crypto: skcipher - Fix -Wstringop-truncation warnings
Subsystems (2)
PATCH 1/29 crypto: skcipher - Fix -Wstringop-truncation warnings
From: Stafford Horne <[email protected]>
[ Upstream commit cefd769fd0192c84d638f66da202459ed8ad63ba ]
As of GCC 9.0.0 the build is reporting warnings like:
crypto/ablkcipher.c: In function ‘crypto_ablkcipher_report’:
crypto/ablkcipher.c:374:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation]
strncpy(rblkcipher.geniv, alg->cra_ablkcipher.geniv ?: "<default>",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(rblkcipher.geniv));
~~~~~~~~~~~~~~~~~~~~~~~~~This means the strnycpy might create a non null terminated string. Fix this by explicitly performing '\0' termination.
--- crypto/ablkcipher.c | 2 ++ crypto/blkcipher.c | 1 + 2 files changed, 3 insertions(+)
crypto/ablkcipher.c +2 -0
@@ -382,6 +382,7 @@ static int crypto_ablkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)strncpy (rblkcipher.type,"ablkcipher" ,sizeof (rblkcipher.type));strncpy (rblkcipher.geniv, alg->cra_ablkcipher.geniv ?:"<default>" ,sizeof (rblkcipher.geniv)); + rblkcipher.geniv[sizeof (rblkcipher.geniv) -1 ] ='\0' ; rblkcipher.blocksize = alg->cra_blocksize; rblkcipher.min_keysize = alg->cra_ablkcipher.min_keysize;
@@ -463,6 +464,7 @@ static int crypto_givcipher_report(struct sk_buff *skb, struct crypto_alg *alg)strncpy (rblkcipher.type,"givcipher" ,sizeof (rblkcipher.type));strncpy (rblkcipher.geniv, alg->cra_ablkcipher.geniv ?:"<built-in>" ,sizeof (rblkcipher.geniv)); + rblkcipher.geniv[sizeof (rblkcipher.geniv) -1 ] ='\0' ; rblkcipher.blocksize = alg->cra_blocksize; rblkcipher.min_keysize = alg->cra_ablkcipher.min_keysize;
crypto/blkcipher.c +1 -0
@@ -514,6 +514,7 @@ static int crypto_blkcipher_report(struct sk_buff *skb, struct crypto_alg *alg)strncpy (rblkcipher.type,"blkcipher" ,sizeof (rblkcipher.type));strncpy (rblkcipher.geniv, alg->cra_blkcipher.geniv ?:"<default>" ,sizeof (rblkcipher.geniv)); + rblkcipher.geniv[sizeof (rblkcipher.geniv) -1 ] ='\0' ; rblkcipher.blocksize = alg->cra_blocksize; rblkcipher.min_keysize = alg->cra_blkcipher.min_keysize;
Signature · 1 line
2.17.1
PATCH 2/29 tsl2550: fix lux1_input error in low light
From: Matt Ranostay <[email protected]>
[ Upstream commit ce054546cc2c26891cefa2f284d90d93b52205de ]
ADC channel 0 photodiode detects both infrared + visible light, but ADC channel 1 just detects infrared. However, the latter is a bit more sensitive in that range so complete darkness or low light causes a error condition in which the chan0 - chan1 is negative that results in a -EAGAIN.
This patch changes the resulting lux1_input sysfs attribute message from "Resource temporarily unavailable" to a user-grokable lux value of 0.
--- drivers/misc/tsl2550.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/tsl2550.c +1 -1
@@ -177,7 +177,7 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1) }else lux =0 ; else - return -EAGAIN; + return 0;/* LUX range check */ return lux >TSL2550_MAX_LUX ?TSL2550_MAX_LUX : lux;
Signature · 1 line
2.17.1
PATCH 3/29 x86/numa_emulation: Fix emulated-to-physical node mapping
In reply to Sasha LevinFrom: Dan Williams <[email protected]>
[ Upstream commit 3b6c62f363a19ce82bf378187ab97c9dc01e3927 ]
Without this change the distance table calculation for emulated nodes may use the wrong numa node and report an incorrect distance.
--- arch/x86/mm/numa_emulation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/mm/numa_emulation.c +1 -1
@@ -60,7 +60,7 @@ static int __init emu_setup_memblk(struct numa_meminfo *ei, eb->nid = nid;if (emu_nid_to_phys[nid] ==NUMA_NO_NODE ) - emu_nid_to_phys[nid] = nid; + emu_nid_to_phys[nid] = pb->nid; pb->start += size;if (pb->start >= pb->end) {
Signature · 1 line
2.17.1
PATCH 4/29 uwb: hwa-rc: fix memory leak at probe
In reply to Sasha LevinFrom: Anton Vasilyev <[email protected]>
[ Upstream commit 11b71782c1d10d9bccc31825cf84291cd7588a1e ]
hwarc_probe() allocates memory for hwarc, but does not free it if uwb_rc_add() or hwarc_get_version() fail.
Found by Linux Driver Verification project (linuxtesting.org).
--- drivers/uwb/hwa-rc.c | 1 + 1 file changed, 1 insertion(+)
drivers/uwb/hwa-rc.c +1 -0
@@ -875,6 +875,7 @@ static int hwarc_probe(struct usb_interface *iface, error_rc_add:usb_put_intf (iface);usb_put_dev (hwarc->usb_dev); +kfree (hwarc); error_alloc:uwb_rc_put (uwb_rc); error_rc_alloc:
Signature · 1 line
2.17.1
PATCH 5/29 USB: serial: kobil_sct: fix modem-status error handling
In reply to Sasha LevinFrom: Johan Hovold <[email protected]>
[ Upstream commit a420b5d939ee58f1d950f0ea782834056520aeaa ]
Make sure to return -EIO in case of a short modem-status read request.
While at it, split the debug message to not include the (zeroed) transfer-buffer content in case of errors.
--- drivers/usb/serial/kobil_sct.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/usb/serial/kobil_sct.c +10 -2
@@ -396,12 +396,20 @@ static int kobil_tiocmget(struct tty_struct *tty) transfer_buffer_length, KOBIL_TIMEOUT); -dev_dbg (&port->dev,"%s - Send get_status_line_state URB returns: %i. Statusline: %02x\n" , - __func__, result, transfer_buffer[0 ]); +dev_dbg (&port->dev,"Send get_status_line_state URB returns: %i\n" , + result); +if (result <1 ) { +if (result >=0 ) + result = -EIO ; + goto out_free; + } + +dev_dbg (&port->dev,"Statusline: %02x\n" , transfer_buffer[0 ]); result =0 ;if ((transfer_buffer[0 ] &SUSBCR_GSL_DSR ) !=0 ) result =TIOCM_DSR ; +out_free:kfree (transfer_buffer);return result; }
Signature · 1 line
2.17.1
PATCH 6/29 media: exynos4-is: Prevent NULL pointer dereference in __isp_video_try_fmt()
In reply to Sasha LevinFrom: Sylwester Nawrocki <[email protected]>
[ Upstream commit 7c1b9a5aeed91bef98988ac0fcf38c8c1f4f9a3a ]
This patch fixes potential NULL pointer dereference as indicated by the following static checker warning:
drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane()
error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'.
--- drivers/media/platform/exynos4-is/fimc-isp-video.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/media/platform/exynos4-is/fimc-isp-video.c +8 -3
@@ -389,12 +389,17 @@ static void __isp_video_try_fmt(struct fimc_isp *isp,struct v4l2_pix_format_mplane *pixm, const struct fimc_fmt **fmt) { - *fmt =fimc_isp_find_format (&pixm->pixelformat,NULL ,2 ); + const struct fimc_fmt *__fmt; + + __fmt =fimc_isp_find_format (&pixm->pixelformat,NULL ,2 ); + +if (fmt) + *fmt = __fmt; pixm->colorspace =V4L2_COLORSPACE_SRGB ; pixm->field =V4L2_FIELD_NONE ; - pixm->num_planes = (*fmt)->memplanes; - pixm->pixelformat = (*fmt)->fourcc; + pixm->num_planes = __fmt->memplanes; + pixm->pixelformat = __fmt->fourcc;/* * TODO: double check with the docmentation these width/height * constraints are correct.
Signature · 1 line
2.17.1
PATCH 7/29 powerpc/kdump: Handle crashkernel memory reservation failure
In reply to Sasha LevinFrom: Hari Bathini <[email protected]>
[ Upstream commit 8950329c4a64c6d3ca0bc34711a1afbd9ce05657 ]
Memory reservation for crashkernel could fail if there are holes around kdump kernel offset (128M). Fail gracefully in such cases and print an error message.
