Skip to contentSkip to conversation

staging: iio: ad2s1210: Switch to the gpio descriptor interface

PATCH Superseded Nishad Kamdar 2 participants 3 messages Oct 23, 2018 – Oct 24, 2018

Subsystems (4)

v3 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 staging: iio: ad2s1210: Switch to the gpio descriptor interface

Use the gpiod interface instead of the deprecated old non-descriptor interface.

---
Changes in v3:
- Use a pointer to pointer for gpio_desc in struct ad2s1210_gpio as it will be used to modify a pointer.
- Use dot notation to initialize the structure.
- Use a pointer variable to avoid writing gpios[i].
Changes in v2:
- Use the spi_device struct embedded in st instead of passing it as an argument to ad2s1210_setup_gpios().
- Use an array of structs to reduce redundant code in in ad2s1210_setup_gpios().
- Remove ad2s1210_free_gpios() as devm API is being used.

---
 drivers/staging/iio/resolver/ad2s1210.c | 92 ++++++++++++++-----------
 drivers/staging/iio/resolver/ad2s1210.h |  3 -
 2 files changed, 50 insertions(+), 45 deletions(-)
drivers/staging/iio/resolver/ad2s1210.c +50 -42
index ac13b99bd9cb..fbf0cc722979 100644
@@ -15,7 +15,7 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 
 #include <linux/iio/iio.h>
@@ -69,10 +69,21 @@ enum ad2s1210_mode {
 
 static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 };
 
+struct ad2s1210_gpio {
+	struct gpio_desc **ptr;
+	const char *name;
+	unsigned long flags;
+};
+
 struct ad2s1210_state {
 	const struct ad2s1210_platform_data *pdata;
 	struct mutex lock;
 	struct spi_device *sdev;
+	struct gpio_desc *sample;
+	struct gpio_desc *a0;
+	struct gpio_desc *a1;
+	struct gpio_desc *res0;
+	struct gpio_desc *res1;
 	unsigned int fclkin;
 	unsigned int fexcit;
 	bool hysteresis;
@@ -91,8 +102,8 @@ static const int ad2s1210_mode_vals[4][2] = {
 static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,
 				     struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->a[0], ad2s1210_mode_vals[mode][0]);
-	gpio_set_value(st->pdata->a[1], ad2s1210_mode_vals[mode][1]);
+	gpiod_set_value(st->a0, ad2s1210_mode_vals[mode][0]);
+	gpiod_set_value(st->a1, ad2s1210_mode_vals[mode][1]);
 	st->mode = mode;
 }
 
@@ -152,8 +163,8 @@ int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
 
 static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state *st)
 {
-	int resolution = (gpio_get_value(st->pdata->res[0]) << 1) |
-			  gpio_get_value(st->pdata->res[1]);
+	int resolution = (gpiod_get_value(st->res0) << 1) |
+			  gpiod_get_value(st->res1);
 
 	return ad2s1210_resolution_value[resolution];
 }
@@ -164,10 +175,10 @@ static const int ad2s1210_res_pins[4][2] = {
 
 static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->res[0],
-		       ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
-	gpio_set_value(st->pdata->res[1],
-		       ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
+	gpiod_set_value(st->res0,
+			ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
+	gpiod_set_value(st->res1,
+			ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
 }
 
 static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
@@ -401,15 +412,15 @@ static ssize_t ad2s1210_clear_fault(struct device *dev,
 	int ret;
 
 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->sample, 0);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 1);
 	ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
 	if (ret < 0)
 		goto error_ret;
-	gpio_set_value(st->pdata->sample, 0);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 0);
+	gpiod_set_value(st->sample, 1);
 error_ret:
 	mutex_unlock(&st->lock);
 
@@ -466,7 +477,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	s16 vel;
 
 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->sample, 0);
 	/* delay (6 * tck + 20) nano seconds */
 	udelay(1);
 
@@ -512,7 +523,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	}
 
 error_ret:
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 1);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
 	mutex_unlock(&st->lock);
@@ -630,30 +641,32 @@ static const struct iio_info ad2s1210_info = {
 
 static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
 {
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
+	int ret, i;
+	struct spi_device *spi = st->sdev;
+	struct ad2s1210_gpio *pin;
+	unsigned long flags = st->pdata->gpioin ? GPIOD_IN : GPIOD_OUT_LOW;
+
+	struct ad2s1210_gpio gpios[] = {
+		{.ptr = &st->sample, .name = "sample", .flags = GPIOD_IN},
+		{.ptr = &st->a0, .name = "a0", .flags = flags},
+		{.ptr = &st->a1, .name = "a1", .flags = flags},
+		{.ptr = &st->res0, .name = "res0", .flags = flags},
+		{.ptr = &st->res1, .name = "res1", .flags = flags},
 	};
 
