Skip to contentSkip to conversation

power: reset: qcom-pon: Add pms405 pon support

PATCH In review Bjorn Andersson 2 participants 2 messages Sep 20, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 power: reset: qcom-pon: Add pms405 pon support

From: Vinod Koul <[email protected]>

Update the binding and driver for pms405 pon.

---
 Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 5 ++++-
 drivers/power/reset/qcom-pon.c                             | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/power/reset/qcom,pon.txt +4 -1
index 651491bb63b7..5705f575862d 100644
@@ -6,7 +6,10 @@ and resin along with the Android reboot-mode.
 This DT node has pwrkey and resin as sub nodes.
 
 Required Properties:
--compatible: "qcom,pm8916-pon"
+-compatible: Must be one of:
+	"qcom,pm8916-pon"
+	"qcom,pms405-pon"
+
 -reg: Specifies the physical address of the pon register
 
 Optional subnode:
drivers/power/reset/qcom-pon.c +1 -0
index 0c4caaa7e88f..3fa1642d4c54 100644
@@ -74,6 +74,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
 
 static const struct of_device_id pm8916_pon_id_table[] = {
 	{ .compatible = "qcom,pm8916-pon" },
+	{ .compatible = "qcom,pms405-pon" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
Signature · 1 line
2.18.0
#1 lore raw

Hi,

Quoted 7 lines · Bjorn Andersson

From: Vinod Koul <[email protected]>

Update the binding and driver for pms405 pon.

---

Thanks, queued.

-- Sebastian

Quoted 35 lines
 Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 5 ++++-
 drivers/power/reset/qcom-pon.c                             | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/power/reset/qcom,pon.txt +4 -1
index 651491bb63b7..5705f575862d 100644
@@ -6,7 +6,10 @@ and resin along with the Android reboot-mode.
 This DT node has pwrkey and resin as sub nodes.
 
 Required Properties:
--compatible: "qcom,pm8916-pon"
+-compatible: Must be one of:
+	"qcom,pm8916-pon"
+	"qcom,pms405-pon"
+
 -reg: Specifies the physical address of the pon register
 
 Optional subnode:
drivers/power/reset/qcom-pon.c +1 -0
index 0c4caaa7e88f..3fa1642d4c54 100644
@@ -74,6 +74,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
 
 static const struct of_device_id pm8916_pon_id_table[] = {
 	{ .compatible = "qcom,pm8916-pon" },
+	{ .compatible = "qcom,pms405-pon" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
Signature · 1 line
2.18.0