Skip to contentSkip to conversation

platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port

PATCH New Heikki Krogerus 1 participant 1 message Sep 11, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 7/10 platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port

Assigning the mux to the USB Type-C port on top of fusb302. That will prepare this driver for the change in the USB Type-C class code, where the class driver will assume the muxes to be always assigned to the ports and not the controllers.

Once the USB Type-C class driver has been updated, the connections between the mux and fusb302 can be dropped.

---
 drivers/platform/x86/intel_cht_int33fe.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/platform/x86/intel_cht_int33fe.c +11 -1
index 424064187124..419ce8c8ffb5 100644
@@ -34,7 +34,7 @@ struct cht_int33fe_data {
 	struct i2c_client *fusb302;
 	struct i2c_client *pi3usb30532;
 	/* Contain a list-head must be per device */
-	struct device_connection connections[5];
+	struct device_connection connections[8];
 };
 
 /*
@@ -187,6 +187,16 @@ static int cht_int33fe_probe(struct i2c_client *client)
 	data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
 	data->connections[3].id = "usb-role-switch";
 
+	data->connections[4].endpoint[0] = "port0";
+	data->connections[4].endpoint[1] = "i2c-pi3usb30532";
+	data->connections[4].id = "typec-switch";
+	data->connections[5].endpoint[0] = "port0";
+	data->connections[5].endpoint[1] = "i2c-pi3usb30532";
+	data->connections[5].id = "typec-mux";
+	data->connections[6].endpoint[0] = "port0";
+	data->connections[6].endpoint[1] = "i2c-pi3usb30532";
+	data->connections[6].id = "idff01m01";
+
 	device_connections_add(data->connections);
 
 	memset(&board_info, 0, sizeof(board_info));