ARM: omap3_logic: Enable DM_PMIC and DM_REGULATOR
PATCH 1/1 ARM: omap3_logic: Enable DM_PMIC and DM_REGULATOR
Enabling DM_PMIC, DM_REGULATOR_FIXED, and DM_REGULATOR_GPIO gives us the ability to better monitor voltages and enable hardware through the device tree. The TL4030 (TPS65950) is not yet migrated to DM, so this patch only enables the fixed and GPIO controlled regulators.
Signed-off-by Adam Ford <[email protected]>
configs/omap3_logic_defconfig +5 -0
@@ -50,6 +50,11 @@ CONFIG_SMC911X_BASE=0x08000000 CONFIG_SMC911X_32_BIT=y CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y +CONFIG_DM_PMIC=y +# CONFIG_SPL_PMIC_CHILDREN is not set +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_SYS_NS16550=y CONFIG_SPI=y
Signature · 1 line
2.17.1
configs/omap3_logic_defconfig
Quoted 10 lines · Adam Ford
Enabling
DM_PMIC,DM_REGULATOR_FIXED, andDM_REGULATOR_GPIOgives us the ability to better monitor voltages and enable hardware through the device tree. The TL4030 (TPS65950) is not yet migrated to DM, so this patch only enables the fixed and GPIO controlled regulators.Signed-off-by Adam Ford <[email protected]>configs/omap3_logic_defconfig +0
-0
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180918/a2d08aad/attachment.sig>