pwm: Collected LPSS-pwm patches for 4.20
Subsystems (3)
cover pwm: Collected LPSS-pwm patches for 4.20
Hi Thierry,
I've 3 different pwm-lpss patch-sets outstanding, 2 of which have seen multiple revisions.
For your convenience here is a series which collects the latest version of them all including all the acks and reviews they have received.
This series superceeds / replaces all my other outstanding pwm patches.
The first patch is an ACPI patch, which is a dependency for the fourth patch in the series. This has an Acked-by from Rafael, indicating that he is ok with merging this simple one-line patch through your PWM tree.
Regards,
Hans
PATCH 1/6 ACPI / PM: Export acpi_device_get_power() for use by modular build drivers
Export acpi_device_get_power() for use by modular build drivers.
---
Changes in v4:
-New patch in v4 of this patch-set
--- drivers/acpi/device_pm.c | 1 + 1 file changed, 1 insertion(+)
drivers/acpi/device_pm.c +1 -0
@@ -126,6 +126,7 @@ int acpi_device_get_power(struct acpi_device *device, int *state)return 0 ; } +EXPORT_SYMBOL (acpi_device_get_power);static int acpi_dev_pm_explicit_set (struct acpi_device *adev,int state) {
Signature · 1 line
2.19.0
PATCH 2/6 pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices
In reply to Hans de GoedeThe second PWM controller on Cherry Trail devices uses a separate ACPI
HID: "80862289", add this so that the driver will properly bind to the second PWM controller.
The second PWM controller is usually not used, the main thing gained by this is properly putting the PWM controller in D3 on suspend.
--- drivers/pwm/pwm-lpss-platform.c | 1 + 1 file changed, 1 insertion(+)
drivers/pwm/pwm-lpss-platform.c +1 -0
@@ -81,6 +81,7 @@ static SIMPLE_DEV_PM_OPS(pwm_lpss_platform_pm_ops,static const struct acpi_device_id pwm_lpss_acpi_match[] = { {"80860F09" , (unsigned long )&pwm_lpss_byt_info }, {"80862288" , (unsigned long )&pwm_lpss_bsw_info }, + {"80862289" , (unsigned long )&pwm_lpss_bsw_info }, {"80865AC8" , (unsigned long )&pwm_lpss_bxt_info }, { }, };
Signature · 1 line
2.19.0
PATCH 3/6 pwm: lpss: Move struct pwm_lpss_chip definition to the header file
In reply to Hans de GoedeMove struct pwm_lpss_chip definition from pwm-lpss.c to pwm-lpss.h, so that the pci/platform drivers can access the info member (struct pwm_lpss_boardinfo *).
This is a preparation patch for adding platform specific quirks, which the drivers need access to, to pwm_lpss_boardinfo.
---
Changes in v4:
-No changes in v4 of this patch-set
Changes in v3:
-There was no v3, but I accidentally put v3 in the Subject of the v2
patches, so lets skip v3
Changes in v2:
-No changes in v2 of this patch-set
--- drivers/pwm/pwm-lpss.c | 9 --------- drivers/pwm/pwm-lpss.h | 9 ++++++++- 2 files changed, 8 insertions(+), 10 deletions(-)
drivers/pwm/pwm-lpss.c +0 -9
@@ -32,15 +32,6 @@/* Size of each PWM register space if multiple */ #define PWM_SIZE 0x400 -#define MAX_PWMS 4 - -struct pwm_lpss_chip { -struct pwm_chip chip; -void __iomem *regs; -const struct pwm_lpss_boardinfo *info; -u32 saved_ctrl[MAX_PWMS ]; -}; -static inline struct pwm_lpss_chip *to_lpwm (struct pwm_chip *chip) { return container_of(chip, struct pwm_lpss_chip, chip);
drivers/pwm/pwm-lpss.h +8 -1
@@ -16,7 +16,14 @@#include <linux/device.h> #include <linux/pwm.h> -struct pwm_lpss_chip ; +#define MAX_PWMS 4 + +struct pwm_lpss_chip { +struct pwm_chip chip; +void __iomem *regs; +const struct pwm_lpss_boardinfo *info; +u32 saved_ctrl[MAX_PWMS ]; +};struct pwm_lpss_boardinfo {unsigned long clk_rate;
Signature · 1 line
2.19.0
PATCH 4/6 pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices
In reply to Hans de GoedeThe _PS0 method for the integrated graphics on some Cherry Trail devices (observed on a HP Pavilion X2 10-p0XX) turns on the PWM chip (puts it in D0), causing an inconsistency between the state the pm-core thinks it is in (left runtime suspended as it was before the suspend/resume) and the state it actually is in.
Interestingly enough this is done on a device where the pwm controller is not used for the backlight at all, since it uses an eDP panel. On devices where the PWM is used this is not a problem since we will resume it ourselves anyways.
This inconsistency causes us to never suspend the pwm controller again, which causes the device to not be able to reach S0ix states when suspended.
This commit adds a resume-complete handler, which when we think the device is still run-time suspended checks the actual power-state and if necessary updates the rpm-core's internal state.
This fixes the Pavilion X2 10-p0XX not reaching S0ix states when suspended.
