staging: typec: fusb302: Rename fcs,extcon-name to linux,extcon-name

Since we are going to use the same in Designware USB 3 driver, rename the property to be consistent across the drivers.

No functional change intended.

Signed-off-by Andy Shevchenko <[email protected]>

Cc Hans de Goede <[email protected]>

Cc Guenter Roeck <[email protected]>

Acked-by Hans de Goede <[email protected]>

Acked-by Guenter Roeck <[email protected]>

---
 drivers/platform/x86/intel_cht_int33fe.c | 2 +-
 drivers/usb/typec/tcpm/fusb302.c         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

drivers/platform/x86/intel_cht_int33fe.c +1 -1

index 464fe93657b5..87cbf18d0305 100644
@@ -79,7 +79,7 @@ static const struct property_entry max17047_props[] = {
 };
 
 static const struct property_entry fusb302_props[] = {
-	PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"),
+	PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
 	PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000),
 	PROPERTY_ENTRY_U32("fcs,max-sink-microamp",   3000000),
 	PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000),

drivers/usb/typec/tcpm/fusb302.c +1 -1

index 43b64d9309d0..e9344997329c 100644
@@ -1765,7 +1765,7 @@ static int fusb302_probe(struct i2c_client *client,
 	 * to be set by the platform code which also registers the i2c client
 	 * for the fusb302.
 	 */
-	if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) {
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
 		chip->extcon = extcon_get_extcon_dev(name);
 		if (!chip->extcon)
 			return -EPROBE_DEFER;

Signature · 1 line

2.19.1