Skip to contentSkip to conversation

drm/fsl-dcu: drop unused drm_crtc_index()

PATCH In review Stefan Agner 2 participants 4 messages Sep 26, 2018 – Oct 1, 2018

Subsystems (3)
lore
Share & tools
lore

Stefan Agner

author maintainer
#0 lore raw

PATCH 1/2 drm/fsl-dcu: drop unused drm_crtc_index()

The result of drm_crtc_index() is unused. Remove the call and the unused variable.

---
This is a split version of a patch posted a while ago:
https://lore.kernel.org/patchwork/patch/903786/

 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +1 -2
index 0e3752437e44..05d1c9977395 100644
@@ -85,9 +85,8 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
 	struct drm_connector *con = &fsl_dev->connector.base;
 	struct drm_display_mode *mode = &crtc->state->mode;
-	unsigned int hbp, hfp, hsw, vbp, vfp, vsw, index, pol = 0;
+	unsigned int hbp, hfp, hsw, vbp, vfp, vsw, pol = 0;
 
-	index = drm_crtc_index(crtc);
 	clk_set_rate(fsl_dev->pix_clk, mode->clock * 1000);
 
 	/* Configure timings: */
Signature · 1 line
2.19.0
author maintainer
#1 lore raw

PATCH 2/2 drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parameters

From: Satendra Singh Thakur <[email protected]>

Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length.

---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 32 ++++++++++------------
 1 file changed, 14 insertions(+), 18 deletions(-)
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +14 -18
index 05d1c9977395..18afc94e4dff 100644
@@ -17,6 +17,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <video/videomode.h>
 
 #include "fsl_dcu_drm_crtc.h"
 #include "fsl_dcu_drm_drv.h"
@@ -85,39 +86,34 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
 	struct drm_connector *con = &fsl_dev->connector.base;
 	struct drm_display_mode *mode = &crtc->state->mode;
-	unsigned int hbp, hfp, hsw, vbp, vfp, vsw, pol = 0;
+	unsigned int pol = 0;
+	struct videomode vm;
 
 	clk_set_rate(fsl_dev->pix_clk, mode->clock * 1000);
 
-	/* Configure timings: */
-	hbp = mode->htotal - mode->hsync_end;
-	hfp = mode->hsync_start - mode->hdisplay;
-	hsw = mode->hsync_end - mode->hsync_start;
-	vbp = mode->vtotal - mode->vsync_end;
-	vfp = mode->vsync_start - mode->vdisplay;
-	vsw = mode->vsync_end - mode->vsync_start;
+	drm_display_mode_to_videomode(mode, &vm);
 
 	/* INV_PXCK as default (most display sample data on rising edge) */
 	if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE))
 		pol |= DCU_SYN_POL_INV_PXCK;
 
-	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+	if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
 		pol |= DCU_SYN_POL_INV_HS_LOW;
 
-	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
 		pol |= DCU_SYN_POL_INV_VS_LOW;
 
 	regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
-		     DCU_HSYN_PARA_BP(hbp) |
-		     DCU_HSYN_PARA_PW(hsw) |
-		     DCU_HSYN_PARA_FP(hfp));
+		     DCU_HSYN_PARA_BP(vm.hback_porch) |
+		     DCU_HSYN_PARA_PW(vm.hsync_len) |
+		     DCU_HSYN_PARA_FP(vm.hfront_porch));
 	regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
-		     DCU_VSYN_PARA_BP(vbp) |
-		     DCU_VSYN_PARA_PW(vsw) |
-		     DCU_VSYN_PARA_FP(vfp));
+		     DCU_VSYN_PARA_BP(vm.vback_porch) |
+		     DCU_VSYN_PARA_PW(vm.vsync_len) |
+		     DCU_VSYN_PARA_FP(vm.vfront_porch));
 	regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
-		     DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
-		     DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
+		     DCU_DISP_SIZE_DELTA_Y(vm.vactive) |
+		     DCU_DISP_SIZE_DELTA_X(vm.hactive));
 	regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
 	regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
 		     DCU_BGND_G(0) | DCU_BGND_B(0));
Signature · 6 lines
2.19.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Acked-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parameters

Quoted 9 lines · Stefan Agner

From: Satendra Singh Thakur <[email protected]>

Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length.

I think if lots of people want this (iirc yours not the only driver that wants front/back-porch) we should extend the computed crtc_* fields with this. Kinda silly we force people to go through v4l videomode in drm drivers. But then, this gets the job done, so maybe an idea for todo.rst?

On both patches:

Quoted 76 lines
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 32 ++++++++++------------
 1 file changed, 14 insertions(+), 18 deletions(-)
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +14 -18
index 05d1c9977395..18afc94e4dff 100644
@@ -17,6 +17,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <video/videomode.h>
 
 #include "fsl_dcu_drm_crtc.h"
 #include "fsl_dcu_drm_drv.h"
@@ -85,39 +86,34 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
 	struct drm_connector *con = &fsl_dev->connector.base;
 	struct drm_display_mode *mode = &crtc->state->mode;
-	unsigned int hbp, hfp, hsw, vbp, vfp, vsw, pol = 0;
+	unsigned int pol = 0;
+	struct videomode vm;
 
 	clk_set_rate(fsl_dev->pix_clk, mode->clock * 1000);
 
-	/* Configure timings: */
-	hbp = mode->htotal - mode->hsync_end;
-	hfp = mode->hsync_start - mode->hdisplay;
-	hsw = mode->hsync_end - mode->hsync_start;
-	vbp = mode->vtotal - mode->vsync_end;
-	vfp = mode->vsync_start - mode->vdisplay;
-	vsw = mode->vsync_end - mode->vsync_start;
+	drm_display_mode_to_videomode(mode, &vm);
 
 	/* INV_PXCK as default (most display sample data on rising edge) */
 	if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE))
 		pol |= DCU_SYN_POL_INV_PXCK;
 
-	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+	if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
 		pol |= DCU_SYN_POL_INV_HS_LOW;
 
-	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
 		pol |= DCU_SYN_POL_INV_VS_LOW;
 
 	regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
-		     DCU_HSYN_PARA_BP(hbp) |
-		     DCU_HSYN_PARA_PW(hsw) |
-		     DCU_HSYN_PARA_FP(hfp));
+		     DCU_HSYN_PARA_BP(vm.hback_porch) |
+		     DCU_HSYN_PARA_PW(vm.hsync_len) |
+		     DCU_HSYN_PARA_FP(vm.hfront_porch));
 	regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
-		     DCU_VSYN_PARA_BP(vbp) |
-		     DCU_VSYN_PARA_PW(vsw) |
-		     DCU_VSYN_PARA_FP(vfp));
+		     DCU_VSYN_PARA_BP(vm.vback_porch) |
+		     DCU_VSYN_PARA_PW(vm.vsync_len) |
+		     DCU_VSYN_PARA_FP(vm.vfront_porch));
 	regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
-		     DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
-		     DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
+		     DCU_DISP_SIZE_DELTA_Y(vm.vactive) |
+		     DCU_DISP_SIZE_DELTA_X(vm.hactive));
 	regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
 	regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
 		     DCU_BGND_G(0) | DCU_BGND_B(0));
Signature · 6 lines
2.19.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
author maintainer Applied
#3 lore raw

Re: [PATCH 2/2] drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parameters

Quoted 11 lines · Daniel Vetter
Quoted 9 lines · Stefan Agner

From: Satendra Singh Thakur <[email protected]>

Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length.

Quoted 4 lines

I think if lots of people want this (iirc yours not the only driver that wants front/back-porch) we should extend the computed crtc_* fields with this. Kinda silly we force people to go through v4l videomode in drm drivers. But then, this gets the job done, so maybe an idea for todo.rst?

Hm, I see, yeah seems rather straight forward to calculate this information in drm_mode_set_crtcinfo().

Quoted 4 lines

On both patches:

Thanks, applied both.

--
Stefan

Quoted 76 lines
Quoted 76 lines
---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 32 ++++++++++------------
 1 file changed, 14 insertions(+), 18 deletions(-)
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +14 -19
index 05d1c9977395..18afc94e4dff 100644
@@ -17,6 +17,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <video/videomode.h>
 
 #include "fsl_dcu_drm_crtc.h"
 #include "fsl_dcu_drm_drv.h"
@@ -85,39 +86,34 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
 	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
 	struct drm_connector *con = &fsl_dev->connector.base;
 	struct drm_display_mode *mode = &crtc->state->mode;
-	unsigned int hbp, hfp, hsw, vbp, vfp, vsw, pol = 0;
+	unsigned int pol = 0;
+	struct videomode vm;
 
 	clk_set_rate(fsl_dev->pix_clk, mode->clock * 1000);
 
-	/* Configure timings: */
-	hbp = mode->htotal - mode->hsync_end;
-	hfp = mode->hsync_start - mode->hdisplay;
-	hsw = mode->hsync_end - mode->hsync_start;
-	vbp = mode->vtotal - mode->vsync_end;
-	vfp = mode->vsync_start - mode->vdisplay;
-	vsw = mode->vsync_end - mode->vsync_start;
+	drm_display_mode_to_videomode(mode, &vm);
 
 	/* INV_PXCK as default (most display sample data on rising edge) */
 	if (!(con->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE))
 		pol |= DCU_SYN_POL_INV_PXCK;
 
-	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+	if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
 		pol |= DCU_SYN_POL_INV_HS_LOW;
 
-	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+	if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
 		pol |= DCU_SYN_POL_INV_VS_LOW;
 
 	regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
-		     DCU_HSYN_PARA_BP(hbp) |
-		     DCU_HSYN_PARA_PW(hsw) |
-		     DCU_HSYN_PARA_FP(hfp));
+		     DCU_HSYN_PARA_BP(vm.hback_porch) |
+		     DCU_HSYN_PARA_PW(vm.hsync_len) |
+		     DCU_HSYN_PARA_FP(vm.hfront_porch));
 	regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
-		     DCU_VSYN_PARA_BP(vbp) |
-		     DCU_VSYN_PARA_PW(vsw) |
-		     DCU_VSYN_PARA_FP(vfp));
+		     DCU_VSYN_PARA_BP(vm.vback_porch) |
+		     DCU_VSYN_PARA_PW(vm.vsync_len) |
+		     DCU_VSYN_PARA_FP(vm.vfront_porch));
 	regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
-		     DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
-		     DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
+		     DCU_DISP_SIZE_DELTA_Y(vm.vactive) |
+		     DCU_DISP_SIZE_DELTA_X(vm.hactive));
 	regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
 	regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
 		     DCU_BGND_G(0) | DCU_BGND_B(0));
--

2.19.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel