ASoC: add fault detect recovery property to DT bindings

The driver already has support for setting the FDRB bit in the CONFA register through platform data, but there was no property to set it in the device-tree bindings.

---
 Documentation/devicetree/bindings/sound/st,sta32x.txt | 3 +++
 sound/soc/codecs/sta32x.c                             | 2 ++
 2 files changed, 5 insertions(+)

index 255de3ae5b2f..ff4a685a4303 100644
@@ -39,6 +39,9 @@ Optional properties:
   -  st,thermal-warning-recover:
 	If present, thermal warning recovery is enabled.
 
+  - st,fault-detect-recovery:
+	If present, fault detect recovery is enabled.
+
   -  st,thermal-warning-adjustment:
 	If present, thermal warning adjustment is enabled.
 

index d5035f2f2b2b..22de1593443c 100644
@@ -1038,6 +1038,8 @@ static int sta32x_probe_dt(struct device *dev, struct sta32x_priv *sta32x)
 	of_property_read_u8(np, "st,ch3-output-mapping",
 			    &pdata->ch3_output_mapping);
 
+	if (of_get_property(np, "st,fault-detect-recovery", NULL))
+		pdata->fault_detect_recovery = 1;
 	if (of_get_property(np, "st,thermal-warning-recovery", NULL))
 		pdata->thermal_warning_recovery = 1;
 	if (of_get_property(np, "st,thermal-warning-adjustment", NULL))

2.17.1

The patch

ASoC: add fault detect recovery property to DT bindings

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From: Daniel Mack <[email protected]>
Date: Wed, 3 Oct 2018 21:32:34 +0200
Subject: [PATCH] ASoC: add fault detect recovery property to DT bindings

The driver already has support for setting the FDRB bit in the CONFA register through platform data, but there was no property to set it in the device-tree bindings.

---
 Documentation/devicetree/bindings/sound/st,sta32x.txt | 3 +++
 sound/soc/codecs/sta32x.c                             | 2 ++
 2 files changed, 5 insertions(+)

index 255de3ae5b2f..ff4a685a4303 100644
@@ -39,6 +39,9 @@ Optional properties:
   -  st,thermal-warning-recover:
 	If present, thermal warning recovery is enabled.
 
+  - st,fault-detect-recovery:
+	If present, fault detect recovery is enabled.
+
   -  st,thermal-warning-adjustment:
 	If present, thermal warning adjustment is enabled.
 

index d5035f2f2b2b..22de1593443c 100644
@@ -1038,6 +1038,8 @@ static int sta32x_probe_dt(struct device *dev, struct sta32x_priv *sta32x)
 	of_property_read_u8(np, "st,ch3-output-mapping",
 			    &pdata->ch3_output_mapping);
 
+	if (of_get_property(np, "st,fault-detect-recovery", NULL))
+		pdata->fault_detect_recovery = 1;
 	if (of_get_property(np, "st,thermal-warning-recovery", NULL))
 		pdata->thermal_warning_recovery = 1;
 	if (of_get_property(np, "st,thermal-warning-adjustment", NULL))

2.19.0.rc2