Support RTC charging on PFUZE100
PATCH 1/1 Support RTC charging on PFUZE100
arch/arm/boot/dts/imx6-logicpd-som.dtsi +6 -0
@@ -178,6 +178,12 @@ regulator-max-microvolt = <2500000>; regulator-always-on; }; + + coin_reg: coin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; };
drivers/regulator/pfuze100-regulator.c +2 -0
@@ -324,6 +324,7 @@ static struct pfuze_regulator pfuze100_regulators[] = {PFUZE100_VGEN_REG (PFUZE100 ,VGEN4 ,PFUZE100_VGEN4VOL ,1800000 ,3300000 ,100000 ),PFUZE100_VGEN_REG (PFUZE100 ,VGEN5 ,PFUZE100_VGEN5VOL ,1800000 ,3300000 ,100000 ),PFUZE100_VGEN_REG (PFUZE100 ,VGEN6 ,PFUZE100_VGEN6VOL ,1800000 ,3300000 ,100000 ), + PFUZE100_COIN_REG(PFUZE200, COIN, PFUZE100_COINVOL, 0x7, pfuze100_coin), }; static struct pfuze_regulator pfuze200_regulators[] = {
@@ -377,6 +378,7 @@ static struct of_regulator_match pfuze100_matches[] = { { .name = "vgen4", }, { .name = "vgen5", }, { .name = "vgen6", }, + { .name = "coin", }, }; /* PFUZE200 */
Signature · 1 line
2.17.1
Mark Brown
maintainerPATCH 1/1 Support RTC charging on PFUZE100
drivers/regulator/pfuze100-regulator.c
Quoted 10 lines · Adam Ford
arch/arm/boot/dts/imx6-logicpd-som.dtsi +0
-0drivers/regulator/pfuze100-regulator.c +0
-0
Please follow the patch submission process covered insubmitting-patchest.rst. You've not included a Signed-off-by which is
essential for legal reasons as covered in there and this is a single
patch which mixes a DT change and a regulator driver change which should
be in separate patches.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181114/f0c8519c/attachment.sig>
PATCH 1/1 Support RTC charging on PFUZE100
Quoted 8 lines · Mark Brown
Quoted 5 lines · Adam Ford
arch/arm/boot/dts/imx6-logicpd-som.dtsi +0
-0
Quoted 10 lines
drivers/regulator/pfuze100-regulator.c
Quoted 4 lines
drivers/regulator/pfuze100-regulator.c +0
-0Please follow the patch submission process covered in
submitting-patchest.rst. You've not included a Signed-off-by which is essential for legal reasons as covered in there and this is a single patch which mixes a DT change and a regulator driver change which should be in separate patches.
Mark,
I think you're looking at the V1 patch. This was replaced by a V2
patch: https://patchwork.kernel.org/patch/10661227/
It should have a S-o-b line. I know I sent it to the wrong mailing list (per your other e-mail to me) , so if you want it re-mailed, I can do that.
thank you,
adam
Mark Brown
maintainerPATCH 1/1 Support RTC charging on PFUZE100
Quoted 6 lines · Adam Ford
I think you're looking at the V1 patch. This was replaced by a V2
patch: https://patchwork.kernel.org/patch/10661227/It should have a S-o-b line. I know I sent it to the wrong mailing list (per your other e-mail to me) , so if you want it re-mailed, I can do that.
Please resend the patch, I don't have anything else in my inbox.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181123/cfd168bd/attachment.sig>