media: af9035: prevent buffer overflow on write

From: Jozef Balga <[email protected]>

[ Upstream commit 312f73b648626a0526a3aceebb0a3192aaba05ce ]

When less than 3 bytes are written to the device, memcpy is called with negative array size which leads to buffer overflow and kernel panic. This patch adds a condition and returns -EOPNOTSUPP instead.
Fixes bugzilla issue 64871

[[email protected]: fix a merge conflict and changed the
condition to match the patch's comment, e. g. len == 3 could also be valid]

---
 drivers/media/usb/dvb-usb-v2/af9035.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

index 6e02a15d39ce..abddb621d9e6 100644
@@ -389,8 +389,10 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap,
 			    msg[0].addr == (state->af9033_i2c_addr[1] >> 1))
 				reg |= 0x100000;
 
-			ret = af9035_wr_regs(d, reg, &msg[0].buf[3],
-					msg[0].len - 3);
+			ret = (msg[0].len >= 3) ? af9035_wr_regs(d, reg,
+							         &msg[0].buf[3],
+							         msg[0].len - 3)
+					        : -EOPNOTSUPP;
 		} else {
 			/* I2C write */
 			u8 buf[MAX_XFER_SIZE];

2.17.1

From: Keerthy <[email protected]>

[ Upstream commit 3b7d96a0dbb6b630878597a1838fc39f808b761b ]

The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs.

---
 drivers/clocksource/timer-ti-32k.c | 3 +++
 1 file changed, 3 insertions(+)

index 8518d9dfba5c..73c990867c01 100644
@@ -98,6 +98,9 @@ static void __init ti_32k_timer_init(struct device_node *np)
 		return;
 	}
 
+	if (!of_machine_is_compatible("ti,am43"))
+		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+
 	ti_32k_timer.counter = ti_32k_timer.base;
 
 	/*

2.17.1

From: Cong Wang <[email protected]>

[ Upstream commit 5fe23f262e0548ca7f19fb79f89059a60d087d22 ]

There is a race condition between ucma_close() and ucma_resolve_ip():

CPU0 CPU1
ucma_resolve_ip(): ucma_close():

ctx = ucma_get_ctx(file, cmd.id);

        list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) {
                mutex_lock(&mut);
                idr_remove(&ctx_idr, ctx->id);
                mutex_unlock(&mut);
		...
                mutex_lock(&mut);
                if (!ctx->closing) {
                        mutex_unlock(&mut);
                        rdma_destroy_id(ctx->cm_id);
		...
                ucma_free_ctx(ctx);

ret = rdma_resolve_addr();
ucma_put_ctx(ctx);

Before idr_remove(), ucma_get_ctx() could still find the ctx and after rdma_destroy_id(), rdma_resolve_addr() may still access id_priv pointer. Also, ucma_put_ctx() may use ctx after ucma_free_ctx() too.

ucma_close() should call ucma_put_ctx() too which tests the refcnt and waits for the last one releasing it. The similar pattern is already used by ucma_destroy_id().

---
 drivers/infiniband/core/ucma.c | 2 ++
 1 file changed, 2 insertions(+)

index 55aa8d3d752f..cc78fb6e371d 100644
@@ -1703,6 +1703,8 @@ static int ucma_close(struct inode *inode, struct file *filp)
 		mutex_lock(&mut);
 		if (!ctx->closing) {
 			mutex_unlock(&mut);
+			ucma_put_ctx(ctx);
+			wait_for_completion(&ctx->comp);
 			/* rdma_destroy_id ensures that no event handlers are
 			 * inflight for that id before releasing it.
 			 */

2.17.1

From: Andreas Schwab <[email protected]>

[ Upstream commit 9e62df51be993035c577371ffee5477697a56aad ]

Fix errors in Atari keymap (mostly in keypad, help and undo keys).

Patch provided on debian-68k ML by Andreas Schwab <[email protected]>, keymap array size and unhandled scancode limit adjusted to 0x73 by me.

---
 drivers/input/keyboard/atakbd.c | 64 ++++++++++++++-------------------
 1 file changed, 26 insertions(+), 38 deletions(-)

index f1235831283d..524a72bee55a 100644
@@ -79,8 +79,7 @@ MODULE_LICENSE("GPL");
  */
 
 
-static unsigned char atakbd_keycode[0x72] = {	/* American layout */
-	[0]	 = KEY_GRAVE,
+static unsigned char atakbd_keycode[0x73] = {	/* American layout */
 	[1]	 = KEY_ESC,
 	[2]	 = KEY_1,
 	[3]	 = KEY_2,

@@ -121,9 +120,9 @@ static unsigned char atakbd_keycode[0x72] = {	/* American layout */
 	[38]	 = KEY_L,
 	[39]	 = KEY_SEMICOLON,
 	[40]	 = KEY_APOSTROPHE,
-	[41]	 = KEY_BACKSLASH,	/* FIXME, '#' */
+	[41]	 = KEY_GRAVE,
 	[42]	 = KEY_LEFTSHIFT,
-	[43]	 = KEY_GRAVE,		/* FIXME: '~' */
+	[43]	 = KEY_BACKSLASH,
 	[44]	 = KEY_Z,
 	[45]	 = KEY_X,
 	[46]	 = KEY_C,

@@ -149,45 +148,34 @@ static unsigned char atakbd_keycode[0x72] = {	/* American layout */
 	[66]	 = KEY_F8,
 	[67]	 = KEY_F9,
 	[68]	 = KEY_F10,
-	[69]	 = KEY_ESC,
-	[70]	 = KEY_DELETE,
-	[71]	 = KEY_KP7,
-	[72]	 = KEY_KP8,
-	[73]	 = KEY_KP9,
+	[71]	 = KEY_HOME,
+	[72]	 = KEY_UP,
 	[74]	 = KEY_KPMINUS,
-	[75]	 = KEY_KP4,
-	[76]	 = KEY_KP5,
-	[77]	 = KEY_KP6,
+	[75]	 = KEY_LEFT,
+	[77]	 = KEY_RIGHT,
 	[78]	 = KEY_KPPLUS,
-	[79]	 = KEY_KP1,
-	[80]	 = KEY_KP2,
-	[81]	 = KEY_KP3,
-	[82]	 = KEY_KP0,
-	[83]	 = KEY_KPDOT,
-	[90]	 = KEY_KPLEFTPAREN,
-	[91]	 = KEY_KPRIGHTPAREN,
-	[92]	 = KEY_KPASTERISK,	/* FIXME */
-	[93]	 = KEY_KPASTERISK,
-	[94]	 = KEY_KPPLUS,
-	[95]	 = KEY_HELP,
+	[80]	 = KEY_DOWN,
+	[82]	 = KEY_INSERT,
+	[83]	 = KEY_DELETE,
 	[96]	 = KEY_102ND,
-	[97]	 = KEY_KPASTERISK,	/* FIXME */
-	[98]	 = KEY_KPSLASH,
+	[97]	 = KEY_UNDO,
+	[98]	 = KEY_HELP,
 	[99]	 = KEY_KPLEFTPAREN,
 	[100]	 = KEY_KPRIGHTPAREN,
 	[101]	 = KEY_KPSLASH,
 	[102]	 = KEY_KPASTERISK,
-	[103]	 = KEY_UP,
-	[104]	 = KEY_KPASTERISK,	/* FIXME */
-	[105]	 = KEY_LEFT,
-	[106]	 = KEY_RIGHT,
-	[107]	 = KEY_KPASTERISK,	/* FIXME */
-	[108]	 = KEY_DOWN,
-	[109]	 = KEY_KPASTERISK,	/* FIXME */
-	[110]	 = KEY_KPASTERISK,	/* FIXME */
-	[111]	 = KEY_KPASTERISK,	/* FIXME */
-	[112]	 = KEY_KPASTERISK,	/* FIXME */
-	[113]	 = KEY_KPASTERISK	/* FIXME */
+	[103]	 = KEY_KP7,
+	[104]	 = KEY_KP8,
+	[105]	 = KEY_KP9,
+	[106]	 = KEY_KP4,
+	[107]	 = KEY_KP5,
+	[108]	 = KEY_KP6,
+	[109]	 = KEY_KP1,
+	[110]	 = KEY_KP2,
+	[111]	 = KEY_KP3,
+	[112]	 = KEY_KP0,
+	[113]	 = KEY_KPDOT,
+	[114]	 = KEY_KPENTER,
 };
 
 static struct input_dev *atakbd_dev;

