configs: kirkwood: Convert Allied Telesis boards to DM_SPI

PATCH New Chris Packham 2 participants 9 messages Nov 21, 2018 – Nov 30, 2018

lore

Share & tools

lore

Chris Packham

author

2018-11-21 09:22 UTC #0 lore raw

PATCH 1/3 configs: kirkwood: Convert Allied Telesis boards to DM_SPI

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by Chris Packham <[email protected]>

---

 configs/SBx81LIFKW_defconfig   | 2 ++
 configs/SBx81LIFXCAT_defconfig | 2 ++
 2 files changed, 4 insertions(+)

configs/SBx81LIFKW_defconfig +2 -0

index 99526c185e20..e0ce1595c5ee 100644
@@ -28,6 +28,7 @@ CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

@@ -40,4 +41,5 @@ CONFIG_MII=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_MV=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y

configs/SBx81LIFXCAT_defconfig +2 -0

index a0abe23ed328..4a6e05844fec 100644
@@ -32,6 +32,7 @@ CONFIG_I2C_MUX_PCA954x=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

@@ -42,4 +43,5 @@ CONFIG_MV88E61XX_PHY_PORTS=0x003
 CONFIG_MV88E61XX_FIXED_PORTS=0x300
 CONFIG_MII=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y

Signature · 1 line

2.19.1

Chris Packham

author

2018-11-21 09:22 UTC #1 lore raw

PATCH 2/3 configs: kirkwood: ds109: Convert to DM_SPI

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by Chris Packham <[email protected]>

---

 configs/ds109_defconfig | 2 ++
 include/configs/ds109.h | 1 -
 2 files changed, 2 insertions(+), 1 deletion(-)

configs/ds109_defconfig +2 -0

index 23f1886a249a..352403e57385 100644
@@ -23,6 +23,7 @@ CONFIG_MVSATA_IDE=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_STMICRO=y

@@ -32,6 +33,7 @@ CONFIG_DM_RTC=y
 CONFIG_RTC_MV=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y

include/configs/ds109.h +0 -1

index c06f0058deb5..2c7928e88c1c 100644
@@ -38,7 +38,6 @@
 #endif
 
 #ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI			1
 #define CONFIG_ENV_SPI_BUS		0
 #define CONFIG_ENV_SPI_CS		0
 #define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */

Signature · 1 line

2.19.1

Stefan Roese

2018-11-22 08:37 UTC #2 lore raw

PATCH 2/3 configs: kirkwood: ds109: Convert to DM_SPI

Quoted 35 lines · Chris Packham

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by Chris Packham <[email protected]>

---

  configs/ds109_defconfig | 2 ++
  include/configs/ds109.h | 1 -
  2 files changed, 2 insertions(+), 1 deletion(-)

configs/ds109_defconfig +2 -0

index 23f1886a249a..352403e57385 100644
@@ -23,6 +23,7 @@ CONFIG_MVSATA_IDE=y
  CONFIG_DM_I2C=y
  CONFIG_SYS_I2C_MVTWSI=y
  # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
  CONFIG_SPI_FLASH=y
  CONFIG_SPI_FLASH_BAR=y
  CONFIG_SPI_FLASH_STMICRO=y

@@ -32,6 +33,7 @@ CONFIG_DM_RTC=y
  CONFIG_RTC_MV=y
  CONFIG_SYS_NS16550=y
  CONFIG_SPI=y
+CONFIG_DM_SPI=y
  CONFIG_KIRKWOOD_SPI=y
  CONFIG_USB=y
  CONFIG_USB_EHCI_HCD=y

include/configs/ds109.h +0 -0

index c06f0058deb5..2c7928e88c1c 100644

include/configs/ds109.h line 43

Quoted 7 lines

include/configs/ds109.h +0 -1

@@ -38,7 +38,6 @@
  #endif
 
  #ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI			1
  #define CONFIG_ENV_SPI_BUS		0
  #define CONFIG_ENV_SPI_CS		0
  #define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */

Reviewed-by Stefan Roese <[email protected]>

Thanks,
Stefan

Stefan Roese

2018-11-30 14:39 UTC #3 lore raw

PATCH 2/3 configs: kirkwood: ds109: Convert to DM_SPI

In reply to Chris Packham

Quoted 3 lines · Chris Packham

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
Signed-off-by Chris Packham <[email protected]>

Applied to u-boot-marvell/master.

