Misc Quorum fixes

PATCH Applied Alberto Garcia 2 participants 8 messages Oct 17, 2018 Block layer

lore

Share & tools

lore

Alberto Garcia

author

2018-10-17 14:34 UTC #0 lore raw

cover Misc Quorum fixes

Hi,

Here's a couple of small fixes for the Quorum driver plus new test cases. See the individual patches for details.

Regards,

Berto

Alberto Garcia (3):
quorum: Remove quorum_err()
quorum: Return an error if the blkverify mode has invalid settings
iotest: Test the blkverify mode of the Quorum driver

 block/quorum.c             | 37 +++++++++++--------------------------
 tests/qemu-iotests/081     | 30 ++++++++++++++++++++++++++++++
 tests/qemu-iotests/081.out | 16 ++++++++++++++++
 3 files changed, 57 insertions(+), 26 deletions(-)

Signature · 1 line

2.11.0

Alberto Garcia

author

2018-10-17 14:34 UTC #1 lore raw

PATCH 1/3 quorum: Remove quorum_err()

This is a static function with only one caller, so there's no need to keep it. Inlining the code in quorum_compare() makes it much simpler.

Signed-off-by Alberto Garcia <[email protected]>

Reported-by Markus Armbruster <[email protected]>

---
 block/quorum.c | 24 +++++-------------------
 1 file changed, 5 insertions(+), 19 deletions(-)

block/quorum.c +5 ~~-19~~

index eb526cc0f1..b1b777baef 100644
@@ -437,23 +437,7 @@ static bool quorum_iovec_compare(QEMUIOVector *a, QEMUIOVector *b)
     return true;
 }
 
-static void GCC_FMT_ATTR(2, 3) quorum_err(QuorumAIOCB *acb,
-                                          const char *fmt, ...)
-{
-    va_list ap;
-
-    va_start(ap, fmt);
-    fprintf(stderr, "quorum: offset=%" PRIu64 " bytes=%" PRIu64 " ",
-            acb->offset, acb->bytes);
-    vfprintf(stderr, fmt, ap);
-    fprintf(stderr, "\n");
-    va_end(ap);
-    exit(1);
-}
-
-static bool quorum_compare(QuorumAIOCB *acb,
-                           QEMUIOVector *a,
-                           QEMUIOVector *b)
+static bool quorum_compare(QuorumAIOCB *acb, QEMUIOVector *a, QEMUIOVector *b)
 {
     BDRVQuorumState *s = acb->bs->opaque;
     ssize_t offset;

@@ -462,8 +446,10 @@ static bool quorum_compare(QuorumAIOCB *acb,
     if (s->is_blkverify) {
         offset = qemu_iovec_compare(a, b);
         if (offset != -1) {
-            quorum_err(acb, "contents mismatch at offset %" PRIu64,
-                       acb->offset + offset);
+            fprintf(stderr, "quorum: offset=%" PRIu64 " bytes=%" PRIu64
+                    " contents mismatch at offset %" PRIu64 "\n",
+                    acb->offset, acb->bytes, acb->offset + offset);
+            exit(1);
         }
         return true;
     }

Signature · 1 line

2.11.0

Alberto Garcia

author

2018-10-17 14:34 UTC #2 lore raw

PATCH 2/3 quorum: Return an error if the blkverify mode has invalid settings

In reply to Alberto Garcia

The blkverify mode of Quorum can only be enabled if the number of children is exactly two and the value of vote-threshold is also two.

If the user tries to enable it but the other settings are incorrect then QEMU simply prints an error message to stderr and carries on disabling the blkverify setting.

This patch makes quorum_open() fail and return an error in this case.

Signed-off-by Alberto Garcia <[email protected]>

Reported-by Markus Armbruster <[email protected]>

---
 block/quorum.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

block/quorum.c +6 -7

index b1b777baef..6188ff6666 100644
@@ -912,13 +912,12 @@ static int quorum_open(BlockDriverState *bs, QDict *options, int flags,
     s->read_pattern = ret;
 
     if (s->read_pattern == QUORUM_READ_PATTERN_QUORUM) {
-        /* is the driver in blkverify mode */
-        if (qemu_opt_get_bool(opts, QUORUM_OPT_BLKVERIFY, false) &&
-            s->num_children == 2 && s->threshold == 2) {
-            s->is_blkverify = true;
-        } else if (qemu_opt_get_bool(opts, QUORUM_OPT_BLKVERIFY, false)) {
-            fprintf(stderr, "blkverify mode is set by setting blkverify=on "
-                    "and using two files with vote_threshold=2\n");
+        s->is_blkverify = qemu_opt_get_bool(opts, QUORUM_OPT_BLKVERIFY, false);
+        if (s->is_blkverify && (s->num_children != 2 || s->threshold != 2)) {
+            error_setg(&local_err, "blkverify=on can only be set if there are "
+                       "exactly two files and vote-threshold is 2");
+            ret = -EINVAL;
+            goto exit;
         }
 
         s->rewrite_corrupted = qemu_opt_get_bool(opts, QUORUM_OPT_REWRITE,

Signature · 1 line

2.11.0

Kevin Wolf

2018-10-17 15:31 UTC #3 lore raw

Re: [Qemu-devel] [PATCH 2/3] quorum: Return an error if the blkverify mode has invalid settings

Am 17.10.2018 um 16:33 hat Alberto Garcia geschrieben:

Quoted 11 lines

The blkverify mode of Quorum can only be enabled if the number of children is exactly two and the value of vote-threshold is also two.
If the user tries to enable it but the other settings are incorrect then QEMU simply prints an error message to stderr and carries on disabling the blkverify setting.
This patch makes quorum_open() fail and return an error in this case.
Signed-off-by Alberto Garcia <[email protected]>
Reported-by Markus Armbruster <[email protected]>

While reviewing this, I think I found another problem: Shouldn't .bdrv_add_child refuse to add a child if s->is_blkverify == true? (And probably assert in .bdrv_del_child that s->is_blkverify == false after checking s->num_children <= s->threshold)

Kevin

Alberto Garcia

author

2018-10-17 15:34 UTC #4 lore raw

Re: [Qemu-devel] [PATCH 2/3] quorum: Return an error if the blkverify mode has invalid settings

Quoted 10 lines · Kevin Wolf

Am 17.10.2018 um 16:33 hat Alberto Garcia geschrieben:
Quoted 9 lines
The blkverify mode of Quorum can only be enabled if the number of children is exactly two and the value of vote-threshold is also two.
If the user tries to enable it but the other settings are incorrect then QEMU simply prints an error message to stderr and carries on disabling the blkverify setting.
This patch makes quorum_open() fail and return an error in this case.

Quoted 7 lines

Quoted 2 lines
Signed-off-by Alberto Garcia <[email protected]>
Reported-by Markus Armbruster <[email protected]>
While reviewing this, I think I found another problem: Shouldn't .bdrv_add_child refuse to add a child if s->is_blkverify == true? (And probably assert in .bdrv_del_child that s->is_blkverify == false after checking s->num_children <= s->threshold)

I think you're right. Do you want me to send this in a later patch or do you prefer that I make it part of this series?

Berto

Kevin Wolf

2018-10-17 15:45 UTC #5 lore raw

Re: [Qemu-devel] [PATCH 2/3] quorum: Return an error if the blkverify mode has invalid settings

Am 17.10.2018 um 17:34 hat Alberto Garcia geschrieben:

Quoted 14 lines · Kevin Wolf

Quoted 13 lines
Am 17.10.2018 um 16:33 hat Alberto Garcia geschrieben:
Quoted 11 lines
The blkverify mode of Quorum can only be enabled if the number of children is exactly two and the value of vote-threshold is also two.
If the user tries to enable it but the other settings are incorrect then QEMU simply prints an error message to stderr and carries on disabling the blkverify setting.
This patch makes quorum_open() fail and return an error in this case.
Signed-off-by Alberto Garcia <[email protected]>
Reported-by Markus Armbruster <[email protected]>

Quoted 7 lines

Quoted 4 lines
While reviewing this, I think I found another problem: Shouldn't .bdrv_add_child refuse to add a child if s->is_blkverify == true? (And probably assert in .bdrv_del_child that s->is_blkverify == false after checking s->num_children <= s->threshold)
I think you're right. Do you want me to send this in a later patch or do you prefer that I make it part of this series?

This series looked good, so no need to respin. A separate patch is fine.

Kevin

Alberto Garcia

author

2018-10-17 14:34 UTC #6 lore raw

PATCH 3/3 iotest: Test the blkverify mode of the Quorum driver

In reply to Alberto Garcia

Signed-off-by Alberto Garcia <[email protected]>

---
 tests/qemu-iotests/081     | 30 ++++++++++++++++++++++++++++++
 tests/qemu-iotests/081.out | 16 ++++++++++++++++
 2 files changed, 46 insertions(+)

tests/qemu-iotests/081 +30 -0

index da3fb0984b..0ea010afbf 100755
@@ -168,6 +168,36 @@ echo "== checking that quorum is broken =="
 
 $QEMU_IO -c "open -o $quorum" -c "read -P 0x32 0 $size" | _filter_qemu_io
 
+echo
+echo "== checking the blkverify mode with broken content =="
+
+quorum="driver=raw,file.driver=quorum,file.vote-threshold=2,file.blkverify=on"
+quorum="$quorum,file.children.0.file.filename=$TEST_DIR/1.raw"
+quorum="$quorum,file.children.1.file.filename=$TEST_DIR/2.raw"
+quorum="$quorum,file.children.0.driver=raw"
+quorum="$quorum,file.children.1.driver=raw"
+
+$QEMU_IO -c "open -o $quorum" -c "read -P 0x32 0 $size" | _filter_qemu_io
+
+echo
+echo "== writing the same data to both files =="
+
+$QEMU_IO -c "write -P 0x32 0 $size" "$TEST_DIR/1.raw" | _filter_qemu_io
+$QEMU_IO -c "write -P 0x32 0 $size" "$TEST_DIR/2.raw" | _filter_qemu_io
+
+echo
+echo "== checking the blkverify mode with valid content =="
+
+$QEMU_IO -c "open -o $quorum" -c "read -P 0x32 0 $size" | _filter_qemu_io
+
+echo
+echo "== checking the blkverify mode with invalid settings =="
+
+quorum="$quorum,file.children.2.file.filename=$TEST_DIR/3.raw"
+quorum="$quorum,file.children.2.driver=raw"
+
+$QEMU_IO -c "open -o $quorum" | _filter_qemu_io
+
 # success, all done
 echo "*** done"
 rm -f $seq.full

tests/qemu-iotests/081.out +16 -0

index 2533c31c78..2f12c890e9 100644
@@ -55,4 +55,20 @@ wrote 10485760/10485760 bytes at offset 0
 
 == checking that quorum is broken ==
 read failed: Input/output error
+
+== checking the blkverify mode with broken content ==
+quorum: offset=0 bytes=10485760 contents mismatch at offset 0
+
+== writing the same data to both files ==
+wrote 10485760/10485760 bytes at offset 0
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 10485760/10485760 bytes at offset 0
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== checking the blkverify mode with valid content ==
+read 10485760/10485760 bytes at offset 0
+10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== checking the blkverify mode with invalid settings ==
+can't open: blkverify=on can only be set if there are exactly two files and vote-threshold is 2
 *** done

Signature · 1 line

2.11.0

Kevin Wolf

Applied

2018-10-17 15:33 UTC #7 lore raw

In reply to Alberto Garcia

Am 17.10.2018 um 16:33 hat Alberto Garcia geschrieben:

Quoted 4 lines

Hi,
Here's a couple of small fixes for the Quorum driver plus new test cases. See the individual patches for details.

Thanks, applied to the block branch.

Kevin