@@ -195,7 +183,7 @@ static struct input_dev *atakbd_dev;
 static void atakbd_interrupt(unsigned char scancode, char down)
 {
 
-	if (scancode < 0x72) {		/* scancodes < 0xf2 are keys */
+	if (scancode < 0x73) {		/* scancodes < 0xf3 are keys */
 
 		// report raw events here?
 

@@ -209,7 +197,7 @@ static void atakbd_interrupt(unsigned char scancode, char down)
 			input_report_key(atakbd_dev, scancode, down);
 			input_sync(atakbd_dev);
 		}
-	} else				/* scancodes >= 0xf2 are mouse data, most likely */
+	} else				/* scancodes >= 0xf3 are mouse data, most likely */
 		printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode);
 
 	return;

2.17.1

From: Michael Schmitz <[email protected]>

[ Upstream commit 52d2c7bf7c90217fbe875d2d76f310979c48eb83 ]

The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes.

Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key.

---
 drivers/input/keyboard/atakbd.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

index 524a72bee55a..fdeda0b0fbd6 100644
@@ -189,14 +189,8 @@ static void atakbd_interrupt(unsigned char scancode, char down)
 
 		scancode = atakbd_keycode[scancode];
 
-		if (scancode == KEY_CAPSLOCK) {	/* CapsLock is a toggle switch key on Amiga */
-			input_report_key(atakbd_dev, scancode, 1);
-			input_report_key(atakbd_dev, scancode, 0);
-			input_sync(atakbd_dev);
-		} else {
-			input_report_key(atakbd_dev, scancode, down);
-			input_sync(atakbd_dev);
-		}
+		input_report_key(atakbd_dev, scancode, down);
+		input_sync(atakbd_dev);
 	} else				/* scancodes >= 0xf3 are mouse data, most likely */
 		printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode);
 

2.17.1

From: Nathan Chancellor <[email protected]>

[ Upstream commit 8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 ]

Clang warns that the address of a pointer will always evaluated as true in a boolean context:

drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion]

        if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
            ~~~~~^~~~~~~~~~~~~

1 warning generated.

Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning.

---
 drivers/net/ethernet/mellanox/mlx4/eq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index ff77b8b608bd..7417605c3cf6 100644
@@ -228,7 +228,8 @@ static void mlx4_set_eq_affinity_hint(struct mlx4_priv *priv, int vec)
 	struct mlx4_dev *dev = &priv->dev;
 	struct mlx4_eq *eq = &priv->eq_table.eq[vec];
 
-	if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
+	if (!cpumask_available(eq->affinity_mask) ||
+	    cpumask_empty(eq->affinity_mask))
 		return;
 
 	hint_err = irq_set_affinity_hint(eq->irq, eq->affinity_mask);

2.17.1

From: James Cowgill <[email protected]>

[ Upstream commit 57a489786de9ec37d6e25ef1305dc337047f0236 ]

Building a riscv kernel with CONFIG_FUNCTION_TRACER and CONFIG_MODVERSIONS enabled results in these two warnings:

MODPOST vmlinux.o
WARNING: EXPORT symbol "return_to_handler" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.

When exporting symbols from an assembly file, the MODVERSIONS code requires their prototypes to be defined in asm-prototypes.h (see scripts/Makefile.build). Since both of these symbols have prototypes defined in linux/ftrace.h, include this header from RISC-V's asm-prototypes.h.

