platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
Subsystems (2)
PATCH 8/12 platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port
Assigning the mux to the USB Type-C port on top of fusb302. That will prepare this driver for the change in the USB Type-C class code, where the class driver will assume the muxes to be always assigned to the ports and not the controllers.
Once the USB Type-C class driver has been updated, the connections between the mux and fusb302 can be dropped.
Acked-by Andy Shevchenko <[email protected]>
Acked-by Hans de Goede <[email protected]>
Tested-by Hans de Goede <[email protected]>
Signed-off-by Heikki Krogerus <[email protected]>
--- drivers/platform/x86/intel_cht_int33fe.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/platform/x86/intel_cht_int33fe.c +11 -1
@@ -34,7 +34,7 @@ struct cht_int33fe_data {struct i2c_client *fusb302;struct i2c_client *pi3usb30532;/* Contain a list-head must be per device */ -struct device_connection connections[5 ]; +struct device_connection connections[8 ]; };/*
@@ -187,6 +187,16 @@ static int cht_int33fe_probe(struct i2c_client *client) data->connections[3 ].endpoint[1 ] ="intel_xhci_usb_sw-role-switch" ; data->connections[3 ].id ="usb-role-switch" ; + data->connections[4 ].endpoint[0 ] ="port0" ; + data->connections[4 ].endpoint[1 ] ="i2c-pi3usb30532" ; + data->connections[4 ].id ="typec-switch" ; + data->connections[5 ].endpoint[0 ] ="port0" ; + data->connections[5 ].endpoint[1 ] ="i2c-pi3usb30532" ; + data->connections[5 ].id ="typec-mux" ; + data->connections[6 ].endpoint[0 ] ="port0" ; + data->connections[6 ].endpoint[1 ] ="i2c-pi3usb30532" ; + data->connections[6 ].id ="idff01m01" ; +device_connections_add (data->connections);memset (&board_info,0 ,sizeof (board_info));