---
Changes in v4:
-Use acpi_device_get_power() instead of manually calling _PSC
Changes in v3:
-There was no v3, but I accidentally put v3 in the Subject of the v2
patches, so lets skip v3
Changes in v2:
-Do the pm_runtime_en/disable before/after checking the power-state
--- drivers/pwm/pwm-lpss-platform.c | 25 ++++++++++++++++++++++--- drivers/pwm/pwm-lpss.h | 2 ++ 2 files changed, 24 insertions(+), 3 deletions(-)
drivers/pwm/pwm-lpss-platform.c +22 -3
@@ -30,6 +30,7 @@ static const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = { .clk_rate = 19200000, .npwm = 1, .base_unit_bits = 16, + .check_power_on_resume = true, };/* Broxton */
@@ -74,9 +75,27 @@ static int pwm_lpss_remove_platform(struct platform_device *pdev)return pwm_lpss_remove (lpwm); } -static SIMPLE_DEV_PM_OPS(pwm_lpss_platform_pm_ops, - pwm_lpss_suspend, - pwm_lpss_resume); +static void pwm_lpss_complete (struct device *dev) +{ +struct pwm_lpss_chip *lpwm =dev_get_drvdata (dev); +int ret, state; + +/* The PWM may be turned on by AML code, update our state to match */ +if (pm_runtime_suspended (dev) && lpwm->info->check_power_on_resume) { +pm_runtime_disable (dev); + + ret =acpi_device_get_power (ACPI_COMPANION (dev), &state); +if (ret ==0 && state ==ACPI_STATE_D0 ) +pm_runtime_set_active (dev); + +pm_runtime_enable (dev); + } +} + +static const struct dev_pm_ops pwm_lpss_platform_pm_ops = { + .complete = pwm_lpss_complete, +SET_SYSTEM_SLEEP_PM_OPS (pwm_lpss_suspend, pwm_lpss_resume) +};static const struct acpi_device_id pwm_lpss_acpi_match[] = { {"80860F09" , (unsigned long )&pwm_lpss_byt_info },
drivers/pwm/pwm-lpss.h +2 -0
@@ -30,6 +30,8 @@ struct pwm_lpss_boardinfo {unsigned int npwm;unsigned long base_unit_bits;bool bypass; +/* Some devices have AML code messing with the state underneath us */ +bool check_power_on_resume; }; struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
Signature · 1 line
2.19.0
PATCH 5/6 pwm: lpss: Release runtime-pm reference from the driver's remove callback
In reply to Hans de GoedeFor each pwm output which gets enabled through pwm_lpss_apply(), we do a pm_runtime_get_sync().
This commit adds pm_runtime_put() calls to pwm_lpss_remove() to balance these when the driver gets removed with some of the outputs still enabled.
---
Changes in v2:
-New patch in v2 of this patch-set replacing "pwm: lpss: Add
pwm_lpss_get_put_runtime_pm helper function"
--- drivers/pwm/pwm-lpss.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/pwm/pwm-lpss.c +6 -0
@@ -205,6 +205,12 @@ EXPORT_SYMBOL_GPL(pwm_lpss_probe);int pwm_lpss_remove (struct pwm_lpss_chip *lpwm) { +int i; + +for (i =0 ; i < lpwm->info->npwm; i++) { +if (pwm_is_enabled (&lpwm->chip.pwms[i])) +pm_runtime_put (lpwm->chip.dev); + }return pwmchip_remove (&lpwm->chip); }EXPORT_SYMBOL_GPL (pwm_lpss_remove);
Signature · 1 line
2.19.0
PATCH 6/6 pwm: lpss: Add get_state callback
In reply to Hans de GoedeAdd a get_state callback so that the initial state correctly reflects the actual hardware state.
---
Changes in v2:
-Stop using the dropped pwm_lpss_get_put_runtime_pm() helper
--- drivers/pwm/pwm-lpss.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
drivers/pwm/pwm-lpss.c +34 -0
@@ -159,8 +159,42 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,return 0 ; } +/* This function gets called once from pwmchip_add to get the initial state */ +static void pwm_lpss_get_state (struct pwm_chip *chip,struct pwm_device *pwm, +struct pwm_state *state) +{ +struct pwm_lpss_chip *lpwm =to_lpwm (chip); +unsigned long base_unit_range; +unsigned long long base_unit, freq, on_time_div; +u32 ctrl; + + base_unit_range =BIT (lpwm->info->base_unit_bits); + + ctrl =pwm_lpss_read (pwm); + on_time_div =255 - (ctrl &PWM_ON_TIME_DIV_MASK ); + base_unit = (ctrl >>PWM_BASE_UNIT_SHIFT ) & (base_unit_range -1 ); + + freq = base_unit * lpwm->info->clk_rate; +do_div (freq, base_unit_range); +if (freq ==0 ) + state->period =NSEC_PER_SEC ; +else + state->period =NSEC_PER_SEC / (unsigned long )freq; + + on_time_div *= state->period; +do_div (on_time_div,255 ); + state->duty_cycle = on_time_div; + + state->polarity =PWM_POLARITY_NORMAL ; + state->enabled = !!(ctrl &PWM_ENABLE ); + +if (state->enabled) +pm_runtime_get (chip->dev); +} +static const struct pwm_ops pwm_lpss_ops = { .apply = pwm_lpss_apply, + .get_state = pwm_lpss_get_state, .owner =THIS_MODULE , };
Signature · 1 line
2.19.0
Quoted 5 lines · Hans de Goede
Hi Thierry,
I've 3 different pwm-lpss patch-sets outstanding, 2 of which have seen multiple revisions.
Quoted 8 lines
For your convenience here is a series which collects the latest version of them all including all the acks and reviews they have received.
This series superceeds / replaces all my other outstanding pwm patches.
The first patch is an ACPI patch, which is a dependency for the fourth patch in the series. This has an Acked-by from Rafael, indicating that he is ok with merging this simple one-line patch through your PWM tree.
All applied, thanks.
Thierry