crypto: lrw - Simplify and optimize the LRW template
Subsystems (2)
v3 cover crypto: lrw - Simplify and optimize the LRW template
This patchset is a follow-up to a similar patch for XTS:
https://patchwork.kernel.org/patch/10588775/
The first patch applies a small optimization to the tweak computation and the second simplifes away the use of auxiliary buffer to cache computed tweaks.
Changes in v3:
- fix a copy-paste error
v2: https://www.spinics.net/lists/linux-crypto/msg34890.html
Changes in v2:
- small cleanup suggested by Eric Biggers
v1: https://www.spinics.net/lists/linux-crypto/msg34871.html
Ondrej Mosnacek (2):
crypto: lrw - Optimize tweak computation
crypto: lrw - Do not use auxiliary buffer
crypto/lrw.c | 327 ++++++++++++--------------------------------------- 1 file changed, 75 insertions(+), 252 deletions(-)
Signature · 1 line
2.17.1
PATCH v3 1/2 crypto: lrw - Optimize tweak computation
This patch rewrites the tweak computation to a slightly simpler method that performs less bswaps. Based on performance measurements the new code seems to provide slightly better performance than the old one.
PERFORMANCE MEASUREMENTS (x86_64)
Performed using: https://gitlab.com/omos/linux-crypto-bench
Crypto driver used: lrw(ecb-aes-aesni)
Before:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns)
lrw(aes) 256 64 204 286
lrw(aes) 320 64 227 203
lrw(aes) 384 64 208 204
lrw(aes) 256 512 441 439
lrw(aes) 320 512 456 455
lrw(aes) 384 512 469 483
lrw(aes) 256 4096 2136 2190
lrw(aes) 320 4096 2161 2213
lrw(aes) 384 4096 2295 2369
lrw(aes) 256 16384 7692 7868
lrw(aes) 320 16384 8230 8691
lrw(aes) 384 16384 8971 8813
lrw(aes) 256 32768 15336 15560
lrw(aes) 320 32768 16410 16346
lrw(aes) 384 32768 18023 17465After:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns)
lrw(aes) 256 64 200 203
lrw(aes) 320 64 202 204
lrw(aes) 384 64 204 205
lrw(aes) 256 512 415 415
lrw(aes) 320 512 432 440
lrw(aes) 384 512 449 451
lrw(aes) 256 4096 1838 1995
lrw(aes) 320 4096 2123 1980
lrw(aes) 384 4096 2100 2119
lrw(aes) 256 16384 7183 6954
lrw(aes) 320 16384 7844 7631
lrw(aes) 384 16384 8256 8126
lrw(aes) 256 32768 14772 14484
lrw(aes) 320 32768 15281 15431
lrw(aes) 384 32768 16469 16293--- crypto/lrw.c | 49 +++++++++++++++++++++++++------------------------ 1 file changed, 25 insertions(+), 24 deletions(-)
crypto/lrw.c +25 -24
@@ -120,30 +120,19 @@ static int setkey(struct crypto_skcipher *parent, const u8 *key,return 0 ; } -static inline void inc (be128 *iv) +static int next_index (u32 *counter) { -be64_add_cpu (&iv->b,1 ); -if (!iv->b) -be64_add_cpu (&iv->a,1 ); -} - -/* this returns the number of consequative 1 bits starting -* from the right, get_index128(00 00 00 00 00 00 ... 00 00 10 FB) = 2 */ -static inline int get_index128 (be128 *block) -{ -int x; -__be32 *p = (__be32 *) block; - -for (p +=3 , x =0 ; x <128 ; p--, x +=32 ) { -u32 val =be32_to_cpup (p); - -if (!~val) -continue ; +int i, res =0 ; -return x +ffz (val); +for (i =0 ; i <4 ; i++) { +if (counter[i] +1 !=0 ) { + res +=ffz (counter[i]++); +break ; + } + counter[i] =0 ; + res +=32 ; } - -return x; +return res; }static int post_crypt (struct skcipher_request *req)
@@ -209,8 +198,9 @@ static int pre_crypt(struct skcipher_request *req)struct scatterlist *sg;unsigned cryptlen;unsigned offset; -be128 *iv;bool more; +__u32 *iv; +u32 counter[4 ];int err; subreq = &rctx->subreq;
@@ -227,6 +217,11 @@ static int pre_crypt(struct skcipher_request *req) err =skcipher_walk_virt (&w, subreq, false); iv = w.iv; + counter[0 ] =be32_to_cpu (iv[3 ]); + counter[1 ] =be32_to_cpu (iv[2 ]); + counter[2 ] =be32_to_cpu (iv[1 ]); + counter[3 ] =be32_to_cpu (iv[0 ]); +while (w.nbytes) {unsigned int avail = w.nbytes;be128 *wsrc;
@@ -242,10 +237,16 @@ static int pre_crypt(struct skcipher_request *req)/* T <- I*Key2, using the optimization * discussed in the specification */ be128_xor (&rctx->t, &rctx->t, - &ctx->mulinc[get_index128 (iv)]); -inc (iv); + &ctx->mulinc[next_index (counter)]); }while ((avail -= bs) >= bs); +if (w.nbytes == w.total) { + iv[0 ] =cpu_to_be32 (counter[3 ]); + iv[1 ] =cpu_to_be32 (counter[2 ]); + iv[2 ] =cpu_to_be32 (counter[1 ]); + iv[3 ] =cpu_to_be32 (counter[0 ]); + } + err =skcipher_walk_done (&w, avail); }
Signature · 1 line
2.17.1
Re: [PATCH v3 1/2] crypto: lrw - Optimize tweak computation
Hi Ondrej,
Quoted 82 lines · Ondrej Mosnacek
This patch rewrites the tweak computation to a slightly simpler method that performs less bswaps. Based on performance measurements the new code seems to provide slightly better performance than the old one.
PERFORMANCE MEASUREMENTS (
x86_64)
Performed using: https://gitlab.com/omos/linux-crypto-bench
Crypto driver used: lrw(ecb-aes-aesni)Before:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 204 286 lrw(aes) 320 64 227 203 lrw(aes) 384 64 208 204 lrw(aes) 256 512 441 439 lrw(aes) 320 512 456 455 lrw(aes) 384 512 469 483 lrw(aes) 256 4096 2136 2190 lrw(aes) 320 4096 2161 2213 lrw(aes) 384 4096 2295 2369 lrw(aes) 256 16384 7692 7868 lrw(aes) 320 16384 8230 8691 lrw(aes) 384 16384 8971 8813 lrw(aes) 256 32768 15336 15560 lrw(aes) 320 32768 16410 16346 lrw(aes) 384 32768 18023 17465After:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 200 203 lrw(aes) 320 64 202 204 lrw(aes) 384 64 204 205 lrw(aes) 256 512 415 415 lrw(aes) 320 512 432 440 lrw(aes) 384 512 449 451 lrw(aes) 256 4096 1838 1995 lrw(aes) 320 4096 2123 1980 lrw(aes) 384 4096 2100 2119 lrw(aes) 256 16384 7183 6954 lrw(aes) 320 16384 7844 7631 lrw(aes) 384 16384 8256 8126 lrw(aes) 256 32768 14772 14484 lrw(aes) 320 32768 15281 15431 lrw(aes) 384 32768 16469 16293Signed-off-by Ondrej Mosnacek <[email protected]>--- crypto/lrw.c | 49 +++++++++++++++++++++++++------------------------ 1 file changed, 25 insertions(+), 24 deletions(-)crypto/lrw.c +4
-19@@ -120,30 +120,19 @@ static int setkey(struct crypto_skcipher *parent, const u8 *key,return 0 ; } -static inline void inc (be128 *iv) +static int next_index (u32 *counter) { -be64_add_cpu (&iv->b,1 ); -if (!iv->b) -be64_add_cpu (&iv->a,1 ); -} - -/* this returns the number of consequative 1 bits starting -* from the right, get_index128(00 00 00 00 00 00 ... 00 00 10 FB) = 2 */ -static inline int get_index128 (be128 *block) -{ -int x; -__be32 *p = (__be32 *) block; - -for (p +=3 , x =0 ; x <128 ; p--, x +=32 ) { -u32 val =be32_to_cpup (p); - -if (!~val) -continue ; +int i, res =0 ; -return x +ffz (val); +for (i =0 ; i <4 ; i++) { +if (counter[i] +1 !=0 ) {
crypto/lrw.c static int setkey(struct crypto_skcipher *parent, const u8 *key, · line 136
Quoted 10 lines
crypto/lrw.c +6
-2+ res +=ffz (counter[i]++); +break ; + } + counter[i] =0 ; + res +=32 ; } - -return x; +return res; }
This looks good, but can you leave the comment that says it returns the number of leading 1's in the counter? And now that it increments the counter too.
Actually, I think it's wrong in the case where the counter is all 1's and wraps around. It will XOR with ->mulinc[128], which is off the end of the array, instead of the correct value of ->mulinc[127]... But that's an existing bug :-/ (If you do want to fix that, please do it in a separate patch, probably preceding this one in the series, and add a test vector that covers it...)
crypto/lrw.c static int pre_crypt(struct skcipher_request *req) · line 203
Quoted 10 lines
crypto/lrw.c +2
-1static int post_crypt (struct skcipher_request *req)@@ -209,8 +198,9 @@ static int pre_crypt(struct skcipher_request *req)struct scatterlist *sg;unsigned cryptlen;unsigned offset; -be128 *iv;bool more; +__u32 *iv; +u32 counter[4 ];
'iv' should be '__be32 *', not '__u32 *'.
Quoted 37 lines
crypto/lrw.c +13
-2int err; subreq = &rctx->subreq;@@ -227,6 +217,11 @@ static int pre_crypt(struct skcipher_request *req) err =skcipher_walk_virt (&w, subreq, false); iv = w.iv; + counter[0 ] =be32_to_cpu (iv[3 ]); + counter[1 ] =be32_to_cpu (iv[2 ]); + counter[2 ] =be32_to_cpu (iv[1 ]); + counter[3 ] =be32_to_cpu (iv[0 ]); +while (w.nbytes) {unsigned int avail = w.nbytes;be128 *wsrc;@@ -242,10 +237,16 @@ static int pre_crypt(struct skcipher_request *req)/* T <- I*Key2, using the optimization * discussed in the specification */ be128_xor (&rctx->t, &rctx->t, - &ctx->mulinc[get_index128 (iv)]); -inc (iv); + &ctx->mulinc[next_index (counter)]); }while ((avail -= bs) >= bs); +if (w.nbytes == w.total) { + iv[0 ] =cpu_to_be32 (counter[3 ]); + iv[1 ] =cpu_to_be32 (counter[2 ]); + iv[2 ] =cpu_to_be32 (counter[1 ]); + iv[3 ] =cpu_to_be32 (counter[0 ]); + } + err =skcipher_walk_done (&w, avail); }Signature · 1 line
2.17.1
- Eric
Re: [PATCH v3 1/2] crypto: lrw - Optimize tweak computation
Quoted 82 lines · Eric Biggers
Hi Ondrej,
Quoted 79 lines · Ondrej Mosnacek
This patch rewrites the tweak computation to a slightly simpler method that performs less bswaps. Based on performance measurements the new code seems to provide slightly better performance than the old one.
PERFORMANCE MEASUREMENTS (
x86_64)
Performed using: https://gitlab.com/omos/linux-crypto-bench
Crypto driver used: lrw(ecb-aes-aesni)Before:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 204 286 lrw(aes) 320 64 227 203 lrw(aes) 384 64 208 204 lrw(aes) 256 512 441 439 lrw(aes) 320 512 456 455 lrw(aes) 384 512 469 483 lrw(aes) 256 4096 2136 2190 lrw(aes) 320 4096 2161 2213 lrw(aes) 384 4096 2295 2369 lrw(aes) 256 16384 7692 7868 lrw(aes) 320 16384 8230 8691 lrw(aes) 384 16384 8971 8813 lrw(aes) 256 32768 15336 15560 lrw(aes) 320 32768 16410 16346 lrw(aes) 384 32768 18023 17465After:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 200 203 lrw(aes) 320 64 202 204 lrw(aes) 384 64 204 205 lrw(aes) 256 512 415 415 lrw(aes) 320 512 432 440 lrw(aes) 384 512 449 451 lrw(aes) 256 4096 1838 1995 lrw(aes) 320 4096 2123 1980 lrw(aes) 384 4096 2100 2119 lrw(aes) 256 16384 7183 6954 lrw(aes) 320 16384 7844 7631 lrw(aes) 384 16384 8256 8126 lrw(aes) 256 32768 14772 14484 lrw(aes) 320 32768 15281 15431 lrw(aes) 384 32768 16469 16293Signed-off-by Ondrej Mosnacek <[email protected]>--- crypto/lrw.c | 49 +++++++++++++++++++++++++------------------------ 1 file changed, 25 insertions(+), 24 deletions(-)crypto/lrw.c +2
-18@@ -120,30 +120,19 @@ static int setkey(struct crypto_skcipher *parent, const u8 *key,return 0 ; } -static inline void inc (be128 *iv) +static int next_index (u32 *counter) { -be64_add_cpu (&iv->b,1 ); -if (!iv->b) -be64_add_cpu (&iv->a,1 ); -} - -/* this returns the number of consequative 1 bits starting -* from the right, get_index128(00 00 00 00 00 00 ... 00 00 10 FB) = 2 */ -static inline int get_index128 (be128 *block) -{ -int x; -__be32 *p = (__be32 *) block; - -for (p +=3 , x =0 ; x <128 ; p--, x +=32 ) { -u32 val =be32_to_cpup (p); - -if (!~val) -continue ; +int i, res =0 ;
Quoted 16 lines
crypto/lrw.c static int setkey(struct crypto_skcipher *parent, const u8 *key, · line 136
Quoted 13 lines
crypto/lrw.c +8
-3-return x +ffz (val); +for (i =0 ; i <4 ; i++) { +if (counter[i] +1 !=0 ) { + res +=ffz (counter[i]++); +break ; + } + counter[i] =0 ; + res +=32 ; } - -return x; +return res; }This looks good, but can you leave the comment that says it returns the number of leading 1's in the counter? And now that it increments the counter too.
Good idea, will do.
Quoted 4 lines
Actually, I think it's wrong in the case where the counter is all 1's and wraps around. It will XOR with ->mulinc[128], which is off the end of the array, instead of the correct value of ->mulinc[127]... But that's an existing bug :-/
Oh, right, good catch!
Quoted 2 lines
(If you do want to fix that, please do it in a separate patch, probably preceding this one in the series, and add a test vector that covers it...)
Yeah, will do that.
