4K (To bump up tree size)
Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)
Snapshots:
16 snapshots of the original subvolume. each snapshot has 3 random files modified.
balance parameter:
-m
So the content should be pretty similar to a real world root fs layout.
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22874 | 22856 | +0.1% qgroup dirty extents | 225251 | 140431 | -37.7% time (sys) | 40.161s | 20.574s | -48.7% time (real) | 42.163s | 25.173s | -40.3%
*: (val_new - val_old) / val_old * 100%
And the difference is becoming more and more obvious if more snapshots are created.
If we increase the number of snapshots to 64 (4 times the number of references, and 64 snapshots is already not recommended to use with quota)
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22462 | 22467 | +0.0% qgroup dirty extents | 314380 | 140826 | -55.2% time (sys) | 158.033s | 74.292s | -53.0% time (real) | 197.395s | 90.529s | -67.6%
For larger fs the saving should be even more obvious.
Changelog:
v2:
Rename "tree reloc tree" to "reloc tree".
Add patch "Don't trace subtree if we're dropping reloc tree" into the patchset.
Fix wrong btrfs_bin_search() call, which leads to unexpected ENOENT error for btrfs_qgroup_trace_extent_swap(). Now use dst_path->slots[] directly.
v3:
Add new patch to avoid unnecessary data extents trace for metadata relocation.
Better delayed ref time root owner detection to avoid unnecessary tree block tracing.
Add benchmark result for the patchset.
Qu Wenruo (7):
btrfs: qgroup: Introduce trace event to analyse the number of dirty
extents accounted
btrfs: qgroup: Introduce function to trace two swaped extents
btrfs: qgroup: Introduce function to find all new tree blocks of reloc
tree
btrfs: qgroup: Use generation aware subtree swap to mark dirty extents
btrfs: qgroup: Don't trace subtree if we're dropping reloc tree
btrfs: delayed-ref: Introduce new parameter for
btrfs_add_delayed_tree_ref() to reduce unnecessary qgroup tracing
btrfs: qgroup: Only trace data extents in leaves if we're relocating
data block group
fs/btrfs/delayed-ref.c | 5 +- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 25 ++- fs/btrfs/qgroup.c | 347 +++++++++++++++++++++++++++++++++++ fs/btrfs/qgroup.h | 11 ++ fs/btrfs/relocation.c | 15 +- include/trace/events/btrfs.h | 21 +++ 7 files changed, 405 insertions(+), 20 deletions(-)
Signature · 1 line
2.18.0
PATCH v3 1/7 btrfs: qgroup: Introduce trace event to analyse the number of dirty extents accounted
Number of qgroup dirty extents is directly linked to the performance overhead, so add a new trace event, trace_qgroup_num_dirty_extents(), to record how many dirty extents is processed in btrfs_qgroup_account_extents().
This will be pretty handy to analyse later balance performance improvement.
--- fs/btrfs/qgroup.c | 4 ++++ include/trace/events/btrfs.h | 21 +++++++++++++++++++++ 2 files changed, 25 insertions(+)
fs/btrfs/qgroup.c +4 -0
@@ -2133,6 +2133,7 @@ int btrfs_qgroup_account_extents(struct btrfs_trans_handle *trans)struct btrfs_delayed_ref_root *delayed_refs;struct ulist *new_roots =NULL ;struct rb_node *node; +u64 num_dirty_extents =0 ;u64 qgroup_to_skip;int ret =0 ;
@@ -2142,6 +2143,7 @@ int btrfs_qgroup_account_extents(struct btrfs_trans_handle *trans) record = rb_entry(node, struct btrfs_qgroup_extent_record, node); + num_dirty_extents++;trace_btrfs_qgroup_account_extents (fs_info, record);if (!ret) {
@@ -2187,6 +2189,8 @@ int btrfs_qgroup_account_extents(struct btrfs_trans_handle *trans)kfree (record); } +trace_qgroup_num_dirty_extents (fs_info, trans->transid, + num_dirty_extents);return ret; }
include/trace/events/btrfs.h +21 -0
@@ -1575,6 +1575,27 @@ DEFINE_EVENT(btrfs_qgroup_extent, btrfs_qgroup_trace_extent,TP_ARGS (fs_info, rec) ); +TRACE_EVENT (qgroup_num_dirty_extents, + + TP_PROTO(const struct btrfs_fs_info *fs_info, u64 transid, + u64 num_dirty_extents), + +TP_ARGS (fs_info, transid, num_dirty_extents), + +TP_STRUCT__entry_btrfs ( + __field( u64, transid ) +__field ( u64, num_dirty_extents ) + ), + +TP_fast_assign_btrfs (fs_info, + __entry->transid = transid; + __entry->num_dirty_extents = num_dirty_extents; + ), + +TP_printk_btrfs ("transid=%llu num_dirty_extents=%llu" , + __entry->transid, __entry->num_dirty_extents) +); + TRACE_EVENT(btrfs_qgroup_account_extent, TP_PROTO(const struct btrfs_fs_info *fs_info, u64 transid, u64 bytenr,
Signature · 1 line
2.18.0
Re: [PATCH v3 1/7] btrfs: qgroup: Introduce trace event to analyse the number of dirty extents accounted
Quoted 9 lines · Qu Wenruo
Number of qgroup dirty extents is directly linked to the performance overhead, so add a new trace event,
trace_qgroup_num_dirty_extents(), to record how many dirty extents is processed inbtrfs_qgroup_account_extents().This will be pretty handy to analyse later balance performance improvement.
Signed-off-by Qu Wenruo <[email protected]>
PATCH v3 2/7 btrfs: qgroup: Introduce function to trace two swaped extents
In reply to Qu WenruoIntroduce a new function, qgroup_trace_extent_swap(), which will be used later for balance qgroup speedup.
The basis idea of balance is swapping tree blocks between reloc tree and the real file tree.
The swap will happen in highest tree block, but there may be a lot of tree blocks involved.
For example:
OO = Old tree blocks
NN = New tree blocks allocated during balance
File tree (257) Reloc tree for 257
L2 OO NN
/ \ / \
L1 OO OO (a) OO NN (a)
/ \ / \ / \ / \
L0 OO OO OO OO OO OO NN NN
(b) (c) (b) (c)When calling qgroup_trace_extent_swap(), we will pass:
@src_eb = OO(a)
@dst_path = [ nodes[1] = NN(a), nodes[0] = NN(c) ] @dst_level = 0
@root_level = 1
In that case, qgroup_trace_extent_swap() will search from OO(a) to reach OO(c), then mark both OO(c) and NN(c) as qgroup dirty.
The main work of qgroup_trace_extent_swap() can be split into 3 parts:
1) Tree search from @src_eb
It should acts as a simplified btrfs_search_slot().
The key for search can be extracted from @dst_path->nodes[dst_level] (first key).
2) Mark the final tree blocks in @src_path and @dst_path qgroup dirty
NOTE: In above case, OO(a) and NN(a) won't be marked qgroup dirty. They should be marked during preivous (@dst_level = 1) iteration.
3) Mark file extents in leaves dirty
We don't have good way to pick out new file extents only. So we still follow the old method by scanning all file extents in the leave.
This function can free us from keeping two pathes, thus later we only need to care about how to iterate all new tree blocks in reloc tree.
--- fs/btrfs/qgroup.c | 126 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+)
fs/btrfs/qgroup.c +126 -0
@@ -1713,6 +1713,132 @@ static int adjust_slots_upwards(struct btrfs_path *path, int root_level)return 0 ; } +/* +* helper function to trace a subtree tree block swap. +* +* The swapped tree block is marked by @dst_path->nodes[level]. +* Thus @dst_path should have been populated already. +* +* While for src tree block, we only need the root eb as @src_eb. +* The needed path and search will done by this function. +*/ +static int qgroup_trace_extent_swap (struct btrfs_trans_handle * trans, +struct extent_buffer *src_eb, +struct btrfs_path *dst_path, +int dst_level,int root_level) +{ +struct btrfs_key key; +struct btrfs_path *src_path; +struct btrfs_fs_info *fs_info = trans->fs_info; +u32 nodesize = fs_info->nodesize; +int cur_level = root_level; +int ret; + +BUG_ON (dst_level > root_level); +/* Level mismatch */ +if (btrfs_header_level (src_eb) != root_level) +return -EINVAL ; + + src_path =btrfs_alloc_path (); +if (!src_path) { + ret = -ENOMEM ; + goto out; + } + +if (dst_level) +btrfs_node_key_to_cpu (dst_path->nodes[dst_level], &key,0 ); +else +btrfs_item_key_to_cpu (dst_path->nodes[dst_level], &key,0 ); + +/* For src_path */ +extent_buffer_get (src_eb); + src_path->nodes[root_level] = src_eb; + src_path->slots[root_level] = dst_path->slots[root_level]; + src_path->locks[root_level] =0 ; + +/* A simplified version of btrfs_search_slot() */ +while (cur_level >= dst_level) { +struct btrfs_key src_key; +struct btrfs_key dst_key; + +if (src_path->nodes[cur_level] ==NULL ) { +struct btrfs_key first_key; +struct extent_buffer *eb; +int parent_slot; +u64 child_gen; +u64 child_bytenr; + + eb = src_path->nodes[cur_level +1 ]; + parent_slot = src_path->slots[cur_level +1 ]; + child_bytenr =btrfs_node_blockptr (eb, parent_slot); + child_gen =btrfs_node_ptr_generation (eb, parent_slot); +btrfs_node_key_to_cpu (eb, &first_key, parent_slot); + + eb =read_tree_block (fs_info, child_bytenr, child_gen, + cur_level, &first_key); +if (IS_ERR (eb)) { + ret =PTR_ERR (eb); + goto out; + }else if (!extent_buffer_uptodate (eb)) { +free_extent_buffer (eb); + ret = -EIO ; + goto out; + } + + src_path->nodes[cur_level] = eb; + +btrfs_tree_read_lock (eb); +btrfs_set_lock_blocking_rw (eb,BTRFS_READ_LOCK ); + src_path->locks[cur_level] =BTRFS_READ_LOCK_BLOCKING ; + } + + src_path->slots[cur_level] = dst_path->slots[cur_level]; +if (cur_level) { +btrfs_node_key_to_cpu (dst_path->nodes[cur_level], &dst_key, + dst_path->slots[cur_level]); +btrfs_node_key_to_cpu (src_path->nodes[cur_level], &src_key, + src_path->slots[cur_level]); + }else { +btrfs_item_key_to_cpu (dst_path->nodes[cur_level], &dst_key, + dst_path->slots[cur_level]); +btrfs_item_key_to_cpu (src_path->nodes[cur_level], &src_key, + src_path->slots[cur_level]); + } +/* Content mismatch, something went wrong */ +if (btrfs_comp_cpu_keys (&dst_key, &src_key)) { + ret = -ENOENT ; + goto out; + } + cur_level--; + } + +/* +* Now both @dst_path and @src_path have been populated, record the tree +* blocks for qgroup accounting. +*/ + ret =btrfs_qgroup_trace_extent (trans, + src_path->nodes[dst_level]->start, + nodesize,GFP_NOFS ); +if (ret <0 ) + goto out; + ret =btrfs_qgroup_trace_extent (trans, + dst_path->nodes[dst_level]->start, + nodesize,GFP_NOFS ); +if (ret <0 ) + goto out; + +/* Record leaf file extents */ +if (dst_level ==0 ) { + ret =btrfs_qgroup_trace_leaf_items (trans, src_path->nodes[0 ]); +if (ret <0 ) + goto out; + ret =btrfs_qgroup_trace_leaf_items (trans, dst_path->nodes[0 ]); + } +out: +btrfs_free_path (src_path); +return ret; +} +int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level)
Signature · 1 line
2.18.0
PATCH v3 3/7 btrfs: qgroup: Introduce function to find all new tree blocks of reloc tree
In reply to Qu WenruoIntroduce new function, qgroup_trace_new_subtree_blocks(), to iterate all new tree blocks in a reloc tree.
So that qgroup could skip unrelated tree blocks during balance, which should hugely speedup balance speed when quota is enabled.
The function qgroup_trace_new_subtree_blocks() itself only cares about new tree blocks in reloc tree.
All its main works are:
1) Read out tree blocks according to parent pointers
2) Do recursive depth-first search
Will call the same function on all its children tree blocks, with search level set to current level -1.
And will also skip all children whose generation is smaller than @last_snapshot.
3) Call qgroup_trace_extent_swap() to trace tree blocks
So although we have parameter list related to source file tree, it's not used at all, but only passed to qgroup_trace_extent_swap(). Thus despite the tree read code, the core should be pretty short and all about recursive depth-first search.
--- fs/btrfs/qgroup.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+)
fs/btrfs/qgroup.c +114 -0
@@ -1839,6 +1839,120 @@ static int qgroup_trace_extent_swap(struct btrfs_trans_handle* trans,return ret; } +/* +* Helper function to do recursive generation aware depth-first search, to +* locate all new tree blocks in a subtree of tree reloc tree. +* +* E.g. (OO = Old tree blocks, NN = New tree blocks, whose gen == last_snapshot) +* Tree reloc tree +* L2 NN (a) +* / \ +* L1 OO NN (b) +* / \ / \ +* L0 OO OO OO NN +* (c) (d) +* If we pass: +* @dst_path = [ nodes[1] = NN(b), nodes[0] = NULL ], +* @cur_level = 1 +* @root_level = 1 +* +* We will iterate through tree blocks NN(b), NN(d) and info qgroup to trace +* above tree blocks along with their counter parts in file tree. +* While during search, old tree blocsk OO(c) will be skiped as tree block swap +* won't affect OO(c). +*/ +static int qgroup_trace_new_subtree_blocks (struct btrfs_trans_handle * trans, +struct extent_buffer *src_eb, +struct btrfs_path *dst_path, +int cur_level,int root_level, +u64 last_snapshot) +{ +struct btrfs_fs_info *fs_info = trans->fs_info; +struct extent_buffer *eb; +bool need_cleanup = false; +int ret =0 ; +int i; + +/* Read the tree block if needed */ +if (dst_path->nodes[cur_level] ==NULL ) { +struct btrfs_key first_key; +int parent_slot; +u64 child_gen; +u64 child_bytenr; + +/* +* We need to get child blockptr/gen from parent before +* we can read it. +*/ + eb = dst_path->nodes[cur_level +1 ]; + parent_slot = dst_path->slots[cur_level +1 ]; + child_bytenr =btrfs_node_blockptr (eb, parent_slot); + child_gen =btrfs_node_ptr_generation (eb, parent_slot); +btrfs_node_key_to_cpu (eb, &first_key, parent_slot); + +/* This node is old, no need to trace */ +if (child_gen < last_snapshot) + goto out; + + eb =read_tree_block (fs_info, child_bytenr, child_gen, + cur_level, &first_key); +if (IS_ERR (eb)) { + ret =PTR_ERR (eb); + goto out; + }else if (!extent_buffer_uptodate (eb)) { +free_extent_buffer (eb); + ret = -EIO ; + goto out; + } + + dst_path->nodes[cur_level] = eb; + dst_path->slots[cur_level] =0 ; + +btrfs_tree_read_lock (eb); +btrfs_set_lock_blocking_rw (eb,BTRFS_READ_LOCK ); + dst_path->locks[cur_level] =BTRFS_READ_LOCK_BLOCKING ; + need_cleanup = true; + } + +/* Now record this tree block and its counter part for qgroups */ + ret =qgroup_trace_extent_swap (trans, src_eb, dst_path, cur_level, + root_level); +if (ret <0 ) + goto cleanup; + + eb = dst_path->nodes[cur_level]; + +if (cur_level >0 ) { +/* Iterate all children tree blocks */ +for (i =0 ; i <btrfs_header_nritems (eb); i++) { +/* Skip old tree blocks as they won't be swapped */ +if (btrfs_node_ptr_generation (eb, i) < last_snapshot) +continue ; + dst_path->slots[cur_level] = i; + +/* Recursive call (at most 7 times) */ + ret =qgroup_trace_new_subtree_blocks (trans, src_eb, + dst_path, cur_level -1 , root_level, + last_snapshot); +if (ret <0 ) + goto cleanup; + } + } + +cleanup: +if (need_cleanup) { +/* Clean up */ +btrfs_tree_unlock_rw (dst_path->nodes[cur_level], + dst_path->locks[cur_level]); +free_extent_buffer (dst_path->nodes[cur_level]); + dst_path->nodes[cur_level] =NULL ; + dst_path->slots[cur_level] =0 ; + dst_path->locks[cur_level] =0 ; + } +out: +return ret; +} +int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level)
Signature · 1 line
2.18.0
Re: [PATCH v3 3/7] btrfs: qgroup: Introduce function to find all new tree blocks of reloc tree
Quoted 61 lines · Qu Wenruo
Introduce new function,
qgroup_trace_new_subtree_blocks(), to iterate all new tree blocks in a reloc tree.
So that qgroup could skip unrelated tree blocks during balance, which should hugely speedup balance speed when quota is enabled.The function
qgroup_trace_new_subtree_blocks()itself only cares about new tree blocks in reloc tree.All its main works are:
1) Read out tree blocks according to parent pointers
2) Do recursive depth-first search
Will call the same function on all its children tree blocks, with search level set to current level -1.
And will also skip all children whose generation is smaller than @last_snapshot.3) Call
qgroup_trace_extent_swap()to trace tree blocksSo although we have parameter list related to source file tree, it's not used at all, but only passed to
qgroup_trace_extent_swap(). Thus despite the tree read code, the core should be pretty short and all about recursive depth-first search.Signed-off-by Qu Wenruo <[email protected]>--- fs/btrfs/qgroup.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+)fs/btrfs/qgroup.c +23
-0@@ -1839,6 +1839,120 @@ static int qgroup_trace_extent_swap(struct btrfs_trans_handle* trans,return ret; } +/* +* Helper function to do recursive generation aware depth-first search, to +* locate all new tree blocks in a subtree of tree reloc tree. +* +* E.g. (OO = Old tree blocks, NN = New tree blocks, whose gen == last_snapshot) +* Tree reloc tree +* L2 NN (a) +* / \ +* L1 OO NN (b) +* / \ / \ +* L0 OO OO OO NN +* (c) (d) +* If we pass: +* @dst_path = [ nodes[1] = NN(b), nodes[0] = NULL ], +* @cur_level = 1 +* @root_level = 1 +* +* We will iterate through tree blocks NN(b), NN(d) and info qgroup to trace +* above tree blocks along with their counter parts in file tree. +* While during search, old tree blocsk OO(c) will be skiped as tree block swap +* won't affect OO(c). +*/ +static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,
fs/btrfs/qgroup.c static int qgroup_trace_extent_swap(struct btrfs_trans_handle* trans, · line 1874
Quoted 10 lines
fs/btrfs/qgroup.c +10
-0+struct extent_buffer *src_eb, + struct btrfs_path *dst_path, + int cur_level, int root_level, + u64 last_snapshot) +{ + struct btrfs_fs_info *fs_info = trans->fs_info; +struct extent_buffer *eb; +bool need_cleanup = false; +int ret =0 ; +int i;
This function could be called recursively based on the value of cur_level so please add some sanity checks so this does not accidentally escape. It needs to be a plain if/return, not just an assert or bug-on.
Quoted 86 lines
fs/btrfs/qgroup.c +81
-0+ +/* Read the tree block if needed */ +if (dst_path->nodes[cur_level] ==NULL ) { +struct btrfs_key first_key; +int parent_slot; +u64 child_gen; +u64 child_bytenr; + +/* +* We need to get child blockptr/gen from parent before +* we can read it. +*/ + eb = dst_path->nodes[cur_level +1 ]; + parent_slot = dst_path->slots[cur_level +1 ]; + child_bytenr =btrfs_node_blockptr (eb, parent_slot); + child_gen =btrfs_node_ptr_generation (eb, parent_slot); +btrfs_node_key_to_cpu (eb, &first_key, parent_slot); + +/* This node is old, no need to trace */ +if (child_gen < last_snapshot) + goto out; + + eb =read_tree_block (fs_info, child_bytenr, child_gen, + cur_level, &first_key); +if (IS_ERR (eb)) { + ret =PTR_ERR (eb); + goto out; + }else if (!extent_buffer_uptodate (eb)) { +free_extent_buffer (eb); + ret = -EIO ; + goto out; + } + + dst_path->nodes[cur_level] = eb; + dst_path->slots[cur_level] =0 ; + +btrfs_tree_read_lock (eb); +btrfs_set_lock_blocking_rw (eb,BTRFS_READ_LOCK ); + dst_path->locks[cur_level] =BTRFS_READ_LOCK_BLOCKING ; + need_cleanup = true; + } + +/* Now record this tree block and its counter part for qgroups */ + ret =qgroup_trace_extent_swap (trans, src_eb, dst_path, cur_level, + root_level); +if (ret <0 ) + goto cleanup; + + eb = dst_path->nodes[cur_level]; + +if (cur_level >0 ) { +/* Iterate all children tree blocks */ +for (i =0 ; i <btrfs_header_nritems (eb); i++) { +/* Skip old tree blocks as they won't be swapped */ +if (btrfs_node_ptr_generation (eb, i) < last_snapshot) +continue ; + dst_path->slots[cur_level] = i; + +/* Recursive call (at most 7 times) */ + ret =qgroup_trace_new_subtree_blocks (trans, src_eb, + dst_path, cur_level -1 , root_level, + last_snapshot); +if (ret <0 ) + goto cleanup; + } + } + +cleanup: +if (need_cleanup) { +/* Clean up */ +btrfs_tree_unlock_rw (dst_path->nodes[cur_level], + dst_path->locks[cur_level]); +free_extent_buffer (dst_path->nodes[cur_level]); + dst_path->nodes[cur_level] =NULL ; + dst_path->slots[cur_level] =0 ; + dst_path->locks[cur_level] =0 ; + } +out: +return ret; +} +int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level)Signature · 1 line
2.18.0
Re: [PATCH v3 3/7] btrfs: qgroup: Introduce function to find all new tree blocks of reloc tree
Quoted 68 lines · David Sterba
Quoted 67 lines · Qu Wenruo
Introduce new function,
qgroup_trace_new_subtree_blocks(), to iterate all new tree blocks in a reloc tree.
So that qgroup could skip unrelated tree blocks during balance, which should hugely speedup balance speed when quota is enabled.The function
qgroup_trace_new_subtree_blocks()itself only cares about new tree blocks in reloc tree.All its main works are:
1) Read out tree blocks according to parent pointers
2) Do recursive depth-first search
Will call the same function on all its children tree blocks, with search level set to current level -1.
And will also skip all children whose generation is smaller than @last_snapshot.3) Call
qgroup_trace_extent_swap()to trace tree blocksSo although we have parameter list related to source file tree, it's not used at all, but only passed to
qgroup_trace_extent_swap(). Thus despite the tree read code, the core should be pretty short and all about recursive depth-first search.Signed-off-by Qu Wenruo <[email protected]>--- fs/btrfs/qgroup.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+)fs/btrfs/qgroup.c +29
-0@@ -1839,6 +1839,120 @@ static int qgroup_trace_extent_swap(struct btrfs_trans_handle* trans,return ret; } +/* +* Helper function to do recursive generation aware depth-first search, to +* locate all new tree blocks in a subtree of tree reloc tree. +* +* E.g. (OO = Old tree blocks, NN = New tree blocks, whose gen == last_snapshot) +* Tree reloc tree +* L2 NN (a) +* / \ +* L1 OO NN (b) +* / \ / \ +* L0 OO OO OO NN +* (c) (d) +* If we pass: +* @dst_path = [ nodes[1] = NN(b), nodes[0] = NULL ], +* @cur_level = 1 +* @root_level = 1 +* +* We will iterate through tree blocks NN(b), NN(d) and info qgroup to trace +* above tree blocks along with their counter parts in file tree. +* While during search, old tree blocsk OO(c) will be skiped as tree block swap +* won't affect OO(c). +*/ +static int qgroup_trace_new_subtree_blocks (struct btrfs_trans_handle * trans, +struct extent_buffer *src_eb, +struct btrfs_path *dst_path, +int cur_level,int root_level, +u64 last_snapshot) +{ +struct btrfs_fs_info *fs_info = trans->fs_info;
Quoted 8 lines
fs/btrfs/qgroup.c static int qgroup_trace_extent_swap(struct btrfs_trans_handle* trans, · line 1874
Quoted 4 lines
fs/btrfs/qgroup.c +4
-0+struct extent_buffer *eb; +bool need_cleanup = false; +int ret =0 ; +int i;This function could be called recursively based on the value of
cur_levelso please add some sanity checks so this does not accidentally escape. It needs to be a plain if/return, not just an assert or bug-on.
OK, I'll add a cur_level check here, and also enhance tree-checker to do a level check for nodes/leaves, so we could catch level problem even earlier, and keep all level passed into this function is valid.
Thanks,
Qu
Quoted 87 lines
Quoted 87 lines
fs/btrfs/qgroup.c +81
-0+ +/* Read the tree block if needed */ +if (dst_path->nodes[cur_level] ==NULL ) { +struct btrfs_key first_key; +int parent_slot; +u64 child_gen; +u64 child_bytenr; + +/* +* We need to get child blockptr/gen from parent before +* we can read it. +*/ + eb = dst_path->nodes[cur_level +1 ]; + parent_slot = dst_path->slots[cur_level +1 ]; + child_bytenr =btrfs_node_blockptr (eb, parent_slot); + child_gen =btrfs_node_ptr_generation (eb, parent_slot); +btrfs_node_key_to_cpu (eb, &first_key, parent_slot); + +/* This node is old, no need to trace */ +if (child_gen < last_snapshot) + goto out; + + eb =read_tree_block (fs_info, child_bytenr, child_gen, + cur_level, &first_key); +if (IS_ERR (eb)) { + ret =PTR_ERR (eb); + goto out; + }else if (!extent_buffer_uptodate (eb)) { +free_extent_buffer (eb); + ret = -EIO ; + goto out; + } + + dst_path->nodes[cur_level] = eb; + dst_path->slots[cur_level] =0 ; + +btrfs_tree_read_lock (eb); +btrfs_set_lock_blocking_rw (eb,BTRFS_READ_LOCK ); + dst_path->locks[cur_level] =BTRFS_READ_LOCK_BLOCKING ; + need_cleanup = true; + } + +/* Now record this tree block and its counter part for qgroups */ + ret =qgroup_trace_extent_swap (trans, src_eb, dst_path, cur_level, + root_level); +if (ret <0 ) + goto cleanup; + + eb = dst_path->nodes[cur_level]; + +if (cur_level >0 ) { +/* Iterate all children tree blocks */ +for (i =0 ; i <btrfs_header_nritems (eb); i++) { +/* Skip old tree blocks as they won't be swapped */ +if (btrfs_node_ptr_generation (eb, i) < last_snapshot) +continue ; + dst_path->slots[cur_level] = i; + +/* Recursive call (at most 7 times) */ + ret =qgroup_trace_new_subtree_blocks (trans, src_eb, + dst_path, cur_level -1 , root_level, + last_snapshot); +if (ret <0 ) + goto cleanup; + } + } + +cleanup: +if (need_cleanup) { +/* Clean up */ +btrfs_tree_unlock_rw (dst_path->nodes[cur_level], + dst_path->locks[cur_level]); +free_extent_buffer (dst_path->nodes[cur_level]); + dst_path->nodes[cur_level] =NULL ; + dst_path->slots[cur_level] =0 ; + dst_path->locks[cur_level] =0 ; + } +out: +return ret; +} +int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level)Signature · 1 line
2.18.0
PATCH v3 4/7 btrfs: qgroup: Use generation aware subtree swap to mark dirty extents
In reply to Qu WenruoBefore this patch, for quota enabled balance, btrfs needs to mark the whole subtree dirty for quota.
E.g.
OO = Old tree blocks (from file tree)
NN = New tree blocks (from reloc tree)
File tree (src) Reloc tree (dst)
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO (d) OO OO OO NN (d)
For old balance + quota case, quota will mark the whole src and dst tree dirty, including all the 3 old tree blocks in reloc tree.
It's doable for small file tree or new tree blocks are all located at lower level.
But for large file tree or new tree blocks are all located at higher level, this will lead to mark the whole tree dirty, and be unbelievably slow.
This patch will change how we handle such balance with quota enabled case.
Now we will search from (b) and (c) for any new tree blocks whose generation is equal to @last_snapshot, and only mark them dirty.
In above case, we only need to trace tree blocks NN(b), NN(c) and NN(d). (NN(a) will be traced when CoW happens for nodeptr modification). And also for tree blocks OO(b), OO(c), OO(d). (OO(a) will be traced when CoW happens for nodeptr modification)
For above case, we could skip 3 tree blocks, but for larger tree, we can skip tons of unmodified tree blocks, and hugely speed up balance.
This patch will introduce a new function, btrfs_qgroup_trace_subtree_swap(), which will do the following main work:
1) Read out real root eb
And setup basic dst_path for later calls
2) Call qgroup_trace_new_subtree_blocks()
To trace all new tree blocks in reloc tree and their counter parts in file tree.
--- fs/btrfs/qgroup.c | 94 +++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/qgroup.h | 10 +++++ fs/btrfs/relocation.c | 11 ++--- 3 files changed, 107 insertions(+), 8 deletions(-)
fs/btrfs/qgroup.c +94 -0
@@ -1953,6 +1953,100 @@ static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,return ret; } +/* +* For balance subtree swap. +* +* Will go down the tree block pointed by @dst_eb (pointed by @dst_parent and +* @dst_slot), and find any tree blocks whose generation is at @last_snapshot, +* and then go down @src_eb (pointed by @src_parent and @src_slot) to find +* the conterpart of the tree block, then mark both tree blocks as qgroup dirty, +* and skip all tree blocks whose generation is smaller than last_snapshot. +* +* This would skip tons of tree blocks of original btrfs_qgroup_trace_subtree(), +* which is the culprit of super slow balance if the file tree is large. +* +* @src_parent, @src_slot: pointer to src (file tree) eb. +* @dst_parent, @dst_slot: pointer to dst (tree reloc tree) eb. +*/ +int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct extent_buffer *src_parent,int src_slot, +struct extent_buffer *dst_parent,int dst_slot, +u64 last_snapshot) +{ +struct btrfs_fs_info *fs_info = trans->fs_info; +struct btrfs_path *dst_path =NULL ; +struct btrfs_key first_key; +struct extent_buffer *src_eb =NULL ; +struct extent_buffer *dst_eb =NULL ; +u64 child_gen; +u64 child_bytenr; +int level; +int ret; + +if (!test_bit (BTRFS_FS_QUOTA_ENABLED , &fs_info->flags)) +return 0 ; + +/* Wrong parameter order */ +BUG_ON (btrfs_node_ptr_generation (src_parent, src_slot) > +btrfs_node_ptr_generation (dst_parent, dst_slot)); + +/* Read out real @src_eb, pointed by @src_parent and @src_slot */ + child_bytenr =btrfs_node_blockptr (src_parent, src_slot); + child_gen =btrfs_node_ptr_generation (src_parent, src_slot); +btrfs_node_key_to_cpu (src_parent, &first_key, src_slot); + + src_eb =read_tree_block (fs_info, child_bytenr, child_gen, +btrfs_header_level (src_parent) -1 , &first_key); +if (IS_ERR (src_eb)) { + ret =PTR_ERR (src_eb); + goto out; + } + +/* Read out real @dst_eb, pointed by @src_parent and @src_slot */ + child_bytenr =btrfs_node_blockptr (dst_parent, dst_slot); + child_gen =btrfs_node_ptr_generation (dst_parent, dst_slot); +btrfs_node_key_to_cpu (dst_parent, &first_key, dst_slot); + + dst_eb =read_tree_block (fs_info, child_bytenr, child_gen, +btrfs_header_level (dst_parent) -1 , &first_key); +if (IS_ERR (dst_eb)) { + ret =PTR_ERR (dst_eb); + goto out; + } + +if (!extent_buffer_uptodate (src_eb) || !extent_buffer_uptodate (dst_eb)) { + ret = -EINVAL ; + goto out; + } + + level =btrfs_header_level (dst_eb); + dst_path =btrfs_alloc_path (); +if (!dst_path) { + ret = -ENOMEM ; + goto out; + } +/* For dst_path */ +extent_buffer_get (dst_eb); + dst_path->nodes[level] = dst_eb; + dst_path->slots[level] =0 ; + dst_path->locks[level] =0 ; + +/* Do the generation aware breadth-first search */ + ret =qgroup_trace_new_subtree_blocks (trans, src_eb, dst_path, level, + level, last_snapshot); +if (ret <0 ) + goto out; + ret =0 ; + +out: +free_extent_buffer (src_eb); +free_extent_buffer (dst_eb); +btrfs_free_path (dst_path); +if (ret <0 ) + fs_info->qgroup_flags |=BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT ; +return ret; +} +int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level)
fs/btrfs/qgroup.h +10 -0
@@ -236,6 +236,16 @@ int btrfs_qgroup_trace_leaf_items(struct btrfs_trans_handle *trans,int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level); + +/* +* Inform qgroup to trace subtree swap used in balance. +* Unlike btrfs_qgroup_trace_subtree(), this function will only trace +* new tree blocks whose generation is equal to (or larger than) @last_snapshot. +*/ +int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct extent_buffer *src_parent,int src_slot, +struct extent_buffer *dst_parent,int dst_slot, +u64 last_snapshot);int btrfs_qgroup_account_extent (struct btrfs_trans_handle *trans,u64 bytenr,u64 num_bytes,struct ulist *old_roots,struct ulist *new_roots);
fs/btrfs/relocation.c +3 -8
@@ -1879,14 +1879,9 @@ int replace_path(struct btrfs_trans_handle *trans,* and tree block numbers, if current trans doesn't free * data reloc tree inode. */ - ret =btrfs_qgroup_trace_subtree (trans, parent, -btrfs_header_generation (parent), -btrfs_header_level (parent)); -if (ret <0 ) -break ; - ret =btrfs_qgroup_trace_subtree (trans, path->nodes[level], -btrfs_header_generation (path->nodes[level]), -btrfs_header_level (path->nodes[level])); + ret =btrfs_qgroup_trace_subtree_swap (trans, parent, slot, + path->nodes[level], path->slots[level], + last_snapshot);if (ret <0 )break ;
Signature · 1 line
2.18.0
Re: [PATCH v3 4/7] btrfs: qgroup: Use generation aware subtree swap to mark dirty extents
Quoted 89 lines · Qu Wenruo
Before this patch, for quota enabled balance, btrfs needs to mark the whole subtree dirty for quota.
E.g.
OO = Old tree blocks (from file tree)
NN = New tree blocks (from reloc tree)File tree (src) Reloc tree (dst)
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO (d) OO OO OO NN (d)For old balance + quota case, quota will mark the whole src and dst tree dirty, including all the 3 old tree blocks in reloc tree.
It's doable for small file tree or new tree blocks are all located at lower level.
But for large file tree or new tree blocks are all located at higher level, this will lead to mark the whole tree dirty, and be unbelievably slow.
This patch will change how we handle such balance with quota enabled case.
Now we will search from (b) and (c) for any new tree blocks whose generation is equal to @last_snapshot, and only mark them dirty.
In above case, we only need to trace tree blocks NN(b), NN(c) and NN(d). (NN(a) will be traced when CoW happens for nodeptr modification). And also for tree blocks OO(b), OO(c), OO(d). (OO(a) will be traced when CoW happens for nodeptr modification)
For above case, we could skip 3 tree blocks, but for larger tree, we can skip tons of unmodified tree blocks, and hugely speed up balance.
This patch will introduce a new function,
btrfs_qgroup_trace_subtree_swap(), which will do the following main work:1) Read out real root eb
And setup basicdst_pathfor later calls
2) Callqgroup_trace_new_subtree_blocks()
To trace all new tree blocks in reloc tree and their counter parts in file tree.Signed-off-by Qu Wenruo <[email protected]>--- fs/btrfs/qgroup.c | 94 +++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/qgroup.h | 10 +++++ fs/btrfs/relocation.c | 11 ++--- 3 files changed, 107 insertions(+), 8 deletions(-)fs/btrfs/qgroup.c +26
-0@@ -1953,6 +1953,100 @@ static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,return ret; } +/* +* For balance subtree swap. +* +* Will go down the tree block pointed by @dst_eb (pointed by @dst_parent and +* @dst_slot), and find any tree blocks whose generation is at @last_snapshot, +* and then go down @src_eb (pointed by @src_parent and @src_slot) to find +* the conterpart of the tree block, then mark both tree blocks as qgroup dirty, +* and skip all tree blocks whose generation is smaller than last_snapshot. +* +* This would skip tons of tree blocks of original btrfs_qgroup_trace_subtree(), +* which is the culprit of super slow balance if the file tree is large. +* +* @src_parent, @src_slot: pointer to src (file tree) eb. +* @dst_parent, @dst_slot: pointer to dst (tree reloc tree) eb. +*/ +int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct extent_buffer *src_parent,int src_slot, +struct extent_buffer *dst_parent,int dst_slot, +u64 last_snapshot) +{ +struct btrfs_fs_info *fs_info = trans->fs_info; +struct btrfs_path *dst_path =NULL ; +struct btrfs_key first_key; +struct extent_buffer *src_eb =NULL ; +struct extent_buffer *dst_eb =NULL ; +u64 child_gen;
fs/btrfs/qgroup.c static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans, · line 1991
Quoted 10 lines
fs/btrfs/qgroup.c +10
-0+u64 child_bytenr; +int level; +int ret; + +if (!test_bit (BTRFS_FS_QUOTA_ENABLED , &fs_info->flags)) +return 0 ; + +/* Wrong parameter order */ +BUG_ON (btrfs_node_ptr_generation (src_parent, src_slot) > +btrfs_node_ptr_generation (dst_parent, dst_slot));
If this is to catch errors development-time errors, then an ASSERT is probably better, but it looks like this needs to be an ordinary runtime sanity check too.
Quoted 69 lines
fs/btrfs/qgroup.c +58
-0+ +/* Read out real @src_eb, pointed by @src_parent and @src_slot */ + child_bytenr =btrfs_node_blockptr (src_parent, src_slot); + child_gen =btrfs_node_ptr_generation (src_parent, src_slot); +btrfs_node_key_to_cpu (src_parent, &first_key, src_slot); + + src_eb =read_tree_block (fs_info, child_bytenr, child_gen, +btrfs_header_level (src_parent) -1 , &first_key); +if (IS_ERR (src_eb)) { + ret =PTR_ERR (src_eb); + goto out; + } + +/* Read out real @dst_eb, pointed by @src_parent and @src_slot */ + child_bytenr =btrfs_node_blockptr (dst_parent, dst_slot); + child_gen =btrfs_node_ptr_generation (dst_parent, dst_slot); +btrfs_node_key_to_cpu (dst_parent, &first_key, dst_slot); + + dst_eb =read_tree_block (fs_info, child_bytenr, child_gen, +btrfs_header_level (dst_parent) -1 , &first_key); +if (IS_ERR (dst_eb)) { + ret =PTR_ERR (dst_eb); + goto out; + } + +if (!extent_buffer_uptodate (src_eb) || !extent_buffer_uptodate (dst_eb)) { + ret = -EINVAL ; + goto out; + } + + level =btrfs_header_level (dst_eb); + dst_path =btrfs_alloc_path (); +if (!dst_path) { + ret = -ENOMEM ; + goto out; + } +/* For dst_path */ +extent_buffer_get (dst_eb); + dst_path->nodes[level] = dst_eb; + dst_path->slots[level] =0 ; + dst_path->locks[level] =0 ; + +/* Do the generation aware breadth-first search */ + ret =qgroup_trace_new_subtree_blocks (trans, src_eb, dst_path, level, + level, last_snapshot); +if (ret <0 ) + goto out; + ret =0 ; + +out: +free_extent_buffer (src_eb); +free_extent_buffer (dst_eb); +btrfs_free_path (dst_path); +if (ret <0 ) + fs_info->qgroup_flags |=BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT ; +return ret; +} +int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level)fs/btrfs/qgroup.h +0
-0@@ -236,6 +236,16 @@ int btrfs_qgroup_trace_leaf_items(struct btrfs_trans_handle *trans,int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level);
fs/btrfs/qgroup.h int btrfs_qgroup_trace_leaf_items(struct btrfs_trans_handle *trans, · line 248
Quoted 10 lines
fs/btrfs/qgroup.h +10
-0+ +/* +* Inform qgroup to trace subtree swap used in balance. +* Unlike btrfs_qgroup_trace_subtree(), this function will only trace +* new tree blocks whose generation is equal to (or larger than) @last_snapshot. +*/ +int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct extent_buffer *src_parent,int src_slot, +struct extent_buffer *dst_parent,int dst_slot, +u64 last_snapshot);
I've noticed that qgroup.h contains the function comments, but it's preferred to have them in the .c file, next to the code. Please move it and feel free to send patch moving the rest.
Quoted 27 lines
fs/btrfs/qgroup.h +0
-0int btrfs_qgroup_account_extent (struct btrfs_trans_handle *trans,u64 bytenr,u64 num_bytes,struct ulist *old_roots,struct ulist *new_roots);fs/btrfs/relocation.c +3
-8@@ -1879,14 +1879,9 @@ int replace_path(struct btrfs_trans_handle *trans,* and tree block numbers, if current trans doesn't free * data reloc tree inode. */ - ret =btrfs_qgroup_trace_subtree (trans, parent, -btrfs_header_generation (parent), -btrfs_header_level (parent)); -if (ret <0 ) -break ; - ret =btrfs_qgroup_trace_subtree (trans, path->nodes[level], -btrfs_header_generation (path->nodes[level]), -btrfs_header_level (path->nodes[level])); + ret =btrfs_qgroup_trace_subtree_swap (trans, parent, slot, + path->nodes[level], path->slots[level], + last_snapshot);if (ret <0 )break ;Signature · 1 line
2.18.0
Re: [PATCH v3 4/7] btrfs: qgroup: Use generation aware subtree swap to mark dirty extents
Quoted 96 lines · David Sterba
Quoted 95 lines · Qu Wenruo
Before this patch, for quota enabled balance, btrfs needs to mark the whole subtree dirty for quota.
E.g.
OO = Old tree blocks (from file tree)
NN = New tree blocks (from reloc tree)File tree (src) Reloc tree (dst)
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO (d) OO OO OO NN (d)For old balance + quota case, quota will mark the whole src and dst tree dirty, including all the 3 old tree blocks in reloc tree.
It's doable for small file tree or new tree blocks are all located at lower level.
But for large file tree or new tree blocks are all located at higher level, this will lead to mark the whole tree dirty, and be unbelievably slow.
This patch will change how we handle such balance with quota enabled case.
Now we will search from (b) and (c) for any new tree blocks whose generation is equal to @last_snapshot, and only mark them dirty.
In above case, we only need to trace tree blocks NN(b), NN(c) and NN(d). (NN(a) will be traced when CoW happens for nodeptr modification). And also for tree blocks OO(b), OO(c), OO(d). (OO(a) will be traced when CoW happens for nodeptr modification)
For above case, we could skip 3 tree blocks, but for larger tree, we can skip tons of unmodified tree blocks, and hugely speed up balance.
This patch will introduce a new function,
btrfs_qgroup_trace_subtree_swap(), which will do the following main work:1) Read out real root eb
And setup basicdst_pathfor later calls
2) Callqgroup_trace_new_subtree_blocks()
To trace all new tree blocks in reloc tree and their counter parts in file tree.Signed-off-by Qu Wenruo <[email protected]>--- fs/btrfs/qgroup.c | 94 +++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/qgroup.h | 10 +++++ fs/btrfs/relocation.c | 11 ++--- 3 files changed, 107 insertions(+), 8 deletions(-)fs/btrfs/qgroup.c +32
-0@@ -1953,6 +1953,100 @@ static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,return ret; } +/* +* For balance subtree swap. +* +* Will go down the tree block pointed by @dst_eb (pointed by @dst_parent and +* @dst_slot), and find any tree blocks whose generation is at @last_snapshot, +* and then go down @src_eb (pointed by @src_parent and @src_slot) to find +* the conterpart of the tree block, then mark both tree blocks as qgroup dirty, +* and skip all tree blocks whose generation is smaller than last_snapshot. +* +* This would skip tons of tree blocks of original btrfs_qgroup_trace_subtree(), +* which is the culprit of super slow balance if the file tree is large. +* +* @src_parent, @src_slot: pointer to src (file tree) eb. +* @dst_parent, @dst_slot: pointer to dst (tree reloc tree) eb. +*/ +int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct extent_buffer *src_parent,int src_slot, +struct extent_buffer *dst_parent,int dst_slot, +u64 last_snapshot) +{ +struct btrfs_fs_info *fs_info = trans->fs_info; +struct btrfs_path *dst_path =NULL ; +struct btrfs_key first_key; +struct extent_buffer *src_eb =NULL ; +struct extent_buffer *dst_eb =NULL ; +u64 child_gen; +u64 child_bytenr; +int level; +int ret; + +if (!test_bit (BTRFS_FS_QUOTA_ENABLED , &fs_info->flags)) +return 0 ;
Quoted 8 lines
fs/btrfs/qgroup.c static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans, · line 1991
Quoted 4 lines
fs/btrfs/qgroup.c +4
-0+ +/* Wrong parameter order */ +BUG_ON (btrfs_node_ptr_generation (src_parent, src_slot) > +btrfs_node_ptr_generation (dst_parent, dst_slot));If this is to catch errors development-time errors, then an ASSERT is probably better, but it looks like this needs to be an ordinary runtime sanity check too.
For runtime check, it's already done before entering real relocation code.
Relocation will check tree generation before really doing the swap.
So it is a development time error.
Quoted 76 lines
Quoted 76 lines
fs/btrfs/qgroup.c +58
-0+ +/* Read out real @src_eb, pointed by @src_parent and @src_slot */ + child_bytenr =btrfs_node_blockptr (src_parent, src_slot); + child_gen =btrfs_node_ptr_generation (src_parent, src_slot); +btrfs_node_key_to_cpu (src_parent, &first_key, src_slot); + + src_eb =read_tree_block (fs_info, child_bytenr, child_gen, +btrfs_header_level (src_parent) -1 , &first_key); +if (IS_ERR (src_eb)) { + ret =PTR_ERR (src_eb); + goto out; + } + +/* Read out real @dst_eb, pointed by @src_parent and @src_slot */ + child_bytenr =btrfs_node_blockptr (dst_parent, dst_slot); + child_gen =btrfs_node_ptr_generation (dst_parent, dst_slot); +btrfs_node_key_to_cpu (dst_parent, &first_key, dst_slot); + + dst_eb =read_tree_block (fs_info, child_bytenr, child_gen, +btrfs_header_level (dst_parent) -1 , &first_key); +if (IS_ERR (dst_eb)) { + ret =PTR_ERR (dst_eb); + goto out; + } + +if (!extent_buffer_uptodate (src_eb) || !extent_buffer_uptodate (dst_eb)) { + ret = -EINVAL ; + goto out; + } + + level =btrfs_header_level (dst_eb); + dst_path =btrfs_alloc_path (); +if (!dst_path) { + ret = -ENOMEM ; + goto out; + } +/* For dst_path */ +extent_buffer_get (dst_eb); + dst_path->nodes[level] = dst_eb; + dst_path->slots[level] =0 ; + dst_path->locks[level] =0 ; + +/* Do the generation aware breadth-first search */ + ret =qgroup_trace_new_subtree_blocks (trans, src_eb, dst_path, level, + level, last_snapshot); +if (ret <0 ) + goto out; + ret =0 ; + +out: +free_extent_buffer (src_eb); +free_extent_buffer (dst_eb); +btrfs_free_path (dst_path); +if (ret <0 ) + fs_info->qgroup_flags |=BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT ; +return ret; +} +int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level)fs/btrfs/qgroup.h +6
-0@@ -236,6 +236,16 @@ int btrfs_qgroup_trace_leaf_items(struct btrfs_trans_handle *trans,int btrfs_qgroup_trace_subtree (struct btrfs_trans_handle *trans,struct extent_buffer *root_eb,u64 root_gen,int root_level); + +/* +* Inform qgroup to trace subtree swap used in balance. +* Unlike btrfs_qgroup_trace_subtree(), this function will only trace +* new tree blocks whose generation is equal to (or larger than) @last_snapshot. +*/
Quoted 8 lines
fs/btrfs/qgroup.h int btrfs_qgroup_trace_leaf_items(struct btrfs_trans_handle *trans, · line 248
Quoted 4 lines
fs/btrfs/qgroup.h +4
-0+int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct extent_buffer *src_parent,int src_slot, +struct extent_buffer *dst_parent,int dst_slot, +u64 last_snapshot);I've noticed that
qgroup.hcontains the function comments, but it's preferred to have them in the .c file, next to the code. Please move it and feel free to send patch moving the rest.
A new code style learned.
Will update the patchset to reflect this comment.
Thanks,
Qu
Quoted 28 lines
Quoted 28 lines
fs/btrfs/qgroup.h +0
-0int btrfs_qgroup_account_extent (struct btrfs_trans_handle *trans,u64 bytenr,u64 num_bytes,struct ulist *old_roots,struct ulist *new_roots);fs/btrfs/relocation.c +3
-8@@ -1879,14 +1879,9 @@ int replace_path(struct btrfs_trans_handle *trans,* and tree block numbers, if current trans doesn't free * data reloc tree inode. */ - ret =btrfs_qgroup_trace_subtree (trans, parent, -btrfs_header_generation (parent), -btrfs_header_level (parent)); -if (ret <0 ) -break ; - ret =btrfs_qgroup_trace_subtree (trans, path->nodes[level], -btrfs_header_generation (path->nodes[level]), -btrfs_header_level (path->nodes[level])); + ret =btrfs_qgroup_trace_subtree_swap (trans, parent, slot, + path->nodes[level], path->slots[level], + last_snapshot);if (ret <0 )break ;Signature · 1 line
2.18.0
PATCH v3 5/7 btrfs: qgroup: Don't trace subtree if we're dropping reloc tree
In reply to Qu WenruoReloc tree doesn't contribute to qgroup numbers, as we have accounted them at balance time (check replace_path()).
Skip such unneeded subtree trace should reduce some performance overhead.
--- fs/btrfs/extent-tree.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
fs/btrfs/extent-tree.c +7 -1
@@ -8643,7 +8643,13 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans, parent =0 ; } -if (need_account) { +/* +* Tree reloc tree doesn't contribute to qgroup numbers, and +* we have already accounted them at merge time (replace_path), +* thus we could skip expensive subtree trace here. +*/ +if (root->root_key.objectid !=BTRFS_TREE_RELOC_OBJECTID && + need_account) { ret =btrfs_qgroup_trace_subtree (trans, next, generation, level -1 );if (ret) {
Signature · 1 line
2.18.0
Re: [PATCH v3 5/7] btrfs: qgroup: Don't trace subtree if we're dropping reloc tree
Quoted 16 lines · Qu Wenruo
Reloc tree doesn't contribute to qgroup numbers, as we have accounted them at balance time (check
replace_path()).Skip such unneeded subtree trace should reduce some performance overhead.
Signed-off-by Qu Wenruo <[email protected]>--- fs/btrfs/extent-tree.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)fs/btrfs/extent-tree.c +0
-0
fs/btrfs/extent-tree.c static noinline int do_walk_down(struct btrfs_trans_handle *trans, · line 8647
Quoted 6 lines
fs/btrfs/extent-tree.c +2
-1@@ -8643,7 +8643,13 @@ static noinline int do_walk_down(struct btrfs_trans_handle *trans, parent =0 ; } -if (need_account) { +/* +* Tree reloc tree doesn't contribute to qgroup numbers, and
As you're going to send another iteration, please update the 'tree reloc tree' references here and in other patches too.
Quoted 10 lines
fs/btrfs/extent-tree.c +5
-0+* we have already accounted them at merge time (replace_path), +* thus we could skip expensive subtree trace here. +*/ +if (root->root_key.objectid !=BTRFS_TREE_RELOC_OBJECTID && + need_account) { ret =btrfs_qgroup_trace_subtree (trans, next, generation, level -1 );if (ret) {Signature · 1 line
2.18.0
PATCH v3 6/7 btrfs: delayed-ref: Introduce new parameter for btrfs_add_delayed_tree_ref() to reduce unnecessary qgroup tracing
In reply to Qu WenruoFor btrfs_add_delayed_tree_ref(), its ref_root parameter can be different from its real root.
This is pretty common for reloc tree, in that case @ref_root is passed as the original tree owner (source file tree).
However btrfs_add_delayed_tree_ref() uses @ref_root to determine whether we should do heavy qgroup tracing for it, so for balance this could cause a lot of unnecessary extent tracing.
This patch will introduce a parameter, @root for qgroup code to determine whether we really need to do the heavy-lifting tracing work.
This patch would reduce the qgroup dirty extent number from 'number of extents being relocated' to 0 for the transaction before real tree swap.
--- fs/btrfs/delayed-ref.c | 5 +++-- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 17 ++++++++++------- 3 files changed, 14 insertions(+), 9 deletions(-)
fs/btrfs/delayed-ref.c +3 -2
@@ -710,8 +710,9 @@ static void init_delayed_ref_common(struct btrfs_fs_info *fs_info,* transaction commits. */ int btrfs_add_delayed_tree_ref (struct btrfs_trans_handle *trans, +struct btrfs_root *root,u64 bytenr,u64 num_bytes,u64 parent, -u64 ref_root,int level,int action, +u64 ref_root,int level,int action,struct btrfs_delayed_extent_op *extent_op,int *old_ref_mod,int *new_ref_mod) {
@@ -737,7 +738,7 @@ int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, }if (test_bit (BTRFS_FS_QUOTA_ENABLED , &fs_info->flags) && -is_fstree (ref_root)) { +is_fstree (root->root_key.objectid)) { record =kmalloc (sizeof (*record),GFP_NOFS );if (!record) {kmem_cache_free (btrfs_delayed_tree_ref_cachep, ref);
fs/btrfs/delayed-ref.h +1 -0
@@ -235,6 +235,7 @@ static inline void btrfs_put_delayed_ref_head(struct btrfs_delayed_ref_head *hea } int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root, int level, int action, struct btrfs_delayed_extent_op *extent_op,
fs/btrfs/extent-tree.c +10 -7
@@ -2040,9 +2040,10 @@ int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans, owner, offset, BTRFS_ADD_DELAYED_REF);if (owner <BTRFS_FIRST_FREE_OBJECTID ) { - ret =btrfs_add_delayed_tree_ref (trans, bytenr, + ret =btrfs_add_delayed_tree_ref (trans, root, bytenr, num_bytes, parent, - root_objectid, (int )owner, + root_objectid, + (int )owner,BTRFS_ADD_DELAYED_REF ,NULL , &old_ref_mod, &new_ref_mod); }else {
@@ -6993,7 +6994,7 @@ void btrfs_free_tree_block(struct btrfs_trans_handle *trans, root->root_key.objectid,btrfs_header_level (buf),0 , BTRFS_DROP_DELAYED_REF); - ret = btrfs_add_delayed_tree_ref(trans, buf->start, + ret = btrfs_add_delayed_tree_ref(trans, root, buf->start, buf->len, parent, root->root_key.objectid, btrfs_header_level(buf),
@@ -7072,9 +7073,10 @@ int btrfs_free_extent(struct btrfs_trans_handle *trans, old_ref_mod = new_ref_mod =0 ; ret =0 ; }else if (owner <BTRFS_FIRST_FREE_OBJECTID ) { - ret =btrfs_add_delayed_tree_ref (trans, bytenr, + ret =btrfs_add_delayed_tree_ref (trans, root, bytenr, num_bytes, parent, - root_objectid, (int )owner, + root_objectid, + (int )owner,BTRFS_DROP_DELAYED_REF ,NULL , &old_ref_mod, &new_ref_mod); }else {
@@ -8293,9 +8295,10 @@ struct extent_buffer *btrfs_alloc_tree_block(struct btrfs_trans_handle *trans,btrfs_ref_tree_mod (root, ins.objectid, ins.offset, parent, root_objectid, level,0 ,BTRFS_ADD_DELAYED_EXTENT ); - ret =btrfs_add_delayed_tree_ref (trans, ins.objectid, + ret =btrfs_add_delayed_tree_ref (trans, root, ins.objectid, ins.offset, parent, - root_objectid, level, + root_objectid, + level,BTRFS_ADD_DELAYED_EXTENT , extent_op,NULL ,NULL );if (ret)
Signature · 1 line
2.18.0
Re: [PATCH v3 6/7] btrfs: delayed-ref: Introduce new parameter for btrfs_add_delayed_tree_ref() to reduce unnecessary qgroup tracing
Quoted 27 lines · Qu Wenruo
For
btrfs_add_delayed_tree_ref(), itsref_rootparameter can be different from its real root.
This is pretty common for reloc tree, in that case @ref_root is passed as the original tree owner (source file tree).However
btrfs_add_delayed_tree_ref()uses @ref_root to determine whether we should do heavy qgroup tracing for it, so for balance this could cause a lot of unnecessary extent tracing.This patch will introduce a parameter, @root for qgroup code to determine whether we really need to do the heavy-lifting tracing work.
This patch would reduce the qgroup dirty extent number from 'number of extents being relocated' to 0 for the transaction before real tree swap.
Signed-off-by Qu Wenruo <[email protected]>--- fs/btrfs/delayed-ref.c | 5 +++-- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 17 ++++++++++------- 3 files changed, 14 insertions(+), 9 deletions(-)fs/btrfs/delayed-ref.c +0
-0
fs/btrfs/delayed-ref.c static void init_delayed_ref_common(struct btrfs_fs_info *fs_info, · line 715
Quoted 7 lines
fs/btrfs/delayed-ref.c +2
-1@@ -710,8 +710,9 @@ static void init_delayed_ref_common(struct btrfs_fs_info *fs_info,* transaction commits. */ int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 parent, - u64 ref_root, int level, int action, + u64 ref_root, int level, int action,
Unrelated change
Quoted 29 lines
fs/btrfs/delayed-ref.c +1
-1struct btrfs_delayed_extent_op *extent_op, int *old_ref_mod, int *new_ref_mod) {@@ -737,7 +738,7 @@ int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, }if (test_bit (BTRFS_FS_QUOTA_ENABLED , &fs_info->flags) && -is_fstree (ref_root)) { +is_fstree (root->root_key.objectid)) { record =kmalloc (sizeof (*record),GFP_NOFS );if (!record) {kmem_cache_free (btrfs_delayed_tree_ref_cachep, ref);fs/btrfs/delayed-ref.h +1
-0@@ -235,6 +235,7 @@ static inline void btrfs_put_delayed_ref_head(struct btrfs_delayed_ref_head *hea } int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root, int level, int action, struct btrfs_delayed_extent_op *extent_op,fs/btrfs/extent-tree.c +0
-0
fs/btrfs/extent-tree.c int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans, · line 2046
Quoted 9 lines
fs/btrfs/extent-tree.c +3
-2@@ -2040,9 +2040,10 @@ int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans, owner, offset, BTRFS_ADD_DELAYED_REF);if (owner <BTRFS_FIRST_FREE_OBJECTID ) { - ret = btrfs_add_delayed_tree_ref(trans, bytenr, + ret = btrfs_add_delayed_tree_ref(trans, root, bytenr, num_bytes, parent, - root_objectid, (int)owner, + root_objectid, + (int)owner,
Here as well and a few more below. The (int) typecast is actually a bug as it trims the owner to just 32bits, so if you want to update the formatting, please send a separate patch.
Quoted 40 lines
fs/btrfs/extent-tree.c +7
-5BTRFS_ADD_DELAYED_REF ,NULL , &old_ref_mod, &new_ref_mod); }else {@@ -6993,7 +6994,7 @@ void btrfs_free_tree_block(struct btrfs_trans_handle *trans, root->root_key.objectid,btrfs_header_level (buf),0 , BTRFS_DROP_DELAYED_REF); - ret = btrfs_add_delayed_tree_ref(trans, buf->start, + ret = btrfs_add_delayed_tree_ref(trans, root, buf->start, buf->len, parent, root->root_key.objectid, btrfs_header_level(buf),@@ -7072,9 +7073,10 @@ int btrfs_free_extent(struct btrfs_trans_handle *trans, old_ref_mod = new_ref_mod =0 ; ret =0 ; }else if (owner <BTRFS_FIRST_FREE_OBJECTID ) { - ret =btrfs_add_delayed_tree_ref (trans, bytenr, + ret =btrfs_add_delayed_tree_ref (trans, root, bytenr, num_bytes, parent, - root_objectid, (int )owner, + root_objectid, + (int )owner,BTRFS_DROP_DELAYED_REF ,NULL , &old_ref_mod, &new_ref_mod); }else {@@ -8293,9 +8295,10 @@ struct extent_buffer *btrfs_alloc_tree_block(struct btrfs_trans_handle *trans,btrfs_ref_tree_mod (root, ins.objectid, ins.offset, parent, root_objectid, level,0 ,BTRFS_ADD_DELAYED_EXTENT ); - ret =btrfs_add_delayed_tree_ref (trans, ins.objectid, + ret =btrfs_add_delayed_tree_ref (trans, root, ins.objectid, ins.offset, parent, - root_objectid, level, + root_objectid, + level,BTRFS_ADD_DELAYED_EXTENT , extent_op,NULL ,NULL );if (ret)Signature · 1 line
2.18.0
Re: [PATCH v3 6/7] btrfs: delayed-ref: Introduce new parameter for btrfs_add_delayed_tree_ref() to reduce unnecessary qgroup tracing
Quoted 23 lines · David Sterba
Quoted 22 lines · Qu Wenruo
For
btrfs_add_delayed_tree_ref(), itsref_rootparameter can be different from its real root.
This is pretty common for reloc tree, in that case @ref_root is passed as the original tree owner (source file tree).However
btrfs_add_delayed_tree_ref()uses @ref_root to determine whether we should do heavy qgroup tracing for it, so for balance this could cause a lot of unnecessary extent tracing.This patch will introduce a parameter, @root for qgroup code to determine whether we really need to do the heavy-lifting tracing work.
This patch would reduce the qgroup dirty extent number from 'number of extents being relocated' to 0 for the transaction before real tree swap.
Signed-off-by Qu Wenruo <[email protected]>--- fs/btrfs/delayed-ref.c | 5 +++-- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 17 ++++++++++------- 3 files changed, 14 insertions(+), 9 deletions(-)
Quoted 14 lines
fs/btrfs/delayed-ref.c static void init_delayed_ref_common(struct btrfs_fs_info *fs_info, · line 715
Quoted 12 lines
fs/btrfs/delayed-ref.c +2
-1@@ -710,8 +710,9 @@ static void init_delayed_ref_common(struct btrfs_fs_info *fs_info,* transaction commits. */ int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 parent, - u64 ref_root, int level, int action, + u64 ref_root, int level, int action,Unrelated change
Will avoid it in next update.
Quoted 32 lines
Quoted 32 lines
fs/btrfs/delayed-ref.c +1
-1struct btrfs_delayed_extent_op *extent_op, int *old_ref_mod, int *new_ref_mod) {@@ -737,7 +738,7 @@ int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, }if (test_bit (BTRFS_FS_QUOTA_ENABLED , &fs_info->flags) && -is_fstree (ref_root)) { +is_fstree (root->root_key.objectid)) { record =kmalloc (sizeof (*record),GFP_NOFS );if (!record) {kmem_cache_free (btrfs_delayed_tree_ref_cachep, ref);fs/btrfs/delayed-ref.h +1
-0@@ -235,6 +235,7 @@ static inline void btrfs_put_delayed_ref_head(struct btrfs_delayed_ref_head *hea } int btrfs_add_delayed_tree_ref(struct btrfs_trans_handle *trans, + struct btrfs_root *root, u64 bytenr, u64 num_bytes, u64 parent, u64 ref_root, int level, int action, struct btrfs_delayed_extent_op *extent_op,fs/btrfs/extent-tree.c +0
-0@@ -2040,9 +2040,10 @@ int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans, owner, offset, BTRFS_ADD_DELAYED_REF);
Quoted 11 lines
fs/btrfs/extent-tree.c int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans, · line 2046
Quoted 7 lines
fs/btrfs/extent-tree.c +3
-2if (owner <BTRFS_FIRST_FREE_OBJECTID ) { - ret = btrfs_add_delayed_tree_ref(trans, bytenr, + ret = btrfs_add_delayed_tree_ref(trans, root, bytenr, num_bytes, parent, - root_objectid, (int)owner, + root_objectid, + (int)owner,Here as well and a few more below. The (int) typecast is actually a bug as it trims the owner to just 32bits, so if you want to update the formatting, please send a separate patch.
Will avoid the unrelated change in next update.
But for the "bug" part, it's a mess.
Since owner is smaller than BTRFS_FIRST_FREE_OBJECTID, truncating to 32bits is in fact completely OK.
However the declaration of btrfs_add_delayed_tree_ref() says that parameter is in fact @level.
On the other hand, ref->level is passed to __btrfs_inc_extent_ref() as @onwer (and u64) again, so it's not causing problem (or we're already screwed up badly).
The naming and forced convert is really a mess here though.
I'll just keep that mess as is and don't touch it for the patchset.
Thanks,
Qu
Quoted 41 lines
Quoted 41 lines
fs/btrfs/extent-tree.c +7
-5BTRFS_ADD_DELAYED_REF ,NULL , &old_ref_mod, &new_ref_mod); }else {@@ -6993,7 +6994,7 @@ void btrfs_free_tree_block(struct btrfs_trans_handle *trans, root->root_key.objectid,btrfs_header_level (buf),0 , BTRFS_DROP_DELAYED_REF); - ret = btrfs_add_delayed_tree_ref(trans, buf->start, + ret = btrfs_add_delayed_tree_ref(trans, root, buf->start, buf->len, parent, root->root_key.objectid, btrfs_header_level(buf),@@ -7072,9 +7073,10 @@ int btrfs_free_extent(struct btrfs_trans_handle *trans, old_ref_mod = new_ref_mod =0 ; ret =0 ; }else if (owner <BTRFS_FIRST_FREE_OBJECTID ) { - ret =btrfs_add_delayed_tree_ref (trans, bytenr, + ret =btrfs_add_delayed_tree_ref (trans, root, bytenr, num_bytes, parent, - root_objectid, (int )owner, + root_objectid, + (int )owner,BTRFS_DROP_DELAYED_REF ,NULL , &old_ref_mod, &new_ref_mod); }else {@@ -8293,9 +8295,10 @@ struct extent_buffer *btrfs_alloc_tree_block(struct btrfs_trans_handle *trans,btrfs_ref_tree_mod (root, ins.objectid, ins.offset, parent, root_objectid, level,0 ,BTRFS_ADD_DELAYED_EXTENT ); - ret =btrfs_add_delayed_tree_ref (trans, ins.objectid, + ret =btrfs_add_delayed_tree_ref (trans, root, ins.objectid, ins.offset, parent, - root_objectid, level, + root_objectid, + level,BTRFS_ADD_DELAYED_EXTENT , extent_op,NULL ,NULL );if (ret)Signature · 1 line
2.18.0
PATCH v3 7/7 btrfs: qgroup: Only trace data extents in leaves if we're relocating data block group
In reply to Qu WenruoFor qgroup_trace_extent_swap(), if we find one leaf needs to be traced, btrfs will also iterate all file extents and trace them.
This is OK if we're relocating data block groups, but if we're relocating metadata block groups, balance code itself has ensured that both subtree of file tree and reloc tree contain the same contents.
That's to say, if we're relocating metadata block groups, all file extents in reloc and file tree should match, thus no need to trace them. This should reduce the total number of dirty extents processed in metadata block group balance.
--- fs/btrfs/qgroup.c | 21 +++++++++++++++------ fs/btrfs/qgroup.h | 1 + fs/btrfs/relocation.c | 10 +++++----- 3 files changed, 21 insertions(+), 11 deletions(-)
fs/btrfs/qgroup.c +15 -6
@@ -1725,7 +1725,8 @@ static int adjust_slots_upwards(struct btrfs_path *path, int root_level)static int qgroup_trace_extent_swap (struct btrfs_trans_handle * trans,struct extent_buffer *src_eb,struct btrfs_path *dst_path, -int dst_level,int root_level) +int dst_level,int root_level, +bool trace_leaf) {struct btrfs_key key;struct btrfs_path *src_path;
@@ -1828,7 +1829,7 @@ static int qgroup_trace_extent_swap(struct btrfs_trans_handle* trans, goto out;/* Record leaf file extents */ -if (dst_level ==0 ) { +if (dst_level ==0 && trace_leaf) { ret =btrfs_qgroup_trace_leaf_items (trans, src_path->nodes[0 ]);if (ret <0 ) goto out;
@@ -1865,7 +1866,7 @@ static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,struct extent_buffer *src_eb, struct btrfs_path *dst_path, int cur_level, int root_level, - u64 last_snapshot) + u64 last_snapshot, bool trace_leaf) { struct btrfs_fs_info *fs_info = trans->fs_info;struct extent_buffer *eb;
@@ -1916,7 +1917,7 @@ static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,/* Now record this tree block and its counter part for qgroups */ ret =qgroup_trace_extent_swap (trans, src_eb, dst_path, cur_level, - root_level); + root_level, trace_leaf);if (ret <0 ) goto cleanup;
@@ -1933,7 +1934,7 @@ static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,/* Recursive call (at most 7 times) */ ret =qgroup_trace_new_subtree_blocks (trans, src_eb, dst_path, cur_level -1 , root_level, - last_snapshot); + last_snapshot, trace_leaf);if (ret <0 ) goto cleanup; }
@@ -1969,6 +1970,7 @@ static int qgroup_trace_new_subtree_blocks(struct btrfs_trans_handle* trans,* @dst_parent, @dst_slot: pointer to dst (tree reloc tree) eb. */ int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct btrfs_block_group_cache *bg_cache,struct extent_buffer *src_parent,int src_slot,struct extent_buffer *dst_parent,int dst_slot,u64 last_snapshot)
@@ -1978,6 +1980,7 @@ int btrfs_qgroup_trace_subtree_swap(struct btrfs_trans_handle *trans,struct btrfs_key first_key;struct extent_buffer *src_eb =NULL ;struct extent_buffer *dst_eb =NULL ; +bool trace_leaf = false;u64 child_gen;u64 child_bytenr;int level;
@@ -1990,6 +1993,12 @@ int btrfs_qgroup_trace_subtree_swap(struct btrfs_trans_handle *trans,BUG_ON (btrfs_node_ptr_generation (src_parent, src_slot) >btrfs_node_ptr_generation (dst_parent, dst_slot)); +/* +* Only trace leaf if we're relocating data block groups, this could +* reduce tons of data extents tracing for meta/sys bg relocation. +*/ +if (bg_cache->flags &BTRFS_BLOCK_GROUP_DATA ) + trace_leaf = true;/* Read out real @src_eb, pointed by @src_parent and @src_slot */ child_bytenr =btrfs_node_blockptr (src_parent, src_slot); child_gen =btrfs_node_ptr_generation (src_parent, src_slot);
@@ -2033,7 +2042,7 @@ int btrfs_qgroup_trace_subtree_swap(struct btrfs_trans_handle *trans,/* Do the generation aware breadth-first search */ ret =qgroup_trace_new_subtree_blocks (trans, src_eb, dst_path, level, - level, last_snapshot); + level, last_snapshot, trace_leaf);if (ret <0 ) goto out; ret =0 ;
fs/btrfs/qgroup.h +1 -0
@@ -243,6 +243,7 @@ int btrfs_qgroup_trace_subtree(struct btrfs_trans_handle *trans,* new tree blocks whose generation is equal to (or larger than) @last_snapshot. */ int btrfs_qgroup_trace_subtree_swap (struct btrfs_trans_handle *trans, +struct btrfs_block_group_cache *bg_cache,struct extent_buffer *src_parent,int src_slot,struct extent_buffer *dst_parent,int dst_slot,u64 last_snapshot);
fs/btrfs/relocation.c +5 -5
@@ -1735,7 +1735,7 @@ int memcmp_node_keys(struct extent_buffer *eb, int slot,* errors, a negative error number is returned. */ static noinline_for_stack -int replace_path(struct btrfs_trans_handle *trans, +int replace_path(struct btrfs_trans_handle *trans, struct reloc_control *rc,struct btrfs_root *dest,struct btrfs_root *src,struct btrfs_path *path,struct btrfs_key *next_key,int lowest_level,int max_level)
@@ -1879,9 +1879,9 @@ int replace_path(struct btrfs_trans_handle *trans,* and tree block numbers, if current trans doesn't free * data reloc tree inode. */ - ret =btrfs_qgroup_trace_subtree_swap (trans, parent, slot, - path->nodes[level], path->slots[level], - last_snapshot); + ret =btrfs_qgroup_trace_subtree_swap (trans, rc->block_group, + parent, slot, path->nodes[level], + path->slots[level], last_snapshot);if (ret <0 )break ;
@@ -2200,7 +2200,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc, btrfs_comp_cpu_keys(&next_key, &key) >= 0) { ret = 0; } else { - ret =replace_path (trans, root, reloc_root, path, + ret =replace_path (trans, rc, root, reloc_root, path, &next_key, level, max_level); }if (ret <0 ) {
Signature · 1 line
2.18.0
Quoted 3 lines · Qu Wenruo
This patchset can be fetched from github:
https://github.com/adam900710/linux/tree/qgroup_balance_skip_trees
The base commit is v4.19-rc1 tag.
I want to merge this patchset to 4.20, it's been in for-next for some time and it addresses a problem that gets reported very often.
I'm still doing some tests, there are minor issues that are not blocking, more code review is always welcome.
Quoted 22 lines
There are a lot of reports of system hang for balance on quota enabled fs.
It's most obvious for large fs.The hang is caused by tons of unmodified extents marked as qgroup dirty. Such unmodified/unrelated sources include:
1) Unmodified subtree
2) Subtree drop for reloc tree
(BTW, other sources includes unmodified file extent items)E.g.
OO = Old tree blocks from file tree
NN = New tree blocks from reloc treefile tree reloc tree
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO OO OO OO NN
(d) (e) (f) (g) (d) (e) (f) (g)
Quoted 6 lines
In above case, balance will modify nodeptr in OO(a) to point NN(b) and NN(c), and modify NN(a) to point to OO(B) and OO(c).
Before this patch, quota will mark the whole subtree from its parent down to the leaves as dirty.
So btrfs quota need to trace all tree block from (a) to (g).
I find the use of 'trace' a bit confusing as there are the trace events, but as it's already used in the qgroup code I think it can stay as is.
Quoted 9 lines
However tree blocks (d) (e) (f) are shared between both trees, thus there is no need to trace those 3 tree blocks.
This patchset will change how this work by only tracing modified tree blocks in reloc tree, and their counter parts in file tree.
With this patch, we could skip tree blocks OO(d)~OO(f) in above example, thus reduce some some overhead caused by qgroup.
Quoted 7 lines
The improvement is mostly related to metadata relocation.
Also, for metadata relocation, we don't really need to trace data extents as they're not modified at all.
[[Benchmark]]
[...]
Thanks for the benchmarks, it would be good to add the information to the patch that's bringing the performance improvement.
Quoted 87 lines
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.Mkfs parameter:
--nodesize 4K (To bump up tree size)Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)Snapshots:
16 snapshots of the original subvolume. each snapshot has 3 random files modified.balance parameter:
-mSo the content should be pretty similar to a real world root fs layout.
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22874 | 22856 | +0.1% qgroup dirty extents | 225251 | 140431 | -37.7% time (sys) | 40.161s | 20.574s | -48.7% time (real) | 42.163s | 25.173s | -40.3%*: (
val_new-val_old) /val_old* 100%And the difference is becoming more and more obvious if more snapshots are created.
If we increase the number of snapshots to 64 (4 times the number of references, and 64 snapshots is already not recommended to use with quota)
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22462 | 22467 | +0.0% qgroup dirty extents | 314380 | 140826 | -55.2% time (sys) | 158.033s | 74.292s | -53.0% time (real) | 197.395s | 90.529s | -67.6%For larger fs the saving should be even more obvious.
Changelog:
v2:
Rename "tree reloc tree" to "reloc tree".
Add patch "Don't trace subtree if we're dropping reloc tree" into the patchset.
Fix wrongbtrfs_bin_search()call, which leads to unexpected ENOENT error forbtrfs_qgroup_trace_extent_swap(). Now use dst_path->slots[] directly.v3:
Add new patch to avoid unnecessary data extents trace for metadata relocation.
Better delayed ref time root owner detection to avoid unnecessary tree block tracing.
Add benchmark result for the patchset.Qu Wenruo (7):
btrfs: qgroup: Introduce trace event to analyse the number of dirty
extents accounted
btrfs: qgroup: Introduce function to trace two swaped extents
btrfs: qgroup: Introduce function to find all new tree blocks of reloc
tree
btrfs: qgroup: Use generation aware subtree swap to mark dirty extents
btrfs: qgroup: Don't trace subtree if we're dropping reloc tree
btrfs: delayed-ref: Introduce new parameter for
btrfs_add_delayed_tree_ref()to reduce unnecessary qgroup tracing
btrfs: qgroup: Only trace data extents in leaves if we're relocating
data block groupfs/btrfs/delayed-ref.c | 5 +- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 25 ++- fs/btrfs/qgroup.c | 347 +++++++++++++++++++++++++++++++++++ fs/btrfs/qgroup.h | 11 ++ fs/btrfs/relocation.c | 15 +- include/trace/events/btrfs.h | 21 +++ 7 files changed, 405 insertions(+), 20 deletions(-)Signature · 1 line
2.18.0
Quoted 36 lines · David Sterba
Quoted 3 lines · Qu Wenruo
This patchset can be fetched from github:
https://github.com/adam900710/linux/tree/qgroup_balance_skip_trees
The base commit is v4.19-rc1 tag.I want to merge this patchset to 4.20, it's been in for-next for some time and it addresses a problem that gets reported very often.
I'm still doing some tests, there are minor issues that are not blocking, more code review is always welcome.
Quoted 25 lines
There are a lot of reports of system hang for balance on quota enabled fs.
It's most obvious for large fs.The hang is caused by tons of unmodified extents marked as qgroup dirty. Such unmodified/unrelated sources include:
1) Unmodified subtree
2) Subtree drop for reloc tree
(BTW, other sources includes unmodified file extent items)E.g.
OO = Old tree blocks from file tree
NN = New tree blocks from reloc treefile tree reloc tree
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO OO OO OO NN
(d) (e) (f) (g) (d) (e) (f) (g)In above case, balance will modify nodeptr in OO(a) to point NN(b) and NN(c), and modify NN(a) to point to OO(B) and OO(c).
Quoted 6 lines
Quoted 3 lines
Before this patch, quota will mark the whole subtree from its parent down to the leaves as dirty.
So btrfs quota need to trace all tree block from (a) to (g).I find the use of 'trace' a bit confusing as there are the trace events, but as it's already used in the qgroup code I think it can stay as is.
I'm pretty open to rename the word "trace".
Any recommendation for a newer name?
Quoted 16 lines
Quoted 16 lines
However tree blocks (d) (e) (f) are shared between both trees, thus there is no need to trace those 3 tree blocks.
This patchset will change how this work by only tracing modified tree blocks in reloc tree, and their counter parts in file tree.
With this patch, we could skip tree blocks OO(d)~OO(f) in above example, thus reduce some some overhead caused by qgroup.
The improvement is mostly related to metadata relocation.
Also, for metadata relocation, we don't really need to trace data extents as they're not modified at all.
Quoted 5 lines
Quoted 1 line
[[Benchmark]]
[...]
Thanks for the benchmarks, it would be good to add the information to the patch that's bringing the performance improvement.
Could do that.
However the current improved (from around 10 * nr_relocated to 6~7 * nr_relocated) is the final result of the last 4 patches.
I'm not pretty sure if any single patch could bring obvious improvement.
Quoted 88 lines
Quoted 88 lines
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.Mkfs parameter:
--nodesize 4K (To bump up tree size)Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)Snapshots:
16 snapshots of the original subvolume. each snapshot has 3 random files modified.balance parameter:
-mSo the content should be pretty similar to a real world root fs layout.
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22874 | 22856 | +0.1% qgroup dirty extents | 225251 | 140431 | -37.7% time (sys) | 40.161s | 20.574s | -48.7% time (real) | 42.163s | 25.173s | -40.3%*: (
val_new-val_old) /val_old* 100%And the difference is becoming more and more obvious if more snapshots are created.
If we increase the number of snapshots to 64 (4 times the number of references, and 64 snapshots is already not recommended to use with quota)
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22462 | 22467 | +0.0% qgroup dirty extents | 314380 | 140826 | -55.2% time (sys) | 158.033s | 74.292s | -53.0% time (real) | 197.395s | 90.529s | -67.6%For larger fs the saving should be even more obvious.
Changelog:
v2:
Rename "tree reloc tree" to "reloc tree".
Add patch "Don't trace subtree if we're dropping reloc tree" into the patchset.
Fix wrongbtrfs_bin_search()call, which leads to unexpected ENOENT error forbtrfs_qgroup_trace_extent_swap(). Now use dst_path->slots[] directly.v3:
Add new patch to avoid unnecessary data extents trace for metadata relocation.
Better delayed ref time root owner detection to avoid unnecessary tree block tracing.
Add benchmark result for the patchset.Qu Wenruo (7):
btrfs: qgroup: Introduce trace event to analyse the number of dirty
extents accounted
btrfs: qgroup: Introduce function to trace two swaped extents
btrfs: qgroup: Introduce function to find all new tree blocks of reloc
tree
btrfs: qgroup: Use generation aware subtree swap to mark dirty extents
btrfs: qgroup: Don't trace subtree if we're dropping reloc tree
btrfs: delayed-ref: Introduce new parameter for
btrfs_add_delayed_tree_ref()to reduce unnecessary qgroup tracing
btrfs: qgroup: Only trace data extents in leaves if we're relocating
data block groupfs/btrfs/delayed-ref.c | 5 +- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 25 ++- fs/btrfs/qgroup.c | 347 +++++++++++++++++++++++++++++++++++ fs/btrfs/qgroup.h | 11 ++ fs/btrfs/relocation.c | 15 +- include/trace/events/btrfs.h | 21 +++ 7 files changed, 405 insertions(+), 20 deletions(-)Signature · 1 line
2.18.0
Quoted 72 lines · Qu Wenruo
Quoted 36 lines · David Sterba
Quoted 3 lines · Qu Wenruo
This patchset can be fetched from github:
https://github.com/adam900710/linux/tree/qgroup_balance_skip_trees
The base commit is v4.19-rc1 tag.I want to merge this patchset to 4.20, it's been in for-next for some time and it addresses a problem that gets reported very often.
I'm still doing some tests, there are minor issues that are not blocking, more code review is always welcome.
Quoted 25 lines
There are a lot of reports of system hang for balance on quota enabled fs.
It's most obvious for large fs.The hang is caused by tons of unmodified extents marked as qgroup dirty. Such unmodified/unrelated sources include:
1) Unmodified subtree
2) Subtree drop for reloc tree
(BTW, other sources includes unmodified file extent items)E.g.
OO = Old tree blocks from file tree
NN = New tree blocks from reloc treefile tree reloc tree
OO (a) NN (a)
/ \ / \
(b) OO OO (c) (b) NN NN (c)
/ \ / \ / \ / \
OO OO OO OO OO OO OO NN
(d) (e) (f) (g) (d) (e) (f) (g)In above case, balance will modify nodeptr in OO(a) to point NN(b) and NN(c), and modify NN(a) to point to OO(B) and OO(c).
Quoted 6 lines
Quoted 3 lines
Before this patch, quota will mark the whole subtree from its parent down to the leaves as dirty.
So btrfs quota need to trace all tree block from (a) to (g).I find the use of 'trace' a bit confusing as there are the trace events, but as it's already used in the qgroup code I think it can stay as is.
I'm pretty open to rename the word "trace".
Any recommendation for a newer name?
Quoted 16 lines
Quoted 16 lines
However tree blocks (d) (e) (f) are shared between both trees, thus there is no need to trace those 3 tree blocks.
This patchset will change how this work by only tracing modified tree blocks in reloc tree, and their counter parts in file tree.
With this patch, we could skip tree blocks OO(d)~OO(f) in above example, thus reduce some some overhead caused by qgroup.
The improvement is mostly related to metadata relocation.
Also, for metadata relocation, we don't really need to trace data extents as they're not modified at all.
Quoted 5 lines
Quoted 1 line
[[Benchmark]]
[...]
Thanks for the benchmarks, it would be good to add the information to the patch that's bringing the performance improvement.
Quoted 52 lines
Could do that.
However the current improved (from around 10 *
nr_relocatedto 6~7 *nr_relocated) is the final result of the last 4 patches.I'm not pretty sure if any single patch could bring obvious improvement.
Quoted 45 lines
Quoted 45 lines
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.Mkfs parameter:
--nodesize 4K (To bump up tree size)Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)Snapshots:
16 snapshots of the original subvolume. each snapshot has 3 random files modified.balance parameter:
-mSo the content should be pretty similar to a real world root fs layout.
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22874 | 22856 | +0.1% qgroup dirty extents | 225251 | 140431 | -37.7% time (sys) | 40.161s | 20.574s | -48.7% time (real) | 42.163s | 25.173s | -40.3%*: (
val_new-val_old) /val_old* 100%And the difference is becoming more and more obvious if more snapshots are created.
If we increase the number of snapshots to 64 (4 times the number of references, and 64 snapshots is already not recommended to use with quota)
| v4.19-rc1 | w/ patchset | diff (*) --------------------------------------------------------------- relocated extents | 22462 | 22467 | +0.0% qgroup dirty extents | 314380 | 140826 | -55.2% time (sys) | 158.033s | 74.292s | -53.0% time (real) | 197.395s | 90.529s | -67.6%
BTW, this result is still far from perfection.
(and in real world case, due to extra disk IO and tree read seek, the improvement could be less obvious)
The theoretical minimal of qgroup dirty extents should be only 2 * nr_relocated (maybe 3, at most 4 due to other overhead, but definitely not current 6~7).
And further more, the real big part is the backref walk code. Currently we're using btrfs_find_all_roots(), which doesn't do any cache for backref.
We have a cached backref implementation in relocation.c::build_backref_tree().
Jeff is working on a global version of it with even better roots result cache.
Which should make total time linear to qgroup dirty extents.
But currently, I'm working to reduce nr_relocated to theoretical minimal first.
(And enhance the comment for any potential reviewer)
Thanks,
Qu
Quoted 44 lines
Quoted 43 lines
Quoted 43 lines
For larger fs the saving should be even more obvious.
Changelog:
v2:
Rename "tree reloc tree" to "reloc tree".
Add patch "Don't trace subtree if we're dropping reloc tree" into the patchset.
Fix wrongbtrfs_bin_search()call, which leads to unexpected ENOENT error forbtrfs_qgroup_trace_extent_swap(). Now use dst_path->slots[] directly.v3:
Add new patch to avoid unnecessary data extents trace for metadata relocation.
Better delayed ref time root owner detection to avoid unnecessary tree block tracing.
Add benchmark result for the patchset.Qu Wenruo (7):
btrfs: qgroup: Introduce trace event to analyse the number of dirty
extents accounted
btrfs: qgroup: Introduce function to trace two swaped extents
btrfs: qgroup: Introduce function to find all new tree blocks of reloc
tree
btrfs: qgroup: Use generation aware subtree swap to mark dirty extents
btrfs: qgroup: Don't trace subtree if we're dropping reloc tree
btrfs: delayed-ref: Introduce new parameter for
btrfs_add_delayed_tree_ref()to reduce unnecessary qgroup tracing
btrfs: qgroup: Only trace data extents in leaves if we're relocating
data block groupfs/btrfs/delayed-ref.c | 5 +- fs/btrfs/delayed-ref.h | 1 + fs/btrfs/extent-tree.c | 25 ++- fs/btrfs/qgroup.c | 347 +++++++++++++++++++++++++++++++++++ fs/btrfs/qgroup.h | 11 ++ fs/btrfs/relocation.c | 15 +- include/trace/events/btrfs.h | 21 +++ 7 files changed, 405 insertions(+), 20 deletions(-)Signature · 1 line
2.18.0
Quoted 10 lines · Qu Wenruo
Quoted 6 lines
Quoted 3 lines
Before this patch, quota will mark the whole subtree from its parent down to the leaves as dirty.
So btrfs quota need to trace all tree block from (a) to (g).I find the use of 'trace' a bit confusing as there are the trace events, but as it's already used in the qgroup code I think it can stay as is.
I'm pretty open to rename the word "trace".
Any recommendation for a newer name?
No, we can rename the functions later if needed.
Quoted 21 lines
Quoted 15 lines
Quoted 15 lines
However tree blocks (d) (e) (f) are shared between both trees, thus there is no need to trace those 3 tree blocks.
This patchset will change how this work by only tracing modified tree blocks in reloc tree, and their counter parts in file tree.
With this patch, we could skip tree blocks OO(d)~OO(f) in above example, thus reduce some some overhead caused by qgroup.
The improvement is mostly related to metadata relocation.
Also, for metadata relocation, we don't really need to trace data extents as they're not modified at all.
Quoted 5 lines
Quoted 1 line
[[Benchmark]]
[...]
Thanks for the benchmarks, it would be good to add the information to the patch that's bringing the performance improvement.
Quoted 6 lines
Could do that.
However the current improved (from around 10 *
nr_relocatedto 6~7 *nr_relocated) is the final result of the last 4 patches.I'm not pretty sure if any single patch could bring obvious improvement.
Patch 5 would be a good candidate, noting that further patches bring more performance improvements.