ARM: Samsung: Add Exynos5422-based Odroid HC2 support

PATCH New Meul 5 participants 6 messages Oct 14, 2018 – Oct 22, 2018 Arm Samsung Exynos

lore

Share & tools

lore

Meul

2018-10-14 16:49 UTC #0 lore raw

PATCH 1/1 ARM: Samsung: Add Exynos5422-based Odroid HC2 support

Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1.

The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2.

Signed-off-by Dirk Meul <[email protected]>

---
 board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++---
 board/samsung/common/exynos5-dt.c       |  4 ++--
 configs/odroid-xu3_defconfig            |  2 +-
 include/samsung/exynos5-dt-types.h      |  2 ++
 4 files changed, 18 insertions(+), 6 deletions(-)

board/samsung/common/exynos5-dt-types.c +13 -3

index 4473968db6..7a86e91877 100644
@@ -24,14 +24,15 @@ static const struct udevice_id board_ids[] = {
 };
 
 /**
- * Odroix XU3/XU4/HC1 board revisions (from HC1_MAIN_REV0.1_20170630.pdf):
+ * Odroix XU3/XU4/HC1/HC2 board revisions (from HC1+_HC2_MAIN_REV0.1_20171017.pdf):
  * Rev   ADCmax  Board
  * 0.1     0     XU3 0.1
  * 0.2   372     XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
  * 0.3  1280     XU4 0.1
  * 0.4   739     XU4 0.2
  * 0.5  1016     XU4+Air0.1 (Passive cooling)
- * 0.6  1308     XU4S 0.1 (HC1)
+ * 0.6  1309     XU4-HC1 0.1
+ * 0.7  1470     XU4-HC1+ 0.1 (HC2)
  * Use +1% for ADC value tolerance in the array below, the code loops until
  * the measured ADC value is lower than then ADCmax from the array.
  */

@@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = {
     { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
     { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" },
     { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" },
-    { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" },
+    { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" },
+    { EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" },
     { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
 };

@@ -144,6 +146,14 @@ bool board_is_odroidhc1(void)
     return false;
 }
 
+bool board_is_odroidhc2(void)
+{
+    if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01)
+        return true;
+
+    return false;
+}
+
 bool board_is_generic(void)
 {
     if (gd->board_type == EXYNOS5_BOARD_GENERIC)

board/samsung/common/exynos5-dt.c +2 -2

index 8c3a9ea564..c183965b92 100644
@@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char *devstr)
 {
     char *info = "Not supported!";
 
-    if (board_is_odroidxu4() || board_is_odroidhc1())
+    if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2())
         return info;
 
     return env_get("dfu_alt_system");

@@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char *devstr)
     char *alt_boot;
     int dev_num;
 
-    if (board_is_odroidxu4() || board_is_odroidhc1())
+    if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2())
         return info;
 
     dev_num = simple_strtoul(devstr, NULL, 10);

configs/odroid-xu3_defconfig +1 -1

index 258b9781cc..d5c7cc7129 100644
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_SYS_TEXT_BASE=0x43E00000
 CONFIG_ARCH_EXYNOS5=y
-CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1"
+CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=8
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

include/samsung/exynos5-dt-types.h +2 -0

index 8e11af30d1..8fe08fe211 100644
@@ -9,6 +9,7 @@ enum {
     EXYNOS5_BOARD_ODROID_XU3_REV02,
     EXYNOS5_BOARD_ODROID_XU4_REV01,
     EXYNOS5_BOARD_ODROID_HC1_REV01,
+    EXYNOS5_BOARD_ODROID_HC2_REV01,
     EXYNOS5_BOARD_ODROID_UNKNOWN,
 
     EXYNOS5_BOARD_COUNT,

@@ -25,5 +26,6 @@ bool board_is_generic(void);
 bool board_is_odroidxu3(void);
 bool board_is_odroidxu4(void);
 bool board_is_odroidhc1(void);
+bool board_is_odroidhc2(void);
 
 #endif

--
2.17.1

Marek Szyprowski

2018-10-15 07:44 UTC #1 lore raw

PATCH 1/1 ARM: Samsung: Add Exynos5422-based Odroid HC2 support

Hi All,

Quoted 6 lines · Dirk

Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1.
The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2.
Signed-off-by Dirk Meul <[email protected]>

I don't have access to HC2, but the code looks reasonable and does similar things
I did while adding support for Odroid HC1.

Acked-by Marek Szyprowski <[email protected]>

Quoted 116 lines

---
board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++--- board/samsung/common/exynos5-dt.c | 4 ++-- configs/odroid-xu3_defconfig | 2 +- include/samsung/exynos5-dt-types.h | 2 ++
 4 files changed, 18 insertions(+), 6 deletions(-)
board/samsung/common/exynos5-dt-types.c +0 -0
index 4473968db6..7a86e91877 100644
@@ -24,14 +24,15 @@ static const struct udevice_id board_ids[] = {
  };
/**
- * Odroix XU3/XU4/HC1 board revisions (from HC1_MAIN_REV0.1_20170630.pdf):
+ * Odroix XU3/XU4/HC1/HC2 board revisions (from HC1+_HC2_MAIN_REV0.1_20171017.pdf):
* Rev   ADCmax Board
* 0.1     0     XU3 0.1
* 0.2   372     XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
* 0.3 1280     XU4 0.1
* 0.4   739     XU4 0.2
* 0.5 1016     XU4+Air0.1 (Passive cooling)
- * 0.6 1308     XU4S 0.1 (HC1)
+ * 0.6 1309     XU4-HC1 0.1
+ * 0.7 1470     XU4-HC1+ 0.1 (HC2)
* Use +1% for ADC value tolerance in the array below, the code loops until
* the measured ADC value is lower than then ADCmax from the array. */
board/samsung/common/exynos5-dt-types.c +2 -1
@@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = {
      { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
      { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" },
      { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" },
-    { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" },
+    { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" },
+    { EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" },
      { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
  };
board/samsung/common/exynos5-dt-types.c +0 -0
@@ -144,6 +146,14 @@ bool board_is_odroidhc1(void)
      return false;
  }
board/samsung/common/exynos5-dt-types.c +8 -0
+bool board_is_odroidhc2(void)
+{
+    if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01)
+        return true;
+
+    return false;
+}
+
bool board_is_generic(void)
{
if (gd->board_type == EXYNOS5_BOARD_GENERIC)
board/samsung/common/exynos5-dt.c +0 -0
index 8c3a9ea564..c183965b92 100644
@@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char
 *devstr)
  {
      char *info = "Not supported!";
-    if (board_is_odroidxu4() || board_is_odroidhc1())
+    if (board_is_odroidxu4() || board_is_odroidhc1() ||
board_is_odroidhc2())
return info;

return env_get("dfu_alt_system");
board/samsung/common/exynos5-dt.c +0 -0
@@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char *devstr)
      char *alt_boot;
      int dev_num;
-    if (board_is_odroidxu4() || board_is_odroidhc1())
+    if (board_is_odroidxu4() || board_is_odroidhc1() ||
board_is_odroidhc2())
return info;

dev_num = simple_strtoul(devstr, NULL, 10);
configs/odroid-xu3_defconfig +0 -0
index 258b9781cc..d5c7cc7129 100644
@@ -2,7 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_ARCH_EXYNOS5=y
configs/odroid-xu3_defconfig +1 -1
-CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1"
+CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=8
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
include/samsung/exynos5-dt-types.h +1 -0
index 8e11af30d1..8fe08fe211 100644
@@ -9,6 +9,7 @@ enum {
      EXYNOS5_BOARD_ODROID_XU3_REV02,
      EXYNOS5_BOARD_ODROID_XU4_REV01,
      EXYNOS5_BOARD_ODROID_HC1_REV01,
+    EXYNOS5_BOARD_ODROID_HC2_REV01,
      EXYNOS5_BOARD_ODROID_UNKNOWN,
EXYNOS5_BOARD_COUNT,
include/samsung/exynos5-dt-types.h +1 -0
@@ -25,5 +26,6 @@ bool board_is_generic(void);
  bool board_is_odroidxu3(void);
  bool board_is_odroidxu4(void);
  bool board_is_odroidhc1(void);
+bool board_is_odroidhc2(void);

