drm/msm/dsi: configure VCO rate for 10nm PLL driver
PATCH 1/1 drm/msm/dsi: configure VCO rate for 10nm PLL driver
Currenty the VCO rate in the 10nm PLL driver relies on the parent rate which is not configured.
Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.
Signed-off-by Abhinav Kumar <[email protected]>
--- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c +3 -1
@@ -39,6 +39,8 @@#define DSI_PIXEL_PLL_CLK 1#define NUM_PROVIDED_CLKS 2 +#define VCO_REF_CLK_RATE 19200000 +struct dsi_pll_regs {u32 pll_prop_gain_rate;u32 pll_lockdet_rate;
@@ -316,7 +318,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, parent_rate); pll_10nm->vco_current_rate = rate; - pll_10nm->vco_ref_clk_rate = parent_rate; + pll_10nm->vco_ref_clk_rate =VCO_REF_CLK_RATE ;dsi_pll_setup_config (pll_10nm);
Signature · 7 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 7 lines · Abhinav Kumar
Currenty the VCO rate in the 10nm PLL driver relies on the parent rate which is not configured.
Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.Signed-off-by Abhinav Kumar <[email protected]>
Sorry for missing this when it was posted. This is consistent with the other files in pll/, so
Reviewed-by Sean Paul <[email protected]>
I'll stuff this in dpu-staging/for-next.
Sean
Quoted 30 lines
--- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c +3
-1@@ -39,6 +39,8 @@#define DSI_PIXEL_PLL_CLK 1#define NUM_PROVIDED_CLKS 2 +#define VCO_REF_CLK_RATE 19200000 +struct dsi_pll_regs {u32 pll_prop_gain_rate;u32 pll_lockdet_rate;@@ -316,7 +318,7 @@ static int dsi_pll_10nm_vco_set_rate(struct clk_hw *hw, unsigned long rate, parent_rate); pll_10nm->vco_current_rate = rate; - pll_10nm->vco_ref_clk_rate = parent_rate; + pll_10nm->vco_ref_clk_rate =VCO_REF_CLK_RATE ;dsi_pll_setup_config (pll_10nm);Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Signature · 5 lines
Sean Paul, Software Engineer, Google / Chromium OS _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel