configs/pc: add a configuration to build a UEFI+GPT image
PATCH v2 1/1 configs/pc: add a configuration to build a UEFI+GPT image
This is an example of how to craft a disk image with GPT partitioning instead of MBR. This is achieved by means of a post-image script which uses mkdosfs+mcopy+sfdisk, since genimage is unable to deal with GPT.
The script was kept as simple as possible to make it easy to understand and adapt for other purposes.
The root filesystem location is passed to the kernel by a partition UUID, so it is possible to boot on QEMU, directly from the disk image, or dump the image to a physical device.
---
Changes v1->v2:
Fix commit message ("ane", spurious "the").
--- board/pc/post-image-efi-gpt.sh | 62 ++++++++++++++++++++++++++++ board/pc/readme.txt | 6 ++- configs/pc_x86_64_efi_gpt_defconfig | 64 +++++++++++++++++++++++++++++ 3 files changed, 131 insertions(+), 1 deletion(-) create mode 100755 board/pc/post-image-efi-gpt.sh create mode 100644 configs/pc_x86_64_efi_gpt_defconfig
board/pc/post-image-efi-gpt.sh new file +62 -0
@@ -0,0 +1,62 @@ +#!/bin/sh + +set -e + +cd ${BINARIES_DIR} + +# GPT partition type UUIDs +esp_type=c12a7328-f81f-11d2-ba4b-00a0c93ec93b +linux_type=44479540-f297-41b2-9af7-d131d5f0458a + +# Partition UUIDs +efi_part_uuid=$(uuidgen) +root_part_uuid=$(uuidgen) + +# Boot partition offset and size, in 512-byte sectors +efi_part_start=64 +efi_part_size=32768 + +# Rootfs partition offset and size, in 512-byte sectors +root_part_start=$(( efi_part_start + efi_part_size )) +root_part_size=$(( $(stat -c %s rootfs.ext2) / 512 )) + +first_lba=34 +last_lba=$(( root_part_start + root_part_size )) + +# Disk image size in 512-byte sectors +image_size=$(( last_lba + first_lba )) + +cat > efi-part/EFI/BOOT/grub.cfg <<EOF +set default="0" +set timeout="5" + +menuentry "Buildroot" { + linux /bzImage root=PARTUUID=$root_part_uuid rootwait console=tty1 +} +EOF + +# Create EFI system partition +rm -f efi-part.vfat +dd if=/dev/zero of=efi-part.vfat bs=512 count=0 seek=$efi_part_size +mkdosfs efi-part.vfat +mcopy -bsp -i efi-part.vfat efi-part/startup.nsh ::startup.nsh +mcopy -bsp -i efi-part.vfat efi-part/EFI ::EFI +mcopy -bsp -i efi-part.vfat bzImage ::bzImage + +rm -f disk.img +dd if=/dev/zero of=disk.img bs=512 count=0 seek=$image_size + +sfdisk disk.img <<EOF +label: gpt +label-id: $(uuidgen) +device: /dev/foobar0 +unit: sectors +first-lba: $first_lba +last-lba: $last_lba + +/dev/foobar0p1 : start=$efi_part_start, size=$efi_part_size, type=$esp_type, uuid=$efi_part_uuid, name="efi-part.vfat" +/dev/foobar0p2 : start=$root_part_start, size=$root_part_size, type=$linux_type, uuid=$root_part_uuid, name="rootfs.ext2" +EOF + +dd if=efi-part.vfat of=disk.img bs=512 count=$efi_part_size seek=$efi_part_start conv=notrunc +dd if=rootfs.ext2 of=disk.img bs=512 count=$root_part_size seek=$root_part_start conv=notrunc
board/pc/readme.txt +5 -1
@@ -9,10 +9,14 @@ Bare PC sample config $ make pc_x86_64_bios_defconfig - Or for EFI: + For EFI-based boot strategy on a MBR-partitioned disk: $ make pc_x86_64_efi_defconfig + Or for EFI-based boot strategy on a GPT-partitioned disk: + + $ make pc_x86_64_efi_gpt_defconfig + Add any additional packages required and build: $ make
configs/pc_x86_64_efi_gpt_defconfig new file +64 -0
64 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v2 1/1 configs/pc: add a configuration to build a UEFI+GPT image
Hello,
Quoted 16 lines · On Sat, 29 Sep 2018 00:16:09 -0300 Carlos Santos <[email protected]>…
This is an example of how to craft a disk image with GPT partitioning instead of MBR. This is achieved by means of a post-image script which uses mkdosfs+mcopy+sfdisk, since genimage is unable to deal with GPT.
The script was kept as simple as possible to make it easy to understand and adapt for other purposes.
The root filesystem location is passed to the kernel by a partition UUID, so it is possible to boot on QEMU, directly from the disk image, or dump the image to a physical device.
Signed-off-by Carlos Santos <[email protected]>Acked-by Thomas Petazzoni <[email protected]>---
Changesv1->v2:
Fix commit message ("ane", spurious "the").
Quoted 7 lines
--- board/pc/post-image-efi-gpt.sh | 62 ++++++++++++++++++++++++++++ board/pc/readme.txt | 6 ++- configs/pc_x86_64_efi_gpt_defconfig | 64 +++++++++++++++++++++++++++++ 3 files changed, 131 insertions(+), 1 deletion(-) create mode 100755 board/pc/post-image-efi-gpt.sh create mode 100644 configs/pc_x86_64_efi_gpt_defconfig
After discussing with Arnout, we decided that there was not much point in having an EFI configuration on one side and an EFI+GPT configuration on the other side. Indeed, all EFI systems support GPT partition tables. So I just took your configuration, and used it to replace the existing pc_x86_64_efi_defconfig. I did the related adjustements as well (hopefully correctly), such as dropping from board/pc/post-build.sh the bits that are no longer needed.
Feel free to give it a test!
Long term of course, having support for GPT in genimage would be nice.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com