ARM: dts: imx51: Add label for VPU node
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/6 ARM: dts: imx51: Add label for VPU node
Add label for VPU node so that board dts files can disable VPU if needed.
--- arch/arm/boot/dts/imx51.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx51.dtsi +1 -1
@@ -608,7 +608,7 @@ status = "disabled"; }; - vpu at 83ff4000 { + vpu: vpu at 83ff4000 { compatible = "fsl,imx51-vpu", "cnm,codahx4"; reg = <0x83ff4000 0x1000>; interrupts = <9>;
Signature · 1 line
2.7.4
Fabio Estevam
reviewerPATCH 2/6 ARM: dts: imx51-zii-scu3-esb: Disable VPU
imx51-zii-scu3-esb does not have any video encoding/decoding needs, so disable the VPU.
--- arch/arm/boot/dts/imx51-zii-scu3-esb.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/imx51-zii-scu3-esb.dts +4 -0
@@ -350,6 +350,10 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + &wdog1 { status = "disabled"; };
Signature · 1 line
2.7.4
PATCH 2/6 ARM: dts: imx51-zii-scu3-esb: Disable VPU
Quoted 2 lines · Fabio Estevam
imx51-zii-scu3-esb does not have any video encoding/decoding needs, so disable the VPU.
@Andrey, do you agree?
Shawn
Quoted 24 lines
Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/boot/dts/imx51-zii-scu3-esb.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boot/dts/imx51-zii-scu3-esb.dts +4
-0@@ -350,6 +350,10 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + &wdog1 { status = "disabled"; };Signature · 1 line
2.7.4
PATCH 2/6 ARM: dts: imx51-zii-scu3-esb: Disable VPU
Quoted 7 lines · Shawn Guo
Quoted 2 lines · Fabio Estevam
imx51-zii-scu3-esb does not have any video encoding/decoding needs, so disable the VPU.
@Andrey, do you agree?
Oh, sorry, the though of providing an Acked-by didn't occur to me for some reason, my apologies. Yeah, those boards definitely don't use VPU.
Thanks,
Andrey Smirnov
Fabio Estevam
reviewerPATCH 3/6 ARM: dts: imx51-zii-scu2-mezz: Disable VPU
In reply to Fabio Estevamimx51-zii-scu2-mezz does not have any video encoding/decoding needs, so disable the VPU.
--- arch/arm/boot/dts/imx51-zii-scu2-mezz.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/imx51-zii-scu2-mezz.dts +4 -0
@@ -342,6 +342,10 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = <
Signature · 1 line
2.7.4
PATCH 3/6 ARM: dts: imx51-zii-scu2-mezz: Disable VPU
Quoted 2 lines · Fabio Estevam
imx51-zii-scu2-mezz does not have any video encoding/decoding needs, so disable the VPU.
@Andrey, do you agree?
Shawn
Quoted 24 lines
Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/boot/dts/imx51-zii-scu2-mezz.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boot/dts/imx51-zii-scu2-mezz.dts +4
-0@@ -342,6 +342,10 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = <Signature · 1 line
2.7.4
PATCH 3/6 ARM: dts: imx51-zii-scu2-mezz: Disable VPU
Quoted 7 lines · Shawn Guo
Quoted 2 lines · Fabio Estevam
imx51-zii-scu2-mezz does not have any video encoding/decoding needs, so disable the VPU.
@Andrey, do you agree?
Same here:
Thanks,
Andrey Smirnov
Fabio Estevam
reviewerPATCH 4/6 ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
In reply to Fabio Estevamimx51-zii-scu2-mezz has an external watchdog in the environment microcontroller, so disable the internal one.
--- arch/arm/boot/dts/imx51-zii-scu2-mezz.dts | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/imx51-zii-scu2-mezz.dts +4 -0
@@ -346,6 +346,10 @@ status = "disabled"; }; +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = <
Signature · 1 line
2.7.4
PATCH 4/6 ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
Quoted 4 lines · Fabio Estevam
imx51-zii-scu2-mezz has an external watchdog in the environment microcontroller, so disable the internal one.
