Add support for 1wire protocol and 1wire eeproms
Subsystems (5)
v4 cover Add support for 1wire protocol and 1wire eeproms
Hello Tom,
I rebased this series on the latest u-boot/master, and updated to version4. Also a small fix in one of the patches.
I did not receive any feedback since v3 (August 20th).
Can you please let me know if there are any more requirements for the features to be accepted? So I can work on them.
Thanks !
Below is the original + updated cover letter:
This is a patch series originally written by Maxime Ripard,
https://lists.denx.de/pipermail/u-boot/2016-November/272138.html
titled:
[U-Boot] [PATCH RESEND 0/9] sunxi: chip: Enable the DIP auto-detection
and reworked to include support for the EEPROMs on the PDAs connected to the Microchip/Atmel SAMA Xplained boards.
This is the version 4 of the rework, version 1 was titled:
[PATCH 00/20] Add support for 1wire protocol and 1wire eeproms and version 2 was titled:
[PATCH v2 00/30] Add support for 1wire protocol and 1wire eeproms version 3 was titled:
[PATCH v3 00/34] Add support for 1wire protocol and 1wire eeproms
It addresses feedback received in the first version and fixes a few bugs found in the second version.
Version 4 is just a rebase on latest u-boot with a small fix in one patch.
The patch series adds first a driver for onewire uclass, and onewire over gpio bitbanging driver. Then it adds a uclass for onewire EEPROMS, and specific driver for Maxim EEPROMs. I have added some sandbox support, configuration and device tree for it and for boards sama5d2_xplained, sama5d3_xplained, sama5d4_xplained, sama5d2_ptc_ek and sama5d27_som1_ek. Also added common code for PDA detection, as the memory
on the PDAs is connected to the SoC on the onewire bus.
Thanks to everyone for the review and feedback.
Below is a short summary of the commits:
The series adds a w1-uclass driver for the onewire interface u-class. This is done in patch:
[PATCH v4 01/34] w1: Add 1-Wire uclass
Also, we add a driver for the w1-uclass specific to the onewire over bitbanged gpio, this is done in patch:
[PATCH v4 02/34] w1: Add 1-Wire gpio driver
Add the bindings documentation in:
[PATCH v4 03/34] dt-bindings: W1: w1-gpio: added bindings for w1-gpio
A uclass driver is added for one wire eeproms, in patch :
[PATCH v4 04/34] W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs
Connection between memories and the bus is done in the patch:
[PATCH v4 05/34] w1: identify devices with w1-eeprom uclas
Specific driver for the DS24 Maxim EEPROMs is added in the patch:
[PATCH v4 06/34] W1-EEPROM: add support for Maxim DS24 eeprom families
Bindings for the DS24xxx driver added in the patch:
[PATCH v4 07/34] dt-bindings: w1-eeprom: ds24xxx: create bindings
A sandbox driver for a onewire EEPROM is added in patch:
[PATCH v4 08/34] W1-EEPROM: add sandbox driver
Bindings for the sandbox eeprom driver added in patch:
[PATCH v4 09/34] dt-bindings: w1-eeprom: eep_sandbox: create bindings
A command is added for the onewire protocol in patch:
[PATCH v4 10/34] w1: add command for onewire protocol
Pinctrl driver for sandbox was updated to add a new group and function for w1:
[PATCH v4 11/34] pinctrl: sandbox: add gpio onewire w1 group
Add a node in sandbox DT to have a test node for sandbox. [PATCH v4 12/34] sandbox: DTS: w1: add node for one wire interface on
GPIO
The defconfig for sandbox is updated to include the drivers:
[PATCH v4 13/34] configs: sandbox: add onewire w1 and sandbox
eeprom
Configuration for sama5d2 xplained is updated in patch:
[PATCH v4 14/34] configs: sama5d2_xplained: add onewire and eeprom
Configuration for sama5d3 xplained is updated in patch:
[PATCH v4 15/34] configs: sama5d3_xplained: add onewire and eeprom
Configuration for sama5d27_som1_ek is updated in patch:
[PATCH v4 16/34] configs: sama5d27_som1_ek: add onewire and eeprom
drivers
Configuration for sama5d2 ptc is updated in patch:
[PATCH v4 17/34] configs: sama5d2_ptc_ek: add onewire and eeprom
drivers
Configuration for sama5d4 xplained is updated in patch:
[PATCH v4 18/34] configs: sama5d4_xplained: add onewire and eeprom
drivers
Pda detection is added in the common part for atmel boards:
[PATCH v4 19/34] board: atmel: add support for pda detection
Specifically add it for Sama5d2 xplained board in patch:
[PATCH v4 20/34] board: sama5d2_xplained: add pda detect call at init
time
Specifically add it for Sama5d3 xplained board in patch:
[PATCH v4 21/34] board: sama5d3_xplained: add pda detect call at init
time
Specifically add it for Sama5d27 som1 ek board in patch:
[PATCH v4 22/34] board: sama5d27_som1_ek: add pda detect call at init
time
Specifically add it for Sama5d27 ptc ek board in patch:
[PATCH v4 23/34] board: sama5d2_ptc_ek: add pda detect call at init
time
Specifically add it for Sama5d4 xplained board in patch:
[PATCH v4 24/34] board: sama5d4_xplained: add pda detect call at init
time
Add support for overlays for sama5d2 xplained config in patch:
[PATCH v4 25/34] configs: sama5d2_xplained: add fdt overlay support
Add support for overlays for sama5d3 xplained config in patch:
[PATCH v4 26/34] configs: sama5d3_xplained: add fdt overlay support
Add support for overlays for sama5d2 ptc ek config in patch:
[PATCH v4 27/34] configs: sama5d2_ptc_ek: add fdt overlay support
Add support for overlays for sama5d2 som1 ek config in patch:
[PATCH v4 28/34] configs: sama5d27_som1_ek: add fdt overlay support
Add support for overlays for sama5d4 xplained config in patch:
[PATCH v4 29/34] configs: sama5d4_xplained: add fdt overlay support
The DT for the SAMA5D2 Soc and xplained is updated to include a onewire node. This is done in patch:
[PATCH v4 30/34] ARM: dts: at91: sama5d2_xplained: add onewire connector
The DT for the SAMA5D3 Soc and xplained is updated to include a onewire node. This is done in patch:
[PATCH v4 31/34] ARM: dts: at91: sama5d3_xplained: add onewire connector
The DT for sama5d27 som1 ek is updated to include a onewire node. This is done in patch:
[PATCH v4 32/34] ARM: dts: at91: sama5d27_som1_ek: add onewire
connector for LCD eeprom
The DT for sama5d2 ptc ek is updated to include a onewire node. This is done in patch:
[PATCH v4 33/34] ARM: dts: at91: sama5d2_ptc: add onewire connector
for LCD eeprom
The DT for sama5d2 xplained is updated to include a onewire node. This is done in patch:
[PATCH v4 34/34] ARM: dts: at91: sama5d4_xplained: add onewire connector
for LCD eeprom
Changes in v4:
- Rebased on latest u-boot/master
- Checked ret value in read function in patch [PATCH v4 19/34] board: atmel: add support for pda detection
Changes in v3:
- add suport for sama5d4 xplained.
- modified the reset ops for the w1-gpio driver to also check for bus release by the memory after the presence pulse. This is done to avoid the case when the bus is being kept indefinitely at low, thus confusing the detection algorithm.
- fixed issue in w1-uclass when the id for the child node was improperly saved
- fixed issue when the gpio driver was returning only FFs but the read buf function error code was not checked.
Changes in v2:
- added support for two more boards: the PTC ek and the SOM1 ek.
- modified the enumerate mechanism, to search through devicetree nodes, the memories are now in device tree, as suggested by Simon Glass. When a serial number is read from the bus, the driver will match it with a corresponding node in device tree.
- modified the probe mechanism for the bus, when trying to get the bus use a different get function that will also probe the driver, regardless of present aliases in DT.
- added bindings for ds24xxx driver and eep_sandbox, because they are referenced from devicetree now.
Eugen Hristev (30):
dt-bindings: W1: w1-gpio: added bindings for w1-gpio
w1: identify devices with w1-eeprom uclass
dt-bindings: w1-eeprom: ds24xxx: create bindings
W1-EEPROM: add sandbox driver
dt-bindings: w1-eeprom: eep_sandbox: create bindings
w1: add command for onewire protocol
pinctrl: sandbox: add gpio onewire w1 group
sandbox: DTS: w1: add node for one wire interface on GPIO
configs: sandbox: add onewire w1 and sandbox eeprom
configs: sama5d2_xplained: add onewire and eeprom drivers
configs: sama5d3_xplained: add onewire and eeprom drivers
configs: sama5d27_som1_ek: add onewire and eeprom drivers
configs: sama5d2_ptc_ek: add onewire and eeprom drivers
configs: sama5d4_xplained: add onewire and eeprom drivers
board: atmel: add support for pda detection
board: sama5d2_xplained: add pda detect call at init time
board: sama5d3_xplained: add pda detect call at init time
board: sama5d27_som1_ek: add pda detect call at init time
board: sama5d2_ptc_ek: add pda detect call at init time
board: sama5d4_xplained: add pda detect call at init time
configs: sama5d2_xplained: add fdt overlay support
configs: sama5d3_xplained: add fdt overlay support
configs: sama5d2_ptc_ek: add fdt overlay support
configs: sama5d27_som1_ek: add fdt overlay support
configs: sama5d4_xplained: add fdt overlay support
ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom
ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom
ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom
ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom
ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eeprom
Maxime Ripard (4):
w1: Add 1-Wire uclass
w1: Add 1-Wire gpio driver
W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs
W1-EEPROM: add support for Maxim DS24 eeprom families
arch/arm/dts/at91-sama5d27_som1_ek.dts | 17 ++ arch/arm/dts/at91-sama5d2_ptc_ek.dts | 17 ++ arch/arm/dts/at91-sama5d2_xplained.dts | 17 ++ arch/arm/dts/at91-sama5d3_xplained.dts | 17 ++ arch/arm/dts/at91-sama5d4_xplained.dts | 16 ++ arch/arm/dts/sama5d2.dtsi | 5 + arch/arm/dts/sama5d3.dtsi | 5 + arch/arm/dts/sama5d4.dtsi | 5 + arch/arm/mach-at91/Kconfig | 2 + arch/sandbox/dts/sandbox.dts | 20 ++ board/atmel/common/board.c | 57 +++++ board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 3 + board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c | 10 + board/atmel/sama5d2_xplained/sama5d2_xplained.c | 3 + board/atmel/sama5d3_xplained/sama5d3_xplained.c | 10 + board/atmel/sama5d4_xplained/sama5d4_xplained.c | 3 + cmd/Kconfig | 7 + cmd/Makefile | 1 + cmd/w1.c | 126 +++++++++++ configs/sama5d27_som1_ek_mmc_defconfig | 5 + configs/sama5d2_ptc_ek_mmc_defconfig | 5 + configs/sama5d2_ptc_ek_nandflash_defconfig | 5 + configs/sama5d2_xplained_mmc_defconfig | 5 + configs/sama5d2_xplained_spiflash_defconfig | 5 + configs/sama5d3_xplained_mmc_defconfig | 5 + configs/sama5d3_xplained_nandflash_defconfig | 5 + configs/sama5d4_xplained_mmc_defconfig | 5 + configs/sama5d4_xplained_nandflash_defconfig | 5 + configs/sama5d4_xplained_spiflash_defconfig | 5 + configs/sandbox_defconfig | 4 + doc/device-tree-bindings/w1-eeprom/ds24xxx.txt | 37 ++++ doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt | 34 +++ doc/device-tree-bindings/w1/w1-gpio.txt | 40 ++++ drivers/Kconfig | 4 + drivers/Makefile | 2 + drivers/pinctrl/pinctrl-sandbox.c | 3 + drivers/w1-eeprom/Kconfig | 29 +++ drivers/w1-eeprom/Makefile | 5 + drivers/w1-eeprom/ds24xxx.c | 55 +++++ drivers/w1-eeprom/eep_sandbox.c | 61 ++++++ drivers/w1-eeprom/w1-eeprom-uclass.c | 116 ++++++++++ drivers/w1/Kconfig | 25 +++ drivers/w1/Makefile | 3 + drivers/w1/w1-gpio.c | 176 +++++++++++++++ drivers/w1/w1-uclass.c | 240 +++++++++++++++++++++ include/dm/uclass-id.h | 2 + include/w1-eeprom.h | 33 +++ include/w1.h | 37 ++++ 48 files changed, 1297 insertions(+) create mode 100644 cmd/w1.c create mode 100644 doc/device-tree-bindings/w1-eeprom/ds24xxx.txt create mode 100644 doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt create mode 100644 doc/device-tree-bindings/w1/w1-gpio.txt create mode 100644 drivers/w1-eeprom/Kconfig create mode 100644 drivers/w1-eeprom/Makefile create mode 100644 drivers/w1-eeprom/ds24xxx.c create mode 100644 drivers/w1-eeprom/eep_sandbox.c create mode 100644 drivers/w1-eeprom/w1-eeprom-uclass.c create mode 100644 drivers/w1/Kconfig create mode 100644 drivers/w1/Makefile create mode 100644 drivers/w1/w1-gpio.c create mode 100644 drivers/w1/w1-uclass.c create mode 100644 include/w1-eeprom.h create mode 100644 include/w1.h
Signature · 1 line
2.7.4
PATCH v4 1/34 w1: Add 1-Wire uclass
From: Maxime Ripard <[email protected]>
We might want to use 1-Wire devices connected on boards such as EEPROMs in U-Boot.
Provide a framework to be able to do that.
--- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/w1/Kconfig | 18 ++++ drivers/w1/Makefile | 1 + drivers/w1/w1-uclass.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + include/w1.h | 36 ++++++++ 7 files changed, 295 insertions(+) create mode 100644 drivers/w1/Kconfig create mode 100644 drivers/w1/Makefile create mode 100644 drivers/w1/w1-uclass.c create mode 100644 include/w1.h
drivers/Kconfig +2 -0
@@ -106,6 +106,8 @@ source "drivers/usb/Kconfig" source "drivers/video/Kconfig" +source "drivers/w1/Kconfig" + source "drivers/watchdog/Kconfig" config PHYS_TO_BUS
drivers/Makefile +1 -0
@@ -105,6 +105,7 @@ obj-y += smem/ obj-y += soc/ obj-y += thermal/ obj-y += axi/ +obj-$(CONFIG_W1) += w1/ obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ endif
drivers/w1/Kconfig new file +18 -0
@@ -0,0 +1,18 @@ +# +# W1 subsystem configuration +# + +menu "1-Wire support" + +config W1 + bool "Enable 1-wire controllers support" + default no + depends on DM + help + Support for the Dallas 1-Wire bus. + +if W1 + +endif + +endmenu
drivers/w1/Makefile new file +1 -0
@@ -0,0 +1 @@ +obj-$(CONFIG_W1) += w1-uclass.o
drivers/w1/w1-uclass.c new file +236 -0
236 lines not on this page · raw message
include/dm/uclass-id.h +1 -0
@@ -92,6 +92,7 @@ enum uclass_id {UCLASS_VIDEO ,/* Video or LCD device */ UCLASS_VIDEO_BRIDGE ,/* Video bridge, e.g. DisplayPort to LVDS */ UCLASS_VIDEO_CONSOLE ,/* Text console driver for video device */ +UCLASS_W1 ,/* Dallas 1-Wire bus */ UCLASS_WDT ,/* Watchdot Timer driver */ UCLASS_COUNT,
include/w1.h new file +36 -0
@@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* Copyright (c) 2015 Free Electrons +* Copyright (c) 2015 NextThing Co +* +*/ + +#ifndef __W1_H +#define __W1_H + +#include <dm.h> + +#define W1_FAMILY_DS24B33 0x23 +#define W1_FAMILY_DS2431 0x2d + +struct w1_device { +u64 id; +}; + +struct w1_ops { +u8 (*read_byte)(struct udevice *dev); +bool (*reset)(struct udevice *dev); +u8 (*triplet)(struct udevice *dev,bool bdir); +void (*write_byte)(struct udevice *dev,u8 byte); +}; + +int w1_get_bus (int busnum,struct udevice **busp); +u8 w1_get_device_family (struct udevice *dev); + +int w1_read_buf (struct udevice *dev,u8 *buf,unsigned int count); +int w1_read_byte (struct udevice *dev); +int w1_reset_select (struct udevice *dev); +int w1_write_buf (struct udevice *dev,u8 *buf,unsigned int count); +int w1_write_byte (struct udevice *dev,u8 byte); + +#endif
Signature · 1 line
2.7.4
PATCH v4 1/34 w1: Add 1-Wire uclass
Quoted 10 lines · Eugen Hristev
From: Maxime Ripard <[email protected]>
We might want to use 1-Wire devices connected on boards such as EEPROMs in U-Boot.
Provide a framework to be able to do that.
Signed-off-by Maxime Ripard <[email protected]>[eugen.hristev at microchip.com: reworked]Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/4ce38342/attachment.sig>
PATCH v4 2/34 w1: Add 1-Wire gpio driver
In reply to Eugen HristevFrom: Maxime Ripard <[email protected]>
Add a bus driver for bitbanging a 1-Wire bus over a GPIO.
--- drivers/w1/Kconfig | 7 ++ drivers/w1/Makefile | 2 + drivers/w1/w1-gpio.c | 176 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 185 insertions(+) create mode 100644 drivers/w1/w1-gpio.c
drivers/w1/Kconfig +7 -0
@@ -13,6 +13,13 @@ config W1 if W1 +config W1_GPIO + bool "Enable 1-wire GPIO bitbanging" + default no + depends on DM_GPIO + help + Emulate a 1-wire bus using a GPIO. + endif endmenu
drivers/w1/Makefile +2 -0
@@ -1 +1,3 @@ obj-$(CONFIG_W1) += w1-uclass.o + +obj-$(CONFIG_W1_GPIO) += w1-gpio.o
drivers/w1/w1-gpio.c new file +176 -0
176 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 2/34 w1: Add 1-Wire gpio driver
Quoted 7 lines · Eugen Hristev
From: Maxime Ripard <[email protected]>
Add a bus driver for bitbanging a 1-Wire bus over a GPIO.
Signed-off-by Maxime Ripard <[email protected]>[eugen.hristev at microchip.com: fixed some issues]Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/ff2d18f7/attachment.sig>
PATCH v4 3/34 dt-bindings: W1: w1-gpio: added bindings for w1-gpio
In reply to Eugen HristevAdded bindings specification for bitbanged gpio driver for Dallas one wire protocol
--- doc/device-tree-bindings/w1/w1-gpio.txt | 40 +++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 doc/device-tree-bindings/w1/w1-gpio.txt
doc/device-tree-bindings/w1/w1-gpio.txt new file +40 -0
@@ -0,0 +1,40 @@ +W1 gpio device binding - one wire protocol over bitbanged gpio +======================= + + +Child nodes are required in device tree. The driver will detect +the devices serial number and then search in the child nodes in the device tree +for the proper node and try to match it with the device. + +Also check doc/device-tree-bindings/w1-eeprom for possible child nodes drivers + +Driver: +- drivers/w1/w1-gpio.c + +Software w1 device-tree node properties: +Required: +* compatible = "w1-gpio"; +* gpios = <...>; + This is the gpio used for one wire protocol, using bitbanging + +Optional: +* none + +Example: + +onewire_tm: onewire { + compatible = "w1-gpio"; + gpios = <&pioA 32 0>; +}; + +Example with child: + +onewire_tm: onewire { + compatible = "w1-gpio"; + gpios = <&pioA 32 0>; + + eeprom1: eeprom at 0 { + compatible = "maxim,ds24xxx"; + } +}; +
Signature · 1 line
2.7.4
PATCH v4 3/34 dt-bindings: W1: w1-gpio: added bindings for w1-gpio
Quoted 4 lines · Eugen Hristev
Added bindings specification for bitbanged gpio driver for Dallas one wire protocol
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/471d97fb/attachment.sig>
PATCH v4 4/34 W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs
In reply to Eugen HristevFrom: Maxime Ripard <[email protected]>
We might want to access data stored onto one wire EEPROMs. Create a framework to provide a consistent API.
--- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/w1-eeprom/Kconfig | 17 +++++ drivers/w1-eeprom/Makefile | 2 + drivers/w1-eeprom/w1-eeprom-uclass.c | 116 +++++++++++++++++++++++++++++++++++ include/dm/uclass-id.h | 1 + include/w1-eeprom.h | 33 ++++++++++ 7 files changed, 172 insertions(+) create mode 100644 drivers/w1-eeprom/Kconfig create mode 100644 drivers/w1-eeprom/Makefile create mode 100644 drivers/w1-eeprom/w1-eeprom-uclass.c create mode 100644 include/w1-eeprom.h
drivers/Kconfig +2 -0
@@ -108,6 +108,8 @@ source "drivers/video/Kconfig" source "drivers/w1/Kconfig" +source "drivers/w1-eeprom/Kconfig" + source "drivers/watchdog/Kconfig" config PHYS_TO_BUS
drivers/Makefile +1 -0
@@ -106,6 +106,7 @@ obj-y += soc/ obj-y += thermal/ obj-y += axi/ obj-$(CONFIG_W1) += w1/ +obj-$(CONFIG_W1_EEPROM) += w1-eeprom/ obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ endif
drivers/w1-eeprom/Kconfig new file +17 -0
@@ -0,0 +1,17 @@ +# +# EEPROM subsystem configuration +# + +menu "1-wire EEPROM support" + +config W1_EEPROM + bool "Enable support for EEPROMs on 1wire interface" + depends on DM + help + Support for the EEPROMs connected on 1-wire Dallas protocol interface + +if W1_EEPROM + +endif + +endmenu
drivers/w1-eeprom/Makefile new file +2 -0
@@ -0,0 +1,2 @@ +obj-$(CONFIG_W1_EEPROM) += w1-eeprom-uclass.o +
drivers/w1-eeprom/w1-eeprom-uclass.c new file +116 -0
116 lines not on this page · raw message
include/dm/uclass-id.h +1 -0
@@ -93,6 +93,7 @@ enum uclass_id {UCLASS_VIDEO_BRIDGE ,/* Video bridge, e.g. DisplayPort to LVDS */ UCLASS_VIDEO_CONSOLE ,/* Text console driver for video device */ UCLASS_W1 ,/* Dallas 1-Wire bus */ +UCLASS_W1_EEPROM ,/* one-wire EEPROMs */ UCLASS_WDT ,/* Watchdot Timer driver */ UCLASS_COUNT,
include/w1-eeprom.h new file +33 -0
@@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0+ +* +* Copyright (c) 2015 Free Electrons +* Copyright (c) 2015 NextThing Co +* Copyright (c) 2018 Microchip Technology, Inc. +* +*/ + +#ifndef __W1_EEPROM_H +#define __W1_EEPROM_H + +struct udevice ; + +struct w1_eeprom_ops { +/* +* Reads a buff from the given EEPROM memory, starting at +* given offset and place the results into the given buffer. +* Should read given count of bytes. +* Should return 0 on success, and normal error.h on error +*/ +int (*read_buf)(struct udevice *dev,unsigned int offset, +u8 *buf,unsigned int count); +}; + +int w1_eeprom_read_buf (struct udevice *dev,unsigned int offset, +u8 *buf,unsigned int count); + +int w1_eeprom_dm_init (void ); + +int w1_eeprom_register_new_device (u64 id); + +int w1_eeprom_get_id (struct udevice *dev,u64 *id); +#endif
Signature · 1 line
2.7.4
PATCH v4 4/34 W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs
Quoted 8 lines · Eugen Hristev
From: Maxime Ripard <[email protected]>
We might want to access data stored onto one wire EEPROMs. Create a framework to provide a consistent API.
