emdk->emsdp: Rename board
PATCH 1/1 emdk->emsdp: Rename board
Real marketing name of the board was recently updated so to accommodate that change renaming the board and all related to it.
Signed-off-by Alexey Brodkin <[email protected]>
---
arch/arc/Kconfig | 6 +++---
arch/arc/dts/Makefile | 2 +-
arch/arc/dts/{emdk.dts => emsdp.dts} | 2 +-
board/synopsys/{emdk => emsdp}/Kconfig | 6 +++---
board/synopsys/{emdk => emsdp}/MAINTAINERS | 5 +++--
board/synopsys/{emdk => emsdp}/Makefile | 2 +-
board/synopsys/{emdk => emsdp}/README | 11 ++++++-----
board/synopsys/{emdk/emdk.c => emsdp/emsdp.c} | 18 +++++++++---------
configs/{emdk_defconfig => emsdp_defconfig} | 6 +++---
include/configs/{emdk.h => emsdp.h} | 10 +++++-----
10 files changed, 35 insertions(+), 33 deletions(-)
rename arch/arc/dts/{emdk.dts => emsdp.dts} (96%)
rename board/synopsys/{emdk => emsdp}/Kconfig (63%)
rename board/synopsys/{emdk => emsdp}/MAINTAINERS (50%)
rename board/synopsys/{emdk => emsdp}/Makefile (85%)
rename board/synopsys/{emdk => emsdp}/README (90%)
rename board/synopsys/{emdk/emdk.c => emsdp/emsdp.c} (77%)
rename configs/{emdk_defconfig => emsdp_defconfig} (88%)
rename include/configs/{emdk.h => emsdp.h} (85%)arch/arc/Kconfig +3 -3
@@ -150,8 +150,8 @@ config TARGET_AXS101 config TARGET_AXS103 bool "Support Synopsys Designware SDP board AXS103" -config TARGET_EMDK - bool "Synopsys EM Development kit" +config TARGET_EMSDP + bool "Synopsys EM Software Development Platform" select CPU_ARCEM6 config TARGET_HSDK
@@ -166,7 +166,7 @@ endchoice source "board/abilis/tb100/Kconfig" source "board/synopsys/Kconfig" source "board/synopsys/axs10x/Kconfig" -source "board/synopsys/emdk/Kconfig" +source "board/synopsys/emsdp/Kconfig" source "board/synopsys/hsdk/Kconfig" source "board/synopsys/iot_devkit/Kconfig"
arch/arc/dts/Makefile +1 -1
@@ -4,7 +4,7 @@ dtb-$(CONFIG_TARGET_AXS101) += axs101.dtb dtb-$(CONFIG_TARGET_AXS103) += axs103.dtb dtb-$(CONFIG_TARGET_NSIM) += nsim.dtb dtb-$(CONFIG_TARGET_TB100) += abilis_tb100.dtb -dtb-$(CONFIG_TARGET_EMDK) += emdk.dtb +dtb-$(CONFIG_TARGET_EMSDP) += emsdp.dtb dtb-$(CONFIG_TARGET_HSDK) += hsdk.dtb dtb-$(CONFIG_TARGET_IOT_DEVKIT) += iot_devkit.dtb
arch/arc/dts/emsdp.dts renamed from arch/arc/dts/emdk.dts +1 -1
@@ -7,7 +7,7 @@ #include "skeleton.dtsi" / { - model = "snps,emdk"; + model = "snps,emsdp"; #address-cells = <1>; #size-cells = <1>;
board/synopsys/emsdp/Kconfig renamed from board/synopsys/emdk/Kconfig +3 -3
@@ -1,12 +1,12 @@ -if TARGET_EMDK +if TARGET_EMSDP config SYS_BOARD - default "emdk" + default "emsdp" config SYS_VENDOR default "synopsys" config SYS_CONFIG_NAME - default "emdk" + default "emsdp" endif
board/synopsys/emsdp/MAINTAINERS renamed from board/synopsys/emdk/MAINTAINERS +3 -2
@@ -1,5 +1,6 @@ EM DEVELOPMENT KIT BOARD M: Alexey Brodkin <[email protected]> S: Maintained -F: board/synopsys/emdk/ -F: configs/emdk_defconfig +F: arch/arc/dts/emsdp.dts +F: board/synopsys/emsdp/ +F: configs/emsdp_defconfig
board/synopsys/emsdp/Makefile renamed from board/synopsys/emdk/Makefile +1 -1
@@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += emdk.o +obj-y += emsdp.o
board/synopsys/emsdp/README renamed from board/synopsys/emdk/README +6 -5
@@ -1,11 +1,12 @@ ================================================================================ -Useful notes on bulding and using of U-Boot on ARC EM Development Kit (AKA EMDK) +Useful notes on bulding and using of U-Boot on +ARC EM Software Development Platform (AKA EMSDP) ================================================================================ BOARD OVERVIEW - The DesignWare ARC EM Development Kit is FPGA-bases platform for rapid - software development on the ARC EM family of processors. + The DesignWare ARC EM Software Development Platform is FPGA-bases platform + for rapid software development on the ARC EM family of processors. Since this board is based on FPGA it's possible to load and use different versions of ARC EM CPUs. U-Boot is built to be run on the simplest
@@ -50,7 +51,7 @@ Useful notes on bulding and using of U-Boot on ARC EM Development Kit (AKA EMDK) 1. Configure U-Boot: ------------------------->8---------------------- - make emdk_defconfig + make emsdp_defconfig ------------------------->8---------------------- 2. To build Elf file (for example to be used with host debugger via JTAG
@@ -69,7 +70,7 @@ Useful notes on bulding and using of U-Boot on ARC EM Development Kit (AKA EMDK) EXECUTING U-BOOT - 1. The EMDK board is supposed to auto-start U-Boot image stored in ROM on + 1. The EMSDP board is supposed to auto-start U-Boot image stored in ROM on power-on. For that make sure VCCIO DIP-switches are all in "off" state. 2. Though it is possible to load U-Boot as a simple Elf file via JTAG right
board/synopsys/emsdp/emsdp.c renamed from board/synopsys/emdk/emdk.c +9 -9
@@ -55,7 +55,7 @@ void reset_cpu(ulong addr) ;/* loop forever till reset */ } -static int do_emdk_rom (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) +static int do_emsdp_rom (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) {u32 creg_boot =readl ((u32 *)(CREG_BASE +CREG_BOOT_OFFSET ));
@@ -71,17 +71,17 @@ static int do_emdk_rom(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])return CMD_RET_SUCCESS ; } -cmd_tbl_t cmd_emdk[] = { -U_BOOT_CMD_MKENT (rom,2 ,0 , do_emdk_rom,"" ,"" ), +cmd_tbl_t cmd_emsdp[] = { +U_BOOT_CMD_MKENT (rom,2 ,0 , do_emsdp_rom,"" ,"" ), }; -static int do_emdk (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) +static int do_emsdp (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) {cmd_tbl_t *c; - c =find_cmd_tbl (argv[1 ], cmd_emdk,ARRAY_SIZE (cmd_emdk)); + c =find_cmd_tbl (argv[1 ], cmd_emsdp,ARRAY_SIZE (cmd_emsdp)); -/* Strip off leading 'emdk' command */ +/* Strip off leading 'emsdp' command */ argc--; argv++;
@@ -92,8 +92,8 @@ static int do_emdk(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) }U_BOOT_CMD ( - emdk,CONFIG_SYS_MAXARGS ,0 , do_emdk, -"Synopsys EMDK specific commands" , + emsdp,CONFIG_SYS_MAXARGS ,0 , do_emsdp, +"Synopsys EMSDP specific commands" ,"rom unlock - Unlock non-volatile memory for writing\n" -"emdk rom lock - Lock non-volatile memory to prevent writing\n" +"emsdp rom lock - Lock non-volatile memory to prevent writing\n" );
configs/emsdp_defconfig renamed from configs/emdk_defconfig +3 -3
@@ -1,13 +1,13 @@ CONFIG_ARC=y CONFIG_ISA_ARCV2=y CONFIG_CPU_ARCEM6=y -CONFIG_TARGET_EMDK=y +CONFIG_TARGET_EMSDP=y CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SYS_CLK_FREQ=40000000 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="emdk# " +CONFIG_SYS_PROMPT="emsdp# " # CONFIG_CMD_BOOTD is not set # CONFIG_CMD_XIMG is not set CONFIG_CMD_MMC=y
@@ -15,7 +15,7 @@ CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y -CONFIG_DEFAULT_DEVICE_TREE="emdk" +CONFIG_DEFAULT_DEVICE_TREE="emsdp" CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_FAT_INTERFACE="mmc" CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
include/configs/emsdp.h renamed from include/configs/emdk.h +5 -5
@@ -3,8 +3,8 @@* Copyright (C) 2018 Synopsys, Inc. All rights reserved. */ -#ifndef _CONFIG_EMDK_H_ -#define _CONFIG_EMDK_H_ +#ifndef _CONFIG_EMSDP_H_ +#define _CONFIG_EMSDP_H_#include <linux/sizes.h>
@@ -30,11 +30,11 @@#define CONFIG_EXTRA_ENV_SETTINGS \ "upgrade_image=u-boot.bin\0" \ - "upgrade=emdk rom unlock && " \ + "upgrade=emsdp rom unlock && " \ "fatload mmc 0 ${loadaddr} ${upgrade_image} && " \ "cp.b ${loadaddr} 0 ${filesize} && " \ "dcache flush && " \ - "emdk rom lock\0" + "emsdp rom lock\0" -#endif /* _CONFIG_EMDK_H_ */ +#endif /* _CONFIG_EMSDP_H_ */
Signature · 1 line
2.17.2