Signed-off-by Fabio Estevam <[email protected]>
@Andrey, are you okay with this one?
Shawn
Quoted 22 lines
--- arch/arm/boot/dts/imx51-zii-scu2-mezz.dts | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/boot/dts/imx51-zii-scu2-mezz.dts +4
-0@@ -346,6 +346,10 @@ status = "disabled"; }; +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = <Signature · 1 line
2.7.4
PATCH 4/6 ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdog
Quoted 9 lines · Shawn Guo
Quoted 4 lines · Fabio Estevam
imx51-zii-scu2-mezz has an external watchdog in the environment microcontroller, so disable the internal one.
Signed-off-by Fabio Estevam <[email protected]>@Andrey, are you okay with this one?
Yep, that's one of the boards that have RAVE SP MCU that implements watchdog functionality there.
Thanks,
Andrey Smirnov
Fabio Estevam
reviewerPATCH 5/6 ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
In reply to Fabio EstevamNo SDIO devices are connected to these ports, so pass the 'no-sdio' property.
--- arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/vf610-zii-cfu1.dts +2 -0
@@ -122,6 +122,7 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; status = "okay"; };
@@ -129,6 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; };
Signature · 1 line
2.7.4
PATCH 5/6 ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
Quoted 4 lines · Fabio Estevam
No SDIO devices are connected to these ports, so pass the 'no-sdio' property.
Signed-off-by Fabio Estevam <[email protected]>
@Andrey, are you okay?
Shawn
Quoted 27 lines
--- arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 ++ 1 file changed, 2 insertions(+)arch/arm/boot/dts/vf610-zii-cfu1.dts +2
-0@@ -122,6 +122,7 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; status = "okay"; };@@ -129,6 +130,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; };Signature · 1 line
2.7.4
PATCH 5/6 ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' property
Quoted 9 lines · Shawn Guo
Quoted 4 lines · Fabio Estevam
No SDIO devices are connected to these ports, so pass the 'no-sdio' property.
Signed-off-by Fabio Estevam <[email protected]>@Andrey, are you okay?
Thanks,
Andrey Smirnov
Fabio Estevam
reviewerPATCH 6/6 ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
In reply to Fabio EstevamPass the 'no-sd' for esdhc0 controller as it is wired to eMMC.
--- arch/arm/boot/dts/vf610-zii-cfu1.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/vf610-zii-cfu1.dts +1 -0
@@ -123,6 +123,7 @@ no-1-8-v; keep-power-in-suspend; no-sdio; + no-sd; status = "okay"; };
Signature · 1 line
2.7.4
PATCH 6/6 ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
Quoted 3 lines · Fabio Estevam
Pass the 'no-sd' for esdhc0 controller as it is wired to eMMC.
Signed-off-by Fabio Estevam <[email protected]>
@Andrey?
Shawn
Quoted 19 lines
--- arch/arm/boot/dts/vf610-zii-cfu1.dts | 1 + 1 file changed, 1 insertion(+)arch/arm/boot/dts/vf610-zii-cfu1.dts +1
-0@@ -123,6 +123,7 @@ no-1-8-v; keep-power-in-suspend; no-sdio; + no-sd; status = "okay"; };Signature · 1 line
2.7.4
PATCH 6/6 ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' property
Quoted 7 lines · Shawn Guo
Quoted 3 lines · Fabio Estevam
Pass the 'no-sd' for esdhc0 controller as it is wired to eMMC.
Signed-off-by Fabio Estevam <[email protected]>@Andrey?
Thanks,
Andrey Smirnov
Shawn Guo
AppliedPATCH 1/6 ARM: dts: imx51: Add label for VPU node
In reply to Fabio EstevamQuoted 4 lines · Fabio Estevam
Add label for VPU node so that board dts files can disable VPU if needed.
Signed-off-by Fabio Estevam <[email protected]>
Applied all, thanks.