Skip to contentSkip to conversation

OF: Handle CMDLINE when /chosen node is not present

PATCH Superseded Nick Kossifidis 2 participants 4 messages Oct 4, 2018

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 OF: Handle CMDLINE when /chosen node is not present

The /chosen node is optional so we should handle CMDLINE regardless the presence of /chosen/bootargs. Move handling of CMDLINE in early_init_dt_scan() instead.

---
 drivers/of/fdt.c | 69 +++++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 48 insertions(+), 21 deletions(-)
drivers/of/fdt.c +48 -21
index 800ad252c..868464b0b 100644
@@ -31,6 +31,14 @@
 
 #include "of_private.h"
 
+#ifdef CONFIG_CMDLINE
+#ifdef CONFIG_CMDLINE_FORCE
+static const char fixed_cmdline[] __initconst = CONFIG_CMDLINE;
+#else
+static char builtin_cmdline[] __initdata = CONFIG_CMDLINE;
+#endif
+#endif
+
 /*
  * of_fdt_limit_memory - limit the number of regions in the /memory node
  * @limit: maximum entries
@@ -1088,28 +1096,10 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 
 	/* Retrieve command line */
 	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
+	if (p != NULL && l > 0) {
 		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-
-	/*
-	 * CONFIG_CMDLINE is meant to be a default in case nothing else
-	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
-	 * is set in which case we override whatever was found earlier.
-	 */
-#ifdef CONFIG_CMDLINE
-#if defined(CONFIG_CMDLINE_EXTEND)
-	strlcat(data, " ", COMMAND_LINE_SIZE);
-	strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
-	strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#else
-	/* No arguments from boot loader, use kernel's  cmdl*/
-	if (!((char *)data)[0])
-		strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif /* CONFIG_CMDLINE */
-
-	pr_debug("Command line is: %s\n", (char*)data);
+		pr_debug("Got bootargs: %s\n", (char *) data);
+	}
 
 	/* break now */
 	return 1;
@@ -1240,6 +1230,43 @@ bool __init early_init_dt_scan(void *params)
 		return false;
 
 	early_init_dt_scan_nodes();
+
+	/*
+	 * The /chosen node normaly contains the bootargs element
+	 * that includes the kernel's command line parameters.
+	 * However the presence of /chosen is not mandatory so
+	 * in case we didn't get a command line when scanning
+	 * nodes above, we should provide one here before we
+	 * return, if possible.
+	 *
+	 * The built-in command line can be used as a default
+	 * command line in case we received nothing from the
+	 * device tree/bootloader. It can also be used for
+	 * extending or replacing the received command line.
+	 */
+#ifdef CONFIG_CMDLINE
+#if defined(CONFIG_CMDLINE_EXTEND)
+	/*
+	 * Order of parameters shouldn't matter for most cases,
+	 * so prepending or appending the built-in command line
+	 * shouldn't make a difference. In cases where it does
+	 * it's up to the user to configure the kernel and/or
+	 * the bootloader properly.
+	 */
+	if (builtin_cmdline[0]) {
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+	}
+#elif defined(CONFIG_CMDLINE_FORCE)
+	if (fixed_cmdline[0])
+		strlcpy(boot_command_line, fixed_cmdline, COMMAND_LINE_SIZE);
+#else
+	/* No arguments from boot loader, use kernel's cmdline */
+	if (!boot_command_line[0] && builtin_cmdline[0])
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#endif
+#endif /* CONFIG_CMDLINE */
+
 	return true;
 }
 
Signature · 1 line
2.16.4
#1 lore raw
Quoted 62 lines · Nick Kossifidis

The /chosen node is optional so we should handle CMDLINE regardless the presence of /chosen/bootargs. Move handling of CMDLINE in early_init_dt_scan() instead.

---
  drivers/of/fdt.c | 69 +++++++++++++++++++++++++++++++++++++++-----------------
  1 file changed, 48 insertions(+), 21 deletions(-)
drivers/of/fdt.c +11 -21
index 800ad252c..868464b0b 100644
@@ -31,6 +31,14 @@
 
  #include "of_private.h"
 
+#ifdef CONFIG_CMDLINE
+#ifdef CONFIG_CMDLINE_FORCE
+static const char fixed_cmdline[] __initconst = CONFIG_CMDLINE;
+#else
+static char builtin_cmdline[] __initdata = CONFIG_CMDLINE;
+#endif
+#endif
+
  /*
   * of_fdt_limit_memory - limit the number of regions in the /memory node
   * @limit: maximum entries
@@ -1088,28 +1096,10 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 
  	/* Retrieve command line */
  	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
+	if (p != NULL && l > 0) {
  		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-
-	/*
-	 * CONFIG_CMDLINE is meant to be a default in case nothing else
-	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
-	 * is set in which case we override whatever was found earlier.
-	 */
-#ifdef CONFIG_CMDLINE
-#if defined(CONFIG_CMDLINE_EXTEND)
-	strlcat(data, " ", COMMAND_LINE_SIZE);
-	strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
-	strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#else
-	/* No arguments from boot loader, use kernel's  cmdl*/
-	if (!((char *)data)[0])
-		strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif /* CONFIG_CMDLINE */
-
-	pr_debug("Command line is: %s\n", (char*)data);
+		pr_debug("Got bootargs: %s\n", (char *) data);
+	}
 
  	/* break now */
  	return 1;

drivers/of/fdt.c bool __init early_init_dt_scan(void *params) · line 1235

Quoted 6 lines
drivers/of/fdt.c +3 -0
@@ -1240,6 +1230,43 @@ bool __init early_init_dt_scan(void *params)
  		return false;
 
  	early_init_dt_scan_nodes();
+
+	/*
+	 * The /chosen node normaly contains the bootargs element

/s/normaly/normally

Quoted 24 lines
drivers/of/fdt.c +24 -0
+	 * that includes the kernel's command line parameters.
+	 * However the presence of /chosen is not mandatory so
+	 * in case we didn't get a command line when scanning
+	 * nodes above, we should provide one here before we
+	 * return, if possible.
+	 *
+	 * The built-in command line can be used as a default
+	 * command line in case we received nothing from the
+	 * device tree/bootloader. It can also be used for
+	 * extending or replacing the received command line.
+	 */
+#ifdef CONFIG_CMDLINE
+#if defined(CONFIG_CMDLINE_EXTEND)
+	/*
+	 * Order of parameters shouldn't matter for most cases,
+	 * so prepending or appending the built-in command line
+	 * shouldn't make a difference. In cases where it does
+	 * it's up to the user to configure the kernel and/or
+	 * the bootloader properly.
+	 */
+	if (builtin_cmdline[0]) {
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE)
+	}

drivers/of/fdt.c bool __init early_init_dt_scan(void *params) · line 1269

Quoted 10 lines
drivers/of/fdt.c +10 -0
+#elif defined(CONFIG_CMDLINE_FORCE)
+	if (fixed_cmdline[0])
+		strlcpy(boot_command_line, fixed_cmdline, COMMAND_LINE_SIZE);
+#else
+	/* No arguments from boot loader, use kernel's cmdline */
+	if (!boot_command_line[0] && builtin_cmdline[0])
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#endif
+#endif /* CONFIG_CMDLINE */
+

Any specific reason for doing this in early_init_dt_scan instead of early_init_dt_scan_chosen? I think keeping all boot command line modifications at one place makes more sense.

Regards,
Atish

Quoted 4 lines
drivers/of/fdt.c +0 -0
  	return true;
  }
 
#2 lore raw

Στις 2018-10-04 21:54, Atish Patra έγραψε:

Quoted 61 lines · Nick Kossifidis
Quoted 60 lines

The /chosen node is optional so we should handle CMDLINE regardless the presence of /chosen/bootargs. Move handling of CMDLINE in early_init_dt_scan() instead.

---
  drivers/of/fdt.c | 69 
+++++++++++++++++++++++++++++++++++++++-----------------
  1 file changed, 48 insertions(+), 21 deletions(-)
drivers/of/fdt.c +7 -0
index 800ad252c..868464b0b 100644
@@ -31,6 +31,14 @@
    #include "of_private.h"
  +#ifdef CONFIG_CMDLINE
+#ifdef CONFIG_CMDLINE_FORCE
+static const char fixed_cmdline[] __initconst = CONFIG_CMDLINE;
+#else
+static char builtin_cmdline[] __initdata = CONFIG_CMDLINE;
+#endif
+#endif
+
  /*
   * of_fdt_limit_memory - limit the number of regions in the /memory 

node
* @limit: maximum entries

drivers/of/fdt.c +3 -21
@@ -1088,28 +1096,10 @@ int __init early_init_dt_scan_chosen(unsigned 
 long node, const char *uname,
    	/* Retrieve command line */
  	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
+	if (p != NULL && l > 0) {
  		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-
-	/*
-	 * CONFIG_CMDLINE is meant to be a default in case nothing else
-	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
-	 * is set in which case we override whatever was found earlier.
-	 */
-#ifdef CONFIG_CMDLINE
-#if defined(CONFIG_CMDLINE_EXTEND)
-	strlcat(data, " ", COMMAND_LINE_SIZE);
-	strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
-	strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#else
-	/* No arguments from boot loader, use kernel's  cmdl*/
-	if (!((char *)data)[0])
-		strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif /* CONFIG_CMDLINE */
-
-	pr_debug("Command line is: %s\n", (char*)data);
+		pr_debug("Got bootargs: %s\n", (char *) data);
+	}
    	/* break now */
  	return 1;
Quoted 9 lines

drivers/of/fdt.c bool __init early_init_dt_scan(void *params) · line 1234

Quoted 6 lines
drivers/of/fdt.c +3 -0
@@ -1240,6 +1230,43 @@ bool __init early_init_dt_scan(void *params)
  		return false;
    	early_init_dt_scan_nodes();
+
+	/*
+	 * The /chosen node normaly contains the bootargs element

/s/normaly/normally

ACK

Quoted 40 lines
Quoted 24 lines
drivers/of/fdt.c +24 -0
+	 * that includes the kernel's command line parameters.
+	 * However the presence of /chosen is not mandatory so
+	 * in case we didn't get a command line when scanning
+	 * nodes above, we should provide one here before we
+	 * return, if possible.
+	 *
+	 * The built-in command line can be used as a default
+	 * command line in case we received nothing from the
+	 * device tree/bootloader. It can also be used for
+	 * extending or replacing the received command line.
+	 */
+#ifdef CONFIG_CMDLINE
+#if defined(CONFIG_CMDLINE_EXTEND)
+	/*
+	 * Order of parameters shouldn't matter for most cases,
+	 * so prepending or appending the built-in command line
+	 * shouldn't make a difference. In cases where it does
+	 * it's up to the user to configure the kernel and/or
+	 * the bootloader properly.
+	 */
+	if (builtin_cmdline[0]) {
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE)
+	}

drivers/of/fdt.c bool __init early_init_dt_scan(void *params) · line 1269

Quoted 10 lines
drivers/of/fdt.c +10 -0
+#elif defined(CONFIG_CMDLINE_FORCE)
+	if (fixed_cmdline[0])
+		strlcpy(boot_command_line, fixed_cmdline, COMMAND_LINE_SIZE);
+#else
+	/* No arguments from boot loader, use kernel's cmdline */
+	if (!boot_command_line[0] && builtin_cmdline[0])
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#endif
+#endif /* CONFIG_CMDLINE */
+

Any specific reason for doing this in early_init_dt_scan instead of early_init_dt_scan_chosen?
I think keeping all boot command line modifications at one place makes more sense.

Quoted 2 lines

Regards,
Atish

When parsing the device tree through early_init_dt_scan, after verifying the fdt file's integrity, the code will start traversing through the various nodes of the tree using of_scan_flat_dt (on the same file I patched). That function gets a pointer to a search function as its first argument and the second argument is an auxiliary buffer. The search function will run for all nodes on the tree until it reaches the expected node in which case it returns 1 and the search will end.

If we do the tweaking of the command line inside early_init_dt_scan_chosen before the check is done, we'll mess up the command line badly since we'll be tweaking it for every node on the tree (until we reach the /chosen node, if we reach it). If we do it after the check -which is what's happening now- we might not reach the code since the /chosen node is optional so the check may never succeed. So we need to do the check after the search finishes. I chose to do it on early_init_dt_scan since it's something that IMHO should be checked before that function returns.

Regards,
Nick

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#3 lore raw
Quoted 129 lines · Nick Kossifidis

Στις 2018-10-04 21:54, Atish Patra έγραψε:

Quoted 61 lines · Nick Kossifidis
Quoted 60 lines

The /chosen node is optional so we should handle CMDLINE regardless the presence of /chosen/bootargs. Move handling of CMDLINE in early_init_dt_scan() instead.

