ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
PATCH 1/1 ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
HP 6730b laptop has an ethernet NIC connected to one of the PCIe root ports. The root ports itself are native PCIe hotplug capable. Now, during boot after PCI devices are scanned the BIOS triggers ACPI bus check directly to the NIC:
[ 0.942239] ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event()
It is not clear why it is sending bus check but regardless the ACPI hotplug notify handler calls enable_slot() directly (instead of going through acpiphp_check_bridge() as there is no bridge) which ends up handling special case for non-hotplug bridges with native PCIe hotplug. This results a crash of some kind but the reporter only sees black screen so it is hard to figure out the exact spot and what actually happens. Based on few fix proposals it was tracked to crash somewhere inside pci_assign_unassigned_bridge_resources().
In any case we should not really be in that special branch at all because the ACPI notify happened to a slot that is not a PCI bridge (it is just a regular PCI device).
Fix this so that we only go to that special branch if we are calling enable_slot() for a bridge (e.g the ACPI notification was for the bridge).
--- drivers/pci/hotplug/acpiphp_glue.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/pci/hotplug/acpiphp_glue.c +8 -5
@@ -457,17 +457,20 @@ static void acpiphp_native_scan_bridge(struct pci_dev *bridge)/** * enable_slot - enable, configure a slot * @slot: slot to be enabled +* @bridge: Bridge if the hotplug was directly to the bridge. %NULL +* otherwise. * * This function should be called per *physical slot*, * not per each slot object in ACPI namespace. */ -static void enable_slot (struct acpiphp_slot *slot) +static void enable_slot (struct acpiphp_slot *slot, +const struct acpiphp_bridge *bridge) {struct pci_dev *dev;struct pci_bus *bus = slot->bus;struct acpiphp_func *func; -if (bus->self &&hotplug_is_native (bus->self)) { +if (bridge && bus->self &&hotplug_is_native (bus->self)) {/* * If native hotplug is used, it will take care of hotplug * slot management and resource allocation for hotplug
@@ -701,7 +704,7 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)trim_stale_devices (dev);/* configure all functions */ -enable_slot (slot); +enable_slot (slot, bridge); }else {disable_slot (slot); }
@@ -785,7 +788,7 @@ static void hotplug_event(u32 type, struct acpiphp_context *context)if (bridge)acpiphp_check_bridge (bridge);else if (!(slot->flags &SLOT_IS_GOING_AWAY )) -enable_slot (slot); +enable_slot (slot,NULL );break ;
@@ -973,7 +976,7 @@ int acpiphp_enable_slot(struct acpiphp_slot *slot)/* configure all functions */ if (!(slot->flags &SLOT_ENABLED )) -enable_slot (slot); +enable_slot (slot,NULL );pci_unlock_rescan_remove ();return 0 ;
Signature · 1 line
2.18.0
Rafael J. Wysocki
maintainerQuoted 46 lines · Mika Westerberg
HP 6730b laptop has an ethernet NIC connected to one of the PCIe root ports. The root ports itself are native PCIe hotplug capable. Now, during boot after PCI devices are scanned the BIOS triggers ACPI bus check directly to the NIC:
[ 0.942239] ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event()It is not clear why it is sending bus check but regardless the ACPI hotplug notify handler calls
enable_slot()directly (instead of going throughacpiphp_check_bridge()as there is no bridge) which ends up handling special case for non-hotplug bridges with native PCIe hotplug. This results a crash of some kind but the reporter only sees black screen so it is hard to figure out the exact spot and what actually happens. Based on few fix proposals it was tracked to crash somewhere insidepci_assign_unassigned_bridge_resources().In any case we should not really be in that special branch at all because the ACPI notify happened to a slot that is not a PCI bridge (it is just a regular PCI device).