-	return gpio_request_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
-}
-
-static void ad2s1210_free_gpios(struct ad2s1210_state *st)
-{
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
-	};
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		pin = &gpios[i];
+		*pin->ptr = devm_gpiod_get(&spi->dev, pin->name,
+					   pin->flags);
+		if (IS_ERR(pin->ptr)) {
+			ret = PTR_ERR(pin->ptr);
+			dev_err(&spi->dev, "Failed to request %s GPIO: %d\n",
+				pin->name, ret);
+			return ret;
+		}
+	}
 
-	gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
+	return 0;
 }
 
 static int ad2s1210_probe(struct spi_device *spi)
@@ -692,7 +705,7 @@ static int ad2s1210_probe(struct spi_device *spi)
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_gpios;
+		return ret;
 
 	st->fclkin = spi->max_speed_hz;
 	spi->mode = SPI_MODE_3;
@@ -700,10 +713,6 @@ static int ad2s1210_probe(struct spi_device *spi)
 	ad2s1210_initial(st);
 
 	return 0;
-
-error_free_gpios:
-	ad2s1210_free_gpios(st);
-	return ret;
 }
 
 static int ad2s1210_remove(struct spi_device *spi)
@@ -711,7 +720,6 @@ static int ad2s1210_remove(struct spi_device *spi)
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 
 	iio_device_unregister(indio_dev);
-	ad2s1210_free_gpios(iio_priv(indio_dev));
 
 	return 0;
 }
drivers/staging/iio/resolver/ad2s1210.h +0 -3
index e9b2147701fc..63d479b20a6c 100644
@@ -12,9 +12,6 @@
 #define _AD2S1210_H
 
 struct ad2s1210_platform_data {
-	unsigned int		sample;
-	unsigned int		a[2];
-	unsigned int		res[2];
 	bool			gpioin;
 };
 #endif /* _AD2S1210_H */
Signature · 1 line
2.17.1
#1 lore raw
Quoted 2 lines · Nishad Kamdar

Use the gpiod interface instead of the deprecated old non-descriptor interface.

Hi Nishad

Few more comments from me below.

Quoted 142 lines

---
Changes in v3:
- Use a pointer to pointer for gpio_desc in struct ad2s1210_gpio as it will be used to modify a pointer.
- Use dot notation to initialize the structure.
- Use a pointer variable to avoid writing gpios[i].
Changes in v2:
- Use the spi_device struct embedded in st instead of passing it as an argument to ad2s1210_setup_gpios().
- Use an array of structs to reduce redundant code in in ad2s1210_setup_gpios().
- Remove ad2s1210_free_gpios() as devm API is being used.

---
 drivers/staging/iio/resolver/ad2s1210.c | 92 ++++++++++++++-----------
 drivers/staging/iio/resolver/ad2s1210.h |  3 -
 2 files changed, 50 insertions(+), 45 deletions(-)
drivers/staging/iio/resolver/ad2s1210.c +28 -22
index ac13b99bd9cb..fbf0cc722979 100644
@@ -15,7 +15,7 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 
 #include <linux/iio/iio.h>
@@ -69,10 +69,21 @@ enum ad2s1210_mode {
 
 static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 };
 
+struct ad2s1210_gpio {
+	struct gpio_desc **ptr;
+	const char *name;
+	unsigned long flags;
+};
+
 struct ad2s1210_state {
 	const struct ad2s1210_platform_data *pdata;
 	struct mutex lock;
 	struct spi_device *sdev;
+	struct gpio_desc *sample;
+	struct gpio_desc *a0;
+	struct gpio_desc *a1;
+	struct gpio_desc *res0;
+	struct gpio_desc *res1;
 	unsigned int fclkin;
 	unsigned int fexcit;
 	bool hysteresis;
@@ -91,8 +102,8 @@ static const int ad2s1210_mode_vals[4][2] = {
 static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,
 				     struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->a[0], ad2s1210_mode_vals[mode][0]);
-	gpio_set_value(st->pdata->a[1], ad2s1210_mode_vals[mode][1]);
+	gpiod_set_value(st->a0, ad2s1210_mode_vals[mode][0]);
+	gpiod_set_value(st->a1, ad2s1210_mode_vals[mode][1]);
 	st->mode = mode;
 }
 
@@ -152,8 +163,8 @@ int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
 
 static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state *st)
 {
-	int resolution = (gpio_get_value(st->pdata->res[0]) << 1) |
-			  gpio_get_value(st->pdata->res[1]);
+	int resolution = (gpiod_get_value(st->res0) << 1) |
+			  gpiod_get_value(st->res1);
 
 	return ad2s1210_resolution_value[resolution];
 }
@@ -164,10 +175,10 @@ static const int ad2s1210_res_pins[4][2] = {
 
 static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->res[0],
-		       ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
-	gpio_set_value(st->pdata->res[1],
-		       ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
+	gpiod_set_value(st->res0,
+			ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
+	gpiod_set_value(st->res1,
+			ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
 }
 
 static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
@@ -401,15 +412,15 @@ static ssize_t ad2s1210_clear_fault(struct device *dev,
 	int ret;
 
 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->sample, 0);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 1);
 	ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
 	if (ret < 0)
 		goto error_ret;
-	gpio_set_value(st->pdata->sample, 0);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 0);
+	gpiod_set_value(st->sample, 1);
 error_ret:
 	mutex_unlock(&st->lock);
 
@@ -466,7 +477,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	s16 vel;
 
 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->sample, 0);
 	/* delay (6 * tck + 20) nano seconds */
 	udelay(1);
 
@@ -512,7 +523,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	}
 
 error_ret:
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 1);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
 	mutex_unlock(&st->lock);
@@ -630,30 +641,32 @@ static const struct iio_info ad2s1210_info = {
 
 static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
 {
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
+	int ret, i;
+	struct spi_device *spi = st->sdev;

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 655

Quoted 10 lines
drivers/staging/iio/resolver/ad2s1210.c +9 -0
+	struct ad2s1210_gpio *pin;
+	unsigned long flags = st->pdata->gpioin ? GPIOD_IN : GPIOD_OUT_LOW;
+
+	struct ad2s1210_gpio gpios[] = {
+		{.ptr = &st->sample, .name = "sample", .flags = GPIOD_IN},
+		{.ptr = &st->a0, .name = "a0", .flags = flags},
+		{.ptr = &st->a1, .name = "a1", .flags = flags},
+		{.ptr = &st->res0, .name = "res0", .flags = flags},
+		{.ptr = &st->res1, .name = "res1", .flags = flags},
 	};

I think that you should add spaces after { and before }. It's the file style from what I see.

Quoted 8 lines
drivers/staging/iio/resolver/ad2s1210.c +0 -7
-	return gpio_request_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
-}
-
-static void ad2s1210_free_gpios(struct ad2s1210_state *st)
-{
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 660

Quoted 10 lines
drivers/staging/iio/resolver/ad2s1210.c +4 -6
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
-	};
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		pin = &gpios[i];
+		*pin->ptr = devm_gpiod_get(&spi->dev, pin->name,
+					   pin->flags);

This can now fit into one line.

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 661

Quoted 1 line
drivers/staging/iio/resolver/ad2s1210.c +1 -0
+		if (IS_ERR(pin->ptr)) {

Here you are checking the wrong pointer. Also notice the line below.

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 664

Quoted 3 lines
drivers/staging/iio/resolver/ad2s1210.c +3 -0
+			ret = PTR_ERR(pin->ptr);
+			dev_err(&spi->dev, "Failed to request %s GPIO: %d\n",
+				pin->name, ret);

Please notice how other dev_err looks like in this code. Align the message to the existing format.

Quoted 51 lines
drivers/staging/iio/resolver/ad2s1210.c +5 -7
+			return ret;
+		}
+	}
 
-	gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
+	return 0;
 }
 
 static int ad2s1210_probe(struct spi_device *spi)
@@ -692,7 +705,7 @@ static int ad2s1210_probe(struct spi_device *spi)
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_gpios;
+		return ret;
 
 	st->fclkin = spi->max_speed_hz;
 	spi->mode = SPI_MODE_3;
@@ -700,10 +713,6 @@ static int ad2s1210_probe(struct spi_device *spi)
 	ad2s1210_initial(st);
 
 	return 0;
-
-error_free_gpios:
-	ad2s1210_free_gpios(st);
-	return ret;
 }
 
 static int ad2s1210_remove(struct spi_device *spi)
@@ -711,7 +720,6 @@ static int ad2s1210_remove(struct spi_device *spi)
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 
 	iio_device_unregister(indio_dev);
-	ad2s1210_free_gpios(iio_priv(indio_dev));
 
 	return 0;
 }
drivers/staging/iio/resolver/ad2s1210.h +0 -3
index e9b2147701fc..63d479b20a6c 100644
@@ -12,9 +12,6 @@
 #define _AD2S1210_H
 
 struct ad2s1210_platform_data {
-	unsigned int		sample;
-	unsigned int		a[2];
-	unsigned int		res[2];
 	bool			gpioin;
 };
 #endif /* _AD2S1210_H */
Signature · 1 line
Slawomir Stepien
#2 lore raw
Quoted 155 lines · Slawomir Stepien
Quoted 2 lines · Nishad Kamdar

Use the gpiod interface instead of the deprecated old non-descriptor interface.

Hi Nishad

Few more comments from me below.

Quoted 147 lines

---
Changes in v3:
- Use a pointer to pointer for gpio_desc in struct ad2s1210_gpio as it will be used to modify a pointer.
- Use dot notation to initialize the structure.
- Use a pointer variable to avoid writing gpios[i].
Changes in v2:
- Use the spi_device struct embedded in st instead of passing it as an argument to ad2s1210_setup_gpios().
- Use an array of structs to reduce redundant code in in ad2s1210_setup_gpios().
- Remove ad2s1210_free_gpios() as devm API is being used.

---
 drivers/staging/iio/resolver/ad2s1210.c | 92 ++++++++++++++-----------
 drivers/staging/iio/resolver/ad2s1210.h |  3 -
 2 files changed, 50 insertions(+), 45 deletions(-)
drivers/staging/iio/resolver/ad2s1210.c +33 -22
index ac13b99bd9cb..fbf0cc722979 100644
@@ -15,7 +15,7 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 
 #include <linux/iio/iio.h>
@@ -69,10 +69,21 @@ enum ad2s1210_mode {
 
 static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 };
 
+struct ad2s1210_gpio {
+	struct gpio_desc **ptr;
+	const char *name;
+	unsigned long flags;
+};
+
 struct ad2s1210_state {
 	const struct ad2s1210_platform_data *pdata;
 	struct mutex lock;
 	struct spi_device *sdev;
+	struct gpio_desc *sample;
+	struct gpio_desc *a0;
+	struct gpio_desc *a1;
+	struct gpio_desc *res0;
+	struct gpio_desc *res1;
 	unsigned int fclkin;
 	unsigned int fexcit;
 	bool hysteresis;
@@ -91,8 +102,8 @@ static const int ad2s1210_mode_vals[4][2] = {
 static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,
 				     struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->a[0], ad2s1210_mode_vals[mode][0]);
-	gpio_set_value(st->pdata->a[1], ad2s1210_mode_vals[mode][1]);
+	gpiod_set_value(st->a0, ad2s1210_mode_vals[mode][0]);
+	gpiod_set_value(st->a1, ad2s1210_mode_vals[mode][1]);
 	st->mode = mode;
 }
 
@@ -152,8 +163,8 @@ int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
 
 static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state *st)
 {
-	int resolution = (gpio_get_value(st->pdata->res[0]) << 1) |
-			  gpio_get_value(st->pdata->res[1]);
+	int resolution = (gpiod_get_value(st->res0) << 1) |
+			  gpiod_get_value(st->res1);
 
 	return ad2s1210_resolution_value[resolution];
 }
@@ -164,10 +175,10 @@ static const int ad2s1210_res_pins[4][2] = {
 
 static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->res[0],
-		       ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
-	gpio_set_value(st->pdata->res[1],
-		       ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
+	gpiod_set_value(st->res0,
+			ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
+	gpiod_set_value(st->res1,
+			ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
 }
 
 static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
@@ -401,15 +412,15 @@ static ssize_t ad2s1210_clear_fault(struct device *dev,
 	int ret;
 
 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->sample, 0);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 1);
 	ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
 	if (ret < 0)
 		goto error_ret;
-	gpio_set_value(st->pdata->sample, 0);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 0);
+	gpiod_set_value(st->sample, 1);
 error_ret:
 	mutex_unlock(&st->lock);
 
@@ -466,7 +477,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	s16 vel;
 
 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->sample, 0);
 	/* delay (6 * tck + 20) nano seconds */
 	udelay(1);
 
@@ -512,7 +523,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	}
 
 error_ret:
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->sample, 1);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
 	mutex_unlock(&st->lock);
@@ -630,30 +641,32 @@ static const struct iio_info ad2s1210_info = {
 
 static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
 {
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
+	int ret, i;
+	struct spi_device *spi = st->sdev;
+	struct ad2s1210_gpio *pin;
+	unsigned long flags = st->pdata->gpioin ? GPIOD_IN : GPIOD_OUT_LOW;
+
+	struct ad2s1210_gpio gpios[] = {
+		{.ptr = &st->sample, .name = "sample", .flags = GPIOD_IN},
Quoted 8 lines

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 655

Quoted 5 lines
drivers/staging/iio/resolver/ad2s1210.c +4 -0
+		{.ptr = &st->a0, .name = "a0", .flags = flags},
+		{.ptr = &st->a1, .name = "a1", .flags = flags},
+		{.ptr = &st->res0, .name = "res0", .flags = flags},
+		{.ptr = &st->res1, .name = "res1", .flags = flags},
 	};

I think that you should add spaces after { and before }. It's the file style from what I see.

Ok. I'll do that.

Quoted 22 lines
Quoted 9 lines
drivers/staging/iio/resolver/ad2s1210.c +0 -7
-	return gpio_request_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
-}
-
-static void ad2s1210_free_gpios(struct ad2s1210_state *st)
-{
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 660

Quoted 10 lines
drivers/staging/iio/resolver/ad2s1210.c +4 -6
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
-	};
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		pin = &gpios[i];
+		*pin->ptr = devm_gpiod_get(&spi->dev, pin->name,
+					   pin->flags);

This can now fit into one line.

Quoted 4 lines

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 661

Quoted 1 line
drivers/staging/iio/resolver/ad2s1210.c +1 -0
+		if (IS_ERR(pin->ptr)) {

Here you are checking the wrong pointer. Also notice the line below.

Yes. I'll change that.

Quoted 7 lines

drivers/staging/iio/resolver/ad2s1210.c static const struct iio_info ad2s1210_info = { · line 664

Quoted 3 lines
drivers/staging/iio/resolver/ad2s1210.c +3 -0
+			ret = PTR_ERR(pin->ptr);
+			dev_err(&spi->dev, "Failed to request %s GPIO: %d\n",
+				pin->name, ret);

Please notice how other dev_err looks like in this code. Align the message to the existing format.

Ok. I'll do that.

Quoted 44 lines
Quoted 44 lines
drivers/staging/iio/resolver/ad2s1210.c +5 -7
+			return ret;
+		}
+	}
 
-	gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
+	return 0;
 }
 
 static int ad2s1210_probe(struct spi_device *spi)
@@ -692,7 +705,7 @@ static int ad2s1210_probe(struct spi_device *spi)
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_gpios;
+		return ret;
 
 	st->fclkin = spi->max_speed_hz;
 	spi->mode = SPI_MODE_3;
@@ -700,10 +713,6 @@ static int ad2s1210_probe(struct spi_device *spi)
 	ad2s1210_initial(st);
 
 	return 0;
-
-error_free_gpios:
-	ad2s1210_free_gpios(st);
-	return ret;
 }
 
 static int ad2s1210_remove(struct spi_device *spi)
@@ -711,7 +720,6 @@ static int ad2s1210_remove(struct spi_device *spi)
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);
 
 	iio_device_unregister(indio_dev);
-	ad2s1210_free_gpios(iio_priv(indio_dev));
 
 	return 0;
 }
drivers/staging/iio/resolver/ad2s1210.h +0 -0
index e9b2147701fc..63d479b20a6c 100644
@@ -12,9 +12,6 @@
 #define _AD2S1210_H
 
Quoted 10 lines
Quoted 7 lines
drivers/staging/iio/resolver/ad2s1210.h +0 -3
 struct ad2s1210_platform_data {
-	unsigned int		sample;
-	unsigned int		a[2];
-	unsigned int		res[2];
 	bool			gpioin;
 };
 #endif /* _AD2S1210_H */
Signature · 1 line
Slawomir Stepien

Thanks for the review.

regards,
Nishad