Signed-off-by Maxime Ripard <[email protected]>[eugen.hristev at microchip.com: reworked patch]Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/54406d65/attachment.sig>
PATCH v4 5/34 w1: identify devices with w1-eeprom uclass
In reply to Eugen HristevWhen a new device is discovered, this may be a w1 eeprom device. Attempt to find the proper node and driver from the w1-eeprom subsystem.
--- drivers/w1/w1-uclass.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/w1/w1-uclass.c +4 -0
@@ -13,6 +13,7 @@#include <common.h> #include <dm.h> #include <w1.h> +#include <w1-eeprom.h> #include <dm/device-internal.h>
@@ -98,6 +99,9 @@ static int w1_enumerate(struct udevice *bus)debug ("%s: Detected new device 0x%llx (family 0x%x)\n" , bus->name, rn, (u8)(rn &0xff )); + +/* attempt to register as w1-eeprom device */ +w1_eeprom_register_new_device (rn); } }
Signature · 1 line
2.7.4
PATCH v4 5/34 w1: identify devices with w1-eeprom uclass
Quoted 4 lines · Eugen Hristev
When a new device is discovered, this may be a w1 eeprom device. Attempt to find the proper node and driver from the w1-eeprom subsystem.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/73a66c03/attachment.sig>
PATCH v4 6/34 W1-EEPROM: add support for Maxim DS24 eeprom families
In reply to Eugen HristevFrom: Maxime Ripard <[email protected]>
Add a driver that supports Maxim 1 wire EEPROMs families DS24B33 and DS2431.
Can be extended for other families as well.
--- drivers/w1-eeprom/Kconfig | 6 +++++ drivers/w1-eeprom/Makefile | 2 ++ drivers/w1-eeprom/ds24xxx.c | 55 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+) create mode 100644 drivers/w1-eeprom/ds24xxx.c
drivers/w1-eeprom/Kconfig +6 -0
@@ -12,6 +12,12 @@ config W1_EEPROM if W1_EEPROM +config W1_EEPROM_DS24XXX + bool "Enable Maxim DS24 families EEPROM support" + depends on W1 + help + Maxim DS24 EEPROMs 1-Wire EEPROM support + endif endmenu
drivers/w1-eeprom/Makefile +2 -0
@@ -1,2 +1,4 @@ obj-$(CONFIG_W1_EEPROM) += w1-eeprom-uclass.o +obj-$(CONFIG_W1_EEPROM_DS24XXX) += ds24xxx.o +
drivers/w1-eeprom/ds24xxx.c new file +55 -0
55 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 6/34 W1-EEPROM: add support for Maxim DS24 eeprom families
Quoted 9 lines · Eugen Hristev
From: Maxime Ripard <[email protected]>
Add a driver that supports Maxim 1 wire EEPROMs families DS24B33 and DS2431.
Can be extended for other families as well.Signed-off-by Maxime Ripard <[email protected]>[eugen.hristev at microchip.com: reworked driver]Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/c6f1fe4f/attachment.sig>
PATCH v4 7/34 dt-bindings: w1-eeprom: ds24xxx: create bindings
In reply to Eugen HristevBindings for Maxim's ds24 onewire EEPROM families driver
--- doc/device-tree-bindings/w1-eeprom/ds24xxx.txt | 37 ++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 doc/device-tree-bindings/w1-eeprom/ds24xxx.txt
doc/device-tree-bindings/w1-eeprom/ds24xxx.txt new file +37 -0
@@ -0,0 +1,37 @@ +Maxim DS24 families driver device binding - one wire protocol EEPROMS from Maxim +======================= + +This memory needs to be connected to a onewire bus, as a child node. +The bus will read the device serial number and match this node with a found +device on the bus +Also check doc/device-tree-bindings/w1 for onewire bus drivers + +Driver: +- drivers/w1-eeprom/ds24xxx.c + +Software ds24xxx device-tree node properties: +Required: +* compatible = "maxim,ds24b33" +or +* compatible = "maxim,ds2431" +Further memories can be added. + +Optional: +* none + +Example: + eeprom1: eeprom at 0 { + compatible = "maxim,ds24xxx"; + } + +Example with parent bus: + +onewire_tm: onewire { + compatible = "w1-gpio"; + gpios = <&pioA 32 0>; + + eeprom1: eeprom at 0 { + compatible = "maxim,ds24xxx"; + } +}; +
Signature · 1 line
2.7.4
PATCH v4 7/34 dt-bindings: w1-eeprom: ds24xxx: create bindings
Quoted 3 lines · Eugen Hristev
Bindings for Maxim's ds24 onewire EEPROM families driver
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/9f6fd83d/attachment.sig>
PATCH v4 8/34 W1-EEPROM: add sandbox driver
In reply to Eugen HristevAdd a sandbox driver for a one wire EEPROM memory
--- drivers/w1-eeprom/Kconfig | 6 ++++ drivers/w1-eeprom/Makefile | 1 + drivers/w1-eeprom/eep_sandbox.c | 61 +++++++++++++++++++++++++++++++++++++++++ include/w1.h | 1 + 4 files changed, 69 insertions(+) create mode 100644 drivers/w1-eeprom/eep_sandbox.c
drivers/w1-eeprom/Kconfig +6 -0
@@ -18,6 +18,12 @@ config W1_EEPROM_DS24XXX help Maxim DS24 EEPROMs 1-Wire EEPROM support +config W1_EEPROM_SANDBOX + bool "Enable sandbox onewire EEPROM driver" + depends on W1 + help + Sandbox driver for a onewire EEPROM memory + endif endmenu
drivers/w1-eeprom/Makefile +1 -0
@@ -2,3 +2,4 @@ obj-$(CONFIG_W1_EEPROM) += w1-eeprom-uclass.o obj-$(CONFIG_W1_EEPROM_DS24XXX) += ds24xxx.o +obj-$(CONFIG_W1_EEPROM_SANDBOX) += eep_sandbox.o
drivers/w1-eeprom/eep_sandbox.c new file +61 -0
61 lines not on this page · raw message
include/w1.h +1 -0
@@ -12,6 +12,7 @@#define W1_FAMILY_DS24B33 0x23#define W1_FAMILY_DS2431 0x2d +#define W1_FAMILY_EEP_SANDBOX 0xfestruct w1_device {u64 id;
Signature · 1 line
2.7.4
PATCH v4 8/34 W1-EEPROM: add sandbox driver
Quoted 3 lines · Eugen Hristev
Add a sandbox driver for a one wire EEPROM memory
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/2220a598/attachment.sig>
PATCH v4 9/34 dt-bindings: w1-eeprom: eep_sandbox: create bindings
In reply to Eugen HristevBindings for sandbox onewire eeprom driver
--- doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt
doc/device-tree-bindings/w1-eeprom/eep_sandbox.txt new file +34 -0
@@ -0,0 +1,34 @@ +Onewire EEPROM sandbox driver device binding - one wire protocol sandbox EEPROM +======================= + +This memory needs to be connected to a onewire bus, as a child node. +The bus will read the device serial number and match this node with a found +device on the bus +Also check doc/device-tree-bindings/w1 for onewire bus drivers + +Driver: +- drivers/w1-eeprom/eep_sandbox.c + +Software ds24xxx device-tree node properties: +Required: +* compatible = "sandbox,w1-eeprom" + +Optional: +* none + +Example: + eeprom1: eeprom at 0 { + compatible = "sandbox,w1-eeprom"; + } + +Example with parent bus: + +onewire_tm: onewire { + compatible = "w1-gpio"; + gpios = <&gpio_a 8>; + + eeprom1: eeprom at 0 { + compatible = "sandbox,w1-eeprom"; + } +}; +
Signature · 1 line
2.7.4
PATCH v4 9/34 dt-bindings: w1-eeprom: eep_sandbox: create bindings
Quoted 3 lines · Eugen Hristev
Bindings for sandbox onewire eeprom driver
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/105a8f3e/attachment.sig>
PATCH v4 10/34 w1: add command for onewire protocol
In reply to Eugen HristevAdd basic command for bus information and read for onewire bus using Dallas 1-Wire protocol.
--- cmd/Kconfig | 7 ++++ cmd/Makefile | 1 + cmd/w1.c | 126 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 cmd/w1.c
cmd/Kconfig +7 -0
@@ -832,6 +832,13 @@ config CMD_I2C help I2C support. +config CMD_W1 + depends on W1 + default y if W1 + bool "w1 - Support for Dallas 1-Wire protocol" + help + Dallas 1-wire protocol support + config CMD_LOADB bool "loadb" default y
cmd/Makefile +1 -0
@@ -145,6 +145,7 @@ obj-$(CONFIG_CMD_THOR_DOWNLOAD) += thordown.o obj-$(CONFIG_CMD_XIMG) += ximg.o obj-$(CONFIG_CMD_YAFFS2) += yaffs2.o obj-$(CONFIG_CMD_SPL) += spl.o +obj-$(CONFIG_CMD_W1) += w1.o obj-$(CONFIG_CMD_ZIP) += zip.o obj-$(CONFIG_CMD_ZFS) += zfs.o
cmd/w1.c new file +126 -0
126 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v4 10/34 w1: add command for onewire protocol
Quoted 4 lines · Eugen Hristev
Add basic command for bus information and read for onewire bus using Dallas 1-Wire protocol.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/6f0f474f/attachment.sig>
PATCH v4 11/34 pinctrl: sandbox: add gpio onewire w1 group
In reply to Eugen HristevAdd onewire "w1" groups and pin function for onewire GPIOs in sandbox.
--- drivers/pinctrl/pinctrl-sandbox.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/pinctrl/pinctrl-sandbox.c +3 -0
@@ -14,6 +14,7 @@ static const char * const sandbox_pins[] = {"SDA" ,"TX" ,"RX" , +"W1" }; static const char * const sandbox_groups[] = {
@@ -21,12 +22,14 @@ static const char * const sandbox_groups[] = {"serial_a" ,"serial_b" ,"spi" , + "w1", };static const char *const sandbox_functions[] = {"i2c" ,"serial" ,"spi" , +"w1" , }; static const struct pinconf_param sandbox_conf_params[] = {
Signature · 1 line
2.7.4
PATCH v4 11/34 pinctrl: sandbox: add gpio onewire w1 group
Quoted 3 lines · Eugen Hristev
Add onewire "w1" groups and pin function for onewire GPIOs in sandbox.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/5d7756a2/attachment.sig>
PATCH v4 12/34 sandbox: DTS: w1: add node for one wire interface on GPIO
In reply to Eugen HristevAdd a node for the one wire uclass and one wire gpio driver in sandbox.
--- arch/sandbox/dts/sandbox.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
arch/sandbox/dts/sandbox.dts +20 -0
@@ -153,6 +153,7 @@ pinctrl { compatible = "sandbox,pinctrl"; + status = "okay"; pinctrl_i2c0: i2c0 { groups = "i2c";
@@ -164,6 +165,12 @@ groups = "serial_a"; function = "serial"; }; + + pinctrl_onewire0: onewire0 { + groups = "w1"; + function = "w1"; + bias-pull-up; + }; }; reset at 1 {
@@ -322,6 +329,19 @@ reg = <0x0 0x400>; }; }; + + onewire0: onewire { + compatible = "w1-gpio"; + gpios = <&gpio_a 8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_onewire0>; + status = "okay"; + + sandbox_eeprom0: sandbox_eeprom at 0 { + compatible = "sandbox,w1-eeprom"; + status = "okay"; + }; + }; }; #include "cros-ec-keyboard.dtsi"
Signature · 1 line
2.7.4
PATCH v4 12/34 sandbox: DTS: w1: add node for one wire interface on GPIO
Quoted 4 lines · Eugen Hristev
Add a node for the one wire uclass and one wire gpio driver in sandbox.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/24c8a0ec/attachment.sig>
PATCH v4 13/34 configs: sandbox: add onewire w1 and sandbox eeprom
In reply to Eugen HristevTo be able to test Dallas onewire protocol and one wire eeproms driver and subsystem, add in sandbox defconfig the drivers' config.
--- configs/sandbox_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
configs/sandbox_defconfig +4 -0
@@ -191,6 +191,10 @@ CONFIG_CONSOLE_ROTATION=y CONFIG_CONSOLE_TRUETYPE=y CONFIG_CONSOLE_TRUETYPE_CANTORAONE=y CONFIG_VIDEO_SANDBOX_SDL=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_SANDBOX=y CONFIG_WDT=y CONFIG_WDT_SANDBOX=y CONFIG_FS_CBFS=y
Signature · 1 line
2.7.4
PATCH v4 13/34 configs: sandbox: add onewire w1 and sandbox eeprom
Quoted 4 lines · Eugen Hristev
To be able to test Dallas onewire protocol and one wire eeproms driver and subsystem, add in sandbox defconfig the drivers' config.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/de891933/attachment.sig>
PATCH v4 14/34 configs: sama5d2_xplained: add onewire and eeprom drivers
In reply to Eugen HristevSAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
--- configs/sama5d2_xplained_mmc_defconfig | 4 ++++ configs/sama5d2_xplained_spiflash_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
configs/sama5d2_xplained_mmc_defconfig +4 -0
@@ -88,3 +88,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_DM_VIDEO=y CONFIG_ATMEL_HLCD=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
configs/sama5d2_xplained_spiflash_defconfig +4 -0
@@ -85,3 +85,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_DM_VIDEO=y CONFIG_ATMEL_HLCD=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
Signature · 1 line
2.7.4
PATCH v4 14/34 configs: sama5d2_xplained: add onewire and eeprom drivers
Quoted 6 lines · Eugen Hristev
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/6769b446/attachment.sig>
PATCH v4 15/34 configs: sama5d3_xplained: add onewire and eeprom drivers
In reply to Eugen HristevSAMA5D3 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
--- configs/sama5d3_xplained_mmc_defconfig | 4 ++++ configs/sama5d3_xplained_nandflash_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
configs/sama5d3_xplained_mmc_defconfig +4 -0
@@ -76,3 +76,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
configs/sama5d3_xplained_nandflash_defconfig +4 -0
@@ -72,4 +72,8 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y CONFIG_FAT_WRITE=y
Signature · 1 line
2.7.4
PATCH v4 15/34 configs: sama5d3_xplained: add onewire and eeprom drivers
Quoted 6 lines · Eugen Hristev
SAMA5D3 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/9a6bdc5b/attachment.sig>
PATCH v4 16/34 configs: sama5d27_som1_ek: add onewire and eeprom drivers
In reply to Eugen HristevSAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
--- configs/sama5d27_som1_ek_mmc_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
configs/sama5d27_som1_ek_mmc_defconfig +4 -0
@@ -88,3 +88,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_DM_VIDEO=y CONFIG_ATMEL_HLCD=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
Signature · 1 line
2.7.4
PATCH v4 16/34 configs: sama5d27_som1_ek: add onewire and eeprom drivers
Quoted 6 lines · Eugen Hristev
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/4dc337aa/attachment.sig>
PATCH v4 17/34 configs: sama5d2_ptc_ek: add onewire and eeprom drivers
In reply to Eugen HristevSAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
--- configs/sama5d2_ptc_ek_mmc_defconfig | 4 ++++ configs/sama5d2_ptc_ek_nandflash_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
configs/sama5d2_ptc_ek_mmc_defconfig +4 -0
@@ -63,3 +63,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
configs/sama5d2_ptc_ek_nandflash_defconfig +4 -0
@@ -62,3 +62,7 @@ CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
Signature · 1 line
2.7.4
PATCH v4 17/34 configs: sama5d2_ptc_ek: add onewire and eeprom drivers
Quoted 6 lines · Eugen Hristev
SAMA5D2 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/140e7491/attachment.sig>
PATCH v4 18/34 configs: sama5d4_xplained: add onewire and eeprom drivers
In reply to Eugen HristevSAMA5D4 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.
--- configs/sama5d4_xplained_mmc_defconfig | 4 ++++ configs/sama5d4_xplained_nandflash_defconfig | 4 ++++ configs/sama5d4_xplained_spiflash_defconfig | 4 ++++ 3 files changed, 12 insertions(+)
configs/sama5d4_xplained_mmc_defconfig +4 -0
@@ -84,3 +84,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_DM_VIDEO=y CONFIG_ATMEL_HLCD=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
configs/sama5d4_xplained_nandflash_defconfig +4 -0
@@ -80,3 +80,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_DM_VIDEO=y CONFIG_ATMEL_HLCD=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
configs/sama5d4_xplained_spiflash_defconfig +4 -0
@@ -84,3 +84,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y CONFIG_DM_VIDEO=y CONFIG_ATMEL_HLCD=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y
Signature · 1 line
2.7.4
PATCH v4 18/34 configs: sama5d4_xplained: add onewire and eeprom drivers
Quoted 6 lines · Eugen Hristev
SAMA5D4 SoC can have extra clip boards (PDAs) connected, which have an EEPROM memory for identification. A special GPIO can be used to read this memory over 1wire protocol.
Enabling one wire and eeprom drivers for this memory.Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/b12f518d/attachment.sig>
PATCH v4 19/34 board: atmel: add support for pda detection
In reply to Eugen HristevThis adds the support for PDA detection as common code for Atmel boards.
Using the one wire interface over GPIO , an EEPROM memory is read and compared to preprogrammed values for PDA screens TM4300, TM7000 and TM7000B.
Once the PDA is detected, an environment variable is set accordingly.
--- board/atmel/common/board.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)
board/atmel/common/board.c +57 -0
@@ -5,7 +5,64 @@*/ #include <common.h> +#include <w1.h> +#include <w1-eeprom.h> +#include <dm/device-internal.h> + +#define AT91_PDA_EEPROM_ID_OFFSET 15 +#define AT91_PDA_EEPROM_ID_LENGTH 5 +#define AT91_PDA_EEPROM_DEFAULT_BUS 0void dummy (void ) { } + +#if definedCONFIG_W1 +void at91_pda_detect (void ) +{ +struct udevice *bus, *dev; +u8 buf[AT91_PDA_EEPROM_ID_LENGTH +1 ] = {0 }; +int ret; +int pda =0 ; + + ret =w1_get_bus (AT91_PDA_EEPROM_DEFAULT_BUS , &bus); +if (ret) +return ; + +for (device_find_first_child (bus, &dev); + dev; +device_find_next_child (&dev)) { + ret =device_probe (dev); +if (ret) { +continue ; + }else { + ret =w1_eeprom_read_buf (dev,AT91_PDA_EEPROM_ID_OFFSET , + (u8 *)buf,AT91_PDA_EEPROM_ID_LENGTH ); +if (ret) +return ; +break ; + } + } + pda =simple_strtoul ((const char *)buf,NULL ,10 ); + +switch (pda) { +case 7000 : +if (buf[4 ] =='B' ) +printf ("PDA TM7000B detected\n" ); +else +printf ("PDA TM7000 detected\n" ); +break ; +case 4300 : +printf ("PDA TM4300 detected\n" ); +break ; +case 5000 : +printf ("PDA TM5000 detected\n" ); +break ; + } +env_set ("pda" , (const char *)buf); +} +#else +void at91_pda_detect (void ) +{ +} +#endif
Signature · 1 line
2.7.4
PATCH v4 19/34 board: atmel: add support for pda detection
Quoted 8 lines · Eugen Hristev
This adds the support for PDA detection as common code for Atmel boards.
Using the one wire interface over GPIO , an EEPROM memory is read and compared to preprogrammed values for PDA screens TM4300, TM7000 and TM7000B.