---
   drivers/of/fdt.c | 69
+++++++++++++++++++++++++++++++++++++++-----------------
   1 file changed, 48 insertions(+), 21 deletions(-)
drivers/of/fdt.c +7 -0
index 800ad252c..868464b0b 100644
@@ -31,6 +31,14 @@
     #include "of_private.h"
   +#ifdef CONFIG_CMDLINE
+#ifdef CONFIG_CMDLINE_FORCE
+static const char fixed_cmdline[] __initconst = CONFIG_CMDLINE;
+#else
+static char builtin_cmdline[] __initdata = CONFIG_CMDLINE;
+#endif
+#endif
+
   /*
    * of_fdt_limit_memory - limit the number of regions in the /memory

node
* @limit: maximum entries

drivers/of/fdt.c +3 -21
@@ -1088,28 +1096,10 @@ int __init early_init_dt_scan_chosen(unsigned
 long node, const char *uname,
     	/* Retrieve command line */
   	p = of_get_flat_dt_prop(node, "bootargs", &l);
-	if (p != NULL && l > 0)
+	if (p != NULL && l > 0) {
   		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-
-	/*
-	 * CONFIG_CMDLINE is meant to be a default in case nothing else
-	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
-	 * is set in which case we override whatever was found earlier.
-	 */
-#ifdef CONFIG_CMDLINE
-#if defined(CONFIG_CMDLINE_EXTEND)
-	strlcat(data, " ", COMMAND_LINE_SIZE);
-	strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
-	strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#else
-	/* No arguments from boot loader, use kernel's  cmdl*/
-	if (!((char *)data)[0])
-		strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif /* CONFIG_CMDLINE */
-
-	pr_debug("Command line is: %s\n", (char*)data);
+		pr_debug("Got bootargs: %s\n", (char *) data);
+	}
     	/* break now */
   	return 1;
Quoted 9 lines

drivers/of/fdt.c bool __init early_init_dt_scan(void *params) · line 1234

Quoted 6 lines
drivers/of/fdt.c +3 -0
@@ -1240,6 +1230,43 @@ bool __init early_init_dt_scan(void *params)
   		return false;
     	early_init_dt_scan_nodes();
+
+	/*
+	 * The /chosen node normaly contains the bootargs element

/s/normaly/normally

ACK

Quoted 40 lines
Quoted 24 lines
drivers/of/fdt.c +24 -0
+	 * that includes the kernel's command line parameters.
+	 * However the presence of /chosen is not mandatory so
+	 * in case we didn't get a command line when scanning
+	 * nodes above, we should provide one here before we
+	 * return, if possible.
+	 *
+	 * The built-in command line can be used as a default
+	 * command line in case we received nothing from the
+	 * device tree/bootloader. It can also be used for
+	 * extending or replacing the received command line.
+	 */
+#ifdef CONFIG_CMDLINE
+#if defined(CONFIG_CMDLINE_EXTEND)
+	/*
+	 * Order of parameters shouldn't matter for most cases,
+	 * so prepending or appending the built-in command line
+	 * shouldn't make a difference. In cases where it does
+	 * it's up to the user to configure the kernel and/or
+	 * the bootloader properly.
+	 */
+	if (builtin_cmdline[0]) {
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE)
+	}

drivers/of/fdt.c bool __init early_init_dt_scan(void *params) · line 1269

Quoted 10 lines
drivers/of/fdt.c +10 -0
+#elif defined(CONFIG_CMDLINE_FORCE)
+	if (fixed_cmdline[0])
+		strlcpy(boot_command_line, fixed_cmdline, COMMAND_LINE_SIZE);
+#else
+	/* No arguments from boot loader, use kernel's cmdline */
+	if (!boot_command_line[0] && builtin_cmdline[0])
+		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#endif
+#endif /* CONFIG_CMDLINE */
+

Any specific reason for doing this in early_init_dt_scan instead of early_init_dt_scan_chosen?
I think keeping all boot command line modifications at one place makes more sense.

Quoted 2 lines

Regards,
Atish

When parsing the device tree through early_init_dt_scan, after verifying the fdt file's
integrity, the code will start traversing through the various nodes of the tree using
of_scan_flat_dt (on the same file I patched). That function gets a pointer to a search
function as its first argument and the second argument is an auxiliary buffer. The
search function will run for all nodes on the tree until it reaches the expected node
in which case it returns 1 and the search will end.

Quoted 14 lines

If we do the tweaking of the command line inside early_init_dt_scan_chosen before the
check is done, we'll mess up the command line badly since we'll be tweaking it
for every node on the tree (until we reach the /chosen node, if we reach it). If we do
it after the check -which is what's happening now- we might not reach the code since
the /chosen node is optional so the check may never succeed. So we need to do the check
after the search finishes. I chose to do it on early_init_dt_scan since it's something
that IMHO should be checked before that function returns.

It makes sense. Thanks.

Regards,
Atish

Quoted 3 lines

Regards,
Nick

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv