Skip to contentSkip to conversation

Update and move Dell drivers dell_rbu and dcdbas

PATCH Superseded Stuart Hayes 3 participants 10 messages Sep 25, 2018 – Sep 26, 2018 x86 platform drivers

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Update and move Dell drivers dell_rbu and dcdbas

From: Stuart Hayes <[email protected]>

The dell_rbu and dcdbas drivers need some changes, and should be moved to drivers/platform/x86. Additionally, dell_rbu needs a maintainer, and the listed maintainer for dcdbas is inactive and needs to be changed.

Stuart Hayes (5):
firmware: dell_rbu: Make payload memory uncachable
firmware: dcdbas: Add support for WSMT ACPI table
firmware: dell_rbu: Move dell_rbu to drivers/platform/x86
firmware: dcdbas: Move dcdbas to drivers/platform/x86
MAINTAINERS: Update maintainer for dcdbas and dell_rbu

 MAINTAINERS                                   |  11 +-
 drivers/firmware/Kconfig                      |  28 ----
 drivers/firmware/Makefile                     |   2 -
 drivers/platform/x86/Kconfig                  |  28 ++++
 drivers/platform/x86/Makefile                 |   2 +
 drivers/{firmware => platform/x86}/dcdbas.c   | 123 +++++++++++++++++-
 drivers/{firmware => platform/x86}/dcdbas.h   |  10 ++
 drivers/platform/x86/dell-smbios-smm.c        |   2 +-
 drivers/{firmware => platform/x86}/dell_rbu.c |   8 ++
 9 files changed, 175 insertions(+), 39 deletions(-)
 rename drivers/{firmware => platform/x86}/dcdbas.c (82%)
 rename drivers/{firmware => platform/x86}/dcdbas.h (93%)
 rename drivers/{firmware => platform/x86}/dell_rbu.c (98%)
Signature · 1 line
2.19.0.221.g150f307af
#1 lore raw

PATCH 1/5 firmware: dell_rbu: Make payload memory uncachable

From: Stuart Hayes <[email protected]>

The dell_rbu driver takes firmware update payloads and puts them in memory so the system BIOS can find them after a reboot. This sometimes fails (though rarely), because the memory containing the payload is in the CPU cache but never gets written back to main memory before the system is rebooted (CPU cache contents are lost on reboot).

With this patch, the payload memory will be changed to uncachable to ensure that the payload is actually in main memory before the system is rebooted.

---
This patch has been discussed previously, see history at
https://patchwork.kernel.org/patch/10512079/

 drivers/firmware/dell_rbu.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/firmware/dell_rbu.c +8 -0
index fb8af5cb7c9b..ccefa84f7305 100644
@@ -45,6 +45,7 @@
 #include <linux/moduleparam.h>
 #include <linux/firmware.h>
 #include <linux/dma-mapping.h>
+#include <asm/set_memory.h>
 
 MODULE_AUTHOR("Abhay Salunke <[email protected]>");
 MODULE_DESCRIPTION("Driver for updating BIOS image on DELL systems");
@@ -181,6 +182,11 @@ static int create_packet(void *data, size_t length)
 			packet_data_temp_buf = NULL;
 		}
 	}
+	/*
+	 * set to uncachable or it may never get written back before reboot
+	 */
+	set_memory_uc((unsigned long)packet_data_temp_buf, 1 << ordernum);
+
 	spin_lock(&rbu_data.lock);
 
 	newpacket->data = packet_data_temp_buf;
@@ -349,6 +355,8 @@ static void packet_empty_list(void)
 		 * to make sure there are no stale RBU packets left in memory
 		 */
 		memset(newpacket->data, 0, rbu_data.packetsize);
+		set_memory_wb((unsigned long)newpacket->data,
+			1 << newpacket->ordernum);
 		free_pages((unsigned long) newpacket->data,
 			newpacket->ordernum);
 		kfree(newpacket);
Signature · 1 line
2.19.0.221.g150f307af
#2 lore raw

PATCH 2/5 firmware: dcdbas: Add support for WSMT ACPI table

In reply to Stuart Hayes

From: Stuart Hayes <[email protected]>

If the WSMT ACPI table is present and indicates that a fixed communication buffer should be used, use the firmware-specified buffer instead of allocating a buffer in memory for communications between the dcdbas driver and firmare.

---
This patch has been discussed previously, see history at
https://lore.kernel.org/patchwork/patch/958893/

 drivers/firmware/dcdbas.c | 123 ++++++++++++++++++++++++++++++++++++--
 drivers/firmware/dcdbas.h |  10 ++++
 2 files changed, 127 insertions(+), 6 deletions(-)
drivers/firmware/dcdbas.c +117 -6
index 0bdea60c65dd..ae28e48ff7dc 100644
@@ -21,6 +21,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/acpi.h>
 #include <linux/dma-mapping.h>
 #include <linux/errno.h>
 #include <linux/cpu.h>
@@ -41,7 +42,7 @@
 #include "dcdbas.h"
 
 #define DRIVER_NAME		"dcdbas"
-#define DRIVER_VERSION		"5.6.0-3.2"
+#define DRIVER_VERSION		"5.6.0-3.3"
 #define DRIVER_DESCRIPTION	"Dell Systems Management Base Driver"
 
 static struct platform_device *dcdbas_pdev;
@@ -49,19 +50,23 @@ static struct platform_device *dcdbas_pdev;
 static u8 *smi_data_buf;
 static dma_addr_t smi_data_buf_handle;
 static unsigned long smi_data_buf_size;
+static unsigned long max_smi_data_buf_size = MAX_SMI_DATA_BUF_SIZE;
 static u32 smi_data_buf_phys_addr;
 static DEFINE_MUTEX(smi_data_lock);
+static u8 *eps_buffer;
 
 static unsigned int host_control_action;
 static unsigned int host_control_smi_type;
 static unsigned int host_control_on_shutdown;
 
+static bool wsmt_enabled;
+
 /**
  * smi_data_buf_free: free SMI data buffer
  */
 static void smi_data_buf_free(void)
 {
-	if (!smi_data_buf)
+	if (!smi_data_buf || wsmt_enabled)
 		return;
 
 	dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n",
@@ -86,7 +91,7 @@ static int smi_data_buf_realloc(unsigned long size)
 	if (smi_data_buf_size >= size)
 		return 0;
 
-	if (size > MAX_SMI_DATA_BUF_SIZE)
+	if (size > max_smi_data_buf_size)
 		return -EINVAL;
 
 	/* new buffer is needed */
@@ -169,7 +174,7 @@ static ssize_t smi_data_write(struct file *filp, struct kobject *kobj,
 {
 	ssize_t ret;
 
-	if ((pos + count) > MAX_SMI_DATA_BUF_SIZE)
+	if ((pos + count) > max_smi_data_buf_size)
 		return -EINVAL;
 
 	mutex_lock(&smi_data_lock);
@@ -322,8 +327,20 @@ static ssize_t smi_request_store(struct device *dev,
 			ret = count;
 		break;
 	case 1:
-		/* Calling Interface SMI */
-		smi_cmd->ebx = (u32) virt_to_phys(smi_cmd->command_buffer);
+		/*
+		 * Calling Interface SMI
+		 *
+		 * Provide physical address of command buffer field within
+		 * the struct smi_cmd to BIOS.
+		 *
+		 * Because the address that smi_cmd (smi_data_buf) points to
+		 * will be from memremap() of a non-memory address if WSMT
+		 * is present, we can't use virt_to_phys() on smi_cmd, so
+		 * we have to use the physical address that was saved when
+		 * the virtual address for smi_cmd was received.
+		 */
+		smi_cmd->ebx = smi_data_buf_phys_addr +
+				offsetof(struct smi_cmd, command_buffer);
 		ret = dcdbas_smi_request(smi_cmd);
 		if (!ret)
 			ret = count;
@@ -482,6 +499,93 @@ static void dcdbas_host_control(void)
 	}
 }
 
+/* WSMT */
+
+static u8 checksum(u8 *buffer, u8 length)
+{
+	u8 sum = 0;
+	u8 *end = buffer + length;
+
+	while (buffer < end)
+		sum += *buffer++;
+	return sum;
+}
+
+static inline struct smm_eps_table *check_eps_table(u8 *addr)
+{
+	struct smm_eps_table *eps = (struct smm_eps_table *)addr;
+
+	if (strncmp(eps->smm_comm_buff_anchor, SMM_EPS_SIG, 4) != 0)
+		return NULL;
+
+	if (checksum(addr, eps->length) != 0)
+		return NULL;
+
+	return eps;
+}
+
+static int dcdbas_check_wsmt(void)
+{
+	struct acpi_table_wsmt *wsmt = NULL;
+	struct smm_eps_table *eps = NULL;
+	u64 remap_size;
+	u8 *addr;
+
+	acpi_get_table(ACPI_SIG_WSMT, 0, (struct acpi_table_header **)&wsmt);
+	if (!wsmt)
+		return 0;
+
+	/* Check if WSMT ACPI table shows that protection is enabled */
+	if (!(wsmt->protection_flags & ACPI_WSMT_FIXED_COMM_BUFFERS) ||
+	    !(wsmt->protection_flags & ACPI_WSMT_COMM_BUFFER_NESTED_PTR_PROTECTION))
+		return 0;
+
+	/* Scan for EPS (entry point structure) */
+	for (addr = (u8 *)__va(0xf0000);
+	     addr < (u8 *)__va(0x100000 - sizeof(struct smm_eps_table));
+	     addr += 16) {
+		eps = check_eps_table(addr);
+		if (eps)
+			break;
+	}
+
+	if (!eps) {
+		dev_dbg(&dcdbas_pdev->dev, "found WSMT, but no EPS found\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Get physical address of buffer and map to virtual address.
+	 * Table gives size in 4K pages, regardless of actual system page size.
+	 */
+	if (upper_32_bits(eps->smm_comm_buff_addr + 8)) {
+		dev_warn(&dcdbas_pdev->dev, "found WSMT, but EPS buffer address is above 4GB\n");
+		return -EINVAL;
+	}
+	/*
+	 * Limit remap size to MAX_SMI_DATA_BUF_SIZE + 8 (since the first 8
+	 * bytes are used for a semaphore, not the data buffer itself).
+	 */
+	remap_size = eps->num_of_4k_pages * PAGE_SIZE;
+	if (remap_size > MAX_SMI_DATA_BUF_SIZE + 8)
+		remap_size = MAX_SMI_DATA_BUF_SIZE + 8;
+	eps_buffer = memremap(eps->smm_comm_buff_addr, remap_size, MEMREMAP_WB);
+	if (!eps_buffer) {
+		dev_warn(&dcdbas_pdev->dev, "found WSMT, but failed to map EPS buffer\n");
+		return -ENOMEM;
+	}
+
+	/* First 8 bytes is for a semaphore, not part of the smi_data_buf */
+	smi_data_buf_phys_addr = eps->smm_comm_buff_addr + 8;
+	smi_data_buf = eps_buffer + 8;
+	smi_data_buf_size = remap_size - 8;
+	max_smi_data_buf_size = smi_data_buf_size;
+	wsmt_enabled = true;
+	dev_info(&dcdbas_pdev->dev,
+		 "WSMT found, using firmware-provided SMI buffer.\n");
+	return 1;
+}
+
 /**
  * dcdbas_reboot_notify: handle reboot notification for host control
  */
@@ -548,6 +652,11 @@ static int dcdbas_probe(struct platform_device *dev)
 
 	dcdbas_pdev = dev;
 
+	/* Check if ACPI WSMT table specifies protected SMI buffer address */
+	error = dcdbas_check_wsmt();
+	if (error < 0)
+		return error;
+
 	/*
 	 * BIOS SMI calls require buffer addresses be in 32-bit address space.
 	 * This is done by setting the DMA mask below.
@@ -635,6 +744,8 @@ static void __exit dcdbas_exit(void)
 	 */
 	if (dcdbas_pdev)
 		smi_data_buf_free();
+	if (eps_buffer)
+		memunmap(eps_buffer);
 	platform_device_unregister(dcdbas_pdev_reg);
 	platform_driver_unregister(&dcdbas_driver);
 }
drivers/firmware/dcdbas.h +10 -0
index ca3cb0a54ab6..52729a494b00 100644
@@ -53,6 +53,7 @@
 #define EXPIRED_TIMER				(0)
 
 #define SMI_CMD_MAGIC				(0x534D4931)
+#define SMM_EPS_SIG				"$SCB"
 
 #define DCDBAS_DEV_ATTR_RW(_name) \
 	DEVICE_ATTR(_name,0600,_name##_show,_name##_store);
@@ -103,5 +104,14 @@ struct apm_cmd {
 
 int dcdbas_smi_request(struct smi_cmd *smi_cmd);
 
+struct smm_eps_table {
+	char smm_comm_buff_anchor[4];
+	u8 length;
+	u8 checksum;
+	u8 version;
+	u64 smm_comm_buff_addr;
+	u64 num_of_4k_pages;
+} __packed;
+
 #endif /* _DCDBAS_H_ */
 
Signature · 1 line
2.19.0.221.g150f307af
#3 lore raw

PATCH 3/5 firmware: dell_rbu: Move dell_rbu to drivers/platform/x86

In reply to Stuart Hayes

From: Stuart Hayes <[email protected]>

---
 drivers/firmware/Kconfig                      | 12 ------------
 drivers/firmware/Makefile                     |  1 -
 drivers/platform/x86/Kconfig                  | 12 ++++++++++++
 drivers/platform/x86/Makefile                 |  1 +
 drivers/{firmware => platform/x86}/dell_rbu.c |  0
 5 files changed, 13 insertions(+), 13 deletions(-)
 rename drivers/{firmware => platform/x86}/dell_rbu.c (100%)
drivers/firmware/Kconfig +0 -12
index 6e83880046d7..02f39d20efce 100644
@@ -145,18 +145,6 @@ config EFI_PCDP
 	  See DIG64_HCDPv20_042804.pdf available from
 	  <http://www.dig64.org/specifications/> 
 
-config DELL_RBU
-	tristate "BIOS update support for DELL systems via sysfs"
-	depends on X86
-	select FW_LOADER
-	select FW_LOADER_USER_HELPER
-	help
-	 Say m if you want to have the option of updating the BIOS for your
-	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
-	 supporting application to communicate with the BIOS regarding the new
-	 image for the image update to take effect.
-	 See <file:Documentation/dell_rbu.txt> for more details on the driver.
-
 config DCDBAS
 	tristate "Dell Systems Management Base Driver"
 	depends on X86
drivers/firmware/Makefile +0 -1
index e18a041cfc53..61887ba9df1d 100644
@@ -11,7 +11,6 @@ obj-$(CONFIG_DMI)		+= dmi_scan.o
 obj-$(CONFIG_DMI_SYSFS)		+= dmi-sysfs.o
 obj-$(CONFIG_EDD)		+= edd.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
-obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
 obj-$(CONFIG_DCDBAS)		+= dcdbas.o
 obj-$(CONFIG_DMIID)		+= dmi-id.o
 obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
drivers/platform/x86/Kconfig +12 -0
index 0c1aa6c314f5..cb037da32107 100644
@@ -227,6 +227,18 @@ config DELL_RBTN
 	  To compile this driver as a module, choose M here: the module will
 	  be called dell-rbtn.
 
+config DELL_RBU
+	tristate "BIOS update support for DELL systems via sysfs"
+	depends on X86
+	select FW_LOADER
+	select FW_LOADER_USER_HELPER
+	help
+	 Say m if you want to have the option of updating the BIOS for your
+	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
+	 supporting application to communicate with the BIOS regarding the new
+	 image for the image update to take effect.
+	 See <file:Documentation/dell_rbu.txt> for more details on the driver.
+
 
 config FUJITSU_LAPTOP
 	tristate "Fujitsu Laptop Extras"
drivers/platform/x86/Makefile +1 -0
index e6d1becf81ce..8843f8e22127 100644
@@ -23,6 +23,7 @@ obj-$(CONFIG_DELL_WMI_AIO)	+= dell-wmi-aio.o
 obj-$(CONFIG_DELL_WMI_LED)	+= dell-wmi-led.o
 obj-$(CONFIG_DELL_SMO8800)	+= dell-smo8800.o
 obj-$(CONFIG_DELL_RBTN)		+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
 obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_ACER_WIRELESS)	+= acer-wireless.o
 obj-$(CONFIG_ACERHDF)		+= acerhdf.o
drivers/platform/x86/dell_rbu.c renamed from drivers/firmware/dell_rbu.c +0 -0
similarity index 100%
rename from drivers/firmware/dell_rbu.c
rename to drivers/platform/x86/dell_rbu.c
Signature · 1 line
2.19.0.221.g150f307af
#4 lore raw

PATCH 4/5 firmware: dcdbas: Move dcdbas to drivers/platform/x86

In reply to Stuart Hayes

From: Stuart Hayes <[email protected]>

---
 drivers/firmware/Kconfig                    | 16 ----------------
 drivers/firmware/Makefile                   |  1 -
 drivers/platform/x86/Kconfig                | 16 ++++++++++++++++
 drivers/platform/x86/Makefile               |  1 +
 drivers/{firmware => platform/x86}/dcdbas.c |  0
 drivers/{firmware => platform/x86}/dcdbas.h |  0
 drivers/platform/x86/dell-smbios-smm.c      |  2 +-
 7 files changed, 18 insertions(+), 18 deletions(-)
 rename drivers/{firmware => platform/x86}/dcdbas.c (100%)
 rename drivers/{firmware => platform/x86}/dcdbas.h (100%)
drivers/firmware/Kconfig +0 -16
index 02f39d20efce..6d0c28fd3bad 100644
@@ -145,22 +145,6 @@ config EFI_PCDP
 	  See DIG64_HCDPv20_042804.pdf available from
 	  <http://www.dig64.org/specifications/> 
 
-config DCDBAS
-	tristate "Dell Systems Management Base Driver"
-	depends on X86
-	help
-	  The Dell Systems Management Base Driver provides a sysfs interface
-	  for systems management software to perform System Management
-	  Interrupts (SMIs) and Host Control Actions (system power cycle or
-	  power off after OS shutdown) on certain Dell systems.
-
-	  See <file:Documentation/dcdbas.txt> for more details on the driver
-	  and the Dell systems on which Dell systems management software makes
-	  use of this driver.
-
-	  Say Y or M here to enable the driver for use by Dell systems
-	  management software such as Dell OpenManage.
-
 config DMIID
     bool "Export DMI identification via sysfs to userspace"
     depends on DMI
drivers/firmware/Makefile +0 -1
index 61887ba9df1d..edda4206d8fc 100644
@@ -11,7 +11,6 @@ obj-$(CONFIG_DMI)		+= dmi_scan.o
 obj-$(CONFIG_DMI_SYSFS)		+= dmi-sysfs.o
 obj-$(CONFIG_EDD)		+= edd.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
-obj-$(CONFIG_DCDBAS)		+= dcdbas.o
 obj-$(CONFIG_DMIID)		+= dmi-id.o
 obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
drivers/platform/x86/Kconfig +16 -0
index cb037da32107..1c7e553c28ce 100644
@@ -105,6 +105,22 @@ config ASUS_LAPTOP
 
 	  If you have an ACPI-compatible ASUS laptop, say Y or M here.
 
+config DCDBAS
+	tristate "Dell Systems Management Base Driver"
+	depends on X86
+	help
+	  The Dell Systems Management Base Driver provides a sysfs interface
+	  for systems management software to perform System Management
+	  Interrupts (SMIs) and Host Control Actions (system power cycle or
+	  power off after OS shutdown) on certain Dell systems.
+
+	  See <file:Documentation/dcdbas.txt> for more details on the driver
+	  and the Dell systems on which Dell systems management software makes
+	  use of this driver.
+
+	  Say Y or M here to enable the driver for use by Dell systems
+	  management software such as Dell OpenManage.
+
 #
 # The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those
 # backends are selected. The "depends" line prevents a configuration
drivers/platform/x86/Makefile +1 -0
index 8843f8e22127..4e2712c9c0b0 100644
@@ -12,6 +12,7 @@ obj-$(CONFIG_EEEPC_WMI)		+= eeepc-wmi.o
 obj-$(CONFIG_MSI_LAPTOP)	+= msi-laptop.o
 obj-$(CONFIG_ACPI_CMPC)		+= classmate-laptop.o
 obj-$(CONFIG_COMPAL_LAPTOP)	+= compal-laptop.o
+obj-$(CONFIG_DCDBAS)		+= dcdbas.o
 obj-$(CONFIG_DELL_SMBIOS)	+= dell-smbios.o
 dell-smbios-objs		:= dell-smbios-base.o
 dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
drivers/platform/x86/dcdbas.c renamed from drivers/firmware/dcdbas.c +0 -0
similarity index 100%
rename from drivers/firmware/dcdbas.c
rename to drivers/platform/x86/dcdbas.c
drivers/platform/x86/dcdbas.h renamed from drivers/firmware/dcdbas.h +0 -0
similarity index 100%
rename from drivers/firmware/dcdbas.h
rename to drivers/platform/x86/dcdbas.h
drivers/platform/x86/dell-smbios-smm.c +1 -1
index 97a90bebc360..ab9b822a6dfe 100644
@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
-#include "../../firmware/dcdbas.h"
+#include "dcdbas.h"
 #include "dell-smbios.h"
 
 static int da_command_address;
Signature · 1 line
2.19.0.221.g150f307af
#5 lore raw

PATCH 5/5 MAINTAINERS: Update maintainer for dcdbas and dell_rbu

In reply to Stuart Hayes

From: Stuart Hayes <[email protected]>

Assign maintainer for dell_rbu driver, and reassign maintainer of dcdbas from inactive maintainer (current maintainer is aware of this change-- see https://www.spinics.net/lists/platform-driver-x86/msg16336.html).

---
 MAINTAINERS | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
MAINTAINERS +9 -2
index 4ece30f15777..455b3fe6954e 100644
@@ -4188,6 +4188,12 @@ M:	Pali Rohár <[email protected]>
 S:	Maintained
 F:	drivers/platform/x86/dell-rbtn.*
 
+DELL REMOTE BIOS UPDATE DRIVER
+M:	Stuart Hayes <[email protected]>	
+L:	[email protected]
+S:	Maintained
+F:	drivers/platform/x86/dell_rbu.c
+
 DELL LAPTOP SMM DRIVER
 M:	Pali Rohár <[email protected]>
 S:	Maintained
@@ -4195,10 +4201,11 @@ F:	drivers/hwmon/dell-smm-hwmon.c
 F:	include/uapi/linux/i8k.h
 
 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
-M:	Doug Warzecha <[email protected]>
+M:	Stuart Hayes <[email protected]>
+L:	[email protected]
 S:	Maintained
 F:	Documentation/dcdbas.txt
-F:	drivers/firmware/dcdbas.*
+F:	drivers/platform/x86/dcdbas.*
 
 DELL WMI NOTIFICATIONS DRIVER
 M:	Matthew Garrett <[email protected]>
Signature · 1 line
2.19.0.221.g150f307af
#6 lore raw
In reply to Stuart Hayes
Quoted 6 lines · Stuart Hayes

From: Stuart Hayes <[email protected]>

The dell_rbu and dcdbas drivers need some changes, and should be moved to drivers/platform/x86. Additionally, dell_rbu needs a maintainer, and the listed maintainer for dcdbas is inactive and needs to be changed.

I pushed this series to my review and testing queue to allow bots play with.

But.
Please, add commit messages to patches 4 and 5 (I can't take w/o them). Collect Doug's tag that proves he is okay with the change (I remember he answered something to the old thread, though I don't remember the details except annoying footer which should not be up in open source mailing lists).

So, while bots are playing with the code I'm waiting for v2 of this with above addressed.
Thanks!

Quoted 25 lines

Stuart Hayes (5):
firmware: dell_rbu: Make payload memory uncachable
firmware: dcdbas: Add support for WSMT ACPI table
firmware: dell_rbu: Move dell_rbu to drivers/platform/x86
firmware: dcdbas: Move dcdbas to drivers/platform/x86
MAINTAINERS: Update maintainer for dcdbas and dell_rbu

 MAINTAINERS                                   |  11 +-
 drivers/firmware/Kconfig                      |  28 ----
 drivers/firmware/Makefile                     |   2 -
 drivers/platform/x86/Kconfig                  |  28 ++++
 drivers/platform/x86/Makefile                 |   2 +
 drivers/{firmware => platform/x86}/dcdbas.c   | 123 +++++++++++++++++-
 drivers/{firmware => platform/x86}/dcdbas.h   |  10 ++
 drivers/platform/x86/dell-smbios-smm.c        |   2 +-
 drivers/{firmware => platform/x86}/dell_rbu.c |   8 ++
 9 files changed, 175 insertions(+), 39 deletions(-)
 rename drivers/{firmware => platform/x86}/dcdbas.c (82%)
 rename drivers/{firmware => platform/x86}/dcdbas.h (93%)
 rename drivers/{firmware => platform/x86}/dell_rbu.c (98%)

--
2.19.0.221.g150f307af

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#7 lore raw
Quoted 9 lines · Andy Shevchenko
Quoted 6 lines · Stuart Hayes

From: Stuart Hayes <[email protected]>

The dell_rbu and dcdbas drivers need some changes, and should be moved to drivers/platform/x86. Additionally, dell_rbu needs a maintainer, and the listed maintainer for dcdbas is inactive and needs to be changed.

Quoted 8 lines

I pushed this series to my review and testing queue to allow bots play with.

But.
Please, add commit messages to patches 4 and 5 (I can't take w/o them). Collect Doug's tag that proves he is okay with the change (I remember he answered something to the old thread, though I don't remember the details except annoying footer which should not be up in open source mailing lists).

Applying: MAINTAINERS: Update maintainer for dcdbas and dell_rbu .git/rebase-apply/patch:14: trailing whitespace.
M: Stuart Hayes <[email protected]>
warning: 1 line adds whitespace errors.

Fix the above as well.

Quoted 35 lines

So, while bots are playing with the code I'm waiting for v2 of this with above addressed.
Thanks!