--- arch/powerpc/kernel/machine_kexec.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
arch/powerpc/kernel/machine_kexec.c +6 -1
@@ -186,7 +186,12 @@ void __init reserve_crashkernel(void) (unsigned long )(crashk_res.start >>20 ), (unsigned long)(memblock_phys_mem_size() >> 20)); -memblock_reserve (crashk_res.start, crash_size); +if (!memblock_is_region_memory (crashk_res.start, crash_size) || +memblock_reserve (crashk_res.start, crash_size)) { +pr_err ("Failed to reserve memory for crashkernel!\n" ); + crashk_res.start = crashk_res.end =0 ; +return ; + } }int overlaps_crashkernel (unsigned long start,unsigned long size)
Signature · 1 line
2.17.1
PATCH 8/29 x86/tsc: Add missing header to tsc_msr.c
In reply to Sasha LevinFrom: Andy Shevchenko <[email protected]>
[ Upstream commit dbd0fbc76c77daac08ddd245afdcbade0d506e19 ]
Add a missing header otherwise compiler warns about missed prototype:
CC arch/x86/kernel/tsc_msr.oarch/x86/kernel/tsc_msr.c:73:15: warning: no previous prototype for ‘cpu_khz_from_msr’ [-Wmissing-prototypes]
unsigned long cpu_khz_from_msr(void)
^~~~~~~~~~~~~~~~
--- arch/x86/kernel/tsc_msr.c | 1 + 1 file changed, 1 insertion(+)
arch/x86/kernel/tsc_msr.c +1 -0
@@ -21,6 +21,7 @@#include <asm/setup.h> #include <asm/apic.h> #include <asm/param.h> +#include <asm/tsc.h> /* CPU reference clock frequency: in KHz */ #define FREQ_83 83200
Signature · 1 line
2.17.1
PATCH 9/29 scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size
In reply to Sasha LevinFrom: Bart Van Assche <[email protected]>
[ Upstream commit 35bea5c84fd13c643cce63f0b5cd4b148f8c901d ]
--- drivers/target/iscsi/iscsi_target_tpg.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/target/iscsi/iscsi_target_tpg.c +1 -2
@@ -651,8 +651,7 @@ int iscsit_ta_authentication(struct iscsi_portal_group *tpg, u32 authentication) none =strstr (buf1,NONE );if (none) goto out; -strncat (buf1,"," ,strlen ("," )); -strncat (buf1,NONE ,strlen (NONE )); +strlcat (buf1,"," NONE ,sizeof (buf1));if (iscsi_update_param_value (param, buf1) <0 )return -EINVAL ; }
Signature · 1 line
2.17.1
PATCH 10/29 scsi: ibmvscsi: Improve strings handling
In reply to Sasha LevinFrom: Breno Leitao <[email protected]>
[ Upstream commit 1262dc09dc9ae7bf4ad00b6a2c5ed6a6936bcd10 ]
Currently an open firmware property is copied into partition_name variable without keeping a room for \0.
Later one, this variable (partition_name), which is 97 bytes long, is strncpyed into ibmvcsci_host_data->madapter_info->partition_name, which is 96 bytes long, possibly truncating it 'again' and removing the \0.
This patch simply decreases the partition name to 96 and just copy using strlcpy() which guarantees that the string is \0 terminated. I think there is no issue if this there is a truncation in this very first copy, i.e, when the open firmware property is read and copied into the driver for the very first time;
This issue also causes the following warning on GCC 8:
drivers/scsi/ibmvscsi/ibmvscsi.c:281:2: warning: strncpy output may be truncated copying 96 bytes from a string of length 96 [-Wstringop-truncation]
...
inlined from ibmvscsi_probe at drivers/scsi/ibmvscsi/ibmvscsi.c:2221:7:
drivers/scsi/ibmvscsi/ibmvscsi.c:265:3: warning: strncpy specified bound 97 equals destination size [-Wstringop-truncation]
--- drivers/scsi/ibmvscsi/ibmvscsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/ibmvscsi/ibmvscsi.c +2 -2
@@ -93,7 +93,7 @@ static int max_requests = IBMVSCSI_MAX_REQUESTS_DEFAULT;static int max_events =IBMVSCSI_MAX_REQUESTS_DEFAULT +2 ;static int fast_fail =1 ;static int client_reserve =1 ; -static char partition_name[97 ] ="UNKNOWN" ; +static char partition_name[96 ] ="UNKNOWN" ;static unsigned int partition_number =-1 ;static struct scsi_transport_template *ibmvscsi_transport_template;
@@ -261,7 +261,7 @@ static void gather_partition_info(void) ppartition_name =of_get_property (rootdn,"ibm,partition-name" ,NULL );if (ppartition_name) -strncpy (partition_name, ppartition_name, +strlcpy (partition_name, ppartition_name,sizeof (partition_name)); p_number_ptr =of_get_property (rootdn,"ibm,partition-no" ,NULL );if (p_number_ptr)
Signature · 1 line
2.17.1
PATCH 11/29 usb: wusbcore: security: cast sizeof to int for comparison
In reply to Sasha LevinFrom: Julia Lawall <[email protected]>
[ Upstream commit d3ac5598c5010a8999978ebbcca3b1c6188ca36b ]
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. usb_get_descriptor can return a negative error code.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
int x;
expression e,e1;
identifier f;
@@
*x = f(...);
... when != x = e1
when != if (x < 0 || ...) { ... return ...; }*x < sizeof(e)
// </smpl>
--- drivers/usb/wusbcore/security.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/wusbcore/security.c +1 -1
@@ -230,7 +230,7 @@ int wusb_dev_sec_add(struct wusbhc *wusbhc, result =usb_get_descriptor (usb_dev,USB_DT_SECURITY ,0 , secd,sizeof (*secd)); -if (result <sizeof (*secd)) { +if (result < (int )sizeof (*secd)) {dev_err (dev,"Can't read security descriptor or " "not enough data: %d\n" , result); goto out;
Signature · 1 line
2.17.1
PATCH 12/29 alarmtimer: Prevent overflow for relative nanosleep
In reply to Sasha LevinFrom: Thomas Gleixner <[email protected]>
[ Upstream commit 5f936e19cc0ef97dbe3a56e9498922ad5ba1edef ]
Air Icy reported:
UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7 signed integer overflow: 1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int' Call Trace: alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811 __do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline] __se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline] __x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213 do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290
alarm_timer_nsleep() uses ktime_add() to add the current time and the relative expiry value. ktime_add() has no sanity checks so the addition can overflow when the relative timeout is large enough.
Use ktime_add_safe() which has the necessary sanity checks in place and limits the result to the valid range.
--- kernel/time/alarmtimer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/time/alarmtimer.c +2 -1
@@ -776,7 +776,8 @@ static int alarm_timer_nsleep(const clockid_t which_clock, int flags,/* Convert (if necessary) to absolute time */ if (flags !=TIMER_ABSTIME ) {ktime_t now = alarm_bases[type].gettime (); - exp =ktime_add (now, exp); + + exp =ktime_add_safe (now, exp); }if (alarmtimer_do_nsleep (&alarm, exp))
Signature · 1 line
2.17.1
PATCH 13/29 s390/extmem: fix gcc 8 stringop-overflow warning
In reply to Sasha LevinFrom: Vasily Gorbik <[email protected]>
[ Upstream commit 6b2ddf33baec23dace85bd647e3fc4ac070963e8 ]
arch/s390/mm/extmem.c: In function '__segment_load':arch/s390/mm/extmem.c:436:2: warning: 'strncat' specified bound 7 equals source length [-Wstringop-overflow=]
strncat(seg->res_name, " (DCSS)", 7);
What gcc complains about here is the misuse of strncat function, which in this case does not limit a number of bytes taken from "src", so it is in the end the same as strcat(seg->res_name, " (DCSS)");
Keeping in mind that a res_name is 15 bytes, strncat in this case would overflow the buffer and write 0 into alignment byte between the fields in the struct. To avoid that increasing res_name size to 16, and reusing strlcat.
--- arch/s390/mm/extmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/s390/mm/extmem.c +2 -2
@@ -80,7 +80,7 @@ struct qin64 {struct dcss_segment {struct list_head list;char dcss_name[8 ]; -char res_name[15 ]; +char res_name[16 ];unsigned long start_addr;unsigned long end;atomic_t ref_count;
@@ -445,7 +445,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned longmemcpy (&seg->res_name, seg->dcss_name,8 );EBCASC (seg->res_name,8 ); seg->res_name[8 ] ='\0' ; -strncat (seg->res_name," (DCSS)" ,7 ); +strlcat (seg->res_name," (DCSS)" ,sizeof (seg->res_name)); seg->res->name = seg->res_name; rc = seg->vm_segtype; if (rc == SEG_TYPE_SC ||
Signature · 1 line
2.17.1
PATCH 14/29 ALSA: snd-aoa: add of_node_put() in error path
In reply to Sasha LevinFrom: Nicholas Mc Guire <[email protected]>
[ Upstream commit 222bce5eb88d1af656419db04bcd84b2419fb900 ]
Both calls to of_find_node_by_name() and of_get_next_child() return a
node pointer with refcount incremented thus it must be explicidly decremented here after the last usage. As we are assured to have a refcounted np either from the initial of_find_node_by_name(NULL, name); or from the of_get_next_child(gpio, np) in the while loop if we reached the error code path below, an x of_node_put(np) is needed.
