Skip to contentSkip to conversation

arm64: percpu: Initialize ret in the default case

PATCH Applied Nathan Chancellor 3 participants 5 messages Sep 25, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: percpu: Initialize ret in the default case

Clang warns that if the default case is taken, ret will be uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]

        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0

This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings.

---
 arch/arm64/include/asm/percpu.h | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/include/asm/percpu.h +3 -0
index 9234013e759e..21a81b59a0cc 100644
@@ -96,6 +96,7 @@ static inline unsigned long __percpu_##op(void *ptr,			\
 		: [val] "Ir" (val));					\
 		break;							\
 	default:							\
+		ret = 0;						\
 		BUILD_BUG();						\
 	}								\
 									\
@@ -125,6 +126,7 @@ static inline unsigned long __percpu_read(void *ptr, int size)
 		ret = READ_ONCE(*(u64 *)ptr);
 		break;
 	default:
+		ret = 0;
 		BUILD_BUG();
 	}
 
@@ -194,6 +196,7 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
 		: [val] "r" (val));
 		break;
 	default:
+		ret = 0;
 		BUILD_BUG();
 	}
 
Signature · 1 line
2.19.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 19 lines · Nathan Chancellor

Clang warns that if the default case is taken, ret will be uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]

        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0
Quoted 4 lines

This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings.

Clang does semantic analysis BEFORE inlining/optimizations, so I can't determine that default is never reachable. Nathan, thanks for this patch.

Quoted 38 lines
---
 arch/arm64/include/asm/percpu.h | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/include/asm/percpu.h +3 -1
index 9234013e759e..21a81b59a0cc 100644
@@ -96,6 +96,7 @@ static inline unsigned long __percpu_##op(void *ptr,                  \
                : [val] "Ir" (val));                                    \
                break;                                                  \
        default:                                                        \
+               ret = 0;                                                \
                BUILD_BUG();                                            \
        }                                                               \
                                                                        \
@@ -125,6 +126,7 @@ static inline unsigned long __percpu_read(void *ptr, int size)
                ret = READ_ONCE(*(u64 *)ptr);
                break;
        default:
+               ret = 0;
                BUILD_BUG();
        }
 
@@ -194,6 +196,7 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
                : [val] "r" (val));
                break;
        default:
+               ret = 0;
                BUILD_BUG();
        }
 
--

2.19.0

Signature · 2 lines
Thanks,
~Nick Desaulniers
#2 lore raw
Quoted 22 lines · Nick Desaulniers
Quoted 19 lines · Nathan Chancellor

Clang warns that if the default case is taken, ret will be uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]

        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0
Quoted 6 lines
Quoted 4 lines

This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings.

Clang does semantic analysis BEFORE inlining/optimizations, so I can't

s/I/it/

Quoted 47 lines

determine that default is never reachable. Nathan, thanks for this patch.

Quoted 36 lines
---
 arch/arm64/include/asm/percpu.h | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/include/asm/percpu.h +3 -1
index 9234013e759e..21a81b59a0cc 100644
@@ -96,6 +96,7 @@ static inline unsigned long __percpu_##op(void *ptr,                  \
                : [val] "Ir" (val));                                    \
                break;                                                  \
        default:                                                        \
+               ret = 0;                                                \
                BUILD_BUG();                                            \
        }                                                               \
                                                                        \
@@ -125,6 +126,7 @@ static inline unsigned long __percpu_read(void *ptr, int size)
                ret = READ_ONCE(*(u64 *)ptr);
                break;
        default:
+               ret = 0;
                BUILD_BUG();
        }
 
@@ -194,6 +196,7 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
                : [val] "r" (val));
                break;
        default:
+               ret = 0;
                BUILD_BUG();
        }
 
--
Quoted 2 lines

2.19.0

--
Thanks,
~Nick Desaulniers

Signature · 2 lines
Thanks,
~Nick Desaulniers
maintainer
#3 lore raw
In reply to Nick Desaulniers

Hi Nick,

Quoted 26 lines · Nick Desaulniers
Quoted 19 lines · Nathan Chancellor

Clang warns that if the default case is taken, ret will be uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]

        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0
Quoted 4 lines

This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings.

Quoted 5 lines

Clang does semantic analysis BEFORE inlining/optimizations, so I can't determine that default is never reachable. Nathan, thanks for this patch.

Thanks for the explanation!
Dennis

maintainer Applied
#4 lore raw
In reply to Nathan Chancellor

Hi Nathan,

Quoted 18 lines · Nathan Chancellor

Clang warns that if the default case is taken, ret will be uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]

        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0
Quoted 7 lines

This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings.

I've applied this to percpu/for-4.20.

Thanks,
Dennis