arm: mx5: Add LDB clock config code
Subsystems (3)
PATCH v2 1/1 arm: mx5: Add LDB clock config code
Add code to configure PLL4, from which the LDB clock are directly derived.
Signed-off-by Marek Vasut <[email protected]>
Cc Stefano Babic <[email protected]>
---
V2: Enable config_ldb_clk() for MX53 only by adding ifdef
--- arch/arm/include/asm/arch-mx5/clock.h | 1 + arch/arm/mach-imx/mx5/clock.c | 29 +++++++++++++++++++++++++++ 2 files changed, 30 insertions(+)
arch/arm/include/asm/arch-mx5/clock.h +1 -0
@@ -38,6 +38,7 @@ enum mxc_clock {MXC_NFC_CLK ,MXC_PERIPH_CLK ,MXC_I2C_CLK , + MXC_LDB_CLK, };u32 imx_get_uartclk (void );
arch/arm/mach-imx/mx5/clock.c +29 -0
@@ -838,6 +838,31 @@ static int config_ddr_clk(u32 emi_clk)return 0 ; } +#ifdef CONFIG_MX53 +static int config_ldb_clk (u32 ref,u32 freq) +{ +int ret =0 ; +struct pll_param pll_param; + +memset (&pll_param,0 ,sizeof (struct pll_param )); + + ret =calc_pll_params (ref, freq, &pll_param); +if (ret !=0 ) { +printf ("Error:Can't find pll parameters: %d\n" , + ret); +return ret; + } + +return config_pll_clk (PLL4_CLOCK , &pll_param); +} +#else +static int config_ldb_clk (u32 ref,u32 freq) +{ +/* Platform not supported */ +return -EINVAL ; +} +#endif +/* * This function assumes the expected core clock has to be changed by * modifying the PLL. This is NOT true always but for most of the times,
@@ -879,6 +904,10 @@ int mxc_set_clock(u32 ref, u32 freq, enum mxc_clock clk)if (config_nfc_clk (freq))return -EINVAL ;break ; +case MXC_LDB_CLK : +if (config_ldb_clk (ref, freq)) +return -EINVAL ; +break ;default :printf ("Warning:Unsupported or invalid clock type\n" ); }
Signature · 1 line
2.18.0