Skip to contentSkip to conversation

ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1

PATCH In review Patrice Chotard 2 participants 4 messages Oct 3, 2018 – Oct 11, 2018

Subsystems (2)
Arm (32-bit) Arm STM32
lore
Share & tools
lore

Patrice Chotard

author
#0 lore raw

PATCH 1/1 ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1

Add usbotg_hs regulator to allow to use the USB mass-storage feature on OTG usb port.

Signed-off-by Patrice Chotard <[email protected]>

---

 arch/arm/dts/stm32mp157c-ed1.dts | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/dts/stm32mp157c-ed1.dts +4 -0
index 898deaf41095..f8b770116711 100644
@@ -361,6 +361,10 @@
 	status = "okay";
 };
 
+&usbotg_hs {
+	usb33d-supply = <&usb33>;
+};
+
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 	vdda1v1-supply = <&reg11>;
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1

Quoted 14 lines · Patrice Chotard

Add usbotg_hs regulator to allow to use the USB mass-storage feature on OTG usb port.

Signed-off-by Patrice Chotard <[email protected]>

---

 arch/arm/dts/stm32mp157c-ed1.dts | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/dts/stm32mp157c-ed1.dts +0 -0
index 898deaf41095..f8b770116711 100644

arch/arm/dts/stm32mp157c-ed1.dts line 370

Quoted 10 lines
arch/arm/dts/stm32mp157c-ed1.dts +4 -0
@@ -361,6 +361,10 @@
 	status = "okay";
 };
 
+&usbotg_hs {
+	usb33d-supply = <&usb33>;
+};
+
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 	vdda1v1-supply = <&reg11>;

This is also being sent to Linux, right? Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181003/06b261e9/attachment.sig>
author
#2 lore raw

PATCH 1/1 ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1

Hi Tom

Quoted 19 lines · Tom Rini
Quoted 17 lines · Patrice Chotard

Add usbotg_hs regulator to allow to use the USB mass-storage feature on OTG usb port.

Signed-off-by Patrice Chotard <[email protected]>

---

 arch/arm/dts/stm32mp157c-ed1.dts | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/dts/stm32mp157c-ed1.dts +0 -0
index 898deaf41095..f8b770116711 100644
@@ -361,6 +361,10 @@
 	status = "okay";
 };
Quoted 9 lines

arch/arm/dts/stm32mp157c-ed1.dts line 370

Quoted 7 lines
arch/arm/dts/stm32mp157c-ed1.dts +4 -0
+&usbotg_hs {
+	usb33d-supply = <&usb33>;
+};
+
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 	vdda1v1-supply = <&reg11>;

This is also being sent to Linux, right? Thanks!

I'am not in charge of that, but yes it will be sent on Linux side.

Thanks

Patrice

Quoted 1 line
#3 lore raw
In reply to Patrice Chotard
Quoted 4 lines · Patrice Chotard

Add usbotg_hs regulator to allow to use the USB mass-storage feature on OTG usb port.

Signed-off-by Patrice Chotard <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181011/5dad2ad4/attachment.sig>