Once the PDA is detected, an environment variable is set accordingly.Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/f0ddb34a/attachment.sig>
PATCH v4 20/34 board: sama5d2_xplained: add pda detect call at init time
In reply to Eugen HristevCall the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
--- board/atmel/sama5d2_xplained/sama5d2_xplained.c | 3 +++ 1 file changed, 3 insertions(+)
board/atmel/sama5d2_xplained/sama5d2_xplained.c +3 -0
@@ -15,6 +15,8 @@#include <asm/arch/gpio.h> #include <asm/arch/sama5d2.h> +extern void at91_pda_detect (void ); +DECLARE_GLOBAL_DATA_PTR ;static void board_usb_hw_init (void )
@@ -28,6 +30,7 @@ int board_late_init(void)#ifdef CONFIG_DM_VIDEO at91_video_show_board_info ();#endif +at91_pda_detect (); return 0; }#endif
Signature · 1 line
2.7.4
PATCH v4 20/34 board: sama5d2_xplained: add pda detect call at init time
Quoted 4 lines · Eugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/8daacff7/attachment.sig>
PATCH v4 21/34 board: sama5d3_xplained: add pda detect call at init time
In reply to Eugen HristevCall the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
--- arch/arm/mach-at91/Kconfig | 1 + board/atmel/sama5d3_xplained/sama5d3_xplained.c | 10 ++++++++++ 2 files changed, 11 insertions(+)
arch/arm/mach-at91/Kconfig +1 -0
@@ -177,6 +177,7 @@ config TARGET_SAMA5D3_XPLAINED select BOARD_EARLY_INIT_F select SAMA5D3 select SUPPORT_SPL + select BOARD_LATE_INIT config TARGET_SAMA5D3XEK bool "SAMA5D3X-EK board"
board/atmel/sama5d3_xplained/sama5d3_xplained.c +10 -0
@@ -18,6 +18,8 @@DECLARE_GLOBAL_DATA_PTR ; +extern void at91_pda_detect (void ); +#ifdef CONFIG_NAND_ATMEL void sama5d3_xplained_nand_hw_init (void ) {
@@ -72,6 +74,14 @@ void board_debug_uart_init(void) }#endif +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +at91_pda_detect (); +return 0 ; +} +#endif +#ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f (void ) {
Signature · 1 line
2.7.4
PATCH v4 21/34 board: sama5d3_xplained: add pda detect call at init time
Quoted 4 lines · Eugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/3c60c172/attachment.sig>
PATCH v4 22/34 board: sama5d27_som1_ek: add pda detect call at init time
In reply to Eugen HristevCall the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
--- board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c | 3 +++ 1 file changed, 3 insertions(+)
board/atmel/sama5d27_som1_ek/sama5d27_som1_ek.c +3 -0
@@ -15,6 +15,8 @@#include <asm/arch/gpio.h> #include <asm/arch/sama5d2.h> +extern void at91_pda_detect (void ); +DECLARE_GLOBAL_DATA_PTR ;static void board_usb_hw_init (void )
@@ -28,6 +30,7 @@ int board_late_init(void)#ifdef CONFIG_DM_VIDEO at91_video_show_board_info ();#endif +at91_pda_detect (); return 0; }#endif
Signature · 1 line
2.7.4
PATCH v4 22/34 board: sama5d27_som1_ek: add pda detect call at init time
Quoted 4 lines · Eugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/dc0867a2/attachment.sig>
PATCH v4 23/34 board: sama5d2_ptc_ek: add pda detect call at init time
In reply to Eugen HristevCall the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
--- arch/arm/mach-at91/Kconfig | 1 + board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c | 10 ++++++++++ 2 files changed, 11 insertions(+)
arch/arm/mach-at91/Kconfig +1 -0
@@ -151,6 +151,7 @@ config TARGET_SAMA5D2_PTC_EK bool "SAMA5D2 PTC EK board" select BOARD_EARLY_INIT_F select SAMA5D2 + select BOARD_LATE_INIT config TARGET_SAMA5D2_XPLAINED bool "SAMA5D2 Xplained board"
board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c +10 -0
@@ -20,6 +20,8 @@#include <asm/arch/sama5d2.h> #include <asm/arch/sama5d2_smc.h> +extern void at91_pda_detect (void ); +DECLARE_GLOBAL_DATA_PTR ;#ifdef CONFIG_NAND_ATMEL
@@ -65,6 +67,14 @@ static void board_nand_hw_init(void) }#endif +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +at91_pda_detect (); +return 0 ; +} +#endif +static void board_usb_hw_init (void ) {atmel_pio4_set_pio_output (AT91_PIO_PORTB ,12 ,ATMEL_PIO_PUEN_MASK );
Signature · 1 line
2.7.4
PATCH v4 23/34 board: sama5d2_ptc_ek: add pda detect call at init time
Quoted 4 lines · Eugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/dc8779cd/attachment.sig>
PATCH v4 24/34 board: sama5d4_xplained: add pda detect call at init time
In reply to Eugen HristevCall the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
--- board/atmel/sama5d4_xplained/sama5d4_xplained.c | 3 +++ 1 file changed, 3 insertions(+)
board/atmel/sama5d4_xplained/sama5d4_xplained.c +3 -0
@@ -17,6 +17,8 @@DECLARE_GLOBAL_DATA_PTR ; +extern void at91_pda_detect (void ); +#ifdef CONFIG_NAND_ATMEL static void sama5d4_xplained_nand_hw_init (void ) {
@@ -71,6 +73,7 @@ static void sama5d4_xplained_usb_hw_init(void)#ifdef CONFIG_BOARD_LATE_INIT int board_late_init (void ) { +at91_pda_detect ();#ifdef CONFIG_DM_VIDEO at91_video_show_board_info ();#endif
Signature · 1 line
2.7.4
PATCH v4 24/34 board: sama5d4_xplained: add pda detect call at init time
Quoted 4 lines · Eugen Hristev
Call the PDA detection mechanism at boot time so we can have the pda environment variable ready for use.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/b48f9397/attachment.sig>
PATCH v4 25/34 configs: sama5d2_xplained: add fdt overlay support
In reply to Eugen HristevAdd commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
--- configs/sama5d2_xplained_mmc_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/sama5d2_xplained_mmc_defconfig +1 -0
@@ -92,3 +92,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
configs/sama5d2_xplained_spiflash_defconfig +1 -0
@@ -89,3 +89,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.7.4
PATCH v4 25/34 configs: sama5d2_xplained: add fdt overlay support
Quoted 4 lines · Eugen Hristev
Add commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/693158b0/attachment.sig>
PATCH v4 26/34 configs: sama5d3_xplained: add fdt overlay support
In reply to Eugen HristevAdd commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
--- configs/sama5d3_xplained_mmc_defconfig | 1 + configs/sama5d3_xplained_nandflash_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/sama5d3_xplained_mmc_defconfig +1 -0
@@ -80,3 +80,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
configs/sama5d3_xplained_nandflash_defconfig +1 -0
@@ -77,3 +77,4 @@ CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y CONFIG_FAT_WRITE=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.7.4
PATCH v4 26/34 configs: sama5d3_xplained: add fdt overlay support
Quoted 4 lines · Eugen Hristev
Add commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/d90a96e0/attachment.sig>
PATCH v4 27/34 configs: sama5d2_ptc_ek: add fdt overlay support
In reply to Eugen HristevAdd commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
--- configs/sama5d2_ptc_ek_mmc_defconfig | 1 + configs/sama5d2_ptc_ek_nandflash_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/sama5d2_ptc_ek_mmc_defconfig +1 -0
@@ -67,3 +67,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
configs/sama5d2_ptc_ek_nandflash_defconfig +1 -0
@@ -66,3 +66,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.7.4
PATCH v4 27/34 configs: sama5d2_ptc_ek: add fdt overlay support
Quoted 4 lines · Eugen Hristev
Add commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/4ab37f3d/attachment.sig>
PATCH v4 28/34 configs: sama5d27_som1_ek: add fdt overlay support
In reply to Eugen HristevAdd commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
--- configs/sama5d27_som1_ek_mmc_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/sama5d27_som1_ek_mmc_defconfig +1 -0
@@ -92,3 +92,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.7.4
PATCH v4 28/34 configs: sama5d27_som1_ek: add fdt overlay support
Quoted 4 lines · Eugen Hristev
Add commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/6aee4de8/attachment.sig>
PATCH v4 29/34 configs: sama5d4_xplained: add fdt overlay support
In reply to Eugen HristevAdd commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
--- configs/sama5d4_xplained_mmc_defconfig | 1 + configs/sama5d4_xplained_nandflash_defconfig | 1 + configs/sama5d4_xplained_spiflash_defconfig | 1 + 3 files changed, 3 insertions(+)
configs/sama5d4_xplained_mmc_defconfig +1 -0
@@ -88,3 +88,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
configs/sama5d4_xplained_nandflash_defconfig +1 -0
@@ -84,3 +84,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
configs/sama5d4_xplained_spiflash_defconfig +1 -0
@@ -88,3 +88,4 @@ CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.7.4
PATCH v4 29/34 configs: sama5d4_xplained: add fdt overlay support
Quoted 4 lines · Eugen Hristev
Add commands for fdt overlay merging. This is required for the boot scripts that detect PDAs and apply specific overlays to the DTB passed on to kernel.
