lte-api: protocol and authentication properties
PATCH 1/5 lte-api: protocol and authentication properties
added 4 properties for handling the type of context and the authentication method, exactly like in any gprs context handling. The properties are named after the equivalent gprs-context one, for compatibility and uniformity.
--- doc/lte-api.txt | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
doc/lte-api.txt +40 -0
@@ -33,3 +33,43 @@ Properties string DefaultAccessPointName [readwrite] Setting this property to an empty string clears the default APN from the modem. + + string Protocol [readwrite] + + Holds the protocol for this context. Valid values + are: "ip", "ipv6" and "dual". Default value is "ip". + + string AuthenticationMethod [readwrite] + + Sets the Method used for the authentication + for the default APN. + + Available values are "none", "pap" and "chap". + Default is "none". + + If the AuthenticationMethod is set to 'none' it remove + the authentication for the DefaultAPN. + In case of AuthenticationMethod 'none', + if the Username and Password properties are not empty, + the values are preserved in the properties, but they + are not used or transmitted to the module. + Conversely, if Username or Password are empty, the + authentication method selected internally is 'none', + but the property AuthenticationMethod is left unchanged. + + If the default APN supports authentication and it + fails, then it is up to the network how to proceed. + In general LTE access is denied and the modem can + fallback to a legacy technology if capable and another + radio technology is available. + + string Username [readwrite] + + Holds the username to be used for authentication + purposes. + + string Password [readwrite] + + Holds the password to be used for authentication + purposes. +
Signature · 1 line
2.17.1
PATCH 2/5 lte.h: added proto and authentication handling
The ofono_lte_default_attach_info is extended with protocol, authentication method, username and password.
The transmission of this info from the src to the atom happens through the existing set_default_attach_info.
A signal is emitted when one of these properties changes
--- include/lte.h | 5 +++++ 1 file changed, 5 insertions(+)
include/lte.h +5 -0
@@ -3,6 +3,7 @@* oFono - Open Source Telephony * * Copyright (C) 2016 Endocode AG. All rights reserved. +* Copyright (C) 2018 Gemalto M2M * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as
@@ -32,6 +33,10 @@ struct ofono_lte;struct ofono_lte_default_attach_info {char apn[OFONO_GPRS_MAX_APN_LENGTH +1 ]; +enum ofono_gprs_proto proto; +enum ofono_gprs_auth_method auth_method; +char username[OFONO_GPRS_MAX_USERNAME_LENGTH +1 ]; +char password[OFONO_GPRS_MAX_PASSWORD_LENGTH +1 ]; };typedef void (*ofono_lte_cb_t )(const struct ofono_error *error,void *data);
Signature · 1 line
2.17.1
Re: [PATCH 2/5] lte.h: added proto and authentication handling
Hi,
Pass --prefix="PATCH v2" and --cover-letter options to git-format-patch in order to differentiate your patch submissions from each other.
Quoted 1 line · Giacinto Cifelli
Co-authored-by Martin Baschin <[email protected]>
Tags go after description, and you've already got this down below anyway.
Quoted 17 lines
The
ofono_lte_default_attach_infois extended with protocol, authentication method, username and password.
The transmission of this info from the src to the atom happens through the existingset_default_attach_info.
A signal is emitted when one of these properties changesCo-authored-by Martin Baschin <[email protected]>--- include/lte.h | 5 +++++ 1 file changed, 5 insertions(+)include/lte.h +0
-0
include/lte.h line 6
Quoted 4 lines
include/lte.h +1
-0@@ -3,6 +3,7 @@* oFono - Open Source Telephony * * Copyright (C) 2016 Endocode AG. All rights reserved. +* Copyright (C) 2018 Gemalto M2M
I wouldn't add a copyright line for a trivial change like this...
Quoted 4 lines
include/lte.h +0
-0* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as
include/lte.h struct ofono_lte; · line 42
Quoted 10 lines
include/lte.h +4
-0@@ -32,6 +33,10 @@ struct ofono_lte;struct ofono_lte_default_attach_info {char apn[OFONO_GPRS_MAX_APN_LENGTH +1 ]; +enum ofono_gprs_proto proto; +enum ofono_gprs_auth_method auth_method; +char username[OFONO_GPRS_MAX_USERNAME_LENGTH +1 ]; +char password[OFONO_GPRS_MAX_PASSWORD_LENGTH +1 ]; };typedef void (*ofono_lte_cb_t )(const struct ofono_error *error,void *data);
/Jonas
Re: [PATCH 2/5] lte.h: added proto and authentication handling
Hi,
Quoted 5 lines · Jonas Bonn
Hi,
Pass --prefix="PATCH v2" and --cover-letter options to git-format-patch in order to differentiate your patch submissions from each other.
thanks. I will re-submit with all this.