--- sound/aoa/core/gpio-feature.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
sound/aoa/core/gpio-feature.c +3 -1
@@ -88,8 +88,10 @@ static struct device_node *get_gpio(char *name, } reg =of_get_property (np,"reg" ,NULL ); -if (!reg) +if (!reg) { +of_node_put (np);return NULL ; + } *gpioptr = *reg;
Signature · 1 line
2.17.1
PATCH 15/29 media: s3c-camif: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power
In reply to Sasha LevinFrom: Akinobu Mita <[email protected]>
[ Upstream commit 30ed2b83343bd1e07884ca7355dac70d25ffc158 ]
When the subdevice doesn't provide s_power core ops callback, the v4l2_subdev_call for s_power returns -ENOIOCTLCMD. If the subdevice doesn't have the special handling for its power saving mode, the s_power isn't required. So -ENOIOCTLCMD from the v4l2_subdev_call should be ignored.
--- drivers/media/platform/s3c-camif/camif-capture.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/media/platform/s3c-camif/camif-capture.c +2 -0
@@ -117,6 +117,8 @@ static int sensor_set_power(struct camif_dev *camif, int on)if (camif->sensor.power_count == !on) err =v4l2_subdev_call (sensor->sd, core, s_power, on); +if (err == -ENOIOCTLCMD ) + err =0 ;if (!err) sensor->power_count += on ?1 :-1 ;
Signature · 1 line
2.17.1
PATCH 16/29 media: soc_camera: ov772x: correct setting of banding filter
In reply to Sasha LevinFrom: Akinobu Mita <[email protected]>
[ Upstream commit 22216ec41e919682c15345e95928f266e8ba6f9e ]
The banding filter ON/OFF is controlled via bit 5 of COM8 register. It is attempted to be enabled in ov772x_set_params() by the following line.
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
But this unexpectedly results disabling the banding filter, because the mask and set bits are exclusive.
On the other hand, ov772x_s_ctrl() correctly sets the bit by:
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);
The same fix was already applied to non-soc_camera version of ov772x driver in the commit commit a024ee14cd36 ("media: ov772x: correct setting of banding filter")
--- drivers/media/i2c/soc_camera/ov772x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/soc_camera/ov772x.c +1 -1
@@ -834,7 +834,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,* set COM8 */ if (priv->band_filter) { - ret =ov772x_mask_set (client,COM8 ,BNDF_ON_OFF ,1 ); + ret =ov772x_mask_set (client,COM8 ,BNDF_ON_OFF ,BNDF_ON_OFF );if (!ret) ret =ov772x_mask_set (client,BDBASE ,0xff ,256 - priv->band_filter);
Signature · 1 line
2.17.1
PATCH 17/29 staging: android: ashmem: Fix mmap size validation
In reply to Sasha LevinFrom: Alistair Strachan <[email protected]>
[ Upstream commit 8632c614565d0c5fdde527889601c018e97b6384 ]
The ashmem driver did not check that the size/offset of the vma passed to its .mmap() function was not larger than the ashmem object being mapped. This could cause mmap() to succeed, even though accessing parts of the mapping would later fail with a segmentation fault.
Ensure an error is returned by the ashmem_mmap() function if the vma size is larger than the ashmem object size. This enables safer handling of the problem in userspace.
--- drivers/staging/android/ashmem.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/staging/android/ashmem.c +6 -0
@@ -370,6 +370,12 @@ static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) goto out; } +/* requested mapping size larger than object size */ +if (vma->vm_end - vma->vm_start >PAGE_ALIGN (asma->size)) { + ret = -EINVAL ; + goto out; + } +/* requested protection bits must match our allowed protection mask */ if (unlikely ((vma->vm_flags & ~calc_vm_prot_bits (asma->prot_mask)) &calc_vm_prot_bits (PROT_MASK ))) {
Signature · 1 line
2.17.1
PATCH 18/29 drivers/tty: add error handling for pcmcia_loop_config
In reply to Sasha LevinFrom: Zhouyang Jia <[email protected]>
[ Upstream commit 85c634e919bd6ef17427f26a52920aeba12e16ee ]
When pcmcia_loop_config fails, the lack of error-handling code may cause unexpected results.
This patch adds error-handling code after calling pcmcia_loop_config.
--- drivers/tty/serial/8250/serial_cs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/tty/serial/8250/serial_cs.c +4 -2
@@ -629,8 +629,10 @@ static int serial_config(struct pcmcia_device * link) (link->has_func_id) && (link->socket->pcmcia_pfc ==0 ) && ((link->func_id ==CISTPL_FUNCID_MULTI ) || - (link->func_id == CISTPL_FUNCID_SERIAL))) -pcmcia_loop_config (link, serial_check_for_multi, info); + (link->func_id == CISTPL_FUNCID_SERIAL))) { + if (pcmcia_loop_config(link, serial_check_for_multi, info)) + goto failed; + }/* * Apply any multi-port quirk.
Signature · 1 line
2.17.1
PATCH 19/29 media: tm6000: add error handling for dvb_register_adapter
In reply to Sasha LevinFrom: Zhouyang Jia <[email protected]>
[ Upstream commit e95d7c6eb94c634852eaa5ff4caf3db05b5d2e86 ]
When dvb_register_adapter fails, the lack of error-handling code may cause unexpected results.
This patch adds error-handling code after calling dvb_register_adapter.
--- drivers/media/usb/tm6000/tm6000-dvb.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/media/usb/tm6000/tm6000-dvb.c +5 -0
@@ -275,6 +275,11 @@ static int register_dvb(struct tm6000_core *dev) ret =dvb_register_adapter (&dvb->adapter,"Trident TVMaster 6000 DVB-T" ,THIS_MODULE , &dev->udev->dev, adapter_nr); +if (ret <0 ) { +pr_err ("tm6000: couldn't register the adapter!\n" ); + goto err; + } + dvb->adapter.priv = dev;if (dvb->frontend) {
Signature · 1 line
2.17.1
PATCH 20/29 ALSA: hda: Add AZX_DCAPS_PM_RUNTIME for AMD Raven Ridge
In reply to Sasha LevinFrom: Kai-Heng Feng <[email protected]>
[ Upstream commit 1adca4b0cd65c14cb8b8c9c257720385869c3d5f ]
This patch can make audio controller in AMD Raven Ridge gets runtime suspended to D3, to save ~1W power when it's not in use.
--- sound/pci/hda/hda_intel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/pci/hda/hda_intel.c +2 -1
@@ -2094,7 +2094,8 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB },/* AMD Raven */ { PCI_DEVICE(0x1022, 0x15e3), - .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB }, + .driver_data =AZX_DRIVER_GENERIC |AZX_DCAPS_PRESET_ATI_SB | + AZX_DCAPS_PM_RUNTIME }, /* ATI HDMI */ { PCI_DEVICE(0x1002, 0x0002), .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS },
Signature · 1 line
2.17.1
PATCH 21/29 rndis_wlan: potential buffer overflow in rndis_wlan_auth_indication()
In reply to Sasha LevinFrom: Dan Carpenter <[email protected]>
[ Upstream commit ae636fb1554833ee5133ca47bf4b2791b6739c52 ]
This is a static checker fix, not something I have tested. The issue is that on the second iteration through the loop, we jump forward by le32_to_cpu(auth_req->length) bytes. The problem is that if the length is more than "buflen" then we end up with a negative "buflen". A negative buflen is type promoted to a high positive value and the loop continues but it's accessing beyond the end of the buffer.
I believe the "auth_req->length" comes from the firmware and if the firmware is malicious or buggy, you're already toasted so the impact of this bug is probably not very severe.
--- drivers/net/wireless/rndis_wlan.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/wireless/rndis_wlan.c +2 -0
@@ -2919,6 +2919,8 @@ static void rndis_wlan_auth_indication(struct usbnet *usbdev,while (buflen >=sizeof (*auth_req)) { auth_req = (void *)buf; +if (buflen <le32_to_cpu (auth_req->length)) +return ; type ="unknown" ; flags =le32_to_cpu (auth_req->flags); pairwise_error = false;
Signature · 1 line
2.17.1
PATCH 22/29 wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()
In reply to Sasha LevinFrom: Tony Lindgren <[email protected]>
[ Upstream commit 4ec7cece87b3ed21ffcd407c62fb2f151a366bc1 ]
Otherwise we can get:
WARNING: CPU: 0 PID: 55 at drivers/net/wireless/ti/wlcore/io.h:84
I've only seen this few times with the runtime PM patches enabled so this one is probably not needed before that. This seems to work currently based on the current PM implementation timer. Let's apply this separately though in case others are hitting this issue.
--- drivers/net/wireless/ti/wlcore/cmd.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/wireless/ti/wlcore/cmd.c +6 -0
@@ -35,6 +35,7 @@#include "wl12xx_80211.h" #include "cmd.h" #include "event.h" +#include "ps.h" #include "tx.h" #include "hw_ops.h"
@@ -187,6 +188,10 @@ int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl, timeout_time = jiffies +msecs_to_jiffies (WL1271_EVENT_TIMEOUT ); + ret =wl1271_ps_elp_wakeup (wl); +if (ret <0 ) +return ret; + do { if (time_after(jiffies, timeout_time)) { wl1271_debug(DEBUG_CMD, "timeout waiting for event %d",
@@ -218,6 +223,7 @@ int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl, }while (!event); out: +wl1271_ps_elp_sleep (wl);kfree (events_vector);return ret; }
Signature · 1 line
2.17.1
PATCH 23/29 ARM: mvebu: declare asm symbols as character arrays in pmsu.c
In reply to Sasha LevinFrom: Ethan Tuttle <[email protected]>
[ Upstream commit d0d378ff451a66e486488eec842e507d28145813 ]
With CONFIG_FORTIFY_SOURCE, memcpy uses the declared size of operands to detect buffer overflows. If src or dest is declared as a char, attempts to copy more than byte will result in a fortify_panic().
