Skip to contentSkip to conversation

powerpc/fsl/dts: add missing P4080DS I2C devices

PATCH Applied David Lamparter 2 participants 2 messages Sep 20, 2018 – Aug 2, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc/fsl/dts: add missing P4080DS I2C devices

This just adds the zl2006 voltage regulators / power monitors and the onboard I2C eeproms. The ICS9FG108 clock chip doesn't seem to have a driver, so it is left in the DTS as a comment. And for good measure, the SPD eeproms are tagged as such.

---
I'm not subscribed to linuxppc-dev, please keep me in Cc:.

---
 arch/powerpc/boot/dts/fsl/p4080ds.dts | 43 +++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)
arch/powerpc/boot/dts/fsl/p4080ds.dts +41 -2
index 65e20152e22f..969b32c4f2d5 100644
@@ -125,11 +125,11 @@
 
 		i2c@118100 {
 			eeprom@51 {
-				compatible = "atmel,24c256";
+				compatible = "atmel,spd";
 				reg = <0x51>;
 			};
 			eeprom@52 {
-				compatible = "atmel,24c256";
+				compatible = "atmel,spd";
 				reg = <0x52>;
 			};
 			rtc@68 {
@@ -143,6 +143,45 @@
 			};
 		};
 
+		i2c@118000 {
+			zl2006@21 {
+				compatible = "zl2006";
+				reg = <0x21>;
+			};
+			zl2006@22 {
+				compatible = "zl2006";
+				reg = <0x22>;
+			};
+			zl2006@23 {
+				compatible = "zl2006";
+				reg = <0x23>;
+			};
+			zl2006@24 {
+				compatible = "zl2006";
+				reg = <0x24>;
+			};
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+			eeprom@55 {
+				compatible = "atmel,24c64";
+				reg = <0x55>;
+			};
+			eeprom@56 {
+				compatible = "atmel,24c64";
+				reg = <0x56>;
+			};
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+		};
+
+		i2c@119100 {
+			/* 0x6E: ICS9FG108 */
+		};
+
 		usb0: usb@210000 {
 			phy_type = "ulpi";
 		};
Signature · 1 line
2.18.0
#1 lore raw
Quoted 4 lines · David Lamparter

This just adds the zl2006 voltage regulators / power monitors and the onboard I2C eeproms. The ICS9FG108 clock chip doesn't seem to have a driver, so it is left in the DTS as a comment. And for good measure, the SPD eeproms are tagged as such.

Applied to powerpc/next.

[1/1] powerpc/fsl/dts: add missing P4080DS I2C devices

      https://git.kernel.org/powerpc/c/d3c61954fc1827df571e235b9a98e10108ef5c3d

cheers