iio: ad5064: Fix regulator handling
Subsystems (2)
PATCH 1/1 iio: ad5064: Fix regulator handling
The correct way to handle errors returned by regualtor_get() and friends is to propagate the error since that means that an regulator was specified, but something went wrong when requesting it.
For handling optional regulators, e.g. when the device has an internal vref, regulator_get_optional() should be used to avoid getting the dummy regulator that the regulator core otherwise provides.
--- drivers/iio/dac/ad5064.c | 53 ++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-)
drivers/iio/dac/ad5064.c +38 -15
@@ -808,6 +808,40 @@ static int ad5064_set_config(struct ad5064_state *st, unsigned int val)return ad5064_write (st, cmd,0 , val,0 ); } +static int ad5064_request_vref (struct ad5064_state *st,struct device *dev) +{ +unsigned int i; +int ret; + +for (i =0 ; i <ad5064_num_vref (st); ++i) + st->vref_reg[i].supply =ad5064_vref_name (st, i); + +if (!st->chip_info->internal_vref) +return devm_regulator_bulk_get (dev,ad5064_num_vref (st), + st->vref_reg); + +/* +* This assumes that when the regulator has an internal VREF +* there is only one external VREF connection, which is +* currently the case for all supported devices. +*/ + st->vref_reg[0 ].consumer =devm_regulator_get_optional (dev,"vref" ); +if (!IS_ERR (st->vref_reg[0 ].consumer)) +return 0 ; + + ret =PTR_ERR (st->vref_reg[0 ].consumer); +if (ret != -ENODEV ) +return ret; + +/* If no external regulator was supplied use the internal VREF */ + st->use_internal_vref = true; + ret =ad5064_set_config (st,AD5064_CONFIG_INT_VREF_ENABLE ); +if (ret) +dev_err (dev,"Failed to enable internal vref: %d\n" , ret); + +return ret; +} +static int ad5064_probe (struct device *dev,enum ad5064_type type,const char *name,ad5064_write_func write) {
@@ -828,22 +862,11 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, st->dev = dev; st->write = write; -for (i =0 ; i <ad5064_num_vref (st); ++i) - st->vref_reg[i].supply =ad5064_vref_name (st, i); + ret =ad5064_request_vref (st, dev); +if (ret) +return ret; - ret =devm_regulator_bulk_get (dev,ad5064_num_vref (st), - st->vref_reg); -if (ret) { -if (!st->chip_info->internal_vref) -return ret; - st->use_internal_vref = true; - ret =ad5064_set_config (st,AD5064_CONFIG_INT_VREF_ENABLE ); -if (ret) { -dev_err (dev,"Failed to enable internal vref: %d\n" , - ret); -return ret; - } - }else { +if (!st->use_internal_vref) { ret =regulator_bulk_enable (ad5064_num_vref (st), st->vref_reg);if (ret)return ret;
Signature · 1 line
2.11.0
Jonathan Cameron
maintainerQuoted 9 lines · On Fri, 28 Sep 2018 11:23:40 +0200 Lars-Peter Clausen <[email protected]> wrote:
The correct way to handle errors returned by
regualtor_get()and friends is to propagate the error since that means that an regulator was specified, but something went wrong when requesting it.For handling optional regulators, e.g. when the device has an internal vref,
regulator_get_optional()should be used to avoid getting the dummy regulator that the regulator core otherwise provides.Signed-off-by Lars-Peter Clausen <[email protected]>
Sensible cleanup. Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.
I've marked it for stable as it seems safe to apply going back a long way. However, it may be that it will fail at somepoint due to context changes. If so, we can think about doing the backport when that happens.
As with other fixes today I'm going to delay this until the upcoming merge window given we are quite late in the cycle.
Thanks,
Jonathan
Quoted 76 lines
--- drivers/iio/dac/ad5064.c | 53 ++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 15 deletions(-)drivers/iio/dac/ad5064.c +38
-15@@ -808,6 +808,40 @@ static int ad5064_set_config(struct ad5064_state *st, unsigned int val)return ad5064_write (st, cmd,0 , val,0 ); } +static int ad5064_request_vref (struct ad5064_state *st,struct device *dev) +{ +unsigned int i; +int ret; + +for (i =0 ; i <ad5064_num_vref (st); ++i) + st->vref_reg[i].supply =ad5064_vref_name (st, i); + +if (!st->chip_info->internal_vref) +return devm_regulator_bulk_get (dev,ad5064_num_vref (st), + st->vref_reg); + +/* +* This assumes that when the regulator has an internal VREF +* there is only one external VREF connection, which is +* currently the case for all supported devices. +*/ + st->vref_reg[0 ].consumer =devm_regulator_get_optional (dev,"vref" ); +if (!IS_ERR (st->vref_reg[0 ].consumer)) +return 0 ; + + ret =PTR_ERR (st->vref_reg[0 ].consumer); +if (ret != -ENODEV ) +return ret; + +/* If no external regulator was supplied use the internal VREF */ + st->use_internal_vref = true; + ret =ad5064_set_config (st,AD5064_CONFIG_INT_VREF_ENABLE ); +if (ret) +dev_err (dev,"Failed to enable internal vref: %d\n" , ret); + +return ret; +} +static int ad5064_probe (struct device *dev,enum ad5064_type type,const char *name,ad5064_write_func write) {@@ -828,22 +862,11 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, st->dev = dev; st->write = write; -for (i =0 ; i <ad5064_num_vref (st); ++i) - st->vref_reg[i].supply =ad5064_vref_name (st, i); + ret =ad5064_request_vref (st, dev); +if (ret) +return ret; - ret =devm_regulator_bulk_get (dev,ad5064_num_vref (st), - st->vref_reg); -if (ret) { -if (!st->chip_info->internal_vref) -return ret; - st->use_internal_vref = true; - ret =ad5064_set_config (st,AD5064_CONFIG_INT_VREF_ENABLE ); -if (ret) { -dev_err (dev,"Failed to enable internal vref: %d\n" , - ret); -return ret; - } - }else { +if (!st->use_internal_vref) { ret =regulator_bulk_enable (ad5064_num_vref (st), st->vref_reg);if (ret)return ret;