4.4.162-stable review

This is the start of the stable review cycle for the 4.4.162 release. There are 48 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat Oct 20 17:54:03 UTC 2018. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.162-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.162-rc1

Long Li <[email protected]>
HV: properly delay KVP packets when negotiation is in progress

Vitaly Kuznetsov <[email protected]>
Drivers: hv: kvp: fix IP Failover

K. Y. Srinivasan <[email protected]>
Drivers: hv: util: Pass the channel information during the init call

K. Y. Srinivasan <[email protected]>
Drivers: hv: utils: Invoke the poll function after handshake

Stephen Warren <[email protected]>
usb: gadget: serial: fix oops when data rx'd after close

Alexey Brodkin <[email protected]>
ARC: build: Get rid of toolchain check

Michael Neuling <[email protected]>
powerpc/tm: Avoid possible userspace r1 corruption on reclaim

Michael Neuling <[email protected]>
powerpc/tm: Fix userspace r13 corruption

James Cowgill <[email protected]>
RISC-V: include linux/ftrace.h in asm-prototypes.h

Nathan Chancellor <[email protected]>

    net/mlx4: Use cpumask_available for eq->affinity_mask

Michael Schmitz <[email protected]>
Input: atakbd - fix Atari CapsLock behaviour

Andreas Schwab <[email protected]>
Input: atakbd - fix Atari keymap

Keerthy <[email protected]>
clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs

Jozef Balga <[email protected]>
media: af9035: prevent buffer overflow on write

Andy Lutomirski <[email protected]>
x86/fpu: Finish excising 'eagerfpu'

Rik van Riel <[email protected]>
x86/fpu: Remove struct fpu::counter

Andy Lutomirski <[email protected]>

    x86/fpu: Remove use_eager_fpu()

Paolo Bonzini <[email protected]>
KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch

Eric Dumazet <[email protected]>
rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096

Florian Fainelli <[email protected]>
net: systemport: Fix wake-up interrupt race during resume

Maxime Chevallier <[email protected]>
net: mvpp2: Extract the correct ethtype from the skb for tx csum offload

Ido Schimmel <[email protected]>
team: Forbid enslaving team device to itself

Shahed Shaikh <[email protected]>
qlcnic: fix Tx descriptor corruption on 82xx devices

Yu Zhao <[email protected]>
net/usb: cancel pending work when unbinding smsc75xx

Sean Tranchetti <[email protected]>
netlabel: check for IPV4MASK in addrinfo_get

Jeff Barnhill <[email protected]>
net/ipv6: Display all addresses in output of /proc/net/if_inet6

Sabrina Dubroca <[email protected]>
net: ipv4: update fnhe_pmtu when first hop's MTU changes

Eric Dumazet <[email protected]>
ipv4: fix use-after-free in ip_cmsg_recv_dstaddr()

Paolo Abeni <[email protected]>
ip_tunnel: be careful when accessing the inner header

Paolo Abeni <[email protected]>
ip6_tunnel: be careful when accessing the inner header

Mahesh Bandewar <[email protected]>
bonding: avoid possible dead-lock

Michael Chan <[email protected]>
bnxt_en: Fix TX timeout during netpoll.

Hou Tao <[email protected]>
jffs2: return -ERANGE when xattr buffer is too small

Mathias Nyman <[email protected]>
xhci: Don't print a warning when setting link state for disabled ports

Edgar Cherkasov <[email protected]>
i2c: i2c-scmi: fix for i2c_smbus_write_block_data

Adrian Hunter <[email protected]>
perf script python: Fix export-to-postgresql.py occasional failure

Mikulas Patocka <[email protected]>
mach64: detect the dot clock divider correctly on sparc

Jann Horn <[email protected]>
mm/vmstat.c: fix outdated vmstat_text

Theodore Ts'o <[email protected]>
ext4: add corruption check in ext4_xattr_set_entry()

Amber Lin <[email protected]>
drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7

Nicolas Ferre <[email protected]>
ARM: dts: at91: add new compatibility string for macb on sama5d3

Nicolas Ferre <[email protected]>
net: macb: disable scatter-gather for macb on sama5d3

Jongsung Kim <[email protected]>
stmmac: fix valid numbers of unicast filter entries

Yu Zhao <[email protected]>
sound: enable interrupt after dma buffer initialization

Tony Lindgren <[email protected]>
mfd: omap-usb-host: Fix dts probe of children

Lei Yang <[email protected]>
selftests/efivarfs: add required kernel configs

Danny Smith <[email protected]>
ASoC: sigmadsp: safeload should not have lower byte limit

Pierre-Louis Bossart <[email protected]>
ASoC: wm8804: Add ACPI support

-------------

Diffstat:

 Documentation/devicetree/bindings/net/macb.txt     |  1 +
 Documentation/kernel-parameters.txt                |  5 --
 Makefile                                           |  4 +-
 arch/arc/Makefile                                  | 14 ----
 arch/arm/boot/dts/sama5d3_emac.dtsi                |  2 +-
 arch/powerpc/kernel/tm.S                           | 20 +++++-
 arch/riscv/include/asm/asm-prototypes.h            |  7 ++
 arch/x86/crypto/crc32c-intel_glue.c                | 17 ++---
 arch/x86/include/asm/cpufeatures.h                 |  1 -
 arch/x86/include/asm/fpu/internal.h                | 37 +----------
 arch/x86/include/asm/fpu/types.h                   | 34 ----------
 arch/x86/include/asm/kvm_host.h                    |  1 -
 arch/x86/kernel/fpu/core.c                         | 41 ++----------
 arch/x86/kernel/fpu/signal.c                       |  8 +--
 arch/x86/kvm/cpuid.c                               |  5 +-
 arch/x86/kvm/x86.c                                 | 10 ---
 drivers/clocksource/timer-ti-32k.c                 |  3 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c  |  2 +-
 drivers/hv/hv_fcopy.c                              |  2 +-
 drivers/hv/hv_kvp.c                                | 40 +++++++++++-
 drivers/hv/hv_snapshot.c                           |  4 +-
 drivers/hv/hv_util.c                               |  1 +
 drivers/hv/hyperv_vmbus.h                          |  5 ++
 drivers/i2c/busses/i2c-scmi.c                      |  1 +
 drivers/input/keyboard/atakbd.c                    | 74 ++++++++--------------
 drivers/media/usb/dvb-usb-v2/af9035.c              |  6 +-
 drivers/mfd/omap-usb-host.c                        | 11 ++--
 drivers/net/bonding/bond_main.c                    | 43 +++++--------
 drivers/net/ethernet/broadcom/bcmsysport.c         | 22 +++----
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          | 13 +++-
 drivers/net/ethernet/cadence/macb.c                |  8 +++
 drivers/net/ethernet/marvell/mvpp2.c               | 10 +--
 drivers/net/ethernet/mellanox/mlx4/eq.c            |  3 +-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h        |  8 ++-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |  3 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h    |  3 +-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h     |  3 +-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c     | 12 ++--
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |  5 +-
 drivers/net/team/team.c                            |  5 ++
 drivers/net/usb/smsc75xx.c                         |  1 +
 drivers/usb/gadget/function/u_serial.c             |  2 +-
 drivers/usb/host/xhci-hub.c                        | 18 +++---
 drivers/video/fbdev/aty/atyfb.h                    |  3 +-
 drivers/video/fbdev/aty/atyfb_base.c               |  7 +-
 drivers/video/fbdev/aty/mach64_ct.c                | 10 +--
 fs/ext4/xattr.c                                    | 22 ++++---
 fs/jffs2/xattr.c                                   |  6 +-
 include/linux/hyperv.h                             |  1 +
 include/linux/netdevice.h                          |  7 ++
 include/net/bonding.h                              |  7 +-
 include/net/ip_fib.h                               |  1 +
 mm/vmstat.c                                        |  1 -
 net/core/dev.c                                     | 28 +++++++-
 net/core/rtnetlink.c                               |  6 ++
 net/ipv4/fib_frontend.c                            | 12 ++--
 net/ipv4/fib_semantics.c                           | 50 +++++++++++++++
 net/ipv4/ip_sockglue.c                             |  3 +-
 net/ipv4/ip_tunnel.c                               |  9 +++
 net/ipv6/addrconf.c                                |  4 +-
 net/ipv6/ip6_tunnel.c                              | 13 +++-
 net/netlabel/netlabel_unlabeled.c                  |  3 +-
 sound/hda/hdac_controller.c                        |  8 ++-
 sound/soc/codecs/sigmadsp.c                        |  3 +-
 sound/soc/codecs/wm8804-i2c.c                      | 15 ++++-
 tools/perf/scripts/python/export-to-postgresql.py  |  9 +++
 tools/testing/selftests/efivarfs/config            |  1 +
 67 files changed, 404 insertions(+), 340 deletions(-)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <[email protected]>

[ Upstream commit 960cdd50ca9fdfeb82c2757107bcb7f93c8d7d41 ]

HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier.

This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform.

The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays.

---
 sound/soc/codecs/wm8804-i2c.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
+#include <linux/acpi.h>
 
 #include "wm8804.h"
 

@@ -40,17 +41,29 @@ static const struct i2c_device_id wm8804
 };
 MODULE_DEVICE_TABLE(i2c, wm8804_i2c_id);
 
+#if defined(CONFIG_OF)
 static const struct of_device_id wm8804_of_match[] = {
 	{ .compatible = "wlf,wm8804", },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, wm8804_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id wm8804_acpi_match[] = {
+	{ "1AEC8804", 0 }, /* Wolfson PCI ID + part ID */
+	{ "10138804", 0 }, /* Cirrus Logic PCI ID + part ID */
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, wm8804_acpi_match);
+#endif
 
 static struct i2c_driver wm8804_i2c_driver = {
 	.driver = {
 		.name = "wm8804",
 		.pm = &wm8804_pm,
-		.of_match_table = wm8804_of_match,
+		.of_match_table = of_match_ptr(wm8804_of_match),
+		.acpi_match_table = ACPI_PTR(wm8804_acpi_match),
 	},
 	.probe = wm8804_i2c_probe,
 	.remove = wm8804_i2c_remove,

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Danny Smith <[email protected]>

[ Upstream commit 5ea752c6efdf5aa8a57aed816d453a8f479f1b0a ]

Fixed range in safeload conditional to allow safeload to up to 20 bytes, without a lower limit.

---
 sound/soc/codecs/sigmadsp.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

@@ -117,8 +117,7 @@ static int sigmadsp_ctrl_write(struct si
 	struct sigmadsp_control *ctrl, void *data)
 {
 	/* safeload loads up to 20 bytes in a atomic operation */
-	if (ctrl->num_bytes > 4 && ctrl->num_bytes <= 20 && sigmadsp->ops &&
-	    sigmadsp->ops->safeload)
+	if (ctrl->num_bytes <= 20 && sigmadsp->ops && sigmadsp->ops->safeload)
 		return sigmadsp->ops->safeload(sigmadsp, ctrl->addr, data,
 			ctrl->num_bytes);
 	else

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lei Yang <[email protected]>

[ Upstream commit 53cf59d6c0ad3edc4f4449098706a8f8986258b6 ]

add config file

---
 tools/testing/selftests/efivarfs/config |    1 +
 1 file changed, 1 insertion(+)
 create mode 100644 tools/testing/selftests/efivarfs/config

@@ -0,0 +1 @@
+CONFIG_EFIVAR_FS=y

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <[email protected]>

[ Upstream commit 10492ee8ed9188d6d420e1f79b2b9bdbc0624e65 ]

It currently only works if the parent bus uses "simple-bus". We currently try to probe children with non-existing compatible values. And we're missing .probe.

I noticed this while testing devices configured to probe using ti-sysc interconnect target module driver. For that we also may want to rebind the driver, so let's remove __init and __exit.

---
 drivers/mfd/omap-usb-host.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

@@ -548,8 +548,8 @@ static int usbhs_omap_get_dt_pdata(struc
 }
 
 static const struct of_device_id usbhs_child_match_table[] = {
-	{ .compatible = "ti,omap-ehci", },
-	{ .compatible = "ti,omap-ohci", },
+	{ .compatible = "ti,ehci-omap", },
+	{ .compatible = "ti,ohci-omap3", },
 	{ }
 };
 

@@ -875,6 +875,7 @@ static struct platform_driver usbhs_omap
 		.pm		= &usbhsomap_dev_pm_ops,
 		.of_match_table = usbhs_omap_dt_ids,
 	},
+	.probe		= usbhs_omap_probe,
 	.remove		= usbhs_omap_remove,
 };
 

@@ -884,9 +885,9 @@ MODULE_ALIAS("platform:" USBHS_DRIVER_NA
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
 
-static int __init omap_usbhs_drvinit(void)
+static int omap_usbhs_drvinit(void)
 {
-	return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
+	return platform_driver_register(&usbhs_omap_driver);
 }
 
 /*

@@ -898,7 +899,7 @@ static int __init omap_usbhs_drvinit(voi
  */
 fs_initcall_sync(omap_usbhs_drvinit);
 
-static void __exit omap_usbhs_drvexit(void)
+static void omap_usbhs_drvexit(void)
 {
 	platform_driver_unregister(&usbhs_omap_driver);
 }

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yu Zhao <[email protected]>

[ Upstream commit b61749a89f826eb61fc59794d9e4697bd246eb61 ]

In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in.

Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization.

---
 sound/hda/hdac_controller.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

@@ -40,6 +40,8 @@ static void azx_clear_corbrp(struct hdac
  */
 void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
 {
+	WARN_ON_ONCE(!bus->rb.area);
+
 	spin_lock_irq(&bus->reg_lock);
 	/* CORB set up */
 	bus->corb.addr = bus->rb.addr;

@@ -377,13 +379,15 @@ bool snd_hdac_bus_init_chip(struct hdac_
 	/* reset controller */
 	azx_reset(bus, full_reset);
 
-	/* initialize interrupts */
+	/* clear interrupts */
 	azx_int_clear(bus);
-	azx_int_enable(bus);
 
 	/* initialize the codec command I/O */
 	snd_hdac_bus_init_cmd_io(bus);
 
+	/* enable interrupts after CORB/RIRB buffers are initialized above */
+	azx_int_enable(bus);
+
 	/* program the position buffer */
 	if (bus->use_posbuf && bus->posbuf.addr) {
 		snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jongsung Kim <[email protected]>

[ Upstream commit edf2ef7242805e53ec2e0841db26e06d8bc7da70 ]

Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or 128 unicast filter entries. (Table 7-8 MAC Address Registers from databook) Fix dwmac1000_validate_ucast_entries() to accept values between 1 and 32 in addition.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

@@ -71,7 +71,7 @@ static int dwmac1000_validate_mcast_bins
  * Description:
  * This function validates the number of Unicast address entries supported
  * by a particular Synopsys 10/100/1000 controller. The Synopsys controller
- * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter
+ * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter
  * logic. This function validates a valid, supported configuration is
  * selected, and defaults to 1 Unicast address if an unsupported
  * configuration is selected.