Address this problem in mvebu_setup_boot_addr_wa() by declaring mvebu_boot_wa_start and mvebu_boot_wa_end as character arrays. Also remove a couple addressof operators to avoid "arithmetic on pointer to an incomplete type" compiler error.
See commit 54a7d50b9205 ("x86: mark kprobe templates as character arrays, not single characters") for a similar fix.
Fixes "detected buffer overflow in memcpy" error during init on some mvebu systems (armada-370-xp, armada-375):
(fortify_panic) from (mvebu_setup_boot_addr_wa+0xb0/0xb4) (mvebu_setup_boot_addr_wa) from (mvebu_v7_cpu_pm_init+0x154/0x204) (mvebu_v7_cpu_pm_init) from (do_one_initcall+0x7c/0x1a8) (do_one_initcall) from (kernel_init_freeable+0x1bc/0x254) (kernel_init_freeable) from (kernel_init+0x8/0x114) (kernel_init) from (ret_from_fork+0x14/0x2c)
--- arch/arm/mach-mvebu/pmsu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-mvebu/pmsu.c +3 -3
@@ -117,8 +117,8 @@ void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); } -extern unsigned char mvebu_boot_wa_start; -extern unsigned char mvebu_boot_wa_end; +extern unsigned char mvebu_boot_wa_start[]; +extern unsigned char mvebu_boot_wa_end[];/* * This function sets up the boot address workaround needed for SMP
@@ -131,7 +131,7 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, phys_addr_t resume_addr_reg) {void __iomem *sram_virt_base; -u32 code_len = &mvebu_boot_wa_end - &mvebu_boot_wa_start; +u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start;mvebu_mbus_del_window (BOOTROM_BASE ,BOOTROM_SIZE ); mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute,
Signature · 1 line
2.17.1
PATCH 24/29 HID: hid-ntrig: add error handling for sysfs_create_group
In reply to Sasha LevinFrom: Zhouyang Jia <[email protected]>
[ Upstream commit 44d4d51de9a3534a2b63d69efda02a10e66541e4 ]
When sysfs_create_group fails, the lack of error-handling code may cause unexpected results.
This patch adds error-handling code after calling sysfs_create_group.
--- drivers/hid/hid-ntrig.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/hid/hid-ntrig.c +2 -0
@@ -953,6 +953,8 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) ret =sysfs_create_group (&hdev->dev.kobj, &ntrig_attribute_group); +if (ret) +hid_err (hdev,"cannot create sysfs group\n" );return 0 ; err_free:
Signature · 1 line
2.17.1
PATCH 25/29 scsi: bnx2i: add error handling for ioremap_nocache
In reply to Sasha LevinFrom: Zhouyang Jia <[email protected]>
[ Upstream commit aa154ea885eb0c2407457ce9c1538d78c95456fa ]
When ioremap_nocache fails, the lack of error-handling code may cause unexpected results.
This patch adds error-handling code after calling ioremap_nocache.
--- drivers/scsi/bnx2i/bnx2i_hwi.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/bnx2i/bnx2i_hwi.c +2 -0
@@ -2742,6 +2742,8 @@ int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep) BNX2X_DOORBELL_PCI_BAR); reg_off = (1 <<BNX2X_DB_SHIFT ) * (cid_num &0x1FFFF ); ep->qp.ctx_base =ioremap_nocache (reg_base + reg_off,4 ); +if (!ep->qp.ctx_base) +return -ENOMEM ; goto arm_cq; }
Signature · 1 line
2.17.1
PATCH 26/29 audit: Fix extended comparison of GID/EGID
In reply to Sasha LevinFrom: Ondrej Mosnáček <[email protected]>
[ Upstream commit af85d1772e31fed34165a1b3decef340cf4080c0 ]
The audit_filter_rules() function in auditsc.c used the in_[e]group_p() functions to check GID/EGID match, but these functions use the current task's credentials, while the comparison should use the credentials of the task given to audit_filter_rules() as a parameter (tsk).
Note that we can use group_search(cred->group_info, ...) as a replacement for both in_group_p and in_egroup_p as these functions only compare the parameter to cred->fsgid/egid and then call group_search.
In fact, the usage of in_group_p was even more incorrect: it compares to cred->fsgid (which is usually equal to cred->egid) and not cred->gid.
GitHub issue:
https://github.com/linux-audit/audit-kernel/issues/82
--- kernel/auditsc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
kernel/auditsc.c +4 -4
@@ -484,20 +484,20 @@ static int audit_filter_rules(struct task_struct *tsk, result =audit_gid_comparator (cred->gid, f->op, f->gid);if (f->op == Audit_equal) {if (!result) - result =in_group_p (f->gid); + result =groups_search (cred->group_info, f->gid); }else if (f->op == Audit_not_equal) {if (result) - result = !in_group_p (f->gid); + result = !groups_search (cred->group_info, f->gid); }break ;case AUDIT_EGID : result =audit_gid_comparator (cred->egid, f->op, f->gid);if (f->op == Audit_equal) {if (!result) - result =in_egroup_p (f->gid); + result =groups_search (cred->group_info, f->gid); }else if (f->op == Audit_not_equal) {if (result) - result = !in_egroup_p (f->gid); + result = !groups_search (cred->group_info, f->gid); }break ;case AUDIT_SGID :
Signature · 1 line
2.17.1
PATCH 27/29 ASoC: dapm: Fix potential DAI widget pointer deref when linking DAIs
In reply to Sasha LevinFrom: Liam Girdwood <[email protected]>
[ Upstream commit e01b4f624278d5efe5fb5da585ca371947b16680 ]
Sometime a component or topology may configure a DAI widget with no private data leading to a dev_dbg() dereferencne of this data.
Fix this to check for non NULL private data and let users know if widget is missing DAI.
--- sound/soc/soc-dapm.c | 7 +++++++ 1 file changed, 7 insertions(+)
sound/soc/soc-dapm.c +7 -0
@@ -3400,6 +3400,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card)continue ; } +/* let users know there is no DAI to link */ +if (!dai_w->priv) { +dev_dbg (card->dev,"dai widget %s has no DAI\n" , + dai_w->name); +continue ; + } + dai = dai_w->priv;/* ...find all widgets with the same stream and link them */
Signature · 1 line
2.17.1
PATCH 28/29 module: exclude SHN_UNDEF symbols from kallsyms api
In reply to Sasha LevinFrom: Jessica Yu <[email protected]>
[ Upstream commit 9f2d1e68cf4d641def734adaccfc3823d3575e6c ]
Livepatch modules are special in that we preserve their entire symbol tables in order to be able to apply relocations after module load. The unwanted side effect of this is that undefined (SHN_UNDEF) symbols of livepatch modules are accessible via the kallsyms api and this can confuse symbol resolution in livepatch (klp_find_object_symbol()) and cause subtle bugs in livepatch.
Have the module kallsyms api skip over SHN_UNDEF symbols. These symbols are usually not available for normal modules anyway as we cut down their symbol tables to just the core (non-undefined) symbols, so this should really just affect livepatch modules. Note that this patch doesn't affect the display of undefined symbols in /proc/kallsyms.
--- kernel/module.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
kernel/module.c +5 -1
@@ -3592,7 +3592,7 @@ static unsigned long mod_find_symname(struct module *mod, const char *name)for (i =0 ; i < kallsyms->num_symtab; i++)if (strcmp (name,symname (kallsyms, i)) ==0 && - kallsyms->symtab[i].st_info !='U' ) + kallsyms->symtab[i].st_shndx !=SHN_UNDEF )return kallsyms->symtab[i].st_value;return 0 ; }
@@ -3636,6 +3636,10 @@ int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *,if (mod->state ==MODULE_STATE_UNFORMED )continue ;for (i =0 ; i < kallsyms->num_symtab; i++) { + +if (kallsyms->symtab[i].st_shndx ==SHN_UNDEF ) +continue ; + ret =fn (data,symname (kallsyms, i), mod, kallsyms->symtab[i].st_value);if (ret !=0 )
Signature · 1 line
2.17.1
PATCH 29/29 nfsd: fix corrupted reply to badly ordered compound
In reply to Sasha LevinFrom: "J. Bruce Fields" <[email protected]>
[ Upstream commit 5b7b15aee641904ae269be9846610a3950cbd64c ]
We're encoding a single op in the reply but leaving the number of ops zero, so the reply makes no sense.
Somewhat academic as this isn't a case any real client will hit, though in theory perhaps that could change in a future protocol extension.
--- fs/nfsd/nfs4proc.c | 1 + 1 file changed, 1 insertion(+)
fs/nfsd/nfs4proc.c +1 -0
@@ -1347,6 +1347,7 @@ nfsd4_proc_compound(struct svc_rqst *rqstp,if (status) { op = &args->ops[0 ]; op->status = status; + resp->opcnt =1 ; goto encode_op; }
Signature · 1 line
2.17.1