Thanks,
Stefan

Chris Packham

author

2018-11-21 09:22 UTC #4 lore raw

PATCH 3/3 configs: kirkwood: dreamplug: Convert to DM_SPI

In reply to Chris Packham

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by Chris Packham <[email protected]>

---

 configs/dreamplug_defconfig | 2 ++
 include/configs/dreamplug.h | 1 -
 2 files changed, 2 insertions(+), 1 deletion(-)

configs/dreamplug_defconfig +2 -0

index 76c768006d35..d3263cf9cd3f 100644
@@ -26,6 +26,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
 CONFIG_MVSATA_IDE=y
 # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_MVGBE=y

@@ -34,6 +35,7 @@ CONFIG_DM_RTC=y
 CONFIG_RTC_MV=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y

include/configs/dreamplug.h +0 -1

index 1c94bf9fa1bf..f4d717213ce1 100644
@@ -35,7 +35,6 @@
 #endif
 
 #ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI			1
 #define CONFIG_ENV_SPI_BUS		0
 #define CONFIG_ENV_SPI_CS		0
 #define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */

Signature · 1 line

2.19.1

Stefan Roese

2018-11-22 08:38 UTC #5 lore raw

PATCH 3/3 configs: kirkwood: dreamplug: Convert to DM_SPI

Quoted 35 lines · Chris Packham

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by Chris Packham <[email protected]>

---

  configs/dreamplug_defconfig | 2 ++
  include/configs/dreamplug.h | 1 -
  2 files changed, 2 insertions(+), 1 deletion(-)

configs/dreamplug_defconfig +2 -0

index 76c768006d35..d3263cf9cd3f 100644
@@ -26,6 +26,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
  CONFIG_DM=y
  CONFIG_MVSATA_IDE=y
  # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
  CONFIG_SPI_FLASH=y
  CONFIG_SPI_FLASH_MACRONIX=y
  CONFIG_MVGBE=y

@@ -34,6 +35,7 @@ CONFIG_DM_RTC=y
  CONFIG_RTC_MV=y
  CONFIG_SYS_NS16550=y
  CONFIG_SPI=y
+CONFIG_DM_SPI=y
  CONFIG_KIRKWOOD_SPI=y
  CONFIG_USB=y
  CONFIG_USB_EHCI_HCD=y

include/configs/dreamplug.h +0 -0

index 1c94bf9fa1bf..f4d717213ce1 100644

include/configs/dreamplug.h line 40

Quoted 7 lines

include/configs/dreamplug.h +0 -1

@@ -35,7 +35,6 @@
  #endif
 
  #ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI			1
  #define CONFIG_ENV_SPI_BUS		0
  #define CONFIG_ENV_SPI_CS		0
  #define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */

Reviewed-by Stefan Roese <[email protected]>

Thanks,
Stefan

Stefan Roese

2018-11-30 14:39 UTC #6 lore raw

PATCH 3/3 configs: kirkwood: dreamplug: Convert to DM_SPI

In reply to Chris Packham

Quoted 3 lines · Chris Packham

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
Signed-off-by Chris Packham <[email protected]>

Applied to u-boot-marvell/master.

Thanks,
Stefan

Stefan Roese

2018-11-22 08:37 UTC #7 lore raw

PATCH 1/3 configs: kirkwood: Convert Allied Telesis boards to DM_SPI

In reply to Chris Packham

Quoted 41 lines · Chris Packham

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.

Signed-off-by Chris Packham <[email protected]>

---

  configs/SBx81LIFKW_defconfig   | 2 ++
  configs/SBx81LIFXCAT_defconfig | 2 ++
  2 files changed, 4 insertions(+)

configs/SBx81LIFKW_defconfig +2 -0

index 99526c185e20..e0ce1595c5ee 100644
@@ -28,6 +28,7 @@ CONFIG_SYS_I2C_MVTWSI=y
  CONFIG_I2C_MUX=y
  CONFIG_I2C_MUX_PCA954x=y
  # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
  CONFIG_SPI_FLASH=y
  CONFIG_SPI_FLASH_STMICRO=y
  # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

@@ -40,4 +41,5 @@ CONFIG_MII=y
  CONFIG_DM_RTC=y
  CONFIG_RTC_MV=y
  CONFIG_SPI=y
+CONFIG_DM_SPI=y
  CONFIG_KIRKWOOD_SPI=y

configs/SBx81LIFXCAT_defconfig +1 -0

index a0abe23ed328..4a6e05844fec 100644
@@ -32,6 +32,7 @@ CONFIG_I2C_MUX_PCA954x=y
  CONFIG_LED=y
  CONFIG_LED_GPIO=y
  # CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
  CONFIG_SPI_FLASH=y
  CONFIG_SPI_FLASH_STMICRO=y
  # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set

configs/SBx81LIFXCAT_defconfig CONFIG_MV88E61XX_PHY_PORTS=0x003 · line 47

Quoted 5 lines

configs/SBx81LIFXCAT_defconfig +1 -0

@@ -42,4 +43,5 @@ CONFIG_MV88E61XX_PHY_PORTS=0x003
  CONFIG_MV88E61XX_FIXED_PORTS=0x300
  CONFIG_MII=y
  CONFIG_SPI=y
+CONFIG_DM_SPI=y
  CONFIG_KIRKWOOD_SPI=y

Reviewed-by Stefan Roese <[email protected]>

Thanks,
Stefan

Stefan Roese

2018-11-30 14:38 UTC #8 lore raw

PATCH 1/3 configs: kirkwood: Convert Allied Telesis boards to DM_SPI

In reply to Chris Packham

Quoted 3 lines · Chris Packham

Enable CONFIG_DM_SPI=y and CONFIG_DM_SPI_FLASH=y in the defconfig.
Signed-off-by Chris Packham <[email protected]>

Applied to u-boot-marvell/master.

Thanks,
Stefan