@@ -81,8 +81,7 @@ static int dwmac1000_validate_ucast_entr
 	int x = ucast_entries;
 
 	switch (x) {
-	case 1:
-	case 32:
+	case 1 ... 32:
 	case 64:
 	case 128:
 		break;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Ferre <[email protected]>

[ Upstream commit eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 ]

Create a new configuration for the sama5d3-macb new compatibility string. This configuration disables scatter-gather because we experienced lock down of the macb interface of this particular SoC under very high load.

---
 drivers/net/ethernet/cadence/macb.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -2743,6 +2743,13 @@ static const struct macb_config at91sam9
 	.init = macb_init,
 };
 
+static const struct macb_config sama5d3macb_config = {
+	.caps = MACB_CAPS_SG_DISABLED
+	      | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
+	.clk_init = macb_clk_init,
+	.init = macb_init,
+};
+
 static const struct macb_config pc302gem_config = {
 	.caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE,
 	.dma_burst_length = 16,

@@ -2801,6 +2808,7 @@ static const struct of_device_id macb_dt
 	{ .compatible = "cdns,gem", .data = &pc302gem_config },
 	{ .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config },
 	{ .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config },
+	{ .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config },
 	{ .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config },
 	{ .compatible = "cdns,at91rm9200-emac", .data = &emac_config },
 	{ .compatible = "cdns,emac", .data = &emac_config },

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Ferre <[email protected]>

[ Upstream commit 321cc359d899a8e988f3725d87c18a628e1cc624 ]

We need this new compatibility string as we experienced different behavior for this 10/100Mbits/s macb interface on this particular SoC. Backward compatibility is preserved as we keep the alternative strings.

---
 Documentation/devicetree/bindings/net/macb.txt |    1 +
 arch/arm/boot/dts/sama5d3_emac.dtsi            |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

@@ -8,6 +8,7 @@ Required properties:
   Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
   the Cadence GEM, or the generic form: "cdns,gem".
   Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
+  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
   Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
   Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.

@@ -41,7 +41,7 @@
 			};
 
 			macb1: ethernet@f802c000 {
-				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Amber Lin <[email protected]>

[ Upstream commit caaa4c8a6be2a275bd14f2369ee364978ff74704 ]

A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -504,7 +504,7 @@ static int kgd_hqd_sdma_destroy(struct k
 
 	while (true) {
 		temp = RREG32(sdma_base_addr + mmSDMA0_RLC0_CONTEXT_STATUS);
-		if (temp & SDMA0_STATUS_REG__RB_CMD_IDLE__SHIFT)
+		if (temp & SDMA0_RLC0_CONTEXT_STATUS__IDLE_MASK)
 			break;
 		if (timeout == 0)
 			return -ETIME;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <[email protected]>

commit 5369a762c882c0b6e9599e4ebbb3a9ba9eee7e2d upstream.

In theory this should have been caught earlier when the xattr list was verified, but in case it got missed, it's simple enough to add check to make sure we don't overrun the xattr buffer.

This addresses CVE-2018-10879.

https://bugzilla.kernel.org/show_bug.cgi?id=200001

[bwh: Backported to 3.16:
- Add inode parameter to ext4_xattr_set_entry() and update callers
- Adjust context]

---
 fs/ext4/xattr.c |   22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

@@ -638,14 +638,20 @@ static size_t ext4_xattr_free_space(stru
 }
 
 static int
-ext4_xattr_set_entry(struct ext4_xattr_info *i, struct ext4_xattr_search *s)
+ext4_xattr_set_entry(struct ext4_xattr_info *i, struct ext4_xattr_search *s,
+		     struct inode *inode)
 {
-	struct ext4_xattr_entry *last;
+	struct ext4_xattr_entry *last, *next;
 	size_t free, min_offs = s->end - s->base, name_len = strlen(i->name);
 
 	/* Compute min_offs and last. */
 	last = s->first;
-	for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
+	for (; !IS_LAST_ENTRY(last); last = next) {
+		next = EXT4_XATTR_NEXT(last);
+		if ((void *)next >= s->end) {
+			EXT4_ERROR_INODE(inode, "corrupted xattr entries");
+			return -EFSCORRUPTED;
+		}
 		if (!last->e_value_block && last->e_value_size) {
 			size_t offs = le16_to_cpu(last->e_value_offs);
 			if (offs < min_offs)

@@ -825,7 +831,7 @@ ext4_xattr_block_set(handle_t *handle, s
 				ce = NULL;
 			}
 			ea_bdebug(bs->bh, "modifying in-place");
-			error = ext4_xattr_set_entry(i, s);
+			error = ext4_xattr_set_entry(i, s, inode);
 			if (!error) {
 				if (!IS_LAST_ENTRY(s->first))
 					ext4_xattr_rehash(header(s->base),

@@ -875,7 +881,7 @@ ext4_xattr_block_set(handle_t *handle, s
 		s->end = s->base + sb->s_blocksize;
 	}
 
-	error = ext4_xattr_set_entry(i, s);
+	error = ext4_xattr_set_entry(i, s, inode);
 	if (error == -EFSCORRUPTED)
 		goto bad_block;
 	if (error)

@@ -1037,7 +1043,7 @@ int ext4_xattr_ibody_inline_set(handle_t
 
 	if (EXT4_I(inode)->i_extra_isize == 0)
 		return -ENOSPC;
-	error = ext4_xattr_set_entry(i, s);
+	error = ext4_xattr_set_entry(i, s, inode);
 	if (error) {
 		if (error == -ENOSPC &&
 		    ext4_has_inline_data(inode)) {

@@ -1049,7 +1055,7 @@ int ext4_xattr_ibody_inline_set(handle_t
 			error = ext4_xattr_ibody_find(inode, i, is);
 			if (error)
 				return error;
-			error = ext4_xattr_set_entry(i, s);
+			error = ext4_xattr_set_entry(i, s, inode);
 		}
 		if (error)
 			return error;

@@ -1075,7 +1081,7 @@ static int ext4_xattr_ibody_set(handle_t
 
 	if (EXT4_I(inode)->i_extra_isize == 0)
 		return -ENOSPC;
-	error = ext4_xattr_set_entry(i, s);
+	error = ext4_xattr_set_entry(i, s, inode);
 	if (error)
 		return error;
 	header = IHDR(inode, ext4_raw_inode(&is->iloc));

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jann Horn <[email protected]>

commit 28e2c4bb99aa40f9d5f07ac130cbc4da0ea93079 upstream.

7a9cdebdcc17 ("mm: get rid of vmacache_flush_all() entirely") removed the VMACACHE_FULL_FLUSHES statistics, but didn't remove the corresponding entry in vmstat_text. This causes an out-of-bounds access in vmstat_show().

Luckily this only affects kernels with CONFIG_DEBUG_VM_VMACACHE=y, which is probably very rare.

---
 mm/vmstat.c |    1 -
 1 file changed, 1 deletion(-)

@@ -869,7 +869,6 @@ const char * const vmstat_text[] = {
 #ifdef CONFIG_DEBUG_VM_VMACACHE
 	"vmacache_find_calls",
 	"vmacache_find_hits",
-	"vmacache_full_flushes",
 #endif
 #endif /* CONFIG_VM_EVENTS_COUNTERS */
 };

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit 76ebebd2464c5c8a4453c98b6dbf9c95a599e810 upstream.

On Sun Ultra 5, it happens that the dot clock is not set up properly for some videomodes. For example, if we set the videomode "r1024x768x60" in the firmware, Linux would incorrectly set a videomode with refresh rate 180Hz when booting (suprisingly, my LCD monitor can display it, although display quality is very low).

The reason is this: Older mach64 cards set the divider in the register VCLK_POST_DIV. The register has four 2-bit fields (the field that is actually used is specified in the lowest two bits of the register CLOCK_CNTL). The 2 bits select divider "1, 2, 4, 8". On newer mach64 cards, there's another bit added - the top four bits of PLL_EXT_CNTL extend the divider selection, so we have possible dividers "1, 2, 4, 8, 3, 5, 6, 12". The Linux driver clears the top four bits of PLL_EXT_CNTL and never sets them, so it can work regardless if the card supports them. However, the sparc64 firmware may set these extended dividers during boot - and the mach64 driver detects incorrect dot clock in this case.

This patch makes the driver read the additional divider bit from PLL_EXT_CNTL and calculate the initial refresh rate properly.

---
 drivers/video/fbdev/aty/atyfb.h      |    3 ++-
 drivers/video/fbdev/aty/atyfb_base.c |    7 ++++---
 drivers/video/fbdev/aty/mach64_ct.c  |   10 +++++-----
 3 files changed, 11 insertions(+), 9 deletions(-)

@@ -332,6 +332,8 @@ extern const struct aty_pll_ops aty_pll_
 extern void aty_set_pll_ct(const struct fb_info *info, const union aty_pll *pll);
 extern u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par);
 
+extern const u8 aty_postdividers[8];
+
 
     /*
      *  Hardware cursor support

@@ -358,7 +360,6 @@ static inline void wait_for_idle(struct
 
 extern void aty_reset_engine(const struct atyfb_par *par);
 extern void aty_init_engine(struct atyfb_par *par, struct fb_info *info);
-extern u8   aty_ld_pll_ct(int offset, const struct atyfb_par *par);
 
 void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
 void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect);

@@ -3093,17 +3093,18 @@ static int atyfb_setup_sparc(struct pci_
 		/*
 		 * PLL Reference Divider M:
 		 */
-		M = pll_regs[2];
+		M = pll_regs[PLL_REF_DIV];
 
 		/*
 		 * PLL Feedback Divider N (Dependent on CLOCK_CNTL):
 		 */
-		N = pll_regs[7 + (clock_cntl & 3)];
+		N = pll_regs[VCLK0_FB_DIV + (clock_cntl & 3)];
 
 		/*
 		 * PLL Post Divider P (Dependent on CLOCK_CNTL):
 		 */
-		P = 1 << (pll_regs[6] >> ((clock_cntl & 3) << 1));
+		P = aty_postdividers[((pll_regs[VCLK_POST_DIV] >> ((clock_cntl & 3) << 1)) & 3) |
+		                     ((pll_regs[PLL_EXT_CNTL] >> (2 + (clock_cntl & 3))) & 4)];
 
 		/*
 		 * PLL Divider Q:

@@ -114,7 +114,7 @@ static void aty_st_pll_ct(int offset, u8
  */
 
 #define Maximum_DSP_PRECISION 7
-static u8 postdividers[] = {1,2,4,8,3};
+const u8 aty_postdividers[8] = {1,2,4,8,3,5,6,12};
 
 static int aty_dsp_gt(const struct fb_info *info, u32 bpp, struct pll_ct *pll)
 {

@@ -221,7 +221,7 @@ static int aty_valid_pll_ct(const struct
 		pll->vclk_post_div += (q <  64*8);
 		pll->vclk_post_div += (q <  32*8);
 	}
-	pll->vclk_post_div_real = postdividers[pll->vclk_post_div];
+	pll->vclk_post_div_real = aty_postdividers[pll->vclk_post_div];
 	//    pll->vclk_post_div <<= 6;
 	pll->vclk_fb_div = q * pll->vclk_post_div_real / 8;
 	pllvclk = (1000000 * 2 * pll->vclk_fb_div) /

@@ -512,7 +512,7 @@ static int aty_init_pll_ct(const struct
 		u8 mclk_fb_div, pll_ext_cntl;
 		pll->ct.pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par);
 		pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par);
-		pll->ct.xclk_post_div_real = postdividers[pll_ext_cntl & 0x07];
+		pll->ct.xclk_post_div_real = aty_postdividers[pll_ext_cntl & 0x07];
 		mclk_fb_div = aty_ld_pll_ct(MCLK_FB_DIV, par);
 		if (pll_ext_cntl & PLL_MFB_TIMES_4_2B)
 			mclk_fb_div <<= 1;

@@ -534,7 +534,7 @@ static int aty_init_pll_ct(const struct
 		xpost_div += (q <  64*8);
 		xpost_div += (q <  32*8);
 	}
-	pll->ct.xclk_post_div_real = postdividers[xpost_div];
+	pll->ct.xclk_post_div_real = aty_postdividers[xpost_div];
 	pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8;
 
 #ifdef CONFIG_PPC

@@ -583,7 +583,7 @@ static int aty_init_pll_ct(const struct
 			mpost_div += (q <  64*8);
 			mpost_div += (q <  32*8);
 		}
-		sclk_post_div_real = postdividers[mpost_div];
+		sclk_post_div_real = aty_postdividers[mpost_div];
 		pll->ct.sclk_fb_div = q * sclk_post_div_real / 8;
 		pll->ct.spll_cntl2 = mpost_div << 4;
 #ifdef DEBUG

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <[email protected]>

commit 25e11700b54c7b6b5ebfc4361981dae12299557b upstream.

Occasional export failures were found to be caused by truncating 64-bit pointers to 32-bits. Fix by explicitly setting types for all ctype arguments and results.

---
 tools/perf/scripts/python/export-to-postgresql.py |    9 +++++++++
 1 file changed, 9 insertions(+)

@@ -205,14 +205,23 @@ from ctypes import *
 libpq = CDLL("libpq.so.5")
 PQconnectdb = libpq.PQconnectdb
 PQconnectdb.restype = c_void_p
+PQconnectdb.argtypes = [ c_char_p ]
 PQfinish = libpq.PQfinish
+PQfinish.argtypes = [ c_void_p ]
 PQstatus = libpq.PQstatus
+PQstatus.restype = c_int
+PQstatus.argtypes = [ c_void_p ]
 PQexec = libpq.PQexec
 PQexec.restype = c_void_p
+PQexec.argtypes = [ c_void_p, c_char_p ]
 PQresultStatus = libpq.PQresultStatus
+PQresultStatus.restype = c_int
+PQresultStatus.argtypes = [ c_void_p ]
 PQputCopyData = libpq.PQputCopyData
+PQputCopyData.restype = c_int
 PQputCopyData.argtypes = [ c_void_p, c_void_p, c_int ]
 PQputCopyEnd = libpq.PQputCopyEnd
+PQputCopyEnd.restype = c_int
 PQputCopyEnd.argtypes = [ c_void_p, c_void_p ]
 
 sys.path.append(os.environ['PERF_EXEC_PATH'] + \

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Edgar Cherkasov <[email protected]>

commit 08d9db00fe0e300d6df976e6c294f974988226dd upstream.

The i2c-scmi driver crashes when the SMBus Write Block transaction is executed:

WARNING: CPU: 9 PID: 2194 at mm/page_alloc.c:3931 __alloc_pages_slowpath+0x9db/0xec0
 Call Trace:
  ? get_page_from_freelist+0x49d/0x11f0
  ? alloc_pages_current+0x6a/0xe0
  ? new_slab+0x499/0x690
  __alloc_pages_nodemask+0x265/0x280
  alloc_pages_current+0x6a/0xe0
  kmalloc_order+0x18/0x40
  kmalloc_order_trace+0x24/0xb0
  ? acpi_ut_allocate_object_desc_dbg+0x62/0x10c
  __kmalloc+0x203/0x220
  acpi_os_allocate_zeroed+0x34/0x36
  acpi_ut_copy_eobject_to_iobject+0x266/0x31e
  acpi_evaluate_object+0x166/0x3b2
  acpi_smbus_cmi_access+0x144/0x530 [i2c_scmi]
  i2c_smbus_xfer+0xda/0x370
  i2cdev_ioctl_smbus+0x1bd/0x270
  i2cdev_ioctl+0xaa/0x250
  do_vfs_ioctl+0xa4/0x600
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x73/0x130
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

ACPI Error: Evaluating _SBW: 4 (20170831/smbus_cmi-185)

This problem occurs because the length of ACPI Buffer object is not defined/initialized in the code before a corresponding ACPI method is called. The obvious patch below fixes this issue.

---
 drivers/i2c/busses/i2c-scmi.c |    1 +
 1 file changed, 1 insertion(+)

@@ -152,6 +152,7 @@ acpi_smbus_cmi_access(struct i2c_adapter
 			mt_params[3].type = ACPI_TYPE_INTEGER;
 			mt_params[3].integer.value = len;
 			mt_params[4].type = ACPI_TYPE_BUFFER;
+			mt_params[4].buffer.length = len;
 			mt_params[4].buffer.pointer = data->block + 1;
 		}
 		break;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <[email protected]>

commit 1208d8a84fdcae6b395c57911cdf907450d30e70 upstream.

When disabling a USB3 port the hub driver will set the port link state to U3 to prevent "ejected" or "safely removed" devices that are still physically connected from immediately re-enumerating.

If the device was really unplugged, then error messages were printed as the hub tries to set the U3 link state for a port that is no longer enabled.

xhci-hcd ee000000.usb: Cannot set link state.
usb usb8-port1: cannot disable (err = -32)

Don't print error message in xhci-hub if hub tries to set port link state for a disabled port. Return -ENODEV instead which also silences hub driver.

---
 drivers/usb/host/xhci-hub.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

@@ -1048,17 +1048,17 @@ int xhci_hub_control(struct usb_hcd *hcd
 				temp = readl(port_array[wIndex]);
 				break;
 			}
-
-			/* Software should not attempt to set
-			 * port link state above '3' (U3) and the port
-			 * must be enabled.
-			 */
-			if ((temp & PORT_PE) == 0 ||
-				(link_state > USB_SS_PORT_LS_U3)) {
-				xhci_warn(xhci, "Cannot set link state.\n");
+			/* Port must be enabled */
+			if (!(temp & PORT_PE)) {
+				retval = -ENODEV;
+				break;
+			}
+			/* Can't set port link state above '3' (U3) */
+			if (link_state > USB_SS_PORT_LS_U3) {
+				xhci_warn(xhci, "Cannot set port %d link state %d\n",
+					 wIndex, link_state);
 				goto error;
 			}
-
 			if (link_state == USB_SS_PORT_LS_U3) {
 				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 						wIndex + 1);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hou Tao <[email protected]>

When a file have multiple xattrs and the passed buffer is smaller than the required size, jffs2_listxattr() should return -ERANGE instead of continue, else Oops may occur due to memory corruption.

Also remove the unnecessary check ("rc < 0"), because xhandle->list(...) will not return an error number.

Spotted by generic/377 in xfstests-dev.

NB: The problem had been fixed by commit 764a5c6b1fa4 ("xattr
handlers: Simplify list operation") in v4.5-rc1, but the modification in that commit may be too much because it modifies all file-systems which implement xattr, so I create a single patch for jffs2 to fix the problem.

---
 fs/jffs2/xattr.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -1004,12 +1004,14 @@ ssize_t jffs2_listxattr(struct dentry *d
 			rc = xhandle->list(xhandle, dentry, buffer + len,
 					   size - len, xd->xname,
 					   xd->name_len);
+			if (rc > size - len) {
+				rc = -ERANGE;
+				goto out;
+			}
 		} else {
 			rc = xhandle->list(xhandle, dentry, NULL, 0,
 					   xd->xname, xd->name_len);
 		}
-		if (rc < 0)
-			goto out;
 		len += rc;
 	}
 	rc = len;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Chan <[email protected]>

[ Upstream commit 73f21c653f930f438d53eed29b5e4c65c8a0f906 ]

The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached.

We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget.

Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <[email protected]>

---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

@@ -1343,8 +1343,11 @@ static int bnxt_poll_work(struct bnxt *b
 		if (TX_CMP_TYPE(txcmp) == CMP_TYPE_TX_L2_CMP) {
 			tx_pkts++;
 			/* return full budget so NAPI will complete. */
-			if (unlikely(tx_pkts > bp->tx_wake_thresh))
+			if (unlikely(tx_pkts > bp->tx_wake_thresh)) {
 				rx_pkts = budget;
+				raw_cons = NEXT_RAW_CMP(raw_cons);
+				break;
+			}
 		} else if ((TX_CMP_TYPE(txcmp) & 0x30) == 0x10) {
 			rc = bnxt_rx_pkt(bp, bnapi, &raw_cons, &agg_event);
 			if (likely(rc >= 0))

@@ -1362,7 +1365,7 @@ static int bnxt_poll_work(struct bnxt *b
 		}
 		raw_cons = NEXT_RAW_CMP(raw_cons);
 
-		if (rx_pkts == budget)
+		if (rx_pkts && rx_pkts == budget)
 			break;
 	}
 

@@ -1404,8 +1407,12 @@ static int bnxt_poll(struct napi_struct
 	while (1) {
 		work_done += bnxt_poll_work(bp, bnapi, budget - work_done);
 
-		if (work_done >= budget)
+		if (work_done >= budget) {
+			if (!budget)
+				BNXT_CP_DB_REARM(cpr->cp_doorbell,
+						 cpr->cp_raw_cons);
 			break;
+		}
 
 		if (!bnxt_has_work(bp, cpr)) {
 			napi_complete(napi);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mahesh Bandewar <[email protected]>

[ Upstream commit d4859d749aa7090ffb743d15648adb962a1baeae ]

Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel -

======================================================
WARNING: possible circular locking dependency detected
4.18.0-next-20180823+ #46 Not tainted
------------------------------------------------------
syz-executor4/26841 is trying to acquire lock:
00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652

but task is already holding lock:
00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (rtnl_mutex){+.+.}:

       __mutex_lock_common kernel/locking/mutex.c:925 [inline]
       __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073
       mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088
       rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
       bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline]
       bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320
       process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153
       worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
       kthread+0x35a/0x420 kernel/kthread.c:246
       ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

-> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}:

       process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129
       worker_thread+0x189/0x13c0 kernel/workqueue.c:2296
       kthread+0x35a/0x420 kernel/kthread.c:246
       ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

-> #0 ((wq_completion)bond_dev->name){+.+.}:

       lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
       flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
       drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
       destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
       __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
       bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
       register_netdevice+0x337/0x1100 net/core/dev.c:8410
       bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
       rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
       rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
       netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
       rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
       netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
       netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
       netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
       sock_sendmsg_nosec net/socket.c:622 [inline]
       sock_sendmsg+0xd5/0x120 net/socket.c:632
       ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
       __sys_sendmsg+0x11d/0x290 net/socket.c:2153
       __do_sys_sendmsg net/socket.c:2162 [inline]
       __se_sys_sendmsg net/socket.c:2160 [inline]
       __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
       do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

other info that might help us debug this:

Chain exists of:
  (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock((work_completion)(&(&nnw->work)->work));
                               lock(rtnl_mutex);

lock((wq_completion)bond_dev->name);

*** DEADLOCK ***

1 lock held by syz-executor4/26841:

stack backtrace:
CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222
 check_prev_add kernel/locking/lockdep.c:1862 [inline]
 check_prevs_add kernel/locking/lockdep.c:1975 [inline]
 validate_chain kernel/locking/lockdep.c:2416 [inline]
 __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412
 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901
 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655
 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820
 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155
 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138
 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734
 register_netdevice+0x337/0x1100 net/core/dev.c:8410
 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453
 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099
 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711
 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454
 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:632
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115
 __sys_sendmsg+0x11d/0x290 net/socket.c:2153
 __do_sys_sendmsg net/socket.c:2162 [inline]
 __se_sys_sendmsg net/socket.c:2160 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457089
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001

---
 drivers/net/bonding/bond_main.c |   43 +++++++++++++++-------------------------
 include/net/bonding.h           |    7 ------
 2 files changed, 18 insertions(+), 32 deletions(-)

@@ -216,6 +216,7 @@ static struct rtnl_link_stats64 *bond_ge
 static void bond_slave_arr_handler(struct work_struct *work);
 static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act,
 				  int mod);
+static void bond_netdev_notify_work(struct work_struct *work);
 
 /*---------------------------- General routines -----------------------------*/
 

@@ -1237,6 +1238,8 @@ static struct slave *bond_alloc_slave(st
 			return NULL;
 		}
 	}
+	INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work);
+
 	return slave;
 }
 

@@ -1244,6 +1247,7 @@ static void bond_free_slave(struct slave
 {
 	struct bonding *bond = bond_get_bond_by_slave(slave);
 
+	cancel_delayed_work_sync(&slave->notify_work);
 	if (BOND_MODE(bond) == BOND_MODE_8023AD)
 		kfree(SLAVE_AD_INFO(slave));
 

@@ -1265,39 +1269,26 @@ static void bond_fill_ifslave(struct sla
 	info->link_failure_count = slave->link_failure_count;
 }
 
-static void bond_netdev_notify(struct net_device *dev,
-			       struct netdev_bonding_info *info)
-{
-	rtnl_lock();
-	netdev_bonding_info_change(dev, info);
-	rtnl_unlock();
-}
-
 static void bond_netdev_notify_work(struct work_struct *_work)
 {
-	struct netdev_notify_work *w =
-		container_of(_work, struct netdev_notify_work, work.work);
+	struct slave *slave = container_of(_work, struct slave,
+					   notify_work.work);
+
+	if (rtnl_trylock()) {
+		struct netdev_bonding_info binfo;
 
-	bond_netdev_notify(w->dev, &w->bonding_info);
-	dev_put(w->dev);
-	kfree(w);
+		bond_fill_ifslave(slave, &binfo.slave);
+		bond_fill_ifbond(slave->bond, &binfo.master);
+		netdev_bonding_info_change(slave->dev, &binfo);
+		rtnl_unlock();
+	} else {
+		queue_delayed_work(slave->bond->wq, &slave->notify_work, 1);
+	}
 }
 
 void bond_queue_slave_event(struct slave *slave)
 {
-	struct bonding *bond = slave->bond;
-	struct netdev_notify_work *nnw = kzalloc(sizeof(*nnw), GFP_ATOMIC);
-
-	if (!nnw)
-		return;
-
-	dev_hold(slave->dev);
-	nnw->dev = slave->dev;
-	bond_fill_ifslave(slave, &nnw->bonding_info.slave);
-	bond_fill_ifbond(bond, &nnw->bonding_info.master);
-	INIT_DELAYED_WORK(&nnw->work, bond_netdev_notify_work);
-
-	queue_delayed_work(slave->bond->wq, &nnw->work, 0);
+	queue_delayed_work(slave->bond->wq, &slave->notify_work, 0);
 }
 
 /* enslave device <slave> to bond device <master> */

@@ -146,12 +146,6 @@ struct bond_parm_tbl {
 	int mode;
 };
 
-struct netdev_notify_work {
-	struct delayed_work	work;
-	struct net_device	*dev;
-	struct netdev_bonding_info bonding_info;
-};
-
 struct slave {
 	struct net_device *dev; /* first - useful for panic debug */
 	struct bonding *bond; /* our master */

@@ -177,6 +171,7 @@ struct slave {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	struct netpoll *np;
 #endif
+	struct delayed_work notify_work;
 	struct kobject kobj;
 	struct rtnl_link_stats64 slave_stats;
 };

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <[email protected]>

[ Upstream commit 76c0ddd8c3a683f6e2c6e60e11dc1a1558caf4bc ]

the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat:

BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307
[inline]
BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0
net/ipv6/ip6_tunnel.c:1390
CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x185/0x1d0 lib/dump_stack.c:53
  kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
  __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
  ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline]
  ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390
  __netdev_start_xmit include/linux/netdevice.h:4066 [inline]
  netdev_start_xmit include/linux/netdevice.h:4075 [inline]
  xmit_one net/core/dev.c:3026 [inline]
  dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042
  __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557
  dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
  packet_snd net/packet/af_packet.c:2944 [inline]
  packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
  __sys_sendmmsg+0x42d/0x800 net/socket.c:2136
  SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
  SyS_sendmmsg+0x63/0x90 net/socket.c:2162
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x441819
RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819
RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510
R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:

  kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
  kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
  kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
  kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
  slab_post_alloc_hook mm/slab.h:445 [inline]
  slab_alloc_node mm/slub.c:2737 [inline]
  __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
  __kmalloc_reserve net/core/skbuff.c:138 [inline]
  __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
  alloc_skb include/linux/skbuff.h:984 [inline]
  alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
  sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
  packet_alloc_skb net/packet/af_packet.c:2803 [inline]
  packet_snd net/packet/af_packet.c:2894 [inline]
  packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg net/socket.c:640 [inline]
  ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
  __sys_sendmmsg+0x42d/0x800 net/socket.c:2136
  SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167
  SyS_sendmmsg+0x63/0x90 net/socket.c:2162
  do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

This change addresses the issue adding the needed check before accessing the inner header.

The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history.

---
 net/ipv6/ip6_tunnel.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

@@ -1096,7 +1096,7 @@ static inline int
 ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip6_tnl *t = netdev_priv(dev);
-	const struct iphdr  *iph = ip_hdr(skb);
+	const struct iphdr  *iph;
 	int encap_limit = -1;
 	struct flowi6 fl6;
 	__u8 dsfield;

@@ -1104,6 +1104,11 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, str
 	u8 tproto;
 	int err;
 
+	/* ensure we can access the full inner ip header */
+	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+		return -1;
+
+	iph = ip_hdr(skb);
 	memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
 
 	tproto = ACCESS_ONCE(t->parms.proto);

@@ -1140,7 +1145,7 @@ static inline int
 ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip6_tnl *t = netdev_priv(dev);
-	struct ipv6hdr *ipv6h = ipv6_hdr(skb);
+	struct ipv6hdr *ipv6h;
 	int encap_limit = -1;
 	__u16 offset;
 	struct flowi6 fl6;

@@ -1149,6 +1154,10 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
 	u8 tproto;
 	int err;
 
+	if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
+		return -1;
+
+	ipv6h = ipv6_hdr(skb);
 	tproto = ACCESS_ONCE(t->parms.proto);
 	if ((tproto != IPPROTO_IPV6 && tproto != 0) ||
 	    ip6_tnl_addr_conflict(t, ipv6h))

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <[email protected]>

[ Upstream commit ccfec9e5cb2d48df5a955b7bf47f7782157d3bc2]

Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") even for ipv4 tunnels.

---
 net/ipv4/ip_tunnel.c |    9 +++++++++
 1 file changed, 9 insertions(+)

@@ -597,6 +597,7 @@ void ip_tunnel_xmit(struct sk_buff *skb,
 		    const struct iphdr *tnl_params, u8 protocol)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
+	unsigned int inner_nhdr_len = 0;
 	const struct iphdr *inner_iph;
 	struct flowi4 fl4;
 	u8     tos, ttl;

@@ -607,6 +608,14 @@ void ip_tunnel_xmit(struct sk_buff *skb,
 	int err;
 	bool connected;
 
+	/* ensure we can access the inner net header, for several users below */
+	if (skb->protocol == htons(ETH_P_IP))
+		inner_nhdr_len = sizeof(struct iphdr);
+	else if (skb->protocol == htons(ETH_P_IPV6))
+		inner_nhdr_len = sizeof(struct ipv6hdr);
+	if (unlikely(!pskb_may_pull(skb, inner_nhdr_len)))
+		goto tx_error;
+
 	inner_iph = (const struct iphdr *)skb_inner_network_header(skb);
 	connected = (tunnel->parms.iph.daddr != 0);
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 64199fc0a46ba211362472f7f942f900af9492fd ]

Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy, do not do it.

---
 net/ipv4/ip_sockglue.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

@@ -134,7 +134,6 @@ static void ip_cmsg_recv_security(struct
 static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb)
 {
 	struct sockaddr_in sin;
-	const struct iphdr *iph = ip_hdr(skb);
 	__be16 *ports;
 	int end;
 

@@ -149,7 +148,7 @@ static void ip_cmsg_recv_dstaddr(struct
 	ports = (__be16 *)skb_transport_header(skb);
 
 	sin.sin_family = AF_INET;
-	sin.sin_addr.s_addr = iph->daddr;
+	sin.sin_addr.s_addr = ip_hdr(skb)->daddr;
 	sin.sin_port = ports[1];
 	memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <[email protected]>

[ Upstream commit af7d6cce53694a88d6a1bb60c9a239a6a5144459 ]

Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore.

As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale:
- if the local MTU is now lower than the PMTU, that PMTU is now incorrect
- if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU

Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those cases.

If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed.

To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function.

---
 include/linux/netdevice.h |    7 ++++++
 include/net/ip_fib.h      |    1 
 net/core/dev.c            |   28 +++++++++++++++++++++++--
 net/ipv4/fib_frontend.c   |   12 +++++++----
 net/ipv4/fib_semantics.c  |   50 ++++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 92 insertions(+), 6 deletions(-)

@@ -2168,6 +2168,13 @@ struct netdev_notifier_info {
 	struct net_device *dev;
 };
 
+struct netdev_notifier_info_ext {
+	struct netdev_notifier_info info; /* must be first */
+	union {
+		u32 mtu;
+	} ext;
+};
+
 struct netdev_notifier_change_info {
 	struct netdev_notifier_info info; /* must be first */
 	unsigned int flags_changed;

@@ -322,6 +322,7 @@ int ip_fib_check_default(__be32 gw, stru
 int fib_sync_down_dev(struct net_device *dev, unsigned long event, bool force);
 int fib_sync_down_addr(struct net *net, __be32 local);
 int fib_sync_up(struct net_device *dev, unsigned int nh_flags);
+void fib_sync_mtu(struct net_device *dev, u32 orig_mtu);
 
 extern u32 fib_multipath_secret __read_mostly;
 

@@ -1660,6 +1660,28 @@ int call_netdevice_notifiers(unsigned lo
 }
 EXPORT_SYMBOL(call_netdevice_notifiers);
 
+/**
+ *	call_netdevice_notifiers_mtu - call all network notifier blocks
+ *	@val: value passed unmodified to notifier function
+ *	@dev: net_device pointer passed unmodified to notifier function
+ *	@arg: additional u32 argument passed to the notifier function
+ *
+ *	Call all network notifier blocks.  Parameters and return value
+ *	are as for raw_notifier_call_chain().
+ */
+static int call_netdevice_notifiers_mtu(unsigned long val,
+					struct net_device *dev, u32 arg)
+{
+	struct netdev_notifier_info_ext info = {
+		.info.dev = dev,
+		.ext.mtu = arg,
+	};
+
+	BUILD_BUG_ON(offsetof(struct netdev_notifier_info_ext, info) != 0);
+
+	return call_netdevice_notifiers_info(val, dev, &info.info);
+}
+
 #ifdef CONFIG_NET_INGRESS
 static struct static_key ingress_needed __read_mostly;
 

@@ -6134,14 +6156,16 @@ int dev_set_mtu(struct net_device *dev,
 	err = __dev_set_mtu(dev, new_mtu);
 
 	if (!err) {
-		err = call_netdevice_notifiers(NETDEV_CHANGEMTU, dev);
+		err = call_netdevice_notifiers_mtu(NETDEV_CHANGEMTU, dev,
+						   orig_mtu);
 		err = notifier_to_errno(err);
 		if (err) {
 			/* setting mtu back and notifying everyone again,
 			 * so that they have a chance to revert changes.
 			 */
 			__dev_set_mtu(dev, orig_mtu);
-			call_netdevice_notifiers(NETDEV_CHANGEMTU, dev);
+			call_netdevice_notifiers_mtu(NETDEV_CHANGEMTU, dev,
+						     new_mtu);
 		}
 	}
 	return err;

@@ -1170,7 +1170,8 @@ static int fib_inetaddr_event(struct not
 static int fib_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
 {
 	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-	struct netdev_notifier_changeupper_info *info;
+	struct netdev_notifier_changeupper_info *upper_info = ptr;
+	struct netdev_notifier_info_ext *info_ext = ptr;
 	struct in_device *in_dev;
 	struct net *net = dev_net(dev);
 	unsigned int flags;

@@ -1205,16 +1206,19 @@ static int fib_netdev_event(struct notif
 			fib_sync_up(dev, RTNH_F_LINKDOWN);
 		else
 			fib_sync_down_dev(dev, event, false);
-		/* fall through */
+		rt_cache_flush(net);
+		break;
 	case NETDEV_CHANGEMTU:
+		fib_sync_mtu(dev, info_ext->ext.mtu);
 		rt_cache_flush(net);
 		break;
 	case NETDEV_CHANGEUPPER:
-		info = ptr;
+		upper_info = ptr;
 		/* flush all routes if dev is linked to or unlinked from
 		 * an L3 master device (e.g., VRF)
 		 */
-		if (info->upper_dev && netif_is_l3_master(info->upper_dev))
+		if (upper_info->upper_dev &&
+		    netif_is_l3_master(upper_info->upper_dev))
 			fib_disable_ip(dev, NETDEV_DOWN, true);
 		break;
 	}

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeff Barnhill <[email protected]>

[ Upstream commit 86f9bd1ff61c413a2a251fa736463295e4e24733 ]

The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly handle starting/stopping the iteration. The problem is that at some point during the iteration, an overflow is detected and the process is subsequently stopped. The item being shown via seq_printf() when the overflow occurs is not actually shown, though. When start() is subsequently called to resume iterating, it returns the next item, and thus the item that was being processed when the overflow occurred never gets printed.

Alter the meaning of the private data member "offset". Currently, when it is not 0 (which only happens at the very beginning), "offset" represents the next hlist item to be printed. After this change, "offset" always represents the current item.

This is also consistent with the private data member "bucket", which represents the current bucket, and also the use of "pos" as defined in seq_file.txt:
The pos passed to start() will always be either zero, or the most recent pos used in the previous session.

---
 net/ipv6/addrconf.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

@@ -3786,7 +3786,6 @@ static struct inet6_ifaddr *if6_get_firs
 				p++;
 				continue;
 			}
-			state->offset++;
 			return ifa;
 		}
 

@@ -3810,13 +3809,12 @@ static struct inet6_ifaddr *if6_get_next
 		return ifa;
 	}
 
+	state->offset = 0;
 	while (++state->bucket < IN6_ADDR_HSIZE) {
-		state->offset = 0;
 		hlist_for_each_entry_rcu_bh(ifa,
 				     &inet6_addr_lst[state->bucket], addr_lst) {
 			if (!net_eq(dev_net(ifa->idev->dev), net))
 				continue;
-			state->offset++;
 			return ifa;
 		}
 	}

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Tranchetti <[email protected]>

[ Upstream commit f88b4c01b97e09535505cf3c327fdbce55c27f00 ]

netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this.

If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute:

Unable to handle kernel NULL pointer dereference at virtual address 0
Process unlab (pid: 31762, stack limit = 0xffffff80502d8000)
Call trace:
	netlbl_unlabel_addrinfo_get+0x44/0xd8
	netlbl_unlabel_staticremovedef+0x98/0xe0
	genl_rcv_msg+0x354/0x388
	netlink_rcv_skb+0xac/0x118
	genl_rcv+0x34/0x48
	netlink_unicast+0x158/0x1f0
	netlink_sendmsg+0x32c/0x338
	sock_sendmsg+0x44/0x60
	___sys_sendmsg+0x1d0/0x2a8
	__sys_sendmsg+0x64/0xb4
	SyS_sendmsg+0x34/0x4c
	el0_svc_naked+0x34/0x38
Code: 51001149 7100113f 540000a0 f9401508 (79400108)
---[ end trace f6438a488e737143 ]---
Kernel panic - not syncing: Fatal exception

---
 net/netlabel/netlabel_unlabeled.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -787,7 +787,8 @@ static int netlbl_unlabel_addrinfo_get(s
 {
 	u32 addr_len;
 
-	if (info->attrs[NLBL_UNLABEL_A_IPV4ADDR]) {
+	if (info->attrs[NLBL_UNLABEL_A_IPV4ADDR] &&
+	    info->attrs[NLBL_UNLABEL_A_IPV4MASK]) {
 		addr_len = nla_len(info->attrs[NLBL_UNLABEL_A_IPV4ADDR]);
 		if (addr_len != sizeof(struct in_addr) &&
 		    addr_len != nla_len(info->attrs[NLBL_UNLABEL_A_IPV4MASK]))

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yu Zhao <[email protected]>

[ Upstream commit f7b2a56e1f3dcbdb4cf09b2b63e859ffe0e09df8 ]

Cancel pending work before freeing smsc75xx private data structure during binding. This fixes the following crash in the driver:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: mutex_lock+0x2b/0x3f
<snipped>
Workqueue: events smsc75xx_deferred_multicast_write [smsc75xx]
task: ffff8caa83e85700 task.stack: ffff948b80518000
RIP: 0010:mutex_lock+0x2b/0x3f
<snipped>
Call Trace:
 smsc75xx_deferred_multicast_write+0x40/0x1af [smsc75xx]
 process_one_work+0x18d/0x2fc
 worker_thread+0x1a2/0x269
 ? pr_cont_work+0x58/0x58
 kthread+0xfa/0x10a
 ? pr_cont_work+0x58/0x58
 ? rcu_read_unlock_sched_notrace+0x48/0x48
 ret_from_fork+0x22/0x40

---
 drivers/net/usb/smsc75xx.c |    1 +
 1 file changed, 1 insertion(+)

@@ -1506,6 +1506,7 @@ static void smsc75xx_unbind(struct usbne
 {
 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
 	if (pdata) {
+		cancel_work_sync(&pdata->set_multicast);
 		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
 		kfree(pdata);
 		pdata = NULL;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shahed Shaikh <[email protected]>

[ Upstream commit c333fa0c4f220f8f7ea5acd6b0ebf3bf13fd684d ]

In regular NIC transmission flow, driver always configures MAC using Tx queue zero descriptor as a part of MAC learning flow.
But with multi Tx queue supported NIC, regular transmission can occur on any non-zero Tx queue and from that context it uses
Tx queue zero descriptor to configure MAC, at the same time TX queue zero could be used by another CPU for regular transmission which could lead to Tx queue zero descriptor corruption and cause FW abort.

This patch fixes this in such a way that driver always configures learned MAC address from the same Tx queue which is used for regular transmission.

---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic.h         |    8 +++++---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c |    3 ++-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h |    3 ++-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h      |    3 ++-
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c      |   12 ++++++------
 5 files changed, 17 insertions(+), 12 deletions(-)

@@ -1802,7 +1802,8 @@ struct qlcnic_hardware_ops {
 	int (*config_loopback) (struct qlcnic_adapter *, u8);
 	int (*clear_loopback) (struct qlcnic_adapter *, u8);
 	int (*config_promisc_mode) (struct qlcnic_adapter *, u32);
-	void (*change_l2_filter) (struct qlcnic_adapter *, u64 *, u16);
+	void (*change_l2_filter)(struct qlcnic_adapter *adapter, u64 *addr,
+				 u16 vlan, struct qlcnic_host_tx_ring *tx_ring);
 	int (*get_board_info) (struct qlcnic_adapter *);
 	void (*set_mac_filter_count) (struct qlcnic_adapter *);
 	void (*free_mac_list) (struct qlcnic_adapter *);

@@ -2044,9 +2045,10 @@ static inline int qlcnic_nic_set_promisc
 }
 
 static inline void qlcnic_change_filter(struct qlcnic_adapter *adapter,
-					u64 *addr, u16 id)
+					u64 *addr, u16 vlan,
+					struct qlcnic_host_tx_ring *tx_ring)
 {
-	adapter->ahw->hw_ops->change_l2_filter(adapter, addr, id);
+	adapter->ahw->hw_ops->change_l2_filter(adapter, addr, vlan, tx_ring);
 }
 
 static inline int qlcnic_get_board_info(struct qlcnic_adapter *adapter)

@@ -2132,7 +2132,8 @@ out:
 }
 
 void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr,
-				  u16 vlan_id)
+				  u16 vlan_id,
+				  struct qlcnic_host_tx_ring *tx_ring)
 {
 	u8 mac[ETH_ALEN];
 	memcpy(&mac, addr, ETH_ALEN);

@@ -550,7 +550,8 @@ int qlcnic_83xx_wrt_reg_indirect(struct
 int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *, u32);
 int qlcnic_83xx_config_hw_lro(struct qlcnic_adapter *, int);
 int qlcnic_83xx_config_rss(struct qlcnic_adapter *, int);
-void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *, u64 *, u16);
+void qlcnic_83xx_change_l2_filter(struct qlcnic_adapter *adapter, u64 *addr,
+				  u16 vlan, struct qlcnic_host_tx_ring *ring);
 int qlcnic_83xx_get_pci_info(struct qlcnic_adapter *, struct qlcnic_pci_info *);
 int qlcnic_83xx_set_nic_info(struct qlcnic_adapter *, struct qlcnic_info *);
 void qlcnic_83xx_initialize_nic(struct qlcnic_adapter *, int);

@@ -173,7 +173,8 @@ int qlcnic_82xx_napi_add(struct qlcnic_a
 			 struct net_device *netdev);
 void qlcnic_82xx_get_beacon_state(struct qlcnic_adapter *);
 void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter,
-			       u64 *uaddr, u16 vlan_id);
+			       u64 *uaddr, u16 vlan_id,
+			       struct qlcnic_host_tx_ring *tx_ring);
 int qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *,
 				     struct ethtool_coalesce *);
 int qlcnic_82xx_set_rx_coalesce(struct qlcnic_adapter *);

@@ -269,13 +269,12 @@ static void qlcnic_add_lb_filter(struct
 }
 
 void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr,
-			       u16 vlan_id)
+			       u16 vlan_id, struct qlcnic_host_tx_ring *tx_ring)
 {
 	struct cmd_desc_type0 *hwdesc;
 	struct qlcnic_nic_req *req;
 	struct qlcnic_mac_req *mac_req;
 	struct qlcnic_vlan_req *vlan_req;
-	struct qlcnic_host_tx_ring *tx_ring = adapter->tx_ring;
 	u32 producer;
 	u64 word;
 

@@ -302,7 +301,8 @@ void qlcnic_82xx_change_filter(struct ql
 
 static void qlcnic_send_filter(struct qlcnic_adapter *adapter,
 			       struct cmd_desc_type0 *first_desc,
-			       struct sk_buff *skb)
+			       struct sk_buff *skb,
+			       struct qlcnic_host_tx_ring *tx_ring)
 {
 	struct vlan_ethhdr *vh = (struct vlan_ethhdr *)(skb->data);
 	struct ethhdr *phdr = (struct ethhdr *)(skb->data);

@@ -336,7 +336,7 @@ static void qlcnic_send_filter(struct ql
 		    tmp_fil->vlan_id == vlan_id) {
 			if (jiffies > (QLCNIC_READD_AGE * HZ + tmp_fil->ftime))
 				qlcnic_change_filter(adapter, &src_addr,
-						     vlan_id);
+						     vlan_id, tx_ring);
 			tmp_fil->ftime = jiffies;
 			return;
 		}

@@ -351,7 +351,7 @@ static void qlcnic_send_filter(struct ql
 	if (!fil)
 		return;
 
-	qlcnic_change_filter(adapter, &src_addr, vlan_id);
+	qlcnic_change_filter(adapter, &src_addr, vlan_id, tx_ring);
 	fil->ftime = jiffies;
 	fil->vlan_id = vlan_id;
 	memcpy(fil->faddr, &src_addr, ETH_ALEN);

@@ -767,7 +767,7 @@ netdev_tx_t qlcnic_xmit_frame(struct sk_
 	}
 
 	if (adapter->drv_mac_learn)
-		qlcnic_send_filter(adapter, first_desc, skb);
+		qlcnic_send_filter(adapter, first_desc, skb, tx_ring);
 
 	tx_ring->tx_stats.tx_bytes += skb->len;
 	tx_ring->tx_stats.xmit_called++;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <[email protected]>

[ Upstream commit 471b83bd8bbe4e89743683ef8ecb78f7029d8288 ]

team's ndo_add_slave() acquires 'team->lock' and later tries to open the newly enslaved device via dev_open(). This emits a 'NETDEV_UP' event that causes the VLAN driver to add VLAN 0 on the team device. team's ndo_vlan_rx_add_vid() will also try to acquire 'team->lock' and deadlock.

Fix this by checking early at the enslavement function that a team device is not being enslaved to itself.

A similar check was added to the bond driver in commit 09a89c219baf ("bonding: disallow enslaving a bond to itself").

WARNING: possible recursive locking detected
4.18.0-rc7+ #176 Not tainted
--------------------------------------------
syz-executor4/6391 is trying to acquire lock:
(____ptrval____) (&team->lock){+.+.}, at: team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868

but task is already holding lock:
(____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0
       ----

lock(&team->lock);
lock(&team->lock);

*** DEADLOCK ***

May be due to missing lock nesting notation

2 locks held by syz-executor4/6391:
#0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4662 #1: (____ptrval____) (&team->lock){+.+.}, at: team_add_slave+0xdb/0x1c30 drivers/net/team/team.c:1947

stack backtrace:
CPU: 1 PID: 6391 Comm: syz-executor4 Not tainted 4.18.0-rc7+ #176
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
 check_deadlock kernel/locking/lockdep.c:1809 [inline]
 validate_chain kernel/locking/lockdep.c:2405 [inline]
 __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
 __mutex_lock_common kernel/locking/mutex.c:757 [inline]
 __mutex_lock+0x176/0x1820 kernel/locking/mutex.c:894
 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:909
 team_vlan_rx_add_vid+0x3b/0x1e0 drivers/net/team/team.c:1868
 vlan_add_rx_filter_info+0x14a/0x1d0 net/8021q/vlan_core.c:210
 __vlan_vid_add net/8021q/vlan_core.c:278 [inline]
 vlan_vid_add+0x63e/0x9d0 net/8021q/vlan_core.c:308
 vlan_device_event.cold.12+0x2a/0x2f net/8021q/vlan.c:381
 notifier_call_chain+0x180/0x390 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
 call_netdevice_notifiers net/core/dev.c:1753 [inline]
 dev_open+0x173/0x1b0 net/core/dev.c:1433
 team_port_add drivers/net/team/team.c:1219 [inline]
 team_add_slave+0xa8b/0x1c30 drivers/net/team/team.c:1948
 do_set_master+0x1c9/0x220 net/core/rtnetlink.c:2248
 do_setlink+0xba4/0x3e10 net/core/rtnetlink.c:2382
 rtnl_setlink+0x2a9/0x400 net/core/rtnetlink.c:2636
 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4665
 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2455
 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4683
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0xa18/0xfd0 net/netlink/af_netlink.c:1908
 sock_sendmsg_nosec net/socket.c:642 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:652
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2126
 __sys_sendmsg+0x11d/0x290 net/socket.c:2164
 __do_sys_sendmsg net/socket.c:2173 [inline]
 __se_sys_sendmsg net/socket.c:2171 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2171
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x456b29
Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f9706bf8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9706bf96d4 RCX: 0000000000456b29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004
RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000004d3548 R14: 00000000004c8227 R15: 0000000000000000

---
 drivers/net/team/team.c |    5 +++++
 1 file changed, 5 insertions(+)

@@ -1142,6 +1142,11 @@ static int team_port_add(struct team *te
 		return -EBUSY;
 	}
 
+	if (dev == port_dev) {
+		netdev_err(dev, "Cannot enslave team device to itself\n");
+		return -EINVAL;
+	}
+
 	if (port_dev->features & NETIF_F_VLAN_CHALLENGED &&
 	    vlan_uses_dev(dev)) {
 		netdev_err(dev, "Device %s is VLAN challenged and team device has VLAN set up\n",

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Maxime Chevallier <[email protected]>

[ Upstream commit 35f3625c21852ad839f20c91c7d81c4c1101e207 ]

When offloading the L3 and L4 csum computation on TX, we need to extract the l3_proto from the ethtype, independently of the presence of a vlan tag.

The actual driver uses skb->protocol as-is, resulting in packets with the wrong L4 checksum being sent when there's a vlan tag in the packet header and checksum offloading is enabled.

This commit makes use of vlan_protocol_get() to get the correct ethtype regardless the presence of a vlan tag.

---
 drivers/net/ethernet/marvell/mvpp2.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

@@ -29,6 +29,7 @@
 #include <linux/clk.h>
 #include <linux/hrtimer.h>
 #include <linux/ktime.h>
+#include <linux/if_vlan.h>
 #include <uapi/linux/ppp_defs.h>
 #include <net/ip.h>
 #include <net/ipv6.h>

@@ -4268,7 +4269,7 @@ static void mvpp2_txq_desc_put(struct mv
 }
 
 /* Set Tx descriptors fields relevant for CSUM calculation */
-static u32 mvpp2_txq_desc_csum(int l3_offs, int l3_proto,
+static u32 mvpp2_txq_desc_csum(int l3_offs, __be16 l3_proto,
 			       int ip_hdr_len, int l4_proto)
 {
 	u32 command;

@@ -5032,14 +5033,15 @@ static u32 mvpp2_skb_tx_csum(struct mvpp
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		int ip_hdr_len = 0;
 		u8 l4_proto;
+		__be16 l3_proto = vlan_get_protocol(skb);
 
-		if (skb->protocol == htons(ETH_P_IP)) {
+		if (l3_proto == htons(ETH_P_IP)) {
 			struct iphdr *ip4h = ip_hdr(skb);
 
 			/* Calculate IPv4 checksum and L4 checksum */
 			ip_hdr_len = ip4h->ihl;
 			l4_proto = ip4h->protocol;
-		} else if (skb->protocol == htons(ETH_P_IPV6)) {
+		} else if (l3_proto == htons(ETH_P_IPV6)) {
 			struct ipv6hdr *ip6h = ipv6_hdr(skb);
 
 			/* Read l4_protocol from one of IPv6 extra headers */

@@ -5051,7 +5053,7 @@ static u32 mvpp2_skb_tx_csum(struct mvpp
 		}
 
 		return mvpp2_txq_desc_csum(skb_network_offset(skb),
-				skb->protocol, ip_hdr_len, l4_proto);
+					   l3_proto, ip_hdr_len, l4_proto);
 	}
 
 	return MVPP2_TXD_L4_CSUM_NOT | MVPP2_TXD_IP_CSUM_DISABLE;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <[email protected]>

[ Upstream commit 45ec318578c0c22a11f5b9927d064418e1ab1905 ]

The AON_PM_L2 is normally used to trigger and identify the source of a wake-up event. Since the RX_SYS clock is no longer turned off, we also have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and that interrupt remains active up until the magic packet detector is disabled which happens much later during the driver resumption.

The race happens if we have a CPU that is entering the SYSTEMPORT INTRL2_0 handler during resume, and another CPU has managed to clear the wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we have the first CPU stuck in the interrupt handler with an interrupt cause that has been cleared under its feet, and so we keep returning IRQ_NONE and we never make any progress.

This was not a problem before because we would always turn off the RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned off as well, thus not latching the interrupt.

The fix is to make sure we do not enable either the MPD or BRCM_TAG_MATCH interrupts since those are redundant with what the AON_PM_L2 interrupt controller already processes and they would cause such a race to occur.

---
 drivers/net/ethernet/broadcom/bcmsysport.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

@@ -850,14 +850,22 @@ static void bcm_sysport_resume_from_wol(
 {
 	u32 reg;
 
-	/* Stop monitoring MPD interrupt */
-	intrl2_0_mask_set(priv, INTRL2_0_MPD);
-
 	/* Clear the MagicPacket detection logic */
 	reg = umac_readl(priv, UMAC_MPD_CTRL);
 	reg &= ~MPD_EN;
 	umac_writel(priv, reg, UMAC_MPD_CTRL);
 
+	reg = intrl2_0_readl(priv, INTRL2_CPU_STATUS);
+	if (reg & INTRL2_0_MPD)
+		netdev_info(priv->netdev, "Wake-on-LAN (MPD) interrupt!\n");
+
+	if (reg & INTRL2_0_BRCM_MATCH_TAG) {
+		reg = rxchk_readl(priv, RXCHK_BRCM_TAG_MATCH_STATUS) &
+				  RXCHK_BRCM_TAG_MATCH_MASK;
+		netdev_info(priv->netdev,
+			    "Wake-on-LAN (filters 0x%02x) interrupt!\n", reg);
+	}
+
 	netif_dbg(priv, wol, priv->netdev, "resumed from WOL\n");
 }
 

@@ -890,11 +898,6 @@ static irqreturn_t bcm_sysport_rx_isr(in
 	if (priv->irq0_stat & INTRL2_0_TX_RING_FULL)
 		bcm_sysport_tx_reclaim_all(priv);
 
-	if (priv->irq0_stat & INTRL2_0_MPD) {
-		netdev_info(priv->netdev, "Wake-on-LAN interrupt!\n");
-		bcm_sysport_resume_from_wol(priv);
-	}
-
 	return IRQ_HANDLED;
 }
 

@@ -1915,9 +1918,6 @@ static int bcm_sysport_suspend_to_wol(st
 	/* UniMAC receive needs to be turned on */
 	umac_enable_set(priv, CMD_RX_EN, 1);
 
-	/* Enable the interrupt wake-up source */
-	intrl2_0_mask_clear(priv, INTRL2_0_MPD);
-
 	netif_dbg(priv, wol, ndev, "entered WOL mode\n");
 
 	return 0;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 0e1d6eca5113858ed2caea61a5adc03c595f6096 ]

We have an impressive number of syzkaller bugs that are linked to the fact that syzbot was able to create a networking device with millions of TX (or RX) queues.

Let's limit the number of RX/TX queues to 4096, this really should cover all known cases.

A separate patch will add various cond_resched() in the loops handling sysfs entries at device creation and dismantle.

Tested:

lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument

lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap

real 0m0.180s
user 0m0.000s
sys 0m0.107s

---
 net/core/rtnetlink.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -2116,6 +2116,12 @@ struct net_device *rtnl_create_link(stru
 	else if (ops->get_num_rx_queues)
 		num_rx_queues = ops->get_num_rx_queues();
 
+	if (num_tx_queues < 1 || num_tx_queues > 4096)
+		return ERR_PTR(-EINVAL);
+
+	if (num_rx_queues < 1 || num_rx_queues > 4096)
+		return ERR_PTR(-EINVAL);
+
 	err = -ENOMEM;
 	dev = alloc_netdev_mqs(ops->priv_size, ifname, name_assign_type,
 			       ops->setup, num_tx_queues, num_rx_queues);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <[email protected]>

commit 5a5fbdc0e3f1159a734f1890da60fce70e98271d upstream.

It is now equal to use_eager_fpu(), which simply tests a cpufeature bit.

---
 arch/x86/include/asm/kvm_host.h |    1 -
 arch/x86/kvm/cpuid.c            |    3 +--
 arch/x86/kvm/x86.c              |    2 +-
 3 files changed, 2 insertions(+), 4 deletions(-)

@@ -439,7 +439,6 @@ struct kvm_vcpu_arch {
 	struct kvm_mmu_memory_cache mmu_page_header_cache;
 
 	struct fpu guest_fpu;
-	bool eager_fpu;
 	u64 xcr0;
 	u64 guest_supported_xcr0;
 	u32 guest_xstate_size;

@@ -104,8 +104,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vc
 	if (best && (best->eax & (F(XSAVES) | F(XSAVEC))))
 		best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
 
-	vcpu->arch.eager_fpu = use_eager_fpu();
-	if (vcpu->arch.eager_fpu)
+	if (use_eager_fpu())
 		kvm_x86_ops->fpu_activate(vcpu);
 
 	/*

@@ -7325,7 +7325,7 @@ void kvm_put_guest_fpu(struct kvm_vcpu *
 	 * Every 255 times fpu_counter rolls over to 0; a guest that uses
 	 * the FPU in bursts will revert to loading it on demand.
 	 */
-	if (!vcpu->arch.eager_fpu) {
+	if (!use_eager_fpu()) {
 		if (++vcpu->fpu_counter < 5)
 			kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu);
 	}

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <[email protected]>

commit c592b57347069abfc0dcad3b3a302cf882602597 upstream.

This removes all the obvious code paths that depend on lazy FPU mode. It shouldn't change the generated code at all.

---
 arch/x86/crypto/crc32c-intel_glue.c |   17 +++-------------
 arch/x86/include/asm/fpu/internal.h |   34 --------------------------------
 arch/x86/kernel/fpu/core.c          |   38 ++++--------------------------------
 arch/x86/kernel/fpu/signal.c        |    8 ++-----
 arch/x86/kvm/cpuid.c                |    4 ---
 arch/x86/kvm/x86.c                  |   10 ---------
 6 files changed, 14 insertions(+), 97 deletions(-)

@@ -48,21 +48,13 @@
 #ifdef CONFIG_X86_64
 /*
  * use carryless multiply version of crc32c when buffer
- * size is >= 512 (when eager fpu is enabled) or
- * >= 1024 (when eager fpu is disabled) to account
+ * size is >= 512 to account
  * for fpu state save/restore overhead.
  */
-#define CRC32C_PCL_BREAKEVEN_EAGERFPU	512
-#define CRC32C_PCL_BREAKEVEN_NOEAGERFPU	1024
+#define CRC32C_PCL_BREAKEVEN	512
 
 asmlinkage unsigned int crc_pcl(const u8 *buffer, int len,
 				unsigned int crc_init);
-static int crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_EAGERFPU;
-#define set_pcl_breakeven_point()					\
-do {									\
-	if (!use_eager_fpu())						\
-		crc32c_pcl_breakeven = CRC32C_PCL_BREAKEVEN_NOEAGERFPU;	\
-} while (0)
 #endif /* CONFIG_X86_64 */
 
 static u32 crc32c_intel_le_hw_byte(u32 crc, unsigned char const *data, size_t length)

@@ -185,7 +177,7 @@ static int crc32c_pcl_intel_update(struc
 	 * use faster PCL version if datasize is large enough to
 	 * overcome kernel fpu state save/restore overhead
 	 */
-	if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) {
+	if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) {
 		kernel_fpu_begin();
 		*crcp = crc_pcl(data, len, *crcp);
 		kernel_fpu_end();

@@ -197,7 +189,7 @@ static int crc32c_pcl_intel_update(struc
 static int __crc32c_pcl_intel_finup(u32 *crcp, const u8 *data, unsigned int len,
 				u8 *out)
 {
-	if (len >= crc32c_pcl_breakeven && irq_fpu_usable()) {
+	if (len >= CRC32C_PCL_BREAKEVEN && irq_fpu_usable()) {
 		kernel_fpu_begin();
 		*(__le32 *)out = ~cpu_to_le32(crc_pcl(data, len, *crcp));
 		kernel_fpu_end();

@@ -256,7 +248,6 @@ static int __init crc32c_intel_mod_init(
 		alg.update = crc32c_pcl_intel_update;
 		alg.finup = crc32c_pcl_intel_finup;
 		alg.digest = crc32c_pcl_intel_digest;
-		set_pcl_breakeven_point();
 	}
 #endif
 	return crypto_register_shash(&alg);

@@ -57,11 +57,6 @@ extern u64 fpu__get_supported_xfeatures_
 /*
  * FPU related CPU feature flag helper routines:
  */
-static __always_inline __pure bool use_eager_fpu(void)
-{
-	return true;
-}
-
 static __always_inline __pure bool use_xsaveopt(void)
 {
 	return static_cpu_has(X86_FEATURE_XSAVEOPT);

@@ -498,24 +493,6 @@ static inline int fpu_want_lazy_restore(
 }
 
 
-/*
- * Wrap lazy FPU TS handling in a 'hw fpregs activation/deactivation'
- * idiom, which is then paired with the sw-flag (fpregs_active) later on:
- */
-
-static inline void __fpregs_activate_hw(void)
-{
-	if (!use_eager_fpu())
-		clts();
-}
-
-static inline void __fpregs_deactivate_hw(void)
-{
-	if (!use_eager_fpu())
-		stts();
-}
-
-/* Must be paired with an 'stts' (fpregs_deactivate_hw()) after! */
 static inline void __fpregs_deactivate(struct fpu *fpu)
 {
 	WARN_ON_FPU(!fpu->fpregs_active);

@@ -524,7 +501,6 @@ static inline void __fpregs_deactivate(s
 	this_cpu_write(fpu_fpregs_owner_ctx, NULL);
 }
 
-/* Must be paired with a 'clts' (fpregs_activate_hw()) before! */
 static inline void __fpregs_activate(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu->fpregs_active);

@@ -549,22 +525,17 @@ static inline int fpregs_active(void)
 }
 
 /*
- * Encapsulate the CR0.TS handling together with the
- * software flag.
- *
  * These generally need preemption protection to work,
  * do try to avoid using these on their own.
  */
 static inline void fpregs_activate(struct fpu *fpu)
 {
-	__fpregs_activate_hw();
 	__fpregs_activate(fpu);
 }
 
 static inline void fpregs_deactivate(struct fpu *fpu)
 {
 	__fpregs_deactivate(fpu);
-	__fpregs_deactivate_hw();
 }
 
 /*

@@ -591,8 +562,7 @@ switch_fpu_prepare(struct fpu *old_fpu,
 	 * or if the past 5 consecutive context-switches used math.
 	 */
 	fpu.preload = static_cpu_has(X86_FEATURE_FPU) &&
-		      new_fpu->fpstate_active &&
-		      (use_eager_fpu() || new_fpu->counter > 5);
+		      new_fpu->fpstate_active;
 
 	if (old_fpu->fpregs_active) {
 		if (!copy_fpregs_to_fpstate(old_fpu))

@@ -608,8 +578,6 @@ switch_fpu_prepare(struct fpu *old_fpu,
 			new_fpu->counter++;
 			__fpregs_activate(new_fpu);
 			prefetch(&new_fpu->state);
-		} else {
-			__fpregs_deactivate_hw();
 		}
 	} else {
 		old_fpu->counter = 0;

@@ -53,27 +53,9 @@ static bool kernel_fpu_disabled(void)
 	return this_cpu_read(in_kernel_fpu);
 }
 
-/*
- * Were we in an interrupt that interrupted kernel mode?
- *
- * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that
- * pair does nothing at all: the thread must not have fpu (so
- * that we don't try to save the FPU state), and TS must
- * be set (so that the clts/stts pair does nothing that is
- * visible in the interrupted kernel thread).
- *
- * Except for the eagerfpu case when we return true; in the likely case
- * the thread has FPU but we are not going to set/clear TS.
- */
 static bool interrupted_kernel_fpu_idle(void)
 {
-	if (kernel_fpu_disabled())
-		return false;
-
-	if (use_eager_fpu())
-		return true;
-
-	return !current->thread.fpu.fpregs_active && (read_cr0() & X86_CR0_TS);
+	return !kernel_fpu_disabled();
 }
 
 /*

@@ -121,7 +103,6 @@ void __kernel_fpu_begin(void)
 		copy_fpregs_to_fpstate(fpu);
 	} else {
 		this_cpu_write(fpu_fpregs_owner_ctx, NULL);
-		__fpregs_activate_hw();
 	}
 }
 EXPORT_SYMBOL(__kernel_fpu_begin);

@@ -132,8 +113,6 @@ void __kernel_fpu_end(void)
 
 	if (fpu->fpregs_active)
 		copy_kernel_to_fpregs(&fpu->state);
-	else
-		__fpregs_deactivate_hw();
 
 	kernel_fpu_enable();
 }

@@ -194,10 +173,7 @@ void fpu__save(struct fpu *fpu)
 	preempt_disable();
 	if (fpu->fpregs_active) {
 		if (!copy_fpregs_to_fpstate(fpu)) {
-			if (use_eager_fpu())
-				copy_kernel_to_fpregs(&fpu->state);
-			else
-				fpregs_deactivate(fpu);
+			copy_kernel_to_fpregs(&fpu->state);
 		}
 	}
 	preempt_enable();

@@ -245,8 +221,7 @@ static void fpu_copy(struct fpu *dst_fpu
 	 * Don't let 'init optimized' areas of the XSAVE area
 	 * leak into the child task:
 	 */
-	if (use_eager_fpu())
-		memset(&dst_fpu->state.xsave, 0, xstate_size);
+	memset(&dst_fpu->state.xsave, 0, xstate_size);
 
 	/*
 	 * Save current FPU registers directly into the child

@@ -268,10 +243,7 @@ static void fpu_copy(struct fpu *dst_fpu
 	if (!copy_fpregs_to_fpstate(dst_fpu)) {
 		memcpy(&src_fpu->state, &dst_fpu->state, xstate_size);
 
-		if (use_eager_fpu())
-			copy_kernel_to_fpregs(&src_fpu->state);
-		else
-			fpregs_deactivate(src_fpu);
+		copy_kernel_to_fpregs(&src_fpu->state);
 	}
 	preempt_enable();
 }

@@ -437,7 +409,7 @@ void fpu__clear(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu); /* Almost certainly an anomaly */
 
-	if (!use_eager_fpu() || !static_cpu_has(X86_FEATURE_FPU)) {
+	if (!static_cpu_has(X86_FEATURE_FPU)) {
 		/* FPU state will be reallocated lazily at the first use. */
 		fpu__drop(fpu);
 	} else {

@@ -319,11 +319,9 @@ static int __fpu__restore_sig(void __use
 		}
 
 		fpu->fpstate_active = 1;
-		if (use_eager_fpu()) {
-			preempt_disable();
-			fpu__restore(fpu);
-			preempt_enable();
-		}
+		preempt_disable();
+		fpu__restore(fpu);
+		preempt_enable();
 
 		return err;
 	} else {

@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 #include <linux/uaccess.h>
-#include <asm/fpu/internal.h> /* For use_eager_fpu.  Ugh! */
 #include <asm/user.h>
 #include <asm/fpu/xstate.h>
 #include "cpuid.h"

@@ -104,8 +103,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vc
 	if (best && (best->eax & (F(XSAVES) | F(XSAVEC))))
 		best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
 
-	if (use_eager_fpu())
-		kvm_x86_ops->fpu_activate(vcpu);
+	kvm_x86_ops->fpu_activate(vcpu);
 
 	/*
 	 * The existing code assumes virtual address is 48-bit in the canonical

@@ -7319,16 +7319,6 @@ void kvm_put_guest_fpu(struct kvm_vcpu *
 	copy_fpregs_to_fpstate(&vcpu->arch.guest_fpu);
 	__kernel_fpu_end();
 	++vcpu->stat.fpu_reload;
-	/*
-	 * If using eager FPU mode, or if the guest is a frequent user
-	 * of the FPU, just leave the FPU active for next time.
-	 * Every 255 times fpu_counter rolls over to 0; a guest that uses
-	 * the FPU in bursts will revert to loading it on demand.
-	 */
-	if (!use_eager_fpu()) {
-		if (++vcpu->fpu_counter < 5)
-			kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu);
-	}
 	trace_kvm_fpu(0);
 }
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rik van Riel <[email protected]>

commit 3913cc3507575273beb165a5e027a081913ed507 upstream.

With the lazy FPU code gone, we no longer use the counter field in struct fpu for anything. Get rid it.

---
 arch/x86/include/asm/fpu/internal.h |    3 ---
 arch/x86/include/asm/fpu/types.h    |   11 -----------
 arch/x86/kernel/fpu/core.c          |    3 ---
 3 files changed, 17 deletions(-)

@@ -575,15 +575,12 @@ switch_fpu_prepare(struct fpu *old_fpu,
 
 		/* Don't change CR0.TS if we just switch! */
 		if (fpu.preload) {
-			new_fpu->counter++;
 			__fpregs_activate(new_fpu);
 			prefetch(&new_fpu->state);
 		}
 	} else {
-		old_fpu->counter = 0;
 		old_fpu->last_cpu = -1;
 		if (fpu.preload) {
-			new_fpu->counter++;
 			if (fpu_want_lazy_restore(new_fpu, cpu))
 				fpu.preload = 0;
 			else

@@ -303,17 +303,6 @@ struct fpu {
 	unsigned char			fpregs_active;
 
 	/*
-	 * @counter:
-	 *
-	 * This counter contains the number of consecutive context switches
-	 * during which the FPU stays used. If this is over a threshold, the
-	 * lazy FPU restore logic becomes eager, to save the trap overhead.
-	 * This is an unsigned char so that after 256 iterations the counter
-	 * wraps and the context switch behavior turns lazy again; this is to
-	 * deal with bursty apps that only use the FPU for a short time:
-	 */
-	unsigned char			counter;
-	/*
 	 * @state:
 	 *
 	 * In-memory copy of all FPU registers that we save/restore

@@ -250,7 +250,6 @@ static void fpu_copy(struct fpu *dst_fpu
 
 int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
 {
-	dst_fpu->counter = 0;
 	dst_fpu->fpregs_active = 0;
 	dst_fpu->last_cpu = -1;
 

@@ -353,7 +352,6 @@ void fpu__restore(struct fpu *fpu)
 	kernel_fpu_disable();
 	fpregs_activate(fpu);
 	copy_kernel_to_fpregs(&fpu->state);
-	fpu->counter++;
 	kernel_fpu_enable();
 }
 EXPORT_SYMBOL_GPL(fpu__restore);

@@ -370,7 +368,6 @@ EXPORT_SYMBOL_GPL(fpu__restore);
 void fpu__drop(struct fpu *fpu)
 {
 	preempt_disable();
-	fpu->counter = 0;
 
 	if (fpu->fpregs_active) {
 		/* Ignore delayed exceptions from user space */

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <[email protected]>

commit e63650840e8b053aa09ad934877e87e9941ed135 upstream.

Now that eagerfpu= is gone, remove it from the docs and some comments. Also sync the changes to tools/.

---
 Documentation/kernel-parameters.txt |    5 -----
 arch/x86/include/asm/cpufeatures.h  |    1 -
 arch/x86/include/asm/fpu/types.h    |   23 -----------------------
 3 files changed, 29 deletions(-)

@@ -961,11 +961,6 @@ bytes respectively. Such letter suffixes
 			See Documentation/x86/intel_mpx.txt for more
 			information about the feature.
 
-	eagerfpu=	[X86]
-			on	enable eager fpu restore
-			off	disable eager fpu restore
-			auto	selects the default scheme, which automatically
-				enables eagerfpu restore for xsaveopt.
 
 	module.async_probe [KNL]
 			Enable asynchronous probe on this module.

@@ -104,7 +104,6 @@
 #define X86_FEATURE_EXTD_APICID	( 3*32+26) /* has extended APICID (8 bits) */
 #define X86_FEATURE_AMD_DCM     ( 3*32+27) /* multi-node processor */
 #define X86_FEATURE_APERFMPERF	( 3*32+28) /* APERFMPERF */
-/* free, was #define X86_FEATURE_EAGER_FPU	( 3*32+29) * "eagerfpu" Non lazy FPU restore */
 #define X86_FEATURE_NONSTOP_TSC_S3 ( 3*32+30) /* TSC doesn't stop in S3 state */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */

@@ -310,29 +310,6 @@ struct fpu {
 	 * the registers in the FPU are more recent than this state
 	 * copy. If the task context-switches away then they get
 	 * saved here and represent the FPU state.
-	 *
-	 * After context switches there may be a (short) time period
-	 * during which the in-FPU hardware registers are unchanged
-	 * and still perfectly match this state, if the tasks
-	 * scheduled afterwards are not using the FPU.
-	 *
-	 * This is the 'lazy restore' window of optimization, which
-	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
-	 *
-	 * We detect whether a subsequent task uses the FPU via setting
-	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
-	 *
-	 * During this window, if the task gets scheduled again, we
-	 * might be able to skip having to do a restore from this
-	 * memory buffer to the hardware registers - at the cost of
-	 * incurring the overhead of #NM fault traps.
-	 *
-	 * Note that on modern CPUs that support the XSAVEOPT (or other
-	 * optimized XSAVE instructions), we don't use #NM traps anymore,
-	 * as the hardware can track whether FPU registers need saving
-	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
-	 * logic, which unconditionally saves/restores all FPU state
-	 * across context switches. (if FPU state exists.)
 	 */
 	union fpregs_state		state;
 	/*

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jozef Balga <[email protected]>

[ Upstream commit 312f73b648626a0526a3aceebb0a3192aaba05ce ]

When less than 3 bytes are written to the device, memcpy is called with negative array size which leads to buffer overflow and kernel panic. This patch adds a condition and returns -EOPNOTSUPP instead.
Fixes bugzilla issue 64871

[[email protected]: fix a merge conflict and changed the
condition to match the patch's comment, e. g. len == 3 could also be valid]

---
 drivers/media/usb/dvb-usb-v2/af9035.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -389,8 +389,10 @@ static int af9035_i2c_master_xfer(struct
 			    msg[0].addr == (state->af9033_i2c_addr[1] >> 1))
 				reg |= 0x100000;
 
-			ret = af9035_wr_regs(d, reg, &msg[0].buf[3],
-					msg[0].len - 3);
+			ret = (msg[0].len >= 3) ? af9035_wr_regs(d, reg,
+							         &msg[0].buf[3],
+							         msg[0].len - 3)
+					        : -EOPNOTSUPP;
 		} else {
 			/* I2C write */
 			u8 buf[MAX_XFER_SIZE];

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keerthy <[email protected]>

[ Upstream commit 3b7d96a0dbb6b630878597a1838fc39f808b761b ]

The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs.

---
 drivers/clocksource/timer-ti-32k.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -98,6 +98,9 @@ static void __init ti_32k_timer_init(str
 		return;
 	}
 
+	if (!of_machine_is_compatible("ti,am43"))
+		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+
 	ti_32k_timer.counter = ti_32k_timer.base;
 
 	/*

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Schwab <[email protected]>

[ Upstream commit 9e62df51be993035c577371ffee5477697a56aad ]

Fix errors in Atari keymap (mostly in keypad, help and undo keys).

Patch provided on debian-68k ML by Andreas Schwab <[email protected]>, keymap array size and unhandled scancode limit adjusted to 0x73 by me.

---
 drivers/input/keyboard/atakbd.c |   64 ++++++++++++++++------------------------
 1 file changed, 26 insertions(+), 38 deletions(-)

@@ -79,8 +79,7 @@ MODULE_LICENSE("GPL");
  */
 
 
-static unsigned char atakbd_keycode[0x72] = {	/* American layout */
-	[0]	 = KEY_GRAVE,
+static unsigned char atakbd_keycode[0x73] = {	/* American layout */
 	[1]	 = KEY_ESC,
 	[2]	 = KEY_1,
 	[3]	 = KEY_2,

@@ -121,9 +120,9 @@ static unsigned char atakbd_keycode[0x72
 	[38]	 = KEY_L,
 	[39]	 = KEY_SEMICOLON,
 	[40]	 = KEY_APOSTROPHE,
-	[41]	 = KEY_BACKSLASH,	/* FIXME, '#' */
+	[41]	 = KEY_GRAVE,
 	[42]	 = KEY_LEFTSHIFT,
-	[43]	 = KEY_GRAVE,		/* FIXME: '~' */
+	[43]	 = KEY_BACKSLASH,
 	[44]	 = KEY_Z,
 	[45]	 = KEY_X,
 	[46]	 = KEY_C,

@@ -149,45 +148,34 @@ static unsigned char atakbd_keycode[0x72
 	[66]	 = KEY_F8,
 	[67]	 = KEY_F9,
 	[68]	 = KEY_F10,
-	[69]	 = KEY_ESC,
-	[70]	 = KEY_DELETE,
-	[71]	 = KEY_KP7,
-	[72]	 = KEY_KP8,
-	[73]	 = KEY_KP9,
+	[71]	 = KEY_HOME,
+	[72]	 = KEY_UP,
 	[74]	 = KEY_KPMINUS,
-	[75]	 = KEY_KP4,
-	[76]	 = KEY_KP5,
-	[77]	 = KEY_KP6,
+	[75]	 = KEY_LEFT,
+	[77]	 = KEY_RIGHT,
 	[78]	 = KEY_KPPLUS,
-	[79]	 = KEY_KP1,
-	[80]	 = KEY_KP2,
-	[81]	 = KEY_KP3,
-	[82]	 = KEY_KP0,
-	[83]	 = KEY_KPDOT,
-	[90]	 = KEY_KPLEFTPAREN,
-	[91]	 = KEY_KPRIGHTPAREN,
-	[92]	 = KEY_KPASTERISK,	/* FIXME */
-	[93]	 = KEY_KPASTERISK,
-	[94]	 = KEY_KPPLUS,
-	[95]	 = KEY_HELP,
+	[80]	 = KEY_DOWN,
+	[82]	 = KEY_INSERT,
+	[83]	 = KEY_DELETE,
 	[96]	 = KEY_102ND,
-	[97]	 = KEY_KPASTERISK,	/* FIXME */
-	[98]	 = KEY_KPSLASH,
+	[97]	 = KEY_UNDO,
+	[98]	 = KEY_HELP,
 	[99]	 = KEY_KPLEFTPAREN,
 	[100]	 = KEY_KPRIGHTPAREN,
 	[101]	 = KEY_KPSLASH,
 	[102]	 = KEY_KPASTERISK,
-	[103]	 = KEY_UP,
-	[104]	 = KEY_KPASTERISK,	/* FIXME */
-	[105]	 = KEY_LEFT,
-	[106]	 = KEY_RIGHT,
-	[107]	 = KEY_KPASTERISK,	/* FIXME */
-	[108]	 = KEY_DOWN,
-	[109]	 = KEY_KPASTERISK,	/* FIXME */
-	[110]	 = KEY_KPASTERISK,	/* FIXME */
-	[111]	 = KEY_KPASTERISK,	/* FIXME */
-	[112]	 = KEY_KPASTERISK,	/* FIXME */
-	[113]	 = KEY_KPASTERISK	/* FIXME */
+	[103]	 = KEY_KP7,
+	[104]	 = KEY_KP8,
+	[105]	 = KEY_KP9,
+	[106]	 = KEY_KP4,
+	[107]	 = KEY_KP5,
+	[108]	 = KEY_KP6,
+	[109]	 = KEY_KP1,
+	[110]	 = KEY_KP2,
+	[111]	 = KEY_KP3,
+	[112]	 = KEY_KP0,
+	[113]	 = KEY_KPDOT,
+	[114]	 = KEY_KPENTER,
 };
 
 static struct input_dev *atakbd_dev;

@@ -195,7 +183,7 @@ static struct input_dev *atakbd_dev;
 static void atakbd_interrupt(unsigned char scancode, char down)
 {
 
-	if (scancode < 0x72) {		/* scancodes < 0xf2 are keys */
+	if (scancode < 0x73) {		/* scancodes < 0xf3 are keys */
 
 		// report raw events here?
 

@@ -209,7 +197,7 @@ static void atakbd_interrupt(unsigned ch
 			input_report_key(atakbd_dev, scancode, down);
 			input_sync(atakbd_dev);
 		}
-	} else				/* scancodes >= 0xf2 are mouse data, most likely */
+	} else				/* scancodes >= 0xf3 are mouse data, most likely */
 		printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode);
 
 	return;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Schmitz <[email protected]>

[ Upstream commit 52d2c7bf7c90217fbe875d2d76f310979c48eb83 ]

The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes.

Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key.

---
 drivers/input/keyboard/atakbd.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

@@ -189,14 +189,8 @@ static void atakbd_interrupt(unsigned ch
 
 		scancode = atakbd_keycode[scancode];
 
-		if (scancode == KEY_CAPSLOCK) {	/* CapsLock is a toggle switch key on Amiga */
-			input_report_key(atakbd_dev, scancode, 1);
-			input_report_key(atakbd_dev, scancode, 0);
-			input_sync(atakbd_dev);
-		} else {
-			input_report_key(atakbd_dev, scancode, down);
-			input_sync(atakbd_dev);
-		}
+		input_report_key(atakbd_dev, scancode, down);
+		input_sync(atakbd_dev);
 	} else				/* scancodes >= 0xf3 are mouse data, most likely */
 		printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode);
 

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nathan Chancellor <[email protected]>

[ Upstream commit 8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 ]

Clang warns that the address of a pointer will always evaluated as true in a boolean context:

drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion]

        if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
            ~~~~~^~~~~~~~~~~~~

1 warning generated.

Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning.

---
 drivers/net/ethernet/mellanox/mlx4/eq.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -228,7 +228,8 @@ static void mlx4_set_eq_affinity_hint(st
 	struct mlx4_dev *dev = &priv->dev;
 	struct mlx4_eq *eq = &priv->eq_table.eq[vec];
 
-	if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask))
+	if (!cpumask_available(eq->affinity_mask) ||
+	    cpumask_empty(eq->affinity_mask))
 		return;
 
 	hint_err = irq_set_affinity_hint(eq->irq, eq->affinity_mask);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Cowgill <[email protected]>

[ Upstream commit 57a489786de9ec37d6e25ef1305dc337047f0236 ]

Building a riscv kernel with CONFIG_FUNCTION_TRACER and CONFIG_MODVERSIONS enabled results in these two warnings:

MODPOST vmlinux.o
WARNING: EXPORT symbol "return_to_handler" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.

When exporting symbols from an assembly file, the MODVERSIONS code requires their prototypes to be defined in asm-prototypes.h (see scripts/Makefile.build). Since both of these symbols have prototypes defined in linux/ftrace.h, include this header from RISC-V's asm-prototypes.h.

---
 arch/riscv/include/asm/asm-prototypes.h |    7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 arch/riscv/include/asm/asm-prototypes.h

@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_RISCV_PROTOTYPES_H
+
+#include <linux/ftrace.h>
+#include <asm-generic/asm-prototypes.h>
+
+#endif /* _ASM_RISCV_PROTOTYPES_H */

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Neuling <[email protected]>

[ Upstream commit cf13435b730a502e814c63c84d93db131e563f5f ]

When we treclaim we store the userspace checkpointed r13 to a scratch SPR and then later save the scratch SPR to the user thread struct.

Unfortunately, this doesn't work as accessing the user thread struct can take an SLB fault and the SLB fault handler will write the same scratch SPRG that now contains the userspace r13.

To fix this, we store r13 to the kernel stack (which can't fault) before we access the user thread struct.

Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen as a random userspace segfault with r13 looking like a kernel address.

---
 arch/powerpc/kernel/tm.S |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

@@ -199,13 +199,20 @@ dont_backup_fp:
 	std	r1, PACATMSCRATCH(r13)
 	ld	r1, PACAR1(r13)
 
-	/* Store the PPR in r11 and reset to decent value */
 	std	r11, GPR11(r1)			/* Temporary stash */
 
+	/*
+	 * Store r13 away so we can free up the scratch SPR for the SLB fault
+	 * handler (needed once we start accessing the thread_struct).
+	 */
+	GET_SCRATCH0(r11)
+	std	r11, GPR13(r1)
+
 	/* Reset MSR RI so we can take SLB faults again */
 	li	r11, MSR_RI
 	mtmsrd	r11, 1
 
+	/* Store the PPR in r11 and reset to decent value */
 	mfspr	r11, SPRN_PPR
 	HMT_MEDIUM
 

@@ -234,7 +241,7 @@ dont_backup_fp:
 	ld	r4, GPR7(r1)			/* user r7 */
 	ld	r5, GPR11(r1)			/* user r11 */
 	ld	r6, GPR12(r1)			/* user r12 */
-	GET_SCRATCH0(8)				/* user r13 */
+	ld	r8, GPR13(r1)			/* user r13 */
 	std	r3, GPR1(r7)
 	std	r4, GPR7(r7)
 	std	r5, GPR11(r7)

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Neuling <[email protected]>

[ Upstream commit 96dc89d526ef77604376f06220e3d2931a0bfd58 ]

Current we store the userspace r1 to PACATMSCRATCH before finally saving it to the thread struct.

In theory an exception could be taken here (like a machine check or SLB miss) that could write PACATMSCRATCH and hence corrupt the userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but others do.

We've never actually seen this happen but it's theoretically possible. Either way, the code is fragile as it is.

This patch saves r1 to the kernel stack (which can't fault) before we turn MSR[RI] back on. PACATMSCRATCH is still used but only with MSR[RI] off. We then copy r1 from the kernel stack to the thread struct once we have MSR[RI] back on.

---
 arch/powerpc/kernel/tm.S |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

@@ -202,6 +202,13 @@ dont_backup_fp:
 	std	r11, GPR11(r1)			/* Temporary stash */
 
 	/*
+	 * Move the saved user r1 to the kernel stack in case PACATMSCRATCH is
+	 * clobbered by an exception once we turn on MSR_RI below.
+	 */
+	ld	r11, PACATMSCRATCH(r13)
+	std	r11, GPR1(r1)
+
+	/*
 	 * Store r13 away so we can free up the scratch SPR for the SLB fault
 	 * handler (needed once we start accessing the thread_struct).
 	 */

@@ -237,7 +244,7 @@ dont_backup_fp:
 	SAVE_GPR(8, r7)				/* user r8 */
 	SAVE_GPR(9, r7)				/* user r9 */
 	SAVE_GPR(10, r7)			/* user r10 */
-	ld	r3, PACATMSCRATCH(r13)		/* user r1 */
+	ld	r3, GPR1(r1)			/* user r1 */
 	ld	r4, GPR7(r1)			/* user r7 */
 	ld	r5, GPR11(r1)			/* user r11 */
 	ld	r6, GPR12(r1)			/* user r12 */

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Brodkin <[email protected]>

commit 615f64458ad890ef94abc879a66d8b27236e733a upstream.

This check is very naive: we simply test if GCC invoked without "-mcpu=XXX" has ARC700 define set. In that case we think that GCC was built with "--with-cpu=arc700" and has libgcc built for ARC700.

Otherwise if ARC700 is not defined we think that everythng was built for ARCv2.

But in reality our life is much more interesting.

1. Regardless of GCC configuration (i.e. what we pass in "--with-cpu" it may generate code for any ARC core).

2. libgcc might be built with explicitly specified "--mcpu=YYY"

That's exactly what happens in case of multilibbed toolchains:
- GCC is configured with default settings
- All the libs built for many different CPU flavors

I.e. that check gets in the way of usage of multilibbed toolchains. And even non-multilibbed toolchains are affected. OpenEmbedded also builds GCC without "--with-cpu" because each and every target component later is compiled with explicitly set "-mcpu=ZZZ".

---
 arch/arc/Makefile |   14 --------------
 1 file changed, 14 deletions(-)

@@ -18,20 +18,6 @@ cflags-y	+= -fno-common -pipe -fno-built
 cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
 cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=archs
 
-is_700 = $(shell $(CC) -dM -E - < /dev/null | grep -q "ARC700" && echo 1 || echo 0)
-
-ifdef CONFIG_ISA_ARCOMPACT
-ifeq ($(is_700), 0)
-    $(error Toolchain not configured for ARCompact builds)
-endif
-endif
-
-ifdef CONFIG_ISA_ARCV2
-ifeq ($(is_700), 1)
-    $(error Toolchain not configured for ARCv2 builds)
-endif
-endif
-
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register defintion, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Warren <[email protected]>

commit daa35bd95634a2a2d72d1049c93576a02711cb1a upstream.

When the gadget serial device has no associated TTY, do not pass any received data into the TTY layer for processing; simply drop it instead. This prevents the TTY layer from calling back into the gadget serial driver, which will then crash in e.g. gs_write_room() due to lack of gadget serial device to TTY association (i.e. a NULL pointer dereference).

---
 drivers/usb/gadget/function/u_serial.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -518,7 +518,7 @@ static void gs_rx_push(unsigned long _po
 		}
 
 		/* push data to (open) tty */
-		if (req->actual) {
+		if (req->actual && tty) {
 			char		*packet = req->buf;
 			unsigned	size = req->actual;
 			unsigned	n;

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: K. Y. Srinivasan <[email protected]>

commit 2d0c3b5ad739697a68dc8a444f5b9f4817cf8f8f upstream.

When the handshake with daemon is complete, we should poll the channel since during the handshake, we will not be processing any messages. This is a potential bug if the host is waiting for a response from the guest. I would like to thank Dexuan for pointing this out.

---
 drivers/hv/hv_kvp.c      |    2 +-
 drivers/hv/hv_snapshot.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

@@ -155,7 +155,7 @@ static int kvp_handle_handshake(struct h
 	pr_debug("KVP: userspace daemon ver. %d registered\n",
 		 KVP_OP_REGISTER);
 	kvp_register(dm_reg_value);
-	kvp_transaction.state = HVUTIL_READY;
+	hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper);
 
 	return 0;
 }

@@ -114,7 +114,7 @@ static int vss_handle_handshake(struct h
 	default:
 		return -EINVAL;
 	}
-	vss_transaction.state = HVUTIL_READY;
+	hv_poll_channel(vss_transaction.recv_channel, vss_poll_wrapper);
 	pr_debug("VSS: userspace daemon ver. %d registered\n", dm_reg_value);
 	return 0;
 }

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: K. Y. Srinivasan <[email protected]>

commit b9830d120cbe155863399f25eaef6aa8353e767f upstream.

Pass the channel information to the util drivers that need to defer reading the channel while they are processing a request. This would address the following issue reported by Vitaly:

Commit 3cace4a61610 ("Drivers: hv: utils: run polling callback always in interrupt context") removed direct *_transaction.state = HVUTIL_READY assignments from *_handle_handshake() functions introducing the following
race: if a userspace daemon connects before we get first non-negotiation request from the server hv_poll_channel() won't set transaction state to HVUTIL_READY as (!channel) condition will fail, we set it to non-NULL on the first real request from the server.

---
 drivers/hv/hv_fcopy.c    |    2 +-
 drivers/hv/hv_kvp.c      |    2 +-
 drivers/hv/hv_snapshot.c |    2 +-
 drivers/hv/hv_util.c     |    1 +
 include/linux/hyperv.h   |    1 +
 5 files changed, 5 insertions(+), 3 deletions(-)

@@ -256,7 +256,6 @@ void hv_fcopy_onchannelcallback(void *co
 		 */
 
 		fcopy_transaction.recv_len = recvlen;
-		fcopy_transaction.recv_channel = channel;
 		fcopy_transaction.recv_req_id = requestid;
 		fcopy_transaction.fcopy_msg = fcopy_msg;
 

@@ -323,6 +322,7 @@ static void fcopy_on_reset(void)
 int hv_fcopy_init(struct hv_util_service *srv)
 {
 	recv_buffer = srv->recv_buffer;
+	fcopy_transaction.recv_channel = srv->channel;
 
 	init_completion(&release_event);
 	/*

@@ -640,7 +640,6 @@ void hv_kvp_onchannelcallback(void *cont
 			 */
 
 			kvp_transaction.recv_len = recvlen;
-			kvp_transaction.recv_channel = channel;
 			kvp_transaction.recv_req_id = requestid;
 			kvp_transaction.kvp_msg = kvp_msg;
 

@@ -690,6 +689,7 @@ int
 hv_kvp_init(struct hv_util_service *srv)
 {
 	recv_buffer = srv->recv_buffer;
+	kvp_transaction.recv_channel = srv->channel;
 
 	init_completion(&release_event);
 	/*

@@ -264,7 +264,6 @@ void hv_vss_onchannelcallback(void *cont
 			 */
 
 			vss_transaction.recv_len = recvlen;
-			vss_transaction.recv_channel = channel;
 			vss_transaction.recv_req_id = requestid;
 			vss_transaction.msg = (struct hv_vss_msg *)vss_msg;
 

@@ -340,6 +339,7 @@ hv_vss_init(struct hv_util_service *srv)
 		return -ENOTSUPP;
 	}
 	recv_buffer = srv->recv_buffer;
+	vss_transaction.recv_channel = srv->channel;
 
 	/*
 	 * When this driver loads, the user level daemon that

@@ -326,6 +326,7 @@ static int util_probe(struct hv_device *
 	srv->recv_buffer = kmalloc(PAGE_SIZE * 4, GFP_KERNEL);
 	if (!srv->recv_buffer)
 		return -ENOMEM;
+	srv->channel = dev->channel;
 	if (srv->util_init) {
 		ret = srv->util_init(srv);
 		if (ret) {

@@ -1179,6 +1179,7 @@ int vmbus_allocate_mmio(struct resource
 
 struct hv_util_service {
 	u8 *recv_buffer;
+	void *channel;
 	void (*util_cb)(void *);
 	int (*util_init)(struct hv_util_service *);
 	void (*util_deinit)(void);

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vitaly Kuznetsov <[email protected]>

commit 4dbfc2e68004c60edab7e8fd26784383dd3ee9bc upstream.

Hyper-V VMs can be replicated to another hosts and there is a feature to set different IP for replicas, it is called 'Failover TCP/IP'. When such guest starts Hyper-V host sends it KVP_OP_SET_IP_INFO message as soon as we finish negotiation procedure. The problem is that it can happen (and it actually happens) before userspace daemon connects and we reply with HV_E_FAIL to the message. As there are no repetitions we fail to set the requested IP.

Solve the issue by postponing our reply to the negotiation message till userspace daemon is connected. We can't wait too long as there is a host-side timeout (cca. 75 seconds) and if we fail to reply in this time frame the whole KVP service will become inactive. The solution is not ideal - if it takes userspace daemon more than 60 seconds to connect IP Failover will still fail but I don't see a solution with our current separation between kernel and userspace parts.

Other two modules (VSS and FCOPY) don't require such delay, leave them untouched.

---
 drivers/hv/hv_kvp.c       |   31 +++++++++++++++++++++++++++++++
 drivers/hv/hyperv_vmbus.h |    5 +++++
 2 files changed, 36 insertions(+)

@@ -78,9 +78,11 @@ static void kvp_send_key(struct work_str
 
 static void kvp_respond_to_host(struct hv_kvp_msg *msg, int error);
 static void kvp_timeout_func(struct work_struct *dummy);
+static void kvp_host_handshake_func(struct work_struct *dummy);
 static void kvp_register(int);
 
 static DECLARE_DELAYED_WORK(kvp_timeout_work, kvp_timeout_func);
+static DECLARE_DELAYED_WORK(kvp_host_handshake_work, kvp_host_handshake_func);
 static DECLARE_WORK(kvp_sendkey_work, kvp_send_key);
 
 static const char kvp_devname[] = "vmbus/hv_kvp";

@@ -131,6 +133,11 @@ static void kvp_timeout_func(struct work
 	hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper);
 }
 
+static void kvp_host_handshake_func(struct work_struct *dummy)
+{
+	hv_poll_channel(kvp_transaction.recv_channel, hv_kvp_onchannelcallback);
+}
+
 static int kvp_handle_handshake(struct hv_kvp_msg *msg)
 {
 	switch (msg->kvp_hdr.operation) {

@@ -155,6 +162,12 @@ static int kvp_handle_handshake(struct h
 	pr_debug("KVP: userspace daemon ver. %d registered\n",
 		 KVP_OP_REGISTER);
 	kvp_register(dm_reg_value);
+
+	/*
+	 * If we're still negotiating with the host cancel the timeout
+	 * work to not poll the channel twice.
+	 */
+	cancel_delayed_work_sync(&kvp_host_handshake_work);
 	hv_poll_channel(kvp_transaction.recv_channel, kvp_poll_wrapper);
 
 	return 0;

@@ -595,7 +608,22 @@ void hv_kvp_onchannelcallback(void *cont
 	struct icmsg_negotiate *negop = NULL;
 	int util_fw_version;
 	int kvp_srv_version;
+	static enum {NEGO_NOT_STARTED,
+		     NEGO_IN_PROGRESS,
+		     NEGO_FINISHED} host_negotiatied = NEGO_NOT_STARTED;
 
+	if (host_negotiatied == NEGO_NOT_STARTED &&
+	    kvp_transaction.state < HVUTIL_READY) {
+		/*
+		 * If userspace daemon is not connected and host is asking
+		 * us to negotiate we need to delay to not lose messages.
+		 * This is important for Failover IP setting.
+		 */
+		host_negotiatied = NEGO_IN_PROGRESS;
+		schedule_delayed_work(&kvp_host_handshake_work,
+				      HV_UTIL_NEGO_TIMEOUT * HZ);
+		return;
+	}
 	if (kvp_transaction.state > HVUTIL_READY)
 		return;
 

@@ -673,6 +701,8 @@ void hv_kvp_onchannelcallback(void *cont
 		vmbus_sendpacket(channel, recv_buffer,
 				       recvlen, requestid,
 				       VM_PKT_DATA_INBAND, 0);
+
+		host_negotiatied = NEGO_FINISHED;
 	}
 
 }

@@ -711,6 +741,7 @@ hv_kvp_init(struct hv_util_service *srv)
 void hv_kvp_deinit(void)
 {
 	kvp_transaction.state = HVUTIL_DEVICE_DYING;
+	cancel_delayed_work_sync(&kvp_host_handshake_work);
 	cancel_delayed_work_sync(&kvp_timeout_work);
 	cancel_work_sync(&kvp_sendkey_work);
 	hvutil_transport_destroy(hvt);

@@ -36,6 +36,11 @@
 #define HV_UTIL_TIMEOUT 30
 
 /*
+ * Timeout for guest-host handshake for services.
+ */
+#define HV_UTIL_NEGO_TIMEOUT 60
+
+/*
  * The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
  * is set by CPUID(HVCPUID_VERSION_FEATURES).
  */

4.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Long Li <[email protected]>

commit a3ade8cc474d848676278660e65f5af1e9e094d9 upstream.

The host may send multiple negotiation packets
(due to timeout) before the KVP user-mode daemon
is connected. KVP user-mode daemon is connected.
We need to defer processing those packets
until the daemon is negotiated and connected.
It's okay for guest to respond
to all negotiation packets.

In addition, the host may send multiple staged KVP requests as soon as negotiation is done. We need to properly process those packets using one tasklet for exclusive access to ring buffer.

This patch is based on the work of
Nick Meier <[email protected]>.

The above is the original changelog of
a3ade8cc474d ("HV: properly delay KVP packets when negotiation is in progress"

Here I re-worked the original patch because the mainline version can't work for the linux-4.4.y branch, on which channel->callback_event doesn't exist yet. In the mainline, channel->callback_event was added by:
631e63a9f346 ("vmbus: change to per channel tasklet"). Here we don't want to backport it to v4.4, as it requires extra supporting changes and fixes, which are unnecessary as to the KVP bug we're trying to resolve.

NOTE: before this patch is used, we should cherry-pick the other related 3 patches from the mainline first:

The background of this backport request is that: recently Wang Jian reported some KVP issues: https://github.com/LIS/lis-next/issues/593:
e.g. the /var/lib/hyperv/.kvp_pool_* files can not be updated, and sometimes if the hv_kvp_daemon doesn't timely start, the host may not be able to query the VM's IP address via KVP.

---
 drivers/hv/hv_kvp.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

@@ -612,21 +612,22 @@ void hv_kvp_onchannelcallback(void *cont
 		     NEGO_IN_PROGRESS,
 		     NEGO_FINISHED} host_negotiatied = NEGO_NOT_STARTED;
 
-	if (host_negotiatied == NEGO_NOT_STARTED &&
-	    kvp_transaction.state < HVUTIL_READY) {
+	if (kvp_transaction.state < HVUTIL_READY) {
 		/*
 		 * If userspace daemon is not connected and host is asking
 		 * us to negotiate we need to delay to not lose messages.
 		 * This is important for Failover IP setting.
 		 */
-		host_negotiatied = NEGO_IN_PROGRESS;
-		schedule_delayed_work(&kvp_host_handshake_work,
+		if (host_negotiatied == NEGO_NOT_STARTED) {
+			host_negotiatied = NEGO_IN_PROGRESS;
+			schedule_delayed_work(&kvp_host_handshake_work,
 				      HV_UTIL_NEGO_TIMEOUT * HZ);
+		}
 		return;
 	}
 	if (kvp_transaction.state > HVUTIL_READY)
 		return;
-
+recheck:
 	vmbus_recvpacket(channel, recv_buffer, PAGE_SIZE * 4, &recvlen,
 			 &requestid);
 

@@ -703,6 +704,8 @@ void hv_kvp_onchannelcallback(void *cont
 				       VM_PKT_DATA_INBAND, 0);
 
 		host_negotiatied = NEGO_FINISHED;
+
+		goto recheck;
 	}
 
 }

Merged, compiled with -Werror, and installed onto my Pixel 2 XL.

No initial issues noticed in dmesg or general usage.

Thanks!
Nathan

4.4, 4.9 and 4.14 contain a new file named arch/riscv/include/asm/asm-prototypes.h

this doesnt seem to belong to these kernels since arch/riscv was not even present before

Sebastian

Am 18.10.2018 um 19:54 schrieb Greg Kroah-Hartman:

Good catch, patch now dropped from all of those trees.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.162-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 3918330d8012ab71d8ad89c6a3465a729ad1d61e
git describe: v4.4.161-49-g3918330d8012
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.161-49-g3918330d8012

No regressions (compared to build v4.4.161)

No fixes (compared to build v4.4.161)

Ran 16804 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

Summary
------------------------------------------------------------------------

kernel: 4.4.162-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.162-rc1-hikey-20181018-306
git commit: 0264de6b9902e4883d60b75867d85ab348dafb53
git describe: 4.4.162-rc1-hikey-20181018-306
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.162-rc1-hikey-20181018-306

No regressions (compared to build 4.4.161-rc1-hikey-20181011-301)

No fixes (compared to build 4.4.161-rc1-hikey-20181011-301)