Quoted 13 lines
crypto/lrw.c static int pre_crypt(struct skcipher_request *req) · line 203
Quoted 11 lines
crypto/lrw.c +2
-1static int post_crypt (struct skcipher_request *req)@@ -209,8 +198,9 @@ static int pre_crypt(struct skcipher_request *req)struct scatterlist *sg;unsigned cryptlen;unsigned offset; -be128 *iv;bool more; +__u32 *iv; +u32 counter[4 ];'iv' should be '
__be32*', not '__u32*'.
Yep.
Quoted 35 lines
Quoted 35 lines
crypto/lrw.c +13
-2int err; subreq = &rctx->subreq;@@ -227,6 +217,11 @@ static int pre_crypt(struct skcipher_request *req) err =skcipher_walk_virt (&w, subreq, false); iv = w.iv; + counter[0 ] =be32_to_cpu (iv[3 ]); + counter[1 ] =be32_to_cpu (iv[2 ]); + counter[2 ] =be32_to_cpu (iv[1 ]); + counter[3 ] =be32_to_cpu (iv[0 ]); +while (w.nbytes) {unsigned int avail = w.nbytes;be128 *wsrc;@@ -242,10 +237,16 @@ static int pre_crypt(struct skcipher_request *req)/* T <- I*Key2, using the optimization * discussed in the specification */ be128_xor (&rctx->t, &rctx->t, - &ctx->mulinc[get_index128 (iv)]); -inc (iv); + &ctx->mulinc[next_index (counter)]); }while ((avail -= bs) >= bs); +if (w.nbytes == w.total) { + iv[0 ] =cpu_to_be32 (counter[3 ]); + iv[1 ] =cpu_to_be32 (counter[2 ]); + iv[2 ] =cpu_to_be32 (counter[1 ]); + iv[3 ] =cpu_to_be32 (counter[0 ]); + } + err =skcipher_walk_done (&w, avail); }
Quoted 5 lines
Quoted 3 lines
--
2.17.1- Eric
Thanks,
Signature · 3 lines
Ondrej Mosnacek <omosnace at redhat dot com> Associate Software Engineer, Security Technologies Red Hat, Inc.
PATCH v3 2/2 crypto: lrw - Do not use auxiliary buffer
In reply to Ondrej MosnacekThis patch simplifies the LRW template to recompute the LRW tweaks from scratch in the second pass and thus also removes the need to allocate a dynamic buffer using kmalloc().
As discussed at [1], the use of kmalloc causes deadlocks with dm-crypt.
PERFORMANCE MEASUREMENTS (x86_64)
Performed using: https://gitlab.com/omos/linux-crypto-bench
Crypto driver used: lrw(ecb-aes-aesni)
The results show that the new code has about the same performance as the old code. For 512-byte message it seems to be even slightly faster, but that might be just noise.
Before:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns)
lrw(aes) 256 64 200 203
lrw(aes) 320 64 202 204
lrw(aes) 384 64 204 205
lrw(aes) 256 512 415 415
lrw(aes) 320 512 432 440
lrw(aes) 384 512 449 451
lrw(aes) 256 4096 1838 1995
lrw(aes) 320 4096 2123 1980
lrw(aes) 384 4096 2100 2119
lrw(aes) 256 16384 7183 6954
lrw(aes) 320 16384 7844 7631
lrw(aes) 384 16384 8256 8126
lrw(aes) 256 32768 14772 14484
lrw(aes) 320 32768 15281 15431
lrw(aes) 384 32768 16469 16293After:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns)
lrw(aes) 256 64 197 196
lrw(aes) 320 64 200 197
lrw(aes) 384 64 203 199
lrw(aes) 256 512 385 380
lrw(aes) 320 512 401 395
lrw(aes) 384 512 415 415
lrw(aes) 256 4096 1869 1846
lrw(aes) 320 4096 2080 1981
lrw(aes) 384 4096 2160 2109
lrw(aes) 256 16384 7077 7127
lrw(aes) 320 16384 7807 7766
lrw(aes) 384 16384 8108 8357
lrw(aes) 256 32768 14111 14454
lrw(aes) 320 32768 15268 15082
lrw(aes) 384 32768 16581 16250[1] https://lkml.org/lkml/2018/8/23/1315
--- crypto/lrw.c | 280 ++++++++++----------------------------------------- 1 file changed, 51 insertions(+), 229 deletions(-)
crypto/lrw.c +51 -229
@@ -29,8 +29,6 @@#include <crypto/b128ops.h> #include <crypto/gf128mul.h> -#define LRW_BUFFER_SIZE 128u -#define LRW_BLOCK_SIZE 16struct priv {
@@ -56,19 +54,7 @@ struct priv { };struct rctx { -be128 buf[LRW_BUFFER_SIZE /sizeof (be128)]; - -be128 t; - -be128 *ext; - -struct scatterlist srcbuf[2 ]; -struct scatterlist dstbuf[2 ]; -struct scatterlist *src; -struct scatterlist *dst; - -unsigned int left; - +be128 t, orig_iv;struct skcipher_request subreq; };
@@ -135,86 +121,31 @@ static int next_index(u32 *counter)return res; } -static int post_crypt (struct skcipher_request *req) +/* +* We compute the tweak masks twice (both before and after the ECB encryption or +* decryption) to avoid having to allocate a temporary buffer and/or make +* mutliple calls to the 'ecb(..)' instance, which usually would be slower than +* just doing the gf128mul_x_ble() calls again. +*/ +static int xor_tweak (struct skcipher_request *req,bool second_pass) { -struct rctx *rctx =skcipher_request_ctx (req); -be128 *buf = rctx->ext ?: rctx->buf; -struct skcipher_request *subreq;const int bs =LRW_BLOCK_SIZE ; -struct skcipher_walk w; -struct scatterlist *sg; -unsigned offset; -int err; - - subreq = &rctx->subreq; - err =skcipher_walk_virt (&w, subreq, false); - -while (w.nbytes) { -unsigned int avail = w.nbytes; -be128 *wdst; - - wdst = w.dst.virt.addr; - -do { -be128_xor (wdst, buf++, wdst); - wdst++; - }while ((avail -= bs) >= bs); - - err =skcipher_walk_done (&w, avail); - } - - rctx->left -= subreq->cryptlen; - -if (err || !rctx->left) - goto out; - - rctx->dst = rctx->dstbuf; - -scatterwalk_done (&w.out,0 ,1 ); - sg = w.out.sg; - offset = w.out.offset; - -if (rctx->dst != sg) { - rctx->dst[0 ] = *sg; -sg_unmark_end (rctx->dst); -scatterwalk_crypto_chain (rctx->dst,sg_next (sg),2 ); - } - rctx->dst[0 ].length -= offset - sg->offset; - rctx->dst[0 ].offset = offset; - -out: -return err; -} - -static int pre_crypt (struct skcipher_request *req) -{struct crypto_skcipher *tfm =crypto_skcipher_reqtfm (req); -struct rctx *rctx =skcipher_request_ctx (req);struct priv *ctx =crypto_skcipher_ctx (tfm); -be128 *buf = rctx->ext ?: rctx->buf; -struct skcipher_request *subreq; -const int bs =LRW_BLOCK_SIZE ; +struct rctx *rctx =skcipher_request_ctx (req); +be128 t = rctx->t;struct skcipher_walk w; -struct scatterlist *sg; -unsigned cryptlen; -unsigned offset; -bool more;__u32 *iv;u32 counter[4 ];int err; - subreq = &rctx->subreq; -skcipher_request_set_tfm (subreq, tfm); - - cryptlen = subreq->cryptlen; - more = rctx->left > cryptlen; -if (!more) - cryptlen = rctx->left; - -skcipher_request_set_crypt (subreq, rctx->src, rctx->dst, - cryptlen, req->iv); +if (second_pass) { + req = &rctx->subreq; +/* set to our TFM to enforce correct alignment: */ +skcipher_request_set_tfm (req, tfm); + } - err =skcipher_walk_virt (&w, subreq, false); + err =skcipher_walk_virt (&w, req, false); iv = w.iv; counter[0 ] =be32_to_cpu (iv[3 ]);
@@ -231,13 +162,11 @@ static int pre_crypt(struct skcipher_request *req) wdst = w.dst.virt.addr;do { - *buf++ = rctx->t; -be128_xor (wdst++, &rctx->t, wsrc++); +be128_xor (wdst++, &t, wsrc++);/* T <- I*Key2, using the optimization * discussed in the specification */ -be128_xor (&rctx->t, &rctx->t, - &ctx->mulinc[next_index (counter)]); +be128_xor (&t, &t, &ctx->mulinc[next_index (counter)]); }while ((avail -= bs) >= bs);if (w.nbytes == w.total) {
@@ -250,175 +179,68 @@ static int pre_crypt(struct skcipher_request *req) err =skcipher_walk_done (&w, avail); } -skcipher_request_set_tfm (subreq, ctx->child); -skcipher_request_set_crypt (subreq, rctx->dst, rctx->dst, - cryptlen,NULL ); - -if (err || !more) - goto out; - - rctx->src = rctx->srcbuf; - -scatterwalk_done (&w.in,0 ,1 ); - sg = w.in.sg; - offset = w.in.offset; - -if (rctx->src != sg) { - rctx->src[0 ] = *sg; -sg_unmark_end (rctx->src); -scatterwalk_crypto_chain (rctx->src,sg_next (sg),2 ); - } - rctx->src[0 ].length -= offset - sg->offset; - rctx->src[0 ].offset = offset; - -out:return err; } -static int init_crypt (struct skcipher_request *req,crypto_completion_t done) -{ -struct priv *ctx =crypto_skcipher_ctx (crypto_skcipher_reqtfm (req)); -struct rctx *rctx =skcipher_request_ctx (req); -struct skcipher_request *subreq; -gfp_t gfp; - - subreq = &rctx->subreq; -skcipher_request_set_callback (subreq, req->base.flags, done, req); - - gfp = req->base.flags &CRYPTO_TFM_REQ_MAY_SLEEP ?GFP_KERNEL : -GFP_ATOMIC ; - rctx->ext =NULL ; - - subreq->cryptlen =LRW_BUFFER_SIZE ; -if (req->cryptlen >LRW_BUFFER_SIZE ) { -unsigned int n =min (req->cryptlen, (unsigned int )PAGE_SIZE ); - - rctx->ext =kmalloc (n, gfp); -if (rctx->ext) - subreq->cryptlen = n; - } - - rctx->src = req->src; - rctx->dst = req->dst; - rctx->left = req->cryptlen; - -/* calculate first value