New board: FriendlyARM NanoPi Duo
PATCH 1/1 New board: FriendlyARM NanoPi Duo
Introduce a new board the FriendlyARM NanoPi Duo.
- Due to the missing defconfigs and DTS in the mainline kernel and uboot, I used the ones from the FriendlyARM github page.
- Most of the configuration was copied from the other friendlyarm boards.
Signed-off-by Sven Haardiek <[email protected]>
--- board/friendlyarm/nanopi-duo/boot.cmd | 8 ++++++ board/friendlyarm/nanopi-duo/genimage.cfg | 33 +++++++++++++++++++++ board/friendlyarm/nanopi-duo/readme.txt | 35 +++++++++++++++++++++++ configs/friendlyarm_nanopi_duo_defconfig | 31 ++++++++++++++++++++ 4 files changed, 107 insertions(+) create mode 100644 board/friendlyarm/nanopi-duo/boot.cmd create mode 100644 board/friendlyarm/nanopi-duo/genimage.cfg create mode 100644 board/friendlyarm/nanopi-duo/readme.txt create mode 100644 configs/friendlyarm_nanopi_duo_defconfig
board/friendlyarm/nanopi-duo/boot.cmd new file +8 -0
@@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rootwait + +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h2-plus-nanopi-duo.dtb + +bootz $kernel_addr_r - $fdt_addr_r
board/friendlyarm/nanopi-duo/genimage.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h2-plus-nanopi-duo.dtb", + "boot.scr" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +}
board/friendlyarm/nanopi-duo/readme.txt new file +35 -0
@@ -0,0 +1,35 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Nanopi DUO. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Nanopi DUO link: +http://www.nanopi.org/Nanopi-Duo_Feature.html + +Wiki link: +http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo + +How to build +============ + + $ make friendlyarm_nanopi_duo_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Nanopi DUO and power it up. The console is on +the serial line, 115200 8N1.
configs/friendlyarm_nanopi_duo_defconfig new file +31 -0
@@ -0,0 +1,31 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="nanopi-duo" +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi DUO" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-duo/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/friendlyarm/linux.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="sunxi-4.16.y" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-nanopi-duo" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/friendlyarm/u-boot.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="sunxi-v2017.x" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_h3" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-duo/boot.cmd" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y
Signature · 1 line
2.17.0
PATCH 1/1 New board: FriendlyARM NanoPi Duo
Hi,
I am about to get hands on a NanoPi Duo, and I am interested in buildroot support. Searching in the archives, I see no answer or discussion about this patch. Is there any reason that it has not been discussed or merged ? Or has it been discussed elsewhere ? Regards,
Le jeu. 19 avr. 2018 ? 11:52, Sven Haardiek <[email protected]> a ?crit :
Quoted 154 lines
Introduce a new board the FriendlyARM NanoPi Duo.
- Due to the missing defconfigs and DTS in the mainline kernel and uboot, I used the ones from the FriendlyARM github page.
- Most of the configuration was copied from the other friendlyarm boards.
Signed-off-by Sven Haardiek <[email protected]>--- board/friendlyarm/nanopi-duo/boot.cmd | 8 ++++++ board/friendlyarm/nanopi-duo/genimage.cfg | 33 +++++++++++++++++++++ board/friendlyarm/nanopi-duo/readme.txt | 35 +++++++++++++++++++++++ configs/friendlyarm_nanopi_duo_defconfig | 31 ++++++++++++++++++++ 4 files changed, 107 insertions(+) create mode 100644 board/friendlyarm/nanopi-duo/boot.cmd create mode 100644 board/friendlyarm/nanopi-duo/genimage.cfg create mode 100644 board/friendlyarm/nanopi-duo/readme.txt create mode 100644 configs/friendlyarm_nanopi_duo_defconfigboard/friendlyarm/nanopi-duo/boot.cmd new file +8
-0@@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rootwait + +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h2-plus-nanopi-duo.dtb + +bootz $kernel_addr_r - $fdt_addr_rboard/friendlyarm/nanopi-duo/genimage.cfg new file +33
-0@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h2-plus-nanopi-duo.dtb", + "boot.scr" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +}board/friendlyarm/nanopi-duo/readme.txt new file +35
-0@@ -0,0 +1,35 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Nanopi DUO. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Nanopi DUO link: +http://www.nanopi.org/Nanopi-Duo_Feature.html + +Wiki link: +http://wiki.friendlyarm.com/wiki/index.php/NanoPi_Duo + +How to build +============ + + $ make friendlyarm_nanopi_duo_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Nanopi DUO and power it up. The console is on +the serial line, 115200 8N1.configs/friendlyarm_nanopi_duo_defconfig new file +31
-1@@ -0,0 +1,31 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_FPU_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="nanopi-duo" +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi DUO" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-duo/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/friendlyarm/linux.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="sunxi-4.16.y" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-nanopi-duo" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/friendlyarm/u-boot.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="sunxi-v2017.x" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_h3" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-duo/boot.cmd" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y --2.17.0
Quoted 4 lines
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
--
Alexis Lothor?
06.51.59.81.45
PATCH 1/1 New board: FriendlyARM NanoPi Duo
In reply to Sven HaardiekHello Sven,
Quoted 8 lines · Sven Haardiek
Introduce a new board the FriendlyARM NanoPi Duo.
- Due to the missing defconfigs and DTS in the mainline kernel and uboot, I used the ones from the FriendlyARM github page.
- Most of the configuration was copied from the other friendlyarm boards.
Signed-off-by Sven Haardiek <[email protected]>
Thanks a lot for your contribution, and sorry for the very, very slow response time. I'll add below a few comments, generally fairly minor. If you could fix them, and submit an updated version of your patch, it would be very nice.
First, the commit title should be something like this:
configs/friendlyarm_nanopi_duo: new defconfig
Also, the DEVELOPERS file should be updated to add an entry that associates your name/email with the defconfig and board directory.
board/friendlyarm/nanopi-duo/genimage.cfg line 6
Quoted 12 lines
board/friendlyarm/nanopi-duo/genimage.cfg new file +6
-0@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h2-plus-nanopi-duo.dtb", + "boot.scr"
The indentation looks odd here.
Quoted 7 lines
configs/friendlyarm_nanopi_duo_defconfig new file +1
-0@@ -0,0 +1,31 @@ +BR2_arm=y
configs/friendlyarm_nanopi_duo_defconfig line 11
Quoted 10 lines
configs/friendlyarm_nanopi_duo_defconfig new file +10
-0+BR2_cortex_a7=y +BR2_ARM_FPU_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="nanopi-duo" +BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi DUO" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-duo/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/friendlyarm/linux.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="sunxi-4.16.y"
Please use a tag or exact SHA1 so that the build is reproducible.
configs/friendlyarm_nanopi_duo_defconfig line 21
Quoted 3 lines
configs/friendlyarm_nanopi_duo_defconfig new file +3
-0+BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/friendlyarm/u-boot.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="sunxi-v2017.x"
Here as well.
Other than that, looks good to me! Could you send an updated version?
Thanks a lot,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com