Fix this so that we only go to that special branch if we are calling
enable_slot()for a bridge (e.g the ACPI notification was for the bridge).Fixes 84c8b58ed3ad ACPI / hotplug / PCI: Don't scan bridges managed by native hotplugReported-by Peter Anemone <[email protected]>Signed-off-by Mika Westerberg <[email protected]>--- drivers/pci/hotplug/acpiphp_glue.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)drivers/pci/hotplug/acpiphp_glue.c +2
-0@@ -457,17 +457,20 @@ static void acpiphp_native_scan_bridge(struct pci_dev *bridge)/** * enable_slot - enable, configure a slot * @slot: slot to be enabled +* @bridge: Bridge if the hotplug was directly to the bridge. %NULL +* otherwise. * * This function should be called per *physical slot*, * not per each slot object in ACPI namespace. */
drivers/pci/hotplug/acpiphp_glue.c static void acpiphp_native_scan_bridge(struct pci_dev *bridge) · line 473
Quoted 10 lines
drivers/pci/hotplug/acpiphp_glue.c +3
-2-static void enable_slot (struct acpiphp_slot *slot) +static void enable_slot (struct acpiphp_slot *slot, +const struct acpiphp_bridge *bridge) {struct pci_dev *dev;struct pci_bus *bus = slot->bus;struct acpiphp_func *func; -if (bus->self &&hotplug_is_native (bus->self)) { +if (bridge && bus->self &&hotplug_is_native (bus->self)) {
AFAICS "bridge" is used as a bool here. What would be wrong with using the bool data type for this arg?
Quoted 33 lines
drivers/pci/hotplug/acpiphp_glue.c +3
-4/* * If native hotplug is used, it will take care of hotplug * slot management and resource allocation for hotplug @@ -701,7 +704,7 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge)trim_stale_devices (dev);/* configure all functions */ -enable_slot (slot); +enable_slot (slot, bridge); }else {disable_slot (slot); }@@ -785,7 +788,7 @@ static void hotplug_event(u32 type, struct acpiphp_context *context)if (bridge)acpiphp_check_bridge (bridge);else if (!(slot->flags &SLOT_IS_GOING_AWAY )) -enable_slot (slot); +enable_slot (slot,NULL );break ;@@ -973,7 +976,7 @@ int acpiphp_enable_slot(struct acpiphp_slot *slot)/* configure all functions */ if (!(slot->flags &SLOT_ENABLED )) -enable_slot (slot); +enable_slot (slot,NULL );pci_unlock_rescan_remove ();return 0 ; --2.18.0
Quoted 56 lines · Rafael J. Wysocki
Quoted 54 lines · Mika Westerberg
HP 6730b laptop has an ethernet NIC connected to one of the PCIe root ports. The root ports itself are native PCIe hotplug capable. Now, during boot after PCI devices are scanned the BIOS triggers ACPI bus check directly to the NIC:
[ 0.942239] ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event()It is not clear why it is sending bus check but regardless the ACPI hotplug notify handler calls
enable_slot()directly (instead of going throughacpiphp_check_bridge()as there is no bridge) which ends up handling special case for non-hotplug bridges with native PCIe hotplug. This results a crash of some kind but the reporter only sees black screen so it is hard to figure out the exact spot and what actually happens. Based on few fix proposals it was tracked to crash somewhere insidepci_assign_unassigned_bridge_resources().In any case we should not really be in that special branch at all because the ACPI notify happened to a slot that is not a PCI bridge (it is just a regular PCI device).
Fix this so that we only go to that special branch if we are calling
enable_slot()for a bridge (e.g the ACPI notification was for the bridge).Fixes 84c8b58ed3ad ACPI / hotplug / PCI: Don't scan bridges managed by native hotplugReported-by Peter Anemone <[email protected]>Signed-off-by Mika Westerberg <[email protected]>--- drivers/pci/hotplug/acpiphp_glue.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)drivers/pci/hotplug/acpiphp_glue.c +4
-1@@ -457,17 +457,20 @@ static void acpiphp_native_scan_bridge(struct pci_dev *bridge)/** * enable_slot - enable, configure a slot * @slot: slot to be enabled +* @bridge: Bridge if the hotplug was directly to the bridge. %NULL +* otherwise. * * This function should be called per *physical slot*, * not per each slot object in ACPI namespace. */ -static void enable_slot (struct acpiphp_slot *slot) +static void enable_slot (struct acpiphp_slot *slot, +const struct acpiphp_bridge *bridge) {struct pci_dev *dev;struct pci_bus *bus = slot->bus;struct acpiphp_func *func;
Quoted 5 lines
drivers/pci/hotplug/acpiphp_glue.c static void acpiphp_native_scan_bridge(struct pci_dev *bridge) · line 473
Quoted 2 lines
drivers/pci/hotplug/acpiphp_glue.c +1
-1-if (bus->self &&hotplug_is_native (bus->self)) { +if (bridge && bus->self &&hotplug_is_native (bus->self)) {AFAICS "bridge" is used as a bool here. What would be wrong with using the bool data type for this arg?
Nothing wrong with that :) I'll change it.
Thanks!