Skip to contentSkip to conversation

Input: elants_i2c - Use DMA safe i2c when possible

PATCH Superseded Stephen Boyd 1 participant 1 message Oct 10, 2018 Input drivers

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Input: elants_i2c - Use DMA safe i2c when possible

This irq handler is always reading bytes from the device into a kmalloced buffer, so it's safe to mark this transaction as DMA safe. This avoids bouncing the buffer when an i2c controller decides to use DMA for a transaction.

---

Changes from v1:
* Moved buf to end of structure to keep it cacheline aligned and DMA safe

 drivers/input/touchscreen/elants_i2c.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/input/touchscreen/elants_i2c.c +4 -3
index d21ca39b0fdb..f2cb23121833 100644
@@ -147,10 +147,11 @@ struct elants_data {
 	u8 cmd_resp[HEADER_SIZE];
 	struct completion cmd_done;
 
-	u8 buf[MAX_PACKET_SIZE];
-
 	bool wake_irq_enabled;
 	bool keep_power_in_suspend;
+
+	/* Must be last to be used for DMA operations */
+	u8 buf[MAX_PACKET_SIZE] ____cacheline_aligned;
 };
 
 static int elants_i2c_send(struct i2c_client *client,
@@ -863,7 +864,7 @@ static irqreturn_t elants_i2c_irq(int irq, void *_dev)
 	int i;
 	int len;
 
-	len = i2c_master_recv(client, ts->buf, sizeof(ts->buf));
+	len = i2c_master_recv_dmasafe(client, ts->buf, sizeof(ts->buf));
 	if (len < 0) {
 		dev_err(&client->dev, "%s: failed to read data: %d\n",
 			__func__, len);
Signature · 1 line
Sent by a computer through tubes