ASoC: cs4265: Add a MIC pre. route
Subsystems (3)
PATCH 1/1 ASoC: cs4265: Add a MIC pre. route
The cs4265 driver is missing a microphone preamp enable. This patch enables/disables the microphone preamp when mic selection is made using the kcontrol.
Signed-off-by Matt Flax <[email protected]>
--- sound/soc/codecs/cs4265.c | 4 ++++ 1 file changed, 4 insertions(+)
sound/soc/codecs/cs4265.c +4 -0
@@ -230,6 +230,10 @@ static const struct snd_soc_dapm_route cs4265_audio_map[] = { {"DAI1 Capture", NULL, "DOUT"}, {"DAI2 Capture", NULL, "DOUT"}, + { "Pre-amp MIC", NULL, "MICL" }, + { "Pre-amp MIC", NULL, "MICR" }, + { "ADC Mux", "MIC", "Pre-amp MIC" }, +/* Loopback */ {"Loopback", "Switch", "ADC"}, {"DAC", NULL, "Loopback"},
Signature · 1 line
2.17.1
Quoted 14 lines · Matt Flax
The cs4265 driver is missing a microphone preamp enable. This patch enables/disables the microphone preamp when mic selection is made using the kcontrol.
Signed-off-by Matt Flax <[email protected]>--- sound/soc/codecs/cs4265.c | 4 ++++ 1 file changed, 4 insertions(+)sound/soc/codecs/cs4265.c +0
-0
sound/soc/codecs/cs4265.c static const struct snd_soc_dapm_route cs4265_audio_map[] = { · line 236
Quoted 7 lines
sound/soc/codecs/cs4265.c +4
-0@@ -230,6 +230,10 @@ static const struct snd_soc_dapm_route cs4265_audio_map[] = { {"DAI1 Capture", NULL, "DOUT"}, {"DAI2 Capture", NULL, "DOUT"}, + { "Pre-amp MIC", NULL, "MICL" }, + { "Pre-amp MIC", NULL, "MICR" }, + { "ADC Mux", "MIC", "Pre-amp MIC" }, +
This looks good but I think you should also remove the existing routes that put the mic straight into the ADC Mux.
{"ADC Mux", "MIC", "MICL"},
{"ADC Mux", "MIC", "MICR"},
Thanks,
Charles