Quoted 6 lines · Giacinto Cifelli
Quoted 1 line
Co-authored-by Martin Baschin <[email protected]>Tags go after description, and you've already got this down below anyway.
yes, I have noticed too late, sorry.
Quoted 41 lines
Quoted 18 lines
The
ofono_lte_default_attach_infois extended with protocol, authentication method, username and password.
The transmission of this info from the src to the atom happens through the existingset_default_attach_info.
A signal is emitted when one of these properties changesCo-authored-by Martin Baschin <[email protected]>--- include/lte.h | 5 +++++ 1 file changed, 5 insertions(+)include/lte.h +0
-0include/lte.h line 6
Quoted 4 lines
include/lte.h +1
-0@@ -3,6 +3,7 @@* oFono - Open Source Telephony * * Copyright (C) 2016 Endocode AG. All rights reserved. +* Copyright (C) 2018 Gemalto M2M I wouldn't add a copyright line for a trivial change like this...
Quoted 4 lines
include/lte.h +0
-0* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as include/lte.h struct ofono_lte; · line 42
Quoted 10 lines
include/lte.h +4
-0@@ -32,6 +33,10 @@ struct ofono_lte;struct ofono_lte_default_attach_info {char apn[OFONO_GPRS_MAX_APN_LENGTH +1 ]; +enum ofono_gprs_proto proto; +enum ofono_gprs_auth_method auth_method; +char username[OFONO_GPRS_MAX_USERNAME_LENGTH +1 ]; +char password[OFONO_GPRS_MAX_PASSWORD_LENGTH +1 ]; };typedef void (*ofono_lte_cb_t )(const struct ofono_error *error,void *data);/Jonas
PATCH 3/5 src/lte: added proto and authentication handling
In reply to Giacinto CifelliThe ofono_lte_default_attach_info is extended with protocol, authentication method, username and password.
The transmission of this info from the src to the atom happens through the existing set_default_attach_info.
A signal is emitted when one of these properties changes
--- src/lte.c | 236 +++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 180 insertions(+), 56 deletions(-)
src/lte.c +180 -56
@@ -3,6 +3,7 @@* oFono - Open Source Telephony * * Copyright (C) 2016 Endocode AG. All rights reserved. +* Copyright (C) 2018 Gemalto M2M * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as
@@ -39,7 +40,11 @@#define SETTINGS_STORE "lte"#define SETTINGS_GROUP "Settings" -#define DEFAULT_APN_KEY "DefaultAccessPointName" +#define LTE_APN "DefaultAccessPointName" +#define LTE_PROTO "Protocol" +#define LTE_USERNAME "Username" +#define LTE_PASSWORD "Password" +#define LTE_AUTH_METHOD "AuthenticationMethod"struct ofono_lte {const struct ofono_lte_driver *driver;
@@ -57,6 +62,10 @@ static GSList *g_drivers = NULL;static void lte_load_settings (struct ofono_lte *lte) {char *apn; +char *proto_str; +char *auth_method_str; +char *username; +char *password;if (lte->imsi ==NULL )return ;
@@ -69,19 +78,57 @@ static void lte_load_settings(struct ofono_lte *lte)return ; } - apn =g_key_file_get_string (lte->settings,SETTINGS_GROUP , -DEFAULT_APN_KEY ,NULL ); -if (apn) { + apn =g_key_file_get_string (lte->settings,SETTINGS_GROUP , +LTE_APN ,NULL ); + proto_str =g_key_file_get_string (lte->settings,SETTINGS_GROUP , +LTE_PROTO ,NULL ); + auth_method_str =g_key_file_get_string (lte->settings,SETTINGS_GROUP , +LTE_AUTH_METHOD ,NULL ); + username =g_key_file_get_string (lte->settings,SETTINGS_GROUP , +LTE_USERNAME ,NULL ); + password =g_key_file_get_string (lte->settings,SETTINGS_GROUP , +LTE_PASSWORD ,NULL ); +if (apn &&is_valid_apn (apn))strcpy (lte->info.apn, apn); -g_free (apn); - } + +if (proto_str ==NULL ) + proto_str =g_strdup ("ip" ); + +/* this must have a valid default */ +if (!gprs_proto_from_string (proto_str, <e->info.proto)) + lte->info.proto =OFONO_GPRS_PROTO_IP ; + +if (auth_method_str ==NULL ) + auth_method_str =g_strdup ("none" ); + +/* this must have a valid default */ +if (!gprs_auth_method_from_string (auth_method_str, + <e->info.auth_method)) + lte->info.auth_method =OFONO_GPRS_AUTH_METHOD_NONE ; + +if (username &&strlen (username) <=OFONO_GPRS_MAX_USERNAME_LENGTH ) +strcpy (lte->info.username, username); + +if (password &&strlen (password) <=OFONO_GPRS_MAX_PASSWORD_LENGTH ) +strcpy (lte->info.password, password); + +g_free (apn); +g_free (proto_str); +g_free (auth_method_str); +g_free (username); +g_free (password); }static DBusMessage *lte_get_properties (DBusConnection *conn,DBusMessage *msg,void *data) {struct ofono_lte *lte = data; +const char *proto =gprs_proto_to_string (lte->info.proto);const char *apn = lte->info.apn; +const char * auth_method = +gprs_auth_method_to_string (lte->info.auth_method); +const char *username = lte->info.username; +const char *password = lte->info.password;DBusMessage *reply;DBusMessageIter iter;DBusMessageIter dict;
@@ -95,20 +142,28 @@ static DBusMessage *lte_get_properties(DBusConnection *conn,dbus_message_iter_open_container (&iter,DBUS_TYPE_ARRAY ,OFONO_PROPERTIES_ARRAY_SIGNATURE , &dict); -ofono_dbus_dict_append (&dict,DEFAULT_APN_KEY ,DBUS_TYPE_STRING , &apn); +ofono_dbus_dict_append (&dict,LTE_APN ,DBUS_TYPE_STRING , &apn); +ofono_dbus_dict_append (&dict,LTE_PROTO ,DBUS_TYPE_STRING , &proto); +ofono_dbus_dict_append (&dict,LTE_AUTH_METHOD ,DBUS_TYPE_STRING , + &auth_method); +ofono_dbus_dict_append (&dict,LTE_USERNAME ,DBUS_TYPE_STRING , + &username); +ofono_dbus_dict_append (&dict,LTE_PASSWORD ,DBUS_TYPE_STRING , + &password);dbus_message_iter_close_container (&iter, &dict);return reply; }static void lte_set_default_attach_info_cb (const struct ofono_error *error, -void *data) +void *data) {struct ofono_lte *lte = data;const char *path =__ofono_atom_get_path (lte->atom);DBusConnection *conn =ofono_dbus_get_connection ();DBusMessage *reply; -const char *apn = lte->info.apn; +const char *key; +const char *propstr =NULL ;DBG ("%s error %d" , path, error->type);
@@ -118,55 +173,65 @@ static void lte_set_default_attach_info_cb(const struct ofono_error *error,return ; } -g_strlcpy (lte->info.apn, lte->pending_info.apn, -OFONO_GPRS_MAX_APN_LENGTH +1 ); +if (!g_str_equal (lte->pending_info.apn, lte->info.apn)) { +g_strlcpy (lte->info.apn, lte->pending_info.apn, +OFONO_GPRS_MAX_APN_LENGTH +1 ); + key =LTE_APN ; + propstr = lte->info.apn; + }else if (lte->pending_info.proto != lte->info.proto) { + lte->info.proto = lte->pending_info.proto; + key =LTE_PROTO ; + propstr =gprs_proto_to_string (lte->info.proto); + }else if (lte->pending_info.auth_method != lte->info.auth_method) { + lte->info.auth_method = lte->pending_info.auth_method; + key =LTE_AUTH_METHOD ; + propstr =gprs_auth_method_to_string (lte->info.auth_method); + + }else if (!g_str_equal (lte->pending_info.username, + lte->info.username)) { +g_strlcpy (lte->info.username, lte->pending_info.username, +OFONO_GPRS_MAX_USERNAME_LENGTH +1 ); + key =LTE_USERNAME ; + propstr = lte->info.username; + }else if (!g_str_equal (lte->pending_info.password, + lte->info.password)) { +g_strlcpy (lte->info.password, lte->pending_info.password, +OFONO_GPRS_MAX_PASSWORD_LENGTH +1 ); + key =LTE_PASSWORD ; + propstr = lte->info.password; + }else { +/* +* this should never happen, because no property change is +* checked before. +* Neverthelss, in this case it will answer the D-Bus message +* but emit no signal +*/ +ofono_error ("unexpected property change: ignored" ); + key =NULL ; + } + + reply =dbus_message_new_method_return (lte->pending); +__ofono_dbus_pending_reply (<e->pending, reply); + +if (!key) +return ;if (lte->settings) { -if (strlen (lte->info.apn) ==0 ) -/* Clear entry on empty APN. */ -g_key_file_remove_key (lte->settings,SETTINGS_GROUP , -DEFAULT_APN_KEY ,NULL ); +if (!*propstr) +/* Clear entry on empty string. */ +g_key_file_remove_key (lte->settings, +SETTINGS_GROUP , key,NULL );else -g_key_file_set_string (lte->settings,SETTINGS_GROUP , -DEFAULT_APN_KEY , lte->info.apn); +g_key_file_set_string (lte->settings, +SETTINGS_GROUP , key, propstr);storage_sync (lte->imsi,SETTINGS_STORE , lte->settings); } - reply =dbus_message_new_method_return (lte->pending); -__ofono_dbus_pending_reply (<e->pending, reply); -ofono_dbus_signal_property_changed (conn, path,OFONO_CONNECTION_CONTEXT_INTERFACE , -DEFAULT_APN_KEY , -DBUS_TYPE_STRING , &apn); -} - -static DBusMessage *lte_set_default_apn (struct ofono_lte *lte, -DBusConnection *conn,DBusMessage *msg, -const char *apn) -{ -if (lte->driver->set_default_attach_info ==NULL ) -return __ofono_error_not_implemented (msg); - -if (lte->pending) -return __ofono_error_busy (msg); - -if (g_str_equal (apn, lte->info.apn)) -return dbus_message_new_method_return (msg); - -/* We do care about empty value: it can be used for reset. */ -if (is_valid_apn (apn) == FALSE && apn[0 ] !='\0' ) -return __ofono_error_invalid_format (msg); - - lte->pending =dbus_message_ref (msg); - -g_strlcpy (lte->pending_info.apn, apn,OFONO_GPRS_MAX_APN_LENGTH +1 ); - - lte->driver->set_default_attach_info (lte, <e->pending_info, - lte_set_default_attach_info_cb, lte); - -return NULL ; + key, +DBUS_TYPE_STRING , &propstr); } static DBusMessage *lte_set_property(DBusConnection *conn,
@@ -177,6 +242,14 @@ static DBusMessage *lte_set_property(DBusConnection *conn,DBusMessageIter var;const char *property;const char *str; +enum ofono_gprs_auth_method auth_method; +enum ofono_gprs_proto proto; + +if (lte->driver->set_default_attach_info ==NULL ) +return __ofono_error_not_implemented (msg); + +if (lte->pending) +return __ofono_error_busy (msg);if (!dbus_message_iter_init (msg, &iter))return __ofono_error_invalid_args (msg);
@@ -192,16 +265,67 @@ static DBusMessage *lte_set_property(DBusConnection *conn,dbus_message_iter_recurse (&iter, &var); -if (!strcmp (property,DEFAULT_APN_KEY )) { -if (dbus_message_iter_get_arg_type (&var) !=DBUS_TYPE_STRING ) -return __ofono_error_invalid_args (msg); +if (dbus_message_iter_get_arg_type (&var) !=DBUS_TYPE_STRING ) +return __ofono_error_invalid_args (msg); -dbus_message_iter_get_basic (&var, &str); +dbus_message_iter_get_basic (&var, &str); -return lte_set_default_apn (lte, conn, msg, str); - } +if ((strcmp (property,LTE_APN ) ==0 )) { + +if (g_str_equal (str, lte->info.apn)) +return dbus_message_new_method_return (msg); + +/* We do care about empty value: it can be used for reset. */ +if (is_valid_apn (str) == FALSE && str[0 ] !='\0' ) +return __ofono_error_invalid_format (msg); + +g_strlcpy (lte->pending_info.apn, str, +OFONO_GPRS_MAX_APN_LENGTH +1 ); + + }else if ((strcmp (property,LTE_PROTO ) ==0 )) { + +if (!gprs_proto_from_string (str, &proto)) +return __ofono_error_invalid_format (msg); + +if (proto == lte->info.proto) +return dbus_message_new_method_return (msg); + + lte->pending_info.proto = proto; -return __ofono_error_invalid_args (msg); + }else if (strcmp (property,LTE_AUTH_METHOD ) ==0 ) { + +if (!gprs_auth_method_from_string (str, &auth_method)) +return __ofono_error_invalid_format (msg); + +if (auth_method == lte->info.auth_method) +return dbus_message_new_method_return (msg); + + lte->pending_info.auth_method = auth_method; + + }else if (strcmp (property,LTE_USERNAME ) ==0 ) { + +if (g_str_equal (str, lte->info.username)) +return dbus_message_new_method_return (msg); + +g_strlcpy (lte->pending_info.username, str, +OFONO_GPRS_MAX_USERNAME_LENGTH +1 ); + + }else if (strcmp (property,LTE_PASSWORD ) ==0 ) { + +if (g_str_equal (str, lte->info.password)) +return dbus_message_new_method_return (msg); + +g_strlcpy (lte->pending_info.password, str, +OFONO_GPRS_MAX_PASSWORD_LENGTH +1 ); + + }else +return __ofono_error_invalid_args (msg); + + lte->pending =dbus_message_ref (msg); + lte->driver->set_default_attach_info (lte, <e->pending_info, + lte_set_default_attach_info_cb, lte); + +return NULL ; }static const GDBusMethodTable lte_methods[] = {
Signature · 1 line
2.17.1
PATCH 4/5 atmodem/lte: proto and authentication handling
In reply to Giacinto CifelliThe ofono_lte_default_attach_info now handles also the protocol and the authentication method, username and password.
--- drivers/atmodem/lte.c | 82 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 71 insertions(+), 11 deletions(-)
drivers/atmodem/lte.c +71 -11
@@ -3,6 +3,7 @@* oFono - Open Source Telephony * * Copyright (C) 2017 Intel Corporation. All rights reserved. +* Copyright (C) 2018 Gemalto M2M * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as
@@ -39,16 +40,25 @@#include "gatchat.h" #include "gatresult.h" +#include "common.h" +#include "atmodem.h" struct lte_driver_data {GAtChat *chat; }; -static void at_lte_set_default_attach_info_cb (gboolean ok,GAtResult *result, +struct lte_callbackdata { +ofono_lte_cb_t cb; +void *data; +struct lte_driver_data *ldd; +const struct ofono_lte_default_attach_info *info; +}; + +static void at_lte_set_auth_cb (gboolean ok,GAtResult *result,gpointer user_data) { -struct cb_data *cbd = user_data; +struct lte_callbackdata *cbd = user_data;ofono_lte_cb_t cb = cbd->cb;struct ofono_error error;
@@ -58,25 +68,77 @@ static void at_lte_set_default_attach_info_cb(gboolean ok, GAtResult *result,cb (&error, cbd->data); } +static void at_lte_set_auth (gboolean ok,GAtResult *result,gpointer user_data) +{ +struct lte_callbackdata *cbd = user_data; +ofono_lte_cb_t cb = cbd->cb; +void *data = cbd->data; +struct ofono_error error; +char buf[32 +OFONO_GPRS_MAX_USERNAME_LENGTH + +OFONO_GPRS_MAX_PASSWORD_LENGTH +1 ]; +guint buflen =sizeof (buf); +guint len; +enum ofono_gprs_auth_method auth_method; + +if (!ok) { +g_free (cbd); +decode_at_error (&error,g_at_result_final_response (result)); +cb (&error, data); + } + + len =snprintf (buf, buflen,"AT+CGAUTH=0," ); + buflen -= len; + auth_method = cbd->info->auth_method; + +/* change the authentication method if the parameters are invalid */ +if (!*cbd->info->username || !*cbd->info->password) + auth_method =OFONO_GPRS_AUTH_METHOD_NONE ; + +switch (auth_method) { +case OFONO_GPRS_AUTH_METHOD_PAP : +snprintf (buf + len, buflen,"1,\"%s\",\"%s\"" , + cbd->info->username, cbd->info->password); +break ; +case OFONO_GPRS_AUTH_METHOD_CHAP : +snprintf (buf + len, buflen,"2,\"%s\",\"%s\"" , + cbd->info->username, cbd->info->password); +break ; +case OFONO_GPRS_AUTH_METHOD_NONE : +snprintf (buf + len, buflen,"0" ); +break ; + } + +if (g_at_chat_send (cbd->ldd->chat, buf,NULL , + at_lte_set_auth_cb, cbd, g_free) >0 ) +return ; + +CALLBACK_WITH_FAILURE (cb, data); +} +static void at_lte_set_default_attach_info (const struct ofono_lte *lte,const struct ofono_lte_default_attach_info *info,ofono_lte_cb_t cb,void *data) {struct lte_driver_data *ldd =ofono_lte_get_data (lte);char buf[32 +OFONO_GPRS_MAX_APN_LENGTH +1 ]; -struct cb_data *cbd =cb_data_new (cb, data); + struct lte_callbackdata *cbd = g_new0(struct lte_callbackdata ,1); +const char *proto =gprs_proto_to_string (info->proto);DBG ("LTE config with APN: %s" , info->apn); + cbd->cb = cb; + cbd->data = data; + cbd->ldd = ldd; + cbd->info = info; +if (strlen (info->apn) >0 ) -snprintf (buf,sizeof (buf),"AT+CGDCONT=0,\"IP\",\"%s\"" , - info->apn); +snprintf (buf,sizeof (buf), +"AT+CGDCONT=0,\"%s\",\"%s\"" , proto, info->apn);else -snprintf (buf,sizeof (buf),"AT+CGDCONT=0,\"IP\"" ); +snprintf (buf,sizeof (buf),"AT+CGDCONT=0,\"%s\"" , proto); -/* We can't do much in case of failure so don't check response. */ if (g_at_chat_send (ldd->chat, buf,NULL , - at_lte_set_default_attach_info_cb, cbd, g_free) >0 ) + at_lte_set_auth, cbd,NULL ) >0 )return ;CALLBACK_WITH_FAILURE (cb, data);
@@ -84,9 +146,7 @@ static void at_lte_set_default_attach_info(const struct ofono_lte *lte,static gboolean lte_delayed_register (gpointer user_data) { -struct ofono_lte *lte = user_data; - -ofono_lte_register (lte); +ofono_lte_register (user_data);return FALSE; }
Signature · 1 line
2.17.1
PATCH 5/5 Gemalto contributors so far
In reply to Giacinto Cifelli--- AUTHORS | 2 ++ 1 file changed, 2 insertions(+)
AUTHORS +2 -0
@@ -138,3 +138,5 @@ Florent Beillonnet <[email protected]> Martin Hundebøll <[email protected]> Julien Tournier <[email protected]> Nandini Rebello <[email protected]> +Martin Baschin <[email protected]> +Giacinto Cifelli <[email protected]>
Signature · 1 line
2.17.1
Re: [PATCH 5/5] Gemalto contributors so far
Hi,
Denis already asked you to drop this patch.
/Jonas
Quoted 15 lines · Giacinto Cifelli
Co-authored-by Martin Baschin <[email protected]>--- AUTHORS | 2 ++ 1 file changed, 2 insertions(+)AUTHORS +2
-0@@ -138,3 +138,5 @@ Florent Beillonnet <[email protected]> Martin Hundebøll <[email protected]> Julien Tournier <[email protected]> Nandini Rebello <[email protected]> +Martin Baschin <[email protected]> +Giacinto Cifelli <[email protected]>
Re: [PATCH 5/5] Gemalto contributors so far
I missed that part, I only noticed the co-author bit.
To be honest, I don't really care that I get mentioned, but I would like that the people who work with me aren't forgotten.
thanks :)
Quoted 25 lines · Jonas Bonn
Hi,
Denis already asked you to drop this patch.
/Jonas
Quoted 15 lines · Giacinto Cifelli
Co-authored-by Martin Baschin <[email protected]>--- AUTHORS | 2 ++ 1 file changed, 2 insertions(+)AUTHORS +2
-0@@ -138,3 +138,5 @@ Florent Beillonnet <[email protected]> Martin Hundebøll <[email protected]> Julien Tournier <[email protected]> Nandini Rebello <[email protected]> +Martin Baschin <[email protected]> +Giacinto Cifelli <[email protected]>
Hi Giacinto,
Could you provide an ofono log showing the network registration behaviour for both the case where you pass incorrect authentication parameters via the default context and the case where you pass valid parameters?
/Jonas
Quoted 58 lines · Giacinto Cifelli
added 4 properties for handling the type of context and the authentication method, exactly like in any gprs context handling. The properties are named after the equivalent gprs-context one, for compatibility and uniformity.
Co-authored-by Martin Baschin <[email protected]>--- doc/lte-api.txt | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)doc/lte-api.txt +40
-0@@ -33,3 +33,43 @@ Properties string DefaultAccessPointName [readwrite] Setting this property to an empty string clears the default APN from the modem. + + string Protocol [readwrite] + + Holds the protocol for this context. Valid values + are: "ip", "ipv6" and "dual". Default value is "ip". + + string AuthenticationMethod [readwrite] + + Sets the Method used for the authentication + for the default APN. + + Available values are "none", "pap" and "chap". + Default is "none". + + If the AuthenticationMethod is set to 'none' it remove + the authentication for the DefaultAPN. + In case of AuthenticationMethod 'none', + if the Username and Password properties are not empty, + the values are preserved in the properties, but they + are not used or transmitted to the module. + Conversely, if Username or Password are empty, the + authentication method selected internally is 'none', + but the property AuthenticationMethod is left unchanged. + + If the default APN supports authentication and it + fails, then it is up to the network how to proceed. + In general LTE access is denied and the modem can + fallback to a legacy technology if capable and another + radio technology is available. + + string Username [readwrite] + + Holds the username to be used for authentication + purposes. + + string Password [readwrite] + + Holds the password to be used for authentication + purposes. +
Hi,
Quoted 8 lines · Jonas Bonn
Hi Giacinto,
Could you provide an ofono log showing the network registration behaviour for both the case where you pass incorrect authentication parameters via the default context and the case where you pass valid parameters?
ok, I can do it with a network simulator. I will try to do it next week.
By the way, now that I remember, authentication on the default context is a requirement for the Softbank certification.
Quoted 3 lines
/Jonas
Giacinto
Hi Jonas,
it turns out we have setup in our testnet an apn with authentication, so I didn't need to wait until next week for this test.
However, as I was going to test, I have noticed a few things:
- the current patch adds a 'standard' feature. As such, it doesn't really apply to Gemalto modules. For this, I need to submit afterwards another patch for the vendor-specific code. Au passage, it would help answering my question about where to put shared vendor code in the atmodem driver. Now that I know the process, I might as well submit my proposal as --rfc. I am therefore in a very frustrating situation that I cannot test exactly this code. Also, I am some 150-200 commits away from being able to run properly our modules, with the plugin quite different from how it is today. Bottom line: I test my code, but when I need to abstract some parts like the one under discussion, it gets harder until the whole sequence gets more concrete. I understand that these steps must be followed to have clean commits, but I need some latitude here.
- what would an ofono trace show? practically nothing. In order to see something significant, I would need to make an STT or a QXDM trace (that I am not allowed to share), or a network-side trace, that I cannot do.
- the second best thing is however a plain AT trace, and this is below, with some comments. I took it with "microcom port | timestamp_script". The pipe might produce the time difference on the next line because of this, but it is informative nevertheless. I have configured first a normal apn (ber2-ericsson), then the one that requires authentication (ber-auth.ericsson), but without supplying the needed parameters, which is the current situation of the ofono
project: as expected, it tries a few times, the timer T3346 kicks in and it attaches to 3G. Then I give the authentication information, and gets LTE coverage.
Regards,
Giacinto
[2018-10-12 16:16:27+0200] at+cgdcont?
[2018-10-12 16:16:27+0200] +CGDCONT:
1,"IP","ber2.ericsson","0.0.0.0",0,0,0,0,0,0 [2018-10-12 16:16:27+0200] +CGDCONT:
2,"IPV4V6","ims","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,1,1 [2018-10-12 16:16:27+0200] +CGDCONT:
3,"IPV4V6","sos","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,1,1,1 [2018-10-12 16:16:27+0200]
[2018-10-12 16:16:27+0200] OK
[2018-10-12 16:16:32+0200] at+cfun=1
[2018-10-12 16:16:32+0200] OK
[2018-10-12 16:16:32+0200]
[2018-10-12 16:16:32+0200] ^SYSSTART
[2018-10-12 16:16:32+0200]
[2018-10-12 16:16:32+0200] +CREG: 4
[2018-10-12 16:16:32+0200]
[2018-10-12 16:16:32+0200] +CREG: 2
[2018-10-12 16:16:32+0200]
// 0 seconds
[2018-10-12 16:16:32+0200] +CREG: 1,"009B","0009B03",7 [2018-10-12 16:16:37+0200] at+cops?
[2018-10-12 16:16:37+0200] +COPS: 0,0,"EDAV",7 [2018-10-12 16:16:37+0200]
[2018-10-12 16:16:37+0200] OK
[2018-10-12 16:16:43+0200] at+cfun=4
[2018-10-12 16:16:43+0200] OK
[2018-10-12 16:16:43+0200]
[2018-10-12 16:16:43+0200] ^SYSSTART AIRPLANE MODE [2018-10-12 16:16:43+0200]
[2018-10-12 16:16:43+0200] +CREG: 0
[2018-10-12 16:17:33+0200] at+cgdcont=1,"IP","ber-auth.ericsson" [2018-10-12 16:17:33+0200] OK
[2018-10-12 16:17:39+0200] at+cfun=1
[2018-10-12 16:17:39+0200] OK
[2018-10-12 16:17:39+0200]
[2018-10-12 16:17:39+0200] ^SYSSTART
[2018-10-12 16:17:39+0200]
[2018-10-12 16:17:39+0200] +CREG: 4
[2018-10-12 16:17:40+0200]
[2018-10-12 16:17:40+0200] +CREG: 2
[2018-10-12 16:18:02+0200]
// 22 seconds
[2018-10-12 16:18:02+0200] +CREG: 1,"012F","12F3C3D",6 [2018-10-12 16:18:25+0200] at+cops?