Quoted 22 lines

Stuart Hayes (5):
firmware: dell_rbu: Make payload memory uncachable
firmware: dcdbas: Add support for WSMT ACPI table
firmware: dell_rbu: Move dell_rbu to drivers/platform/x86
firmware: dcdbas: Move dcdbas to drivers/platform/x86
MAINTAINERS: Update maintainer for dcdbas and dell_rbu

 MAINTAINERS                                   |  11 +-
 drivers/firmware/Kconfig                      |  28 ----
 drivers/firmware/Makefile                     |   2 -
 drivers/platform/x86/Kconfig                  |  28 ++++
 drivers/platform/x86/Makefile                 |   2 +
 drivers/{firmware => platform/x86}/dcdbas.c   | 123 +++++++++++++++++-
 drivers/{firmware => platform/x86}/dcdbas.h   |  10 ++
 drivers/platform/x86/dell-smbios-smm.c        |   2 +-
 drivers/{firmware => platform/x86}/dell_rbu.c |   8 ++
 9 files changed, 175 insertions(+), 39 deletions(-)
 rename drivers/{firmware => platform/x86}/dcdbas.c (82%)
 rename drivers/{firmware => platform/x86}/dcdbas.h (93%)
 rename drivers/{firmware => platform/x86}/dell_rbu.c (98%)
Quoted 3 lines

--
2.19.0.221.g150f307af

--
With Best Regards,
Andy Shevchenko

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#8 lore raw
In reply to Andy Shevchenko
Quoted 18 lines
Quoted 6 lines · Stuart Hayes

From: Stuart Hayes <[email protected]>

The dell_rbu and dcdbas drivers need some changes, and should be moved to drivers/platform/x86. Additionally, dell_rbu needs a maintainer, and the listed maintainer for dcdbas is inactive and needs to be changed.

I pushed this series to my review and testing queue to allow bots play with.

But.
Please, add commit messages to patches 4 and 5 (I can't take w/o them). Collect Doug's tag that proves he is okay with the change (I remember he answered something to the old thread, though I don't remember the details except annoying footer which should not be up in open source mailing lists).

Quoted 4 lines

So, while bots are playing with the code I'm waiting for v2 of this with above addressed.
Thanks!

Just so it's extra clear, you want an "Acked-by" tag from Doug W in a public forum? Or he should be CC to that patch and needs to give the acked-by tag in the V2?

He already did respond in a public forum indicating this although he didn't "generate a tag" for that:
https://www.spinics.net/lists/platform-driver-x86/msg16336.html

Can Stuart just add the "Acked-by" tag himself to the commit in V2 at this point considering that? Or do you need patchwork to pick it up and apply it?

#9 lore raw
Quoted 24 lines · On Wed, Sep 26, 2018 at 5:50 PM <[email protected]> wrote:
Quoted 19 lines
Quoted 6 lines · Stuart Hayes

From: Stuart Hayes <[email protected]>

The dell_rbu and dcdbas drivers need some changes, and should be moved to drivers/platform/x86. Additionally, dell_rbu needs a maintainer, and the listed maintainer for dcdbas is inactive and needs to be changed.

I pushed this series to my review and testing queue to allow bots play with.

But.
Please, add commit messages to patches 4 and 5 (I can't take w/o them). Collect Doug's tag that proves he is okay with the change (I remember he answered something to the old thread, though I don't remember the details except annoying footer which should not be up in open source mailing lists).

Quoted 4 lines

So, while bots are playing with the code I'm waiting for v2 of this with above addressed.
Thanks!

Quoted 7 lines

Just so it's extra clear, you want an "Acked-by" tag from Doug W in a public forum? Or he should be CC to that patch and needs to give the acked-by tag in the V2?

He already did respond in a public forum indicating this although he didn't "generate a tag" for that:
https://www.spinics.net/lists/platform-driver-x86/msg16336.html

Thanks, that is what I need.

Quoted 2 lines

Can Stuart just add the "Acked-by" tag himself to the commit in V2 at this point considering that?

Yes.

Quoted 1 line

Or do you need patchwork to pick it up and apply it?

No need. Manual update would work to me.

Signature · 2 lines
With Best Regards,
Andy Shevchenko