of T */ -memcpy (&rctx->t, req->iv,sizeof (rctx->t)); - -/* T <- I*Key2 */ -gf128mul_64k_bbe (&rctx->t, ctx->table); - -return 0 ; -} - -static void exit_crypt (struct skcipher_request *req) +static int xor_tweak_pre (struct skcipher_request *req) { -struct rctx *rctx =skcipher_request_ctx (req); - - rctx->left =0 ; - -if (rctx->ext) -kzfree (rctx->ext); +return xor_tweak (req, false); } -static int do_encrypt (struct skcipher_request *req,int err) +static int xor_tweak_post (struct skcipher_request *req) { -struct rctx *rctx =skcipher_request_ctx (req); -struct skcipher_request *subreq; - - subreq = &rctx->subreq; - -while (!err && rctx->left) { - err =pre_crypt (req) ?: -crypto_skcipher_encrypt (subreq) ?: -post_crypt (req); - -if (err == -EINPROGRESS || err == -EBUSY ) -return err; - } - -exit_crypt (req); -return err; +return xor_tweak (req, true); } -static void encrypt_done (struct crypto_async_request *areq,int err) +static void crypt_done (struct crypto_async_request *areq,int err) {struct skcipher_request *req = areq->data; -struct skcipher_request *subreq; -struct rctx *rctx; - - rctx =skcipher_request_ctx (req); - -if (err == -EINPROGRESS ) { -if (rctx->left != req->cryptlen) -return ; - goto out; - } - subreq = &rctx->subreq; - subreq->base.flags &=CRYPTO_TFM_REQ_MAY_BACKLOG ; +if (!err) + err =xor_tweak_post (req); - err =do_encrypt (req, err ?:post_crypt (req)); -if (rctx->left) -return ; - -out:skcipher_request_complete (req, err); } -static int encrypt (struct skcipher_request *req) -{ -return do_encrypt (req,init_crypt (req, encrypt_done)); -} - -static int do_decrypt (struct skcipher_request *req,int err) +static void init_crypt (struct skcipher_request *req) { +struct priv *ctx =crypto_skcipher_ctx (crypto_skcipher_reqtfm (req));struct rctx *rctx =skcipher_request_ctx (req); -struct skcipher_request *subreq; +struct skcipher_request *subreq = &rctx->subreq; - subreq = &rctx->subreq; - -while (!err && rctx->left) { - err =pre_crypt (req) ?: -crypto_skcipher_decrypt (subreq) ?: -post_crypt (req); +skcipher_request_set_tfm (subreq, ctx->child); +skcipher_request_set_callback (subreq, req->base.flags, crypt_done, req); +skcipher_request_set_crypt (subreq, req->dst, req->dst, + req->cryptlen, &rctx->orig_iv); -if (err == -EINPROGRESS || err == -EBUSY ) -return err; - } +/* calculate first value of T */ +memcpy (&rctx->orig_iv, req->iv,sizeof (rctx->t)); + rctx->t = rctx->orig_iv; -exit_crypt (req); -return err; +/* T <- I*Key2 */ +gf128mul_64k_bbe (&rctx->t, ctx->table); } -static void decrypt_done (struct crypto_async_request *areq,int err) +static int encrypt (struct skcipher_request *req) { -struct skcipher_request *req = areq->data; -struct skcipher_request *subreq; -struct rctx *rctx; - - rctx =skcipher_request_ctx (req); - -if (err == -EINPROGRESS ) { -if (rctx->left != req->cryptlen) -return ; - goto out; - } - - subreq = &rctx->subreq; - subreq->base.flags &=CRYPTO_TFM_REQ_MAY_BACKLOG ; - - err =do_decrypt (req, err ?:post_crypt (req)); -if (rctx->left) -return ; +struct rctx *rctx =skcipher_request_ctx (req); +struct skcipher_request *subreq = &rctx->subreq; -out: -skcipher_request_complete (req, err); +init_crypt (req); +return xor_tweak_pre (req) ?: +crypto_skcipher_encrypt (subreq) ?: +xor_tweak_post (req); }static int decrypt (struct skcipher_request *req) { -return do_decrypt (req,init_crypt (req, decrypt_done)); +struct rctx *rctx =skcipher_request_ctx (req); +struct skcipher_request *subreq = &rctx->subreq; + +init_crypt (req); +return xor_tweak_pre (req) ?: +crypto_skcipher_decrypt (subreq) ?: +xor_tweak_post (req); }static int init_tfm (struct crypto_skcipher *tfm)
Signature · 1 line
2.17.1
Re: [PATCH v3 2/2] crypto: lrw - Do not use auxiliary buffer
Quoted 92 lines · Ondrej Mosnacek
This patch simplifies the LRW template to recompute the LRW tweaks from scratch in the second pass and thus also removes the need to allocate a dynamic buffer using
kmalloc().As discussed at [1], the use of kmalloc causes deadlocks with dm-crypt.
PERFORMANCE MEASUREMENTS (
x86_64)
Performed using: https://gitlab.com/omos/linux-crypto-bench
Crypto driver used: lrw(ecb-aes-aesni)The results show that the new code has about the same performance as the old code. For 512-byte message it seems to be even slightly faster, but that might be just noise.
Before:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 200 203 lrw(aes) 320 64 202 204 lrw(aes) 384 64 204 205 lrw(aes) 256 512 415 415 lrw(aes) 320 512 432 440 lrw(aes) 384 512 449 451 lrw(aes) 256 4096 1838 1995 lrw(aes) 320 4096 2123 1980 lrw(aes) 384 4096 2100 2119 lrw(aes) 256 16384 7183 6954 lrw(aes) 320 16384 7844 7631 lrw(aes) 384 16384 8256 8126 lrw(aes) 256 32768 14772 14484 lrw(aes) 320 32768 15281 15431 lrw(aes) 384 32768 16469 16293After:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 197 196 lrw(aes) 320 64 200 197 lrw(aes) 384 64 203 199 lrw(aes) 256 512 385 380 lrw(aes) 320 512 401 395 lrw(aes) 384 512 415 415 lrw(aes) 256 4096 1869 1846 lrw(aes) 320 4096 2080 1981 lrw(aes) 384 4096 2160 2109 lrw(aes) 256 16384 7077 7127 lrw(aes) 320 16384 7807 7766 lrw(aes) 384 16384 8108 8357 lrw(aes) 256 32768 14111 14454 lrw(aes) 320 32768 15268 15082 lrw(aes) 384 32768 16581 16250[1] https://lkml.org/lkml/2018/8/23/1315
Signed-off-by Ondrej Mosnacek <[email protected]>--- crypto/lrw.c | 280 ++++++++++----------------------------------------- 1 file changed, 51 insertions(+), 229 deletions(-)crypto/lrw.c +1
-15@@ -29,8 +29,6 @@#include <crypto/b128ops.h> #include <crypto/gf128mul.h> -#define LRW_BUFFER_SIZE 128u -#define LRW_BLOCK_SIZE 16struct priv {@@ -56,19 +54,7 @@ struct priv { };struct rctx { -be128 buf[LRW_BUFFER_SIZE /sizeof (be128)]; - -be128 t; - -be128 *ext; - -struct scatterlist srcbuf[2 ]; -struct scatterlist dstbuf[2 ]; -struct scatterlist *src; -struct scatterlist *dst; - -unsigned int left; - +be128 t, orig_iv;struct skcipher_request subreq; };
crypto/lrw.c static int next_index(u32 *counter) · line 129
Quoted 10 lines
crypto/lrw.c +6
-1@@ -135,86 +121,31 @@ static int next_index(u32 *counter)return res; } -static int post_crypt (struct skcipher_request *req) +/* +* We compute the tweak masks twice (both before and after the ECB encryption or +* decryption) to avoid having to allocate a temporary buffer and/or make +* mutliple calls to the 'ecb(..)' instance, which usually would be slower than +* just doing the gf128mul_x_ble() calls again. +*/
next_index(), not gf128mul_x_ble().
Quoted 7 lines
crypto/lrw.c +3
-1+static void init_crypt (struct skcipher_request *req) { +struct priv *ctx =crypto_skcipher_ctx (crypto_skcipher_reqtfm (req));struct rctx *rctx =skcipher_request_ctx (req); -struct skcipher_request *subreq; +struct skcipher_request *subreq = &rctx->subreq;
crypto/lrw.c static int pre_crypt(struct skcipher_request *req) · line 214
Quoted 10 lines
crypto/lrw.c +4
-6- subreq = &rctx->subreq; - -while (!err && rctx->left) { - err =pre_crypt (req) ?: -crypto_skcipher_decrypt (subreq) ?: -post_crypt (req); +skcipher_request_set_tfm (subreq, ctx->child); +skcipher_request_set_callback (subreq, req->base.flags, crypt_done, req); +skcipher_request_set_crypt (subreq, req->dst, req->dst, + req->cryptlen, &rctx->orig_iv);
Can you leave a comment that the 'iv' of 'subreq' is set to 'orig_iv' is set so that it's available in xor_tweak_post()? My first thought was that the 'iv' should be NULL as this same request is also used for the ECB step.
Or alternatively, you could get the IV directly from 'rctx->orig_iv' in xor_tweak(), and only save the incremented IV back to 'walk.iv' on the first pass. Then subreq->iv would be left NULL.
- Eric
Re: [PATCH v3 2/2] crypto: lrw - Do not use auxiliary buffer
Quoted 96 lines · Eric Biggers
Quoted 95 lines · Ondrej Mosnacek
This patch simplifies the LRW template to recompute the LRW tweaks from scratch in the second pass and thus also removes the need to allocate a dynamic buffer using
kmalloc().As discussed at [1], the use of kmalloc causes deadlocks with dm-crypt.