[2018-10-12 16:18:25+0200] +COPS: 0,0,"EDAV",6 [2018-10-12 16:18:25+0200]
[2018-10-12 16:18:25+0200] OK
[2018-10-12 16:18:30+0200] at+cfun=4
[2018-10-12 16:18:30+0200] OK
[2018-10-12 16:18:31+0200]
[2018-10-12 16:18:31+0200] ^SYSSTART AIRPLANE MODE [2018-10-12 16:18:31+0200]
[2018-10-12 16:18:31+0200] +CREG: 0
[2018-10-12 16:19:04+0200] at^sgauth=1,2,"gemalto","gemalto" [2018-10-12 16:19:04+0200] OK
[2018-10-12 16:19:24+0200] at+cgdcont?
[2018-10-12 16:19:24+0200] +CGDCONT:
1,"IP","ber-auth.ericsson","0.0.0.0",0,0,0,0,0,0 [2018-10-12 16:19:24+0200] +CGDCONT:
2,"IPV4V6","ims","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,1,1 [2018-10-12 16:19:24+0200] +CGDCONT:
3,"IPV4V6","sos","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,1,1,1 [2018-10-12 16:19:24+0200]
[2018-10-12 16:19:24+0200] OK
[2018-10-12 16:19:32+0200] at+cfun=1
[2018-10-12 16:19:32+0200] OK
[2018-10-12 16:19:32+0200]
[2018-10-12 16:19:32+0200] ^SYSSTART
[2018-10-12 16:19:32+0200]
[2018-10-12 16:19:32+0200] +CREG: 4
[2018-10-12 16:19:32+0200]
[2018-10-12 16:19:32+0200] +CREG: 2
[2018-10-12 16:19:32+0200]
0 seconds, last network
[2018-10-12 16:19:32+0200] +CREG: 1,"012F","12F3C3D",6 [2018-10-12 16:19:38+0200]
6 seconds, reselection on idle
[2018-10-12 16:19:38+0200] +CREG: 1,"009B","0009B03",7 [2018-10-12 16:19:49+0200] at+cfun=4
[2018-10-12 16:19:49+0200] OK
[2018-10-12 16:19:49+0200]
[2018-10-12 16:19:49+0200] ^SYSSTART AIRPLANE MODE [2018-10-12 16:19:49+0200]
[2018-10-12 16:19:49+0200] +CREG: 0
[2018-10-12 16:19:52+0200] at+cfun=1
[2018-10-12 16:19:52+0200] OK
[2018-10-12 16:19:52+0200]
[2018-10-12 16:19:52+0200] ^SYSSTART
[2018-10-12 16:19:52+0200]
[2018-10-12 16:19:52+0200] +CREG: 4
[2018-10-12 16:19:53+0200]
[2018-10-12 16:19:53+0200] +CREG: 2
[2018-10-12 16:19:53+0200]
// 0 seconds
[2018-10-12 16:19:53+0200] +CREG: 1,"009B","0009B03",7 [2018-10-12 16:19:57+0200] at+cgdcont?
[2018-10-12 16:19:57+0200] +CGDCONT:
1,"IP","ber-auth.ericsson","0.0.0.0",0,0,0,0,0,0 [2018-10-12 16:19:57+0200] +CGDCONT:
2,"IPV4V6","ims","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0,1,1 [2018-10-12 16:19:57+0200] +CGDCONT:
3,"IPV4V6","sos","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,1,1,1 [2018-10-12 16:19:57+0200]
[2018-10-12 16:19:57+0200] OK
[2018-10-12 16:20:00+0200] at+cops?
[2018-10-12 16:20:00+0200] +COPS: 0,0,"EDAV",7 [2018-10-12 16:20:00+0200]
[2018-10-12 16:20:00+0200] OK
Quoted 23 lines · Giacinto Cifelli
Hi,
Quoted 8 lines · Jonas Bonn
Hi Giacinto,
Could you provide an ofono log showing the network registration behaviour for both the case where you pass incorrect authentication parameters via the default context and the case where you pass valid parameters?
ok, I can do it with a network simulator. I will try to do it next week.
By the way, now that I remember, authentication on the default context is a requirement for the Softbank certification.
Quoted 3 lines
/Jonas
Giacinto