arm64: defconfig: Enable QCS404 configs
PATCH 1/2 arm64: defconfig: Enable QCS404 configs
From: Bjorn Andersson <[email protected]>
Enable GCC and pin control configs to make it possible to boot the QCS404 EVBs.
--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
@@ -348,6 +348,7 @@ CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_QCS404=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_MT7622=y
@@ -600,6 +601,7 @@ CONFIG_IPQ_GCC_8074=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y +CONFIG_QCS_GCC_404=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_ARM_MHU=y
Signature · 1 line
2.14.4
PATCH 2/2 arm64: defconfig: Enable some qcom remoteproc configs
From: Bjorn Andersson <[email protected]>
Enable remoteproc configs to boot the remoteprocs on QC chipsets. These are common configs and not specific to a specific SoC so should be enabled across the board.
--- arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/configs/defconfig +6 -0
@@ -614,9 +614,15 @@ CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y CONFIG_QCOM_IOMMU=y +CONFIG_REMOTEPROC=m +CONFIG_QCOM_ADSP_PIL=m +CONFIG_QCOM_Q6V5_PIL=m +CONFIG_QCOM_SYSMON=m CONFIG_RPMSG_QCOM_GLINK_RPM=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y CONFIG_RASPBERRYPI_POWER=y +CONFIG_QCOM_GLINK_SSR=m CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y
Signature · 1 line
2.14.4
Re: [PATCH 2/2] arm64: defconfig: Enable some qcom remoteproc configs
Quoted 17 lines · Vinod Koul
From: Bjorn Andersson <[email protected]>
Enable remoteproc configs to boot the remoteprocs on QC chipsets. These are common configs and not specific to a specific SoC so should be enabled across the board.
Signed-off-by Bjorn Andersson <[email protected]>Signed-off-by Vinod Koul <[email protected]>--- arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+)arch/arm64/configs/defconfig +0
-0
arch/arm64/configs/defconfig CONFIG_TEGRA_IOMMU_SMMU=y · line 618
Quoted 5 lines
arch/arm64/configs/defconfig +2
-0@@ -614,9 +614,15 @@ CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y CONFIG_QCOM_IOMMU=y +CONFIG_REMOTEPROC=m +CONFIG_QCOM_ADSP_PIL=m
This is now CONFIG_QCOM_Q6V5_PAS
arch/arm64/configs/defconfig CONFIG_TEGRA_IOMMU_SMMU=y · line 619
Quoted 1 line
arch/arm64/configs/defconfig +1
-0+CONFIG_QCOM_Q6V5_PIL=m
and CONFIG_QCOM_Q6V5_MSS
arch/arm64/configs/defconfig CONFIG_TEGRA_IOMMU_SMMU=y · line 628
Quoted 9 lines
arch/arm64/configs/defconfig +3
-0+CONFIG_QCOM_SYSMON=m CONFIG_RPMSG_QCOM_GLINK_RPM=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=m CONFIG_RPMSG_QCOM_SMD=y CONFIG_RASPBERRYPI_POWER=y +CONFIG_QCOM_GLINK_SSR=m CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y
Apart from that this looks good.
Regards,
Bjorn
Re: [PATCH 2/2] arm64: defconfig: Enable some qcom remoteproc configs
Quoted 27 lines · Bjorn Andersson
Quoted 17 lines · Vinod Koul
From: Bjorn Andersson <[email protected]>
Enable remoteproc configs to boot the remoteprocs on QC chipsets. These are common configs and not specific to a specific SoC so should be enabled across the board.
Signed-off-by Bjorn Andersson <[email protected]>Signed-off-by Vinod Koul <[email protected]>--- arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+)arch/arm64/configs/defconfig +0
-0arch/arm64/configs/defconfig CONFIG_TEGRA_IOMMU_SMMU=y · line 618
Quoted 5 lines
arch/arm64/configs/defconfig +2
-0@@ -614,9 +614,15 @@ CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y CONFIG_QCOM_IOMMU=y +CONFIG_REMOTEPROC=m +CONFIG_QCOM_ADSP_PIL=mThis is now
CONFIG_QCOM_Q6V5_PAS
Quoted 3 lines
arch/arm64/configs/defconfig CONFIG_TEGRA_IOMMU_SMMU=y · line 619
Quoted 1 line
arch/arm64/configs/defconfig +1
-0+CONFIG_QCOM_Q6V5_PIL=mand
CONFIG_QCOM_Q6V5_MSS
Sure I will update this
Signature · 1 line
~Vinod