PERFORMANCE MEASUREMENTS (
x86_64)
Performed using: https://gitlab.com/omos/linux-crypto-bench
Crypto driver used: lrw(ecb-aes-aesni)The results show that the new code has about the same performance as the old code. For 512-byte message it seems to be even slightly faster, but that might be just noise.
Before:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 200 203 lrw(aes) 320 64 202 204 lrw(aes) 384 64 204 205 lrw(aes) 256 512 415 415 lrw(aes) 320 512 432 440 lrw(aes) 384 512 449 451 lrw(aes) 256 4096 1838 1995 lrw(aes) 320 4096 2123 1980 lrw(aes) 384 4096 2100 2119 lrw(aes) 256 16384 7183 6954 lrw(aes) 320 16384 7844 7631 lrw(aes) 384 16384 8256 8126 lrw(aes) 256 32768 14772 14484 lrw(aes) 320 32768 15281 15431 lrw(aes) 384 32768 16469 16293After:
ALGORITHM KEY (b) DATA (B) TIME ENC (ns) TIME DEC (ns) lrw(aes) 256 64 197 196 lrw(aes) 320 64 200 197 lrw(aes) 384 64 203 199 lrw(aes) 256 512 385 380 lrw(aes) 320 512 401 395 lrw(aes) 384 512 415 415 lrw(aes) 256 4096 1869 1846 lrw(aes) 320 4096 2080 1981 lrw(aes) 384 4096 2160 2109 lrw(aes) 256 16384 7077 7127 lrw(aes) 320 16384 7807 7766 lrw(aes) 384 16384 8108 8357 lrw(aes) 256 32768 14111 14454 lrw(aes) 320 32768 15268 15082 lrw(aes) 384 32768 16581 16250[1] https://lkml.org/lkml/2018/8/23/1315
Signed-off-by Ondrej Mosnacek <[email protected]>--- crypto/lrw.c | 280 ++++++++++----------------------------------------- 1 file changed, 51 insertions(+), 229 deletions(-)crypto/lrw.c +1
-15@@ -29,8 +29,6 @@#include <crypto/b128ops.h> #include <crypto/gf128mul.h> -#define LRW_BUFFER_SIZE 128u -#define LRW_BLOCK_SIZE 16struct priv {@@ -56,19 +54,7 @@ struct priv { };struct rctx { -be128 buf[LRW_BUFFER_SIZE /sizeof (be128)]; - -be128 t; - -be128 *ext; - -struct scatterlist srcbuf[2 ]; -struct scatterlist dstbuf[2 ]; -struct scatterlist *src; -struct scatterlist *dst; - -unsigned int left; - +be128 t, orig_iv;struct skcipher_request subreq; };@@ -135,86 +121,31 @@ static int next_index(u32 *counter)return res; }
Quoted 9 lines
crypto/lrw.c static int next_index(u32 *counter) · line 129
Quoted 7 lines
crypto/lrw.c +6
-1-static int post_crypt (struct skcipher_request *req) +/* +* We compute the tweak masks twice (both before and after the ECB encryption or +* decryption) to avoid having to allocate a temporary buffer and/or make +* mutliple calls to the 'ecb(..)' instance, which usually would be slower than +* just doing the gf128mul_x_ble() calls again. +*/
next_index(), notgf128mul_x_ble().
Fixed for next revision, thanks.
Quoted 23 lines
Quoted 8 lines
crypto/lrw.c +3
-1+static void init_crypt (struct skcipher_request *req) { +struct priv *ctx =crypto_skcipher_ctx (crypto_skcipher_reqtfm (req));struct rctx *rctx =skcipher_request_ctx (req); -struct skcipher_request *subreq; +struct skcipher_request *subreq = &rctx->subreq;crypto/lrw.c static int pre_crypt(struct skcipher_request *req) · line 214
Quoted 10 lines
crypto/lrw.c +4
-6- subreq = &rctx->subreq; - -while (!err && rctx->left) { - err =pre_crypt (req) ?: -crypto_skcipher_decrypt (subreq) ?: -post_crypt (req); +skcipher_request_set_tfm (subreq, ctx->child); +skcipher_request_set_callback (subreq, req->base.flags, crypt_done, req); +skcipher_request_set_crypt (subreq, req->dst, req->dst, + req->cryptlen, &rctx->orig_iv);Can you leave a comment that the 'iv' of 'subreq' is set to '
orig_iv' is set so that it's available inxor_tweak_post()? My first thought was that the 'iv' should be NULL as this same request is also used for the ECB step.
Quoted 3 lines
Or alternatively, you could get the IV directly from '
rctx->orig_iv' inxor_tweak(), and only save the incremented IV back to 'walk.iv' on the first pass. Thensubreq->ivwould be left NULL.
Good point, now that we have the explicit first/second pass distinction this should be quite easy to do and will be also cleaner.
Thanks,
Signature · 3 lines
Ondrej Mosnacek <omosnace at redhat dot com> Associate Software Engineer, Security Technologies Red Hat, Inc.