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/f03c958b/attachment.sig>
PATCH v4 30/34 ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom
In reply to Eugen HristevAdd onewire node in device tree for TM series LCDs
--- arch/arm/dts/at91-sama5d2_xplained.dts | 17 +++++++++++++++++ arch/arm/dts/sama5d2.dtsi | 5 +++++ 2 files changed, 22 insertions(+)
arch/arm/dts/at91-sama5d2_xplained.dts +17 -0
@@ -11,6 +11,18 @@ stdout-path = &uart1; }; + onewire_tm: onewire { + gpios = <&pioA PIN_PB0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_onewire_tm_default>; + status = "okay"; + + w1_eeprom: w1_eeprom at 0 { + compatible = "maxim,ds24b33"; + status = "okay"; + }; + }; + ahb { usb1: ohci at 00400000 { num-ports = <3>;
@@ -270,6 +282,11 @@ pinmux = <PIN_PA31__GPIO>; bias-disable; }; + + pinctrl_onewire_tm_default: onewire_tm_default { + pinmux = <PIN_PB0__GPIO>; + bias-pull-up; + }; }; }; };
arch/arm/dts/sama5d2.dtsi +5 -0
@@ -769,4 +769,9 @@ }; }; }; + + onewire_tm: onewire { + compatible = "w1-gpio"; + status = "disabled"; + }; };
Signature · 1 line
2.7.4
PATCH v4 30/34 ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom
Quoted 3 lines · Eugen Hristev
Add onewire node in device tree for TM series LCDs
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/5544c31c/attachment.sig>
PATCH v4 31/34 ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom
In reply to Eugen HristevAdd onewire node in device tree for TM series LCDs
--- arch/arm/dts/at91-sama5d3_xplained.dts | 17 +++++++++++++++++ arch/arm/dts/sama5d3.dtsi | 5 +++++ 2 files changed, 22 insertions(+)
arch/arm/dts/at91-sama5d3_xplained.dts +17 -0
@@ -36,6 +36,18 @@ }; }; + onewire_tm: onewire { + gpios = <&pioE 23 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_onewire_tm_default>; + status = "okay"; + + w1_eeprom: w1_eeprom at 0 { + compatible = "maxim,ds24b33"; + status = "okay"; + }; + }; + ahb { apb { mmc0: mmc at f0000000 {
@@ -243,6 +255,11 @@ atmel,pins = <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */ }; + + pinctrl_onewire_tm_default: onewire_tm_default { + atmel,pins = + <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; };
arch/arm/dts/sama5d3.dtsi +5 -0
@@ -1534,4 +1534,9 @@ }; }; }; + + onewire_tm: onewire { + compatible = "w1-gpio"; + status = "disabled"; + }; };
Signature · 1 line
2.7.4
PATCH v4 31/34 ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom
Quoted 3 lines · Eugen Hristev
Add onewire node in device tree for TM series LCDs
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/65026a59/attachment.sig>
PATCH v4 32/34 ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom
In reply to Eugen HristevAdd onewire node in device tree for TM series LCDs
--- arch/arm/dts/at91-sama5d27_som1_ek.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/arm/dts/at91-sama5d27_som1_ek.dts +17 -0
@@ -54,6 +54,18 @@ stdout-path = &uart1; }; + onewire_tm: onewire { + gpios = <&pioA 17 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_onewire_tm_default>; + status = "okay"; + + w1_eeprom: w1_eeprom at 0 { + compatible = "maxim,ds24b33"; + status = "okay"; + }; + }; + ahb { usb1: ohci at 00400000 { num-ports = <3>;
@@ -208,6 +220,11 @@ pinmux = <PIN_PA31__GPIO>; bias-disable; }; + + pinctrl_onewire_tm_default: onewire_tm_default { + pinmux = <PIN_PA17__GPIO>; + bias-pull-up; + }; }; }; };
Signature · 1 line
2.7.4
PATCH v4 32/34 ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom
Quoted 3 lines · Eugen Hristev
Add onewire node in device tree for TM series LCDs
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/45e24d85/attachment.sig>
PATCH v4 33/34 ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom
In reply to Eugen HristevAdd onewire node in device tree for TM series LCDs
--- arch/arm/dts/at91-sama5d2_ptc_ek.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/arm/dts/at91-sama5d2_ptc_ek.dts +17 -0
@@ -56,6 +56,18 @@ stdout-path = &uart0; }; + onewire_tm: onewire { + gpios = <&pioA PIN_PB31 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_onewire_tm_default>; + status = "okay"; + + w1_eeprom: w1_eeprom at 0 { + compatible = "maxim,ds24b33"; + status = "okay"; + }; + }; + ahb { usb0: gadget at 00300000 { atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
@@ -208,6 +220,11 @@ pinmux = <PIN_PB11__GPIO>; bias-disable; }; + + pinctrl_onewire_tm_default: onewire_tm_default { + pinmux = <PIN_PB31__GPIO>; + bias-pull-up; + }; }; }; };
Signature · 1 line
2.7.4
PATCH v4 33/34 ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom
Quoted 3 lines · Eugen Hristev
Add onewire node in device tree for TM series LCDs
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/14755199/attachment.sig>
PATCH v4 34/34 ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eeprom
In reply to Eugen HristevAdd onewire node in device tree for TM series LCDs
--- arch/arm/dts/at91-sama5d4_xplained.dts | 16 ++++++++++++++++ arch/arm/dts/sama5d4.dtsi | 5 +++++ 2 files changed, 21 insertions(+)
arch/arm/dts/at91-sama5d4_xplained.dts +16 -0
@@ -58,6 +58,18 @@ stdout-path = &usart3; }; + onewire_tm: onewire { + gpios = <&pioE 15 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_onewire_tm_default>; + status = "okay"; + + w1_eeprom: w1_eeprom at 0 { + compatible = "maxim,ds24b33"; + status = "okay"; + }; + }; + memory { reg = <0x20000000 0x20000000>; };
@@ -199,6 +211,10 @@ atmel,pins = <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_onewire_tm_default: onewire_tm_default { + atmel,pins = + <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; }; }; };
arch/arm/dts/sama5d4.dtsi +5 -0
@@ -1913,4 +1913,9 @@ }; }; }; + + onewire_tm: onewire { + compatible = "w1-gpio"; + status = "disabled"; + }; };
Signature · 1 line
2.7.4
PATCH v4 34/34 ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eeprom
Quoted 3 lines · Eugen Hristev
Add onewire node in device tree for TM series LCDs
Signed-off-by Eugen Hristev <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/09735a73/attachment.sig>