Quoted 6 lines

#endif
Signature · 1 line
2.17.1

Best regards

Signature · 2 lines

Marek Szyprowski, PhD
Samsung R&D Institute Poland

b/board/samsung/common/exynos5-dt-types.c index 4473968db6..7a86e91877 100644 --- a/board/samsung/common/exynos5-dt-types.c +++ b/board/samsung/common/exynos5-dt-types.c @@ -24,14 +24,15 @@ static const struct udevice_id board_ids[] = { };

/**
- * Odroix XU3/XU4/HC1 board revisions (from
HC1_MAIN_REV0.1_20170630.pdf):
+ * Odroix XU3/XU4/HC1/HC2 board revisions (from
HC1+_HC2_MAIN_REV0.1_20171017.pdf):

  * Rev   ADCmax  Board
  * 0.1     0     XU3 0.1
  * 0.2   372     XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 /
INA231)
  * 0.3  1280     XU4 0.1
  * 0.4   739     XU4 0.2
  * 0.5  1016     XU4+Air0.1 (Passive cooling)
- * 0.6  1308     XU4S 0.1 (HC1)
+ * 0.6  1309     XU4-HC1 0.1
+ * 0.7  1470     XU4-HC1+ 0.1 (HC2)

* Use +1% for ADC value tolerance in the array below, the code
loops until
* the measured ADC value is lower than then ADCmax from the array. */

board/samsung/common/exynos5-dt-types.c +10 -1

@@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = {
     { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
     { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" },
     { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" },
-    { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" },
+    { EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" },
+    { EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" },
     { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
 };

@@ -144,6 +146,14 @@ bool board_is_odroidhc1(void)
     return false;
 }
 
+bool board_is_odroidhc2(void)
+{
+    if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01)
+        return true;
+
+    return false;
+}
+
 bool board_is_generic(void)
 {
     if (gd->board_type == EXYNOS5_BOARD_GENERIC)

(quoted diff) +0 -0

b/board/samsung/common/exynos5-dt.c index 8c3a9ea564..c183965b92 100644 --- a/board/samsung/common/exynos5-dt.c
+++ b/board/samsung/common/exynos5-dt.c

board/samsung/common/exynos5-dt.c +2 -2

@@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char
 *devstr) {
     char *info = "Not supported!";
 
-    if (board_is_odroidxu4() || board_is_odroidhc1())
+    if (board_is_odroidxu4() || board_is_odroidhc1() ||
 board_is_odroidhc2()) return info;
 
     return env_get("dfu_alt_system");

@@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char
 *devstr) char *alt_boot;
     int dev_num;
 
-    if (board_is_odroidxu4() || board_is_odroidhc1())
+    if (board_is_odroidxu4() || board_is_odroidhc1() ||
 board_is_odroidhc2()) return info;
 
     dev_num = simple_strtoul(devstr, NULL, 10);

(quoted diff) +0 -0

b/configs/odroid-xu3_defconfig index 258b9781cc..d5c7cc7129 100644

configs/odroid-xu3_defconfig +1 -1

@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_SYS_TEXT_BASE=0x43E00000
 CONFIG_ARCH_EXYNOS5=y
-CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1"
+CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=8
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

(quoted diff) +0 -0

b/include/samsung/exynos5-dt-types.h index 8e11af30d1..8fe08fe211 100644 --- a/include/samsung/exynos5-dt-types.h
+++ b/include/samsung/exynos5-dt-types.h

include/samsung/exynos5-dt-types.h +2 -1

@@ -9,6 +9,7 @@ enum {
     EXYNOS5_BOARD_ODROID_XU3_REV02,
     EXYNOS5_BOARD_ODROID_XU4_REV01,
     EXYNOS5_BOARD_ODROID_HC1_REV01,
+    EXYNOS5_BOARD_ODROID_HC2_REV01,
     EXYNOS5_BOARD_ODROID_UNKNOWN,
 
     EXYNOS5_BOARD_COUNT,

@@ -25,5 +26,6 @@ bool board_is_generic(void);
 bool board_is_odroidxu3(void);
 bool board_is_odroidxu4(void);
 bool board_is_odroidhc1(void);
+bool board_is_odroidhc2(void);
 
 #endif
--

Quoted 3 lines

2.17.1

Reviewed-by Lukasz Majewski <[email protected]>

Best regards,

Lukasz Majewski

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181015/999024c1/attachment.sig>

Minkyu Kang

2018-10-17 06:26 UTC #3 lore raw

PATCH 1/1 ARM: Samsung: Add Exynos5422-based Odroid HC2 support

Dear Dirk Meul,

Quoted 15 lines · Lukasz Majewski

Hi Dirk,
Quoted 13 lines
Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1.
The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2.
Signed-off-by Dirk Meul <[email protected]>
---
 board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++---
 board/samsung/common/exynos5-dt.c       |  4 ++--
 configs/odroid-xu3_defconfig            |  2 +-
 include/samsung/exynos5-dt-types.h      |  2 ++
 4 files changed, 18 insertions(+), 6 deletions(-)

I failed to apply your patch.
Could you please check and resend?

checking file board/samsung/common/exynos5-dt-types.c Hunk #2 FAILED at 40.
Hunk #3 succeeded at 145 with fuzz 1.
1 out of 3 hunks FAILED
checking file board/samsung/common/exynos5-dt.c Hunk #1 FAILED at 179.
Hunk #2 FAILED at 192.
2 out of 2 hunks FAILED
checking file configs/odroid-xu3_defconfig checking file include/samsung/exynos5-dt-types.h Hunk #1 FAILED at 9.
1 out of 2 hunks FAILED

Thanks,
Minkyu Kang.

Dirk Meul

2018-10-18 18:44 UTC #4 lore raw

PATCH 1/1 ARM: Samsung: Add Exynos5422-based Odroid HC2 support

Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1.

The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2.

Signed-off-by Dirk Meul <[email protected]>

---
 board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++---
 board/samsung/common/exynos5-dt.c       |  4 ++--
 configs/odroid-xu3_defconfig            |  2 +-
 include/samsung/exynos5-dt-types.h      |  2 ++
 4 files changed, 18 insertions(+), 6 deletions(-)

board/samsung/common/exynos5-dt-types.c +13 -3

index 4473968db6..7a86e91877 100644
@@ -24,14 +24,15 @@ static const struct udevice_id board_ids[] = {
 };
 
 /**
- * Odroix XU3/XU4/HC1 board revisions (from HC1_MAIN_REV0.1_20170630.pdf):
+ * Odroix XU3/XU4/HC1/HC2 board revisions (from HC1+_HC2_MAIN_REV0.1_20171017.pdf):
  * Rev   ADCmax  Board
  * 0.1     0     XU3 0.1
  * 0.2   372     XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
  * 0.3  1280     XU4 0.1
  * 0.4   739     XU4 0.2
  * 0.5  1016     XU4+Air0.1 (Passive cooling)
- * 0.6  1308     XU4S 0.1 (HC1)
+ * 0.6  1309     XU4-HC1 0.1
+ * 0.7  1470     XU4-HC1+ 0.1 (HC2)
  * Use +1% for ADC value tolerance in the array below, the code loops until
  * the measured ADC value is lower than then ADCmax from the array.
  */

@@ -39,7 +40,8 @@ struct odroid_rev_info odroid_info[] = {
 	{ EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
 	{ EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 375, "xu3" },
 	{ EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1293, "xu4" },
-	{ EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1321, "hc1" },
+	{ EXYNOS5_BOARD_ODROID_HC1_REV01, 1, 1322, "hc1" },
+	{ EXYNOS5_BOARD_ODROID_HC2_REV01, 1, 1484, "hc1" },
 	{ EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
 };

@@ -144,6 +146,14 @@ bool board_is_odroidhc1(void)
 	return false;
 }
 
+bool board_is_odroidhc2(void)
+{
+	if (gd->board_type == EXYNOS5_BOARD_ODROID_HC2_REV01)
+		return true;
+
+	return false;
+}
+
 bool board_is_generic(void)
 {
 	if (gd->board_type == EXYNOS5_BOARD_GENERIC)

board/samsung/common/exynos5-dt.c +2 -2

index 8c3a9ea564..c183965b92 100644
@@ -179,7 +179,7 @@ char *get_dfu_alt_system(char *interface, char *devstr)
 {
 	char *info = "Not supported!";
 
-	if (board_is_odroidxu4() || board_is_odroidhc1())
+	if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2())
 		return info;
 
 	return env_get("dfu_alt_system");

@@ -192,7 +192,7 @@ char *get_dfu_alt_boot(char *interface, char *devstr)
 	char *alt_boot;
 	int dev_num;
 
-	if (board_is_odroidxu4() || board_is_odroidhc1())
+	if (board_is_odroidxu4() || board_is_odroidhc1() || board_is_odroidhc2())
 		return info;
 
 	dev_num = simple_strtoul(devstr, NULL, 10);

configs/odroid-xu3_defconfig +1 -1

index 258b9781cc..d5c7cc7129 100644
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_SYS_TEXT_BASE=0x43E00000
 CONFIG_ARCH_EXYNOS5=y
-CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1"
+CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=8
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

include/samsung/exynos5-dt-types.h +2 -0

index 8e11af30d1..8fe08fe211 100644
@@ -9,6 +9,7 @@ enum {
 	EXYNOS5_BOARD_ODROID_XU3_REV02,
 	EXYNOS5_BOARD_ODROID_XU4_REV01,
 	EXYNOS5_BOARD_ODROID_HC1_REV01,
+	EXYNOS5_BOARD_ODROID_HC2_REV01,
 	EXYNOS5_BOARD_ODROID_UNKNOWN,
 
 	EXYNOS5_BOARD_COUNT,

@@ -25,5 +26,6 @@ bool board_is_generic(void);
 bool board_is_odroidxu3(void);
 bool board_is_odroidxu4(void);
 bool board_is_odroidhc1(void);
+bool board_is_odroidhc2(void);
 
 #endif

Signature · 1 line

2.17.1

Minkyu Kang

2018-10-22 10:16 UTC #5 lore raw

PATCH 1/1 ARM: Samsung: Add Exynos5422-based Odroid HC2 support

Dear Dirk Meul,

Quoted 5 lines · Dirk Meul

Odroid HC2 board is based on Odroid XU4 board, like the Odroid HC1.
The linux kernel does not provide a hc2 DTB so the hc1 DTB is also used for the Odroid HC2.

Quoted 8 lines

Signed-off-by Dirk Meul <[email protected]>

---
 board/samsung/common/exynos5-dt-types.c | 16 +++++++++++++---
 board/samsung/common/exynos5-dt.c       |  4 ++--
 configs/odroid-xu3_defconfig            |  2 +-
 include/samsung/exynos5-dt-types.h      |  2 ++
 4 files changed, 18 insertions(+), 6 deletions(-)

Please send a v2 patch.

Thanks,
Minkyu Kang.