---
 arch/riscv/include/asm/asm-prototypes.h | 7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 arch/riscv/include/asm/asm-prototypes.h

new file mode 100644
index 000000000000..c9fecd120d18
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_PROTOTYPES_H
+
+#include <linux/ftrace.h>
+#include <asm-generic/asm-prototypes.h>
+
+#endif /* _ASM_RISCV_PROTOTYPES_H */

2.17.1

From: Michael Neuling <[email protected]>

[ Upstream commit cf13435b730a502e814c63c84d93db131e563f5f ]

When we treclaim we store the userspace checkpointed r13 to a scratch SPR and then later save the scratch SPR to the user thread struct.

Unfortunately, this doesn't work as accessing the user thread struct can take an SLB fault and the SLB fault handler will write the same scratch SPRG that now contains the userspace r13.

To fix this, we store r13 to the kernel stack (which can't fault) before we access the user thread struct.

Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen as a random userspace segfault with r13 looking like a kernel address.

---
 arch/powerpc/kernel/tm.S | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

index b7019b559ddb..cf30c2c36502 100644
@@ -199,13 +199,20 @@ dont_backup_fp:
 	std	r1, PACATMSCRATCH(r13)
 	ld	r1, PACAR1(r13)
 
-	/* Store the PPR in r11 and reset to decent value */
 	std	r11, GPR11(r1)			/* Temporary stash */
 
+	/*
+	 * Store r13 away so we can free up the scratch SPR for the SLB fault
+	 * handler (needed once we start accessing the thread_struct).
+	 */
+	GET_SCRATCH0(r11)
+	std	r11, GPR13(r1)
+
 	/* Reset MSR RI so we can take SLB faults again */
 	li	r11, MSR_RI
 	mtmsrd	r11, 1
 
+	/* Store the PPR in r11 and reset to decent value */
 	mfspr	r11, SPRN_PPR
 	HMT_MEDIUM
 

@@ -234,7 +241,7 @@ dont_backup_fp:
 	ld	r4, GPR7(r1)			/* user r7 */
 	ld	r5, GPR11(r1)			/* user r11 */
 	ld	r6, GPR12(r1)			/* user r12 */
-	GET_SCRATCH0(8)				/* user r13 */
+	ld	r8, GPR13(r1)			/* user r13 */
 	std	r3, GPR1(r7)
 	std	r4, GPR7(r7)
 	std	r5, GPR11(r7)

2.17.1

From: Michael Neuling <[email protected]>

[ Upstream commit 96dc89d526ef77604376f06220e3d2931a0bfd58 ]

Current we store the userspace r1 to PACATMSCRATCH before finally saving it to the thread struct.

In theory an exception could be taken here (like a machine check or SLB miss) that could write PACATMSCRATCH and hence corrupt the userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but others do.

We've never actually seen this happen but it's theoretically possible. Either way, the code is fragile as it is.

This patch saves r1 to the kernel stack (which can't fault) before we turn MSR[RI] back on. PACATMSCRATCH is still used but only with MSR[RI] off. We then copy r1 from the kernel stack to the thread struct once we have MSR[RI] back on.

---
 arch/powerpc/kernel/tm.S | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

index cf30c2c36502..2d2860711e07 100644
@@ -201,6 +201,13 @@ dont_backup_fp:
 
 	std	r11, GPR11(r1)			/* Temporary stash */
 
+	/*
+	 * Move the saved user r1 to the kernel stack in case PACATMSCRATCH is
+	 * clobbered by an exception once we turn on MSR_RI below.
+	 */
+	ld	r11, PACATMSCRATCH(r13)
+	std	r11, GPR1(r1)
+
 	/*
 	 * Store r13 away so we can free up the scratch SPR for the SLB fault
 	 * handler (needed once we start accessing the thread_struct).

@@ -237,7 +244,7 @@ dont_backup_fp:
 	SAVE_GPR(8, r7)				/* user r8 */
 	SAVE_GPR(9, r7)				/* user r9 */
 	SAVE_GPR(10, r7)			/* user r10 */
-	ld	r3, PACATMSCRATCH(r13)		/* user r1 */
+	ld	r3, GPR1(r1)			/* user r1 */
 	ld	r4, GPR7(r1)			/* user r7 */
 	ld	r5, GPR11(r1)			/* user r11 */
 	ld	r6, GPR12(r1)			/* user r12 */

2.17.1