Skip to contentSkip to conversation

orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11

PATCH New Peter Korsgaard 2 participants 3 messages Nov 23, 2018

lore
Share & tools
lore

Peter Korsgaard

author
#0 lore raw

PATCH 1/2 orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11

4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the driver for the sy8106a regulator used on the board or enable the ondemand cpufreq govenor so the frequency is dynamically adjusted - So enable these in linux.fragment.

Signed-off-by Peter Korsgaard <[email protected]>

---
Changes since v1:
- Enable ondemand govenor so CPU frequency is actually dynamically adjusted

 board/orangepi/orangepi-pc/linux.fragment | 2 ++
 configs/orangepi_pc_defconfig             | 6 +++---
 2 files changed, 5 insertions(+), 3 deletions(-)
board/orangepi/orangepi-pc/linux.fragment +2 -0
index cdd522452a..581b715bd5 100644
@@ -1,3 +1,5 @@
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_REGULATOR_SY8106A=y
 CONFIG_DRM_SUN8I_DW_HDMI=y
 CONFIG_SUN8I_DE2_CCU=y
 CONFIG_SND_SUN8I_CODEC_ANALOG=y
configs/orangepi_pc_defconfig +3 -3
index 313b7ab3a4..130a4e7088 100644
@@ -1,7 +1,7 @@
 BR2_arm=y
 BR2_cortex_a7=y
 BR2_ARM_FPU_VFPV4=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
 BR2_TARGET_GENERIC_HOSTNAME="OrangePi_PC"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi PC"
 BR2_SYSTEM_DHCP="eth0"

@@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-pc/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.3"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-pc/linux.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

@@ -20,7 +20,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.11"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_pc"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
Signature · 1 line
2.11.0
author
#1 lore raw

PATCH 2/2 orangepi_zero_defconfig: bump linux to 4.19.3, u-boot to 2018.11

4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the ondemand cpufreq govenor so the frequency is dynamically adjusted - So enable it in linux-extra.config.

Signed-off-by Peter Korsgaard <[email protected]>

---
New in v2

 board/orangepi/orangepi-zero/linux-extras.config | 3 +++
 configs/orangepi_zero_defconfig                  | 6 +++---
 2 files changed, 6 insertions(+), 3 deletions(-)
board/orangepi/orangepi-zero/linux-extras.config +3 -0
index fe00af5ef7..2db241de28 100644
@@ -15,3 +15,6 @@ CONFIG_CFG80211_WEXT=y
 
 # wireless drivers
 CONFIG_WLAN=y
+
+# ondemand cpufreq governor
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
configs/orangepi_zero_defconfig +3 -3
index 87962152f3..3c65665cd1 100644
@@ -3,13 +3,13 @@ BR2_cortex_a7=y
 BR2_ARM_FPU_VFPV4=y
 BR2_GLOBAL_PATCH_DIR="board/orangepi/orangepi-zero/patches"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
 BR2_TARGET_GENERIC_HOSTNAME="OrangePi_Zero"
 BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi Zero"
 BR2_SYSTEM_DHCP="eth0"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.15"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.3"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h2-plus-orangepi-zero"

@@ -21,7 +21,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.11"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
Signature · 1 line
2.11.0
#2 lore raw

PATCH 1/2 orangepi_pc_defconfig: bump linux to 4.19.3, u-boot to 2018.11

In reply to Peter Korsgaard

Hello,

Quoted 9 lines · Peter Korsgaard

4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the driver for the sy8106a regulator used on the board or enable the ondemand cpufreq govenor so the frequency is dynamically adjusted - So enable these in linux.fragment.

Signed-off-by Peter Korsgaard <[email protected]>

---
Changes since v1:
- Enable ondemand govenor so CPU frequency is actually dynamically adjusted

Both applied to next.

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com