nand: fix up badblock skipping
Subsystems (3)
PATCH 1/1 nand: fix up badblock skipping
From: Jiri Valek <[email protected]>
Currently the badblock skipping fails. SPL loader fails to boot from NAND. End up on message "SPL: failed to boot from all boot devices"
---
drivers/mtd/nand/raw/mxs_nand_spl.c | 1 + 1 file changed, 1 insertion(+)
drivers/mtd/nand/raw/mxs_nand_spl.c +1 -0
@@ -239,6 +239,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf)*/ while (is_badblock (mtd, offs,1 )) { page = page + nand_page_per_block; + offs = offs + mtd.erasesize;/* Check i we've reached the end of flash. */ if (page >= mtd->size >> chip->page_shift)return -ENOMEM ;
Signature · 1 line
2.11.0
Miquel Raynal
maintainerPATCH 1/1 nand: fix up badblock skipping
Hi Jiri,
Jiri Valek <[email protected]> wrote on Fri, 19 Oct 2018 10:15:55 +0200:
Quoted 16 lines
From: Jiri Valek <[email protected]>
Currently the badblock skipping fails. SPL loader fails to boot from NAND. End up on message "SPL: failed to boot from all boot devices"
Signed-off-by Jiri Valek <[email protected]>---
drivers/mtd/nand/raw/mxs_nand_spl.c | 1 + 1 file changed, 1 insertion(+)drivers/mtd/nand/raw/mxs_nand_spl.c +0
-0
drivers/mtd/nand/raw/mxs_nand_spl.c int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf) · line 245
Quoted 7 lines
drivers/mtd/nand/raw/mxs_nand_spl.c +1
-0@@ -239,6 +239,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf)*/ while (is_badblock (mtd, offs,1 )) { page = page + nand_page_per_block; + offs = offs + mtd.erasesize;/* Check i we've reached the end of flash. */ if (page >= mtd->size >> chip->page_shift)return -ENOMEM ;
Thanks,
Miquèl
PATCH 1/1 nand: fix up badblock skipping
Hi Jiri, Miquel,
Quoted 16 lines · Miquel Raynal
Hi Jiri,
Jiri Valek <[email protected]> wrote on Fri, 19 Oct 2018 10:15:55 +0200:
Quoted 11 lines
From: Jiri Valek <[email protected]>
Currently the badblock skipping fails. SPL loader fails to boot from NAND. End up on message "SPL: failed to boot from all boot devices"
Signed-off-by Jiri Valek <[email protected]>---
drivers/mtd/nand/raw/mxs_nand_spl.c | 1 + 1 file changed, 1 insertion(+)
Quoted 15 lines
drivers/mtd/nand/raw/mxs_nand_spl.c int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf) · line 245
Quoted 12 lines
drivers/mtd/nand/raw/mxs_nand_spl.c +1
-0@@ -239,6 +239,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf)*/ while (is_badblock (mtd, offs,1 )) { page = page + nand_page_per_block; + offs = offs + mtd.erasesize;/* Check i we've reached the end of flash. */ if (page >= mtd->size >> chip->page_shift)return -ENOMEM ;Reviewed-by Miquel Raynal <[email protected]>
I agree that secto must be skipped, but implementation looks wrong. mtd is a pointer, and the above line should be off + mtd->erasesize. Do you build with it ? I tried to apply it, as expected it cannot be compiled clean.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 1/1 nand: fix up badblock skipping
Hi all,
yes you are right. I had checked out older version of u-boot. off + mtd->erasesize
this is OK. I`m sending patch v2.
Quoted 35 lines · Stefano Babic
Hi Jiri, Miquel,
Quoted 16 lines · Miquel Raynal
Hi Jiri,
Jiri Valek <[email protected]> wrote on Fri, 19 Oct 2018 10:15:55 +0200:
Quoted 11 lines
From: Jiri Valek <[email protected]>
Currently the badblock skipping fails. SPL loader fails to boot from NAND. End up on message "SPL: failed to boot from all boot devices"
Signed-off-by Jiri Valek <[email protected]>---
drivers/mtd/nand/raw/mxs_nand_spl.c | 1 + 1 file changed, 1 insertion(+)Quoted 15 lines
drivers/mtd/nand/raw/mxs_nand_spl.c int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf) · line 245
Quoted 12 lines
drivers/mtd/nand/raw/mxs_nand_spl.c +1
-0@@ -239,6 +239,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf)*/ while (is_badblock (mtd, offs,1 )) { page = page + nand_page_per_block; + offs = offs + mtd.erasesize;/* Check i we've reached the end of flash. */ if (page >= mtd->size >> chip->page_shift)return -ENOMEM ;Reviewed-by Miquel Raynal <[email protected]>
Quoted 8 lines
I agree that secto must be skipped, but implementation looks wrong. mtd is a pointer, and the above line should be off +
mtd->erasesize. Do you build with it ? I tried to apply it, as expected it cannot be compiled clean.Best regards,
Stefano Babic
---
Changes for v2:
- Repaired "mtd" to struct pinter
drivers/mtd/nand/raw/mxs_nand_spl.c | 1 + 1 file changed, 1 insertion(+)
(quoted diff) +0 -0
b/drivers/mtd/nand/raw/mxs_nand_spl.c
index c628f3adec..ddaaba87a3 100644
drivers/mtd/nand/raw/mxs_nand_spl.c +0 -0
@@ -240,6 +240,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int
size, void *buf)
*/
while (is_badblock(mtd, offs, 1)) {
page = page + nand_page_per_block;
+ offs = offs + mtd->erasesize;
/* Check i we've reached the end of flash. */ if (page >= mtd->size >> chip->page_shift)
return -ENOMEM;
Signature · 1 line
2.11.0