scsi: ceva: add ls1046a soc support
Subsystems (2)
PATCH 1/4 scsi: ceva: add ls1046a soc support
Add ahci compatible support for ls1046a soc.
--- drivers/ata/sata_ceva.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
drivers/ata/sata_ceva.c +3 -0
@@ -99,6 +99,7 @@ enum ceva_soc {CEVA_LS1012A ,CEVA_LS1021A ,CEVA_LS1043A , + CEVA_LS1046A, }; struct ceva_sata_priv {
@@ -138,6 +139,7 @@ static int ceva_init_sata(struct ceva_sata_priv *priv)case CEVA_LS1012A :case CEVA_LS1043A : +case CEVA_LS1046A :writel (ECC_DIS_ADDR_CH2 ,ECC_DIS_VAL_CH2 );writel (CEVA_PHY1_CFG , base +AHCI_VEND_PPCFG );writel (CEVA_TRANS_CFG , base +AHCI_VEND_PTC );
@@ -170,6 +172,7 @@ static const struct udevice_id sata_ceva_ids[] = { { .compatible = "fsl,ls1012a-ahci", .data = CEVA_LS1012A }, { .compatible = "fsl,ls1021a-ahci", .data = CEVA_LS1021A }, { .compatible = "fsl,ls1043a-ahci", .data = CEVA_LS1043A }, + { .compatible = "fsl,ls1046a-ahci", .data = CEVA_LS1046A }, { } };
Signature · 1 line
1.7.1
PATCH 2/4 armv8: dts: fsl-ls1046a: add sata node support
One ls1046a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization.
Add sata node to support this feature.
--- arch/arm/dts/fsl-ls1046a-qds.dtsi | 4 ++++ arch/arm/dts/fsl-ls1046a-rdb.dts | 4 ++++ arch/arm/dts/fsl-ls1046a.dtsi | 8 ++++++++ 3 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/dts/fsl-ls1046a-qds.dtsi +4 -0
@@ -76,3 +76,7 @@ &lpuart0 { status = "okay"; }; + +&sata { + status = "okay"; +};
arch/arm/dts/fsl-ls1046a-rdb.dts +4 -0
@@ -39,3 +39,7 @@ reg = <1>; }; }; + +&sata { + status = "okay"; +};
arch/arm/dts/fsl-ls1046a.dtsi +8 -0
@@ -291,5 +291,13 @@ ranges = <0x81000000 0x0 0x00000000 0x50 0x00020000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; + + sata: sata at 3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 69 4>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; }; };
Signature · 1 line
1.7.1
PATCH 3/4 arm64: ls1046ardb: enable DM support for sata
In reply to Peng MaEnable related configs to support sata DM feature.
--- configs/ls1046ardb_qspi_defconfig | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
configs/ls1046ardb_qspi_defconfig +5 -0
@@ -48,3 +48,8 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_BLK=y CONFIG_DM_MMC=y +CONFIG_DM_SCSI=y +CONFIG_SATA_CEVA=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_AHCI=y
Signature · 1 line
1.7.1
PATCH 4/4 arm64: ls1046aqds: enable DM support for sata
In reply to Peng MaEnable related configs to support sata DM feature.
--- configs/ls1046aqds_defconfig | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
configs/ls1046aqds_defconfig +5 -0
@@ -51,3 +51,8 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_STORAGE=y CONFIG_BLK=y CONFIG_DM_MMC=y +CONFIG_DM_SCSI=y +CONFIG_SATA_CEVA=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_AHCI=y
Signature · 1 line
1.7.1
PATCH 1/4 scsi: ceva: add ls1046a soc support
In reply to Peng MaQuoted 4 lines · Peng Ma
Add ahci compatible support for ls1046a soc.
Signed-off-by Peng Ma <[email protected]>---
Please remember to sort defconfig using moveconfig.py in the future. This set is applied to fsl-qoriq master, awaiting upstream. Thanks.
York
PATCH 1/4 scsi: ceva: add ls1046a soc support
Hi York,
got it, thanks.
Best Regards,
Peng
Quoted 21 lines
-----Original Message-----
From: York Sun
Sent: 2018年12月11日 5:10
To: Peng Ma <[email protected]>; u-boot at lists.denx.de
Cc: albert.u.boot at aribaud.net; Mingkai Hu <[email protected]>; sumit.garg at nxp.com; Pankaj Bansal <[email protected]>; Fabio Estevam <[email protected]>; Yinbo Zhu <[email protected]>; michal.simek at xilinx.com; sjg at chromium.org; Andy Tang <[email protected]>
Subject: Re: [PATCH 1/4] scsi: ceva: add ls1046a soc supportQuoted 4 lines · Peng Ma
Add ahci compatible support for ls1046a soc.
Signed-off-by Peng Ma <[email protected]>---
Please remember to sort defconfig using
moveconfig.pyin the future. This set is applied to fsl-qoriq master, awaiting upstream. Thanks.York