arm64: dts: ls1012a: Add FRWY-LS1012A board support
Subsystems (2)
PATCH 1/1 arm64: dts: ls1012a: Add FRWY-LS1012A board support
From: Bhaskar Upadhaya <[email protected]>
FRWY-LS1012A is a different design from LS1012A-FRDM, but has some common SoC features. Key feature on this board is Micro SD, USB 3.0, DDR, UART.
---
changes in v1:
1. fix license identifier
2. remove pcie node
arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1012a-frwy.dts | 26 +++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts new file +26 -0
@@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Freescale LS1012A FRWY Board. + * + * Copyright 2018 NXP + * + * Pramod Kumar <[email protected]> + * + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A FRWY Board"; + compatible = "fsl,frwy-ls1012a", "fsl,ls1012a"; + +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +};
Signature · 1 line
2.17.1
PATCH 1/1 arm64: dts: ls1012a: Add FRWY-LS1012A board support
Please copy Li Yang <[email protected]> who has been added to MAINTAINERS as co-maintainer for LayerScape platform.
Quoted 3 lines · Pramod Kumar
From: Bhaskar Upadhaya <[email protected]>
FRWY-LS1012A is a different design from LS1012A-FRDM,
LS1012A-FRWY is more consistent?
Quoted 20 lines
but has some common SoC features. Key feature on this board is Micro SD, USB 3.0, DDR, UART.
Signed-off-by Bhaskar Upadhaya <[email protected]>Signed-off-by Pramod Kumar <[email protected]>---
changes in v1:
1. fix license identifier
2. remove pcie nodearch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1012a-frwy.dts | 26 +++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dtsarch/arm64/boot/dts/freescale/Makefile +0
-0
arch/arm64/boot/dts/freescale/Makefile line 2
Quoted 2 lines
arch/arm64/boot/dts/freescale/Makefile +1
-0@@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
In alphabetic order, it should go after fsl-ls1012a-frdm.dtb.
Quoted 15 lines
arch/arm64/boot/dts/freescale/Makefile +0
-0dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtbarch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts new file +6
-0@@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Freescale LS1012A FRWY Board. + * + * Copyright 2018 NXP + *
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts line 16
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts new file +10
-0+ * Pramod Kumar <[email protected]> + * + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A FRWY Board"; + compatible = "fsl,frwy-ls1012a", "fsl,ls1012a";
I think fsl,<soc>-xxx is the idiomatic approach we define a compatible. Also the board compatible should be documented.
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts line 17
Quoted 1 line
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts new file +1
-0+
Unneeded newline.
Shawn
Quoted 17 lines
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts new file +9